A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. TestEmail param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. Search param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPowerLed param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetPtzPatrol param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetRec param is not object. An attacker can send an HTTP request to trigger this vulnerability.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetPtzSerial param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetNorm param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetEnc param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPtzTattern param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetMdState param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. Disconnect param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. DelUser param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. AddUser param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPtzSerial param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the netserver recv_command functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted network request can lead to a reboot. An attacker can send a malicious packet to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi Upgrade API functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

An incorrect default permission vulnerability exists in the cgiserver.cgi cgi_check_ability functionality of reolink RLC-410W v3.0.0.136_20121102. In cgi_check_ability the Format API does not have a specific case, the user permission will default to 7. This will give non-administrative users the possibility to format the SD card and reboot the device.

A memory corruption vulnerability exists in the netserver parse_command_list functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to an out-of-bounds write. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi API command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted series of HTTP requests can lead to denial of service. An attacker can send an HTTP request to trigger this vulnerability.

The SNMP module in Cisco IOS XE 3.5E allows remote authenticated users to cause a denial of service (device reload) by polling frequently, aka Bug ID CSCug65204.

The SIP implementation in Cisco Unified Communications Manager (CM) 8.6(.2) and earlier allows remote authenticated users to cause a denial of service (process crash) via a crafted SIP message that is not properly handled during processing of an XML document, aka Bug ID CSCtq76428.

Cisco IOS allows remote authenticated users to cause a denial of service (device reload) via malformed IPsec packets, aka Bug ID CSCui79745.

Y-Cam camera models SD range YCB003, YCK003, and YCW003; S range YCB004, YCK004, YCW004; EyeBall YCEB03; Bullet VGA YCBL03 and YCBLB3; Bullet HD 720 YCBLHD5; Y-cam Classic Range YCB002, YCK002, and YCW003; and Y-cam Original Range YCB001, YCW001, running firmware 4.30 and earlier, allow remote authenticated users to cause a denial of service (reboot) via a malformed (1) path parameter to en/store_main.asp, (2) item parameter to en/account/accedit.asp, or (3) emailid parameter to en/smtpclient.asp. NOTE: this issue can be exploited without authentication by leveraging CVE-2014-1900.

A vulnerability has been identified in SCALANCE X300 (All versions < V4.0.0), SCALANCE X408 (All versions < V4.0.0), SCALANCE X414 (All versions). The web interface on port 443/tcp could allow an attacker to cause a Denial-of-Service condition by sending specially crafted packets to the web server. The device will automatically reboot, impacting network availability for other devices. An attacker must have network access to port 443/tcp to exploit the vulnerability. Neither valid credentials nor interaction by a legitimate user is required to exploit the vulnerability. There is no confidentiality or integrity impact, only availability is temporarily impacted. This vulnerability could be triggered by publicly available tools.

Cisco Intrusion Prevention System (IPS) Software allows remote attackers to cause a denial of service (MainApp process outage) via malformed SNMP packets, aka Bug IDs CSCum52355 and CSCul49309.

The SSL VPN implementation in Cisco IOS 15.3(1)T2 and earlier allows remote authenticated users to cause a denial of service (interface queue wedge) via crafted DTLS packets in an SSL session, aka Bug IDs CSCuh97409 and CSCud90568.

The web framework on Cisco Wireless LAN Controller (WLC) devices does not properly validate configuration parameters, which allows remote authenticated users to cause a denial of service via a crafted HTTP request, aka Bug ID CSCuh81011.

A vulnerability in the Common Open Policy Service (COPS) engine of Cisco IOS XE Software on Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to crash a device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a malformed COPS message to the device. A successful exploit could allow the attacker to crash the device.

A vulnerability in the multicast DNS (mDNS) feature of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper validation of mDNS packets. An attacker could exploit this vulnerability by sending a crafted mDNS packet to an affected device. A successful exploit could cause a device to reload, resulting in a DoS condition.

A vulnerability in the IPv6 packet processing engine of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of incoming IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet through an affected device. A successful exploit could allow the attacker to cause an unexpected reboot of the switch, leading to a DoS condition. This vulnerability is specific to IPv6 traffic. IPv4 traffic is not affected.

A vulnerability in the Flexible NetFlow Version 9 packet processor of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of parameters in a Flexible NetFlow Version 9 record. An attacker could exploit this vulnerability by sending a malformed Flexible NetFlow Version 9 packet to the Control and Provisioning of Wireless Access Points (CAPWAP) data port of an affected device. An exploit could allow the attacker to trigger an infinite loop, resulting in a process crash that would cause a reload of the device.

A security defect was identified that enabled a user of Foundry Issues to perform a Denial of Service attack by submitting malformed data in an Issue that caused loss of frontend functionality to all issue participants. This defect was resolved with the release of Foundry Issues 2.510.0 and Foundry Frontend 6.228.0.

A vulnerability in the management REST API of Cisco Industrial Network Director (IND) could allow an authenticated, remote attacker to cause the CPU utilization to increase to 100 percent, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of requests sent to the REST API. An attacker could exploit this vulnerability by sending a crafted request to the REST API. A successful exploit could allow the attacker to cause a permanent DoS condition that is due to high CPU utilization. Manual intervention may be required to recover the Cisco IND.

A vulnerability in the web interface of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition. Note: This vulnerability applies to IP Version 4 (IPv4) and IP Version 6 (IPv6) HTTP traffic.

An inaccurate frame deduplication process in ChirpStack Network Server 3.9.0 allows a malicious gateway to perform uplink Denial of Service via malformed frequency attributes in CollectAndCallOnceCollect in internal/uplink/collect.go. NOTE: the vendor's position is that there are no "guarantees that allowing untrusted LoRa gateways to the network should still result in a secure network.

Linux Linux kernel version at least v4.8 onwards, probably well before contains a Insufficient input validation vulnerability in bnx2x network card driver that can result in DoS: Network card firmware assertion takes card off-line. This attack appear to be exploitable via An attacker on a must pass a very large, specially crafted packet to the bnx2x card. This can be done from an untrusted guest VM..

A vulnerability in the Web Admin Interface of Cisco Meeting Server could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of incoming HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the Web Admin Interface of an affected Cisco Meeting Server. A successful exploit could allow the attacker to restart the system, terminating all ongoing calls and resulting in a DoS condition on the affected product. This vulnerability affects the following releases of Cisco Meeting Server: Acano X-Series, Cisco Meeting Server 1000, Cisco Meeting Server 2000. Cisco Bug IDs: CSCvi48624.

A vulnerability in the reassembly logic for fragmented IPv4 packets of Cisco StarOS running on virtual platforms could allow an unauthenticated, remote attacker to trigger a reload of the npusim process, resulting in a denial of service (DoS) condition. There are four instances of the npusim process running per Service Function (SF) instance, each handling a subset of all traffic flowing across the device. It is possible to trigger a reload of all four instances of the npusim process around the same time. The vulnerability is due to improper handling of fragmented IPv4 packets containing options. An attacker could exploit this vulnerability by sending a malicious IPv4 packet across an affected device. An exploit could allow the attacker to trigger a restart of the npusim process, which will result in all traffic queued toward this instance of the npusim process to be dropped while the process is restarting. The npusim process typically restarts within less than a second. This vulnerability affects: Cisco Virtualized Packet Core-Single Instance (VPC-SI), Cisco Virtualized Packet Core-Distributed Instance (VPC-DI), Cisco Ultra Packet Core (UPC). Cisco Bug IDs: CSCvh29613.

A vulnerability in the Transport Layer Security (TLS) library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of the affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious TLS message to an interface enabled for Secure Layer Socket (SSL) services on an affected device. Messages using SSL Version 3 (SSLv3) or SSL Version 2 (SSLv2) cannot be be used to exploit this vulnerability. An exploit could allow the attacker to cause a buffer underflow, triggering a crash on an affected device. This vulnerability affects Cisco ASA Software and Cisco FTD Software that is running on the following Cisco products: Adaptive Security Virtual Appliance (ASAv), Firepower Threat Defense Virtual (FTDv), Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCve18902, CSCve34335, CSCve38446.

A vulnerability in the ingress packet processing functionality of the Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software could allow an unauthenticated, remote attacker to cause both control function (CF) instances on an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient handling of user-supplied data by the affected software. An attacker could exploit this vulnerability by sending malicious traffic to the internal distributed instance (DI) network address on an affected system. A successful exploit could allow the attacker to cause an unhandled error condition on the affected system, which would cause the CF instances to reload and consequently cause the entire VPC to reload, resulting in the disconnection of all subscribers and a DoS condition on the affected system. This vulnerability affects Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software N4.0 through N5.5 with the Cisco StarOS operating system 19.2 through 21.3. Cisco Bug IDs: CSCve17656.

The OpenManage web application 2.5 build 1.19 on Dell PowerConnect 3348 1.2.1.3, 3524p 2.0.0.48, and 5324 2.0.1.4 switches allows remote authenticated users to cause a denial of service (device reset) via a direct request to an unspecified OSPF URL.

A vulnerability in the administrative GUI configuration feature of Cisco Wireless LAN Controller (WLC) Software could allow an aUTHENTICated, remote attacker to cause the device to reload unexpectedly during device configuration when the administrator is using this GUI, causing a denial of service (DoS) condition on an affected device. The attacker would need to have valid administrator credentials on the device. This vulnerability is due to incomplete input validation for unexpected configuration options that the attacker could submit while accessing the GUI configuration menus. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted user input when using the administrative GUI configuration feature. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Software versions prior to 8.3.150.0, 8.5.140.0, 8.8.111.0 are affected by this vulnerability.

A vulnerability in the user management functionality of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to perform a denial of service (DoS) attack against an affected system. The vulnerability is due to insufficient validation of user-provided input. An attacker could exploit this vulnerability by logging in with a highly privileged user account and performing a sequence of specific user management operations that interfere with the underlying operating system. A successful exploit could allow the attacker to permanently degrade the functionality of the affected system.

A vulnerability in the Network Address Translation - Protocol Translation (NAT-PT) feature of Junos OS on SRX series devices may allow a certain valid IPv6 packet to crash the flowd daemon. Repeated crashes of the flowd daemon can result in an extended denial of service condition for the SRX device. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D72; 12.3X48 versions prior to 12.3X48-D55; 15.1X49 versions prior to 15.1X49-D90.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuw99630, CSCvg71290, CSCvj67977.

A vulnerability in the IPv6 processing code of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of specific IPv6 hop-by-hop options. An attacker could exploit this vulnerability by sending a malicious IPv6 packet to or through the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device.

Windows Hyper-V in Windows 10 1607, 1703, and Windows Server 2016 allows a denial of service vulnerability when it fails to properly validate input from a privileged user on a guest operating system, aka "Windows Hyper-V Denial of Service Vulnerability".

A flaw was found in kube-controller-manager. This issue occurs when the initial application of a HPA config YAML lacking a .spec.behavior.scaleUp block causes a denial of service due to KCM pods going into restart churn.