Certain NETGEAR devices are affected by disclosure of sensitive information. This affects CBR40 before 2.5.0.14, RBW30 before 2.6.1.4, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBK842 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, and RBS40V before 2.6.1.4.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects R6400v2 before 1.0.2.32, R7000P/R6900P before 1.0.0.56, R7900 before 1.0.1.18, R8300 before 1.0.2.100_1.0.82, R8500 before 1.0.2.100_1.0.82, and D8500 before 1.0.3.29.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects R6400 before 1.0.1.24, R7900 before 1.0.1.18, R8000 before 1.0.3.54, and R8500 before 1.0.2.100.

The password-recovery feature on NETGEAR D3600 devices with firmware 1.0.0.49 and D6000 devices with firmware 1.0.0.49 and earlier allows remote attackers to discover the cleartext administrator password by reading the cgi-bin/passrec.asp HTML source code.

An information leak in the debuginfo.htm component of Netgear CBR40 2.5.0.28, Netgear CBK40 2.5.0.28, and Netgear CBK43 2.5.0.28 allows attackers to obtain sensitive information without any authentication required.

A vulnerability was found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this issue is some unknown functionality of the file /debuginfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. VDB-253382 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /currentsetting.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6400v2 before 1.0.4.84, R6700v3 before 1.0.4.84, R7000 before 1.0.11.126, R6900P before 1.3.2.126, and R7000P before 1.3.2.126.

An exploitable arbitrary memory read vulnerability exists in the KCodes NetUSB.ko kernel module which enables the ReadySHARE Printer functionality of at least two NETGEAR Nighthawk Routers and potentially several other vendors/products. A specially crafted index value can cause an invalid memory read, resulting in a denial of service or remote information disclosure. An unauthenticated attacker can send a crafted packet on the local network to trigger this vulnerability.

NETGEAR MR1100 devices before 12.06.08.00 are affected by disclosure of administrative credentials.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6250 before V1.0.4.8, R6400 before V1.0.1.22, R6400v2 before V1.0.2.32, R7100LG before V1.0.0.32, R7300 before V1.0.0.52, R8300 before V1.0.2.94, R8500 before V1.0.2.100, D6220 before V1.0.0.28, D6400 before V1.0.0.60, and D8500 before V1.0.3.29.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R8300 before 1.0.2.106 and R8500 before 1.0.2.106.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R6700 before 1.0.1.26, R7000 before 1.0.9.10, R7100LG before 1.0.0.32, R7900 before 1.0.1.18, R8000 before 1.0.3.54, and R8500 before 1.0.2.100.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D7800 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D6220 before 1.0.0.32, D6400 before 1.0.0.60, D8500 before 1.0.3.29, R6250 before 1.0.4.16, R6300v2 before 1.0.4.18, R6400 before 1.01.32, R6400v2 before 1.0.2.44, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7000 before 1.0.9.14, R7000P before 1.3.0.8, R6900P before 1.3.0.8, R7100LG before 1.0.0.34, R7300DST before 1.0.0.56, R7900 before 1.0.1.26, R8000 before 1.0.4.4, R8500 before 1.0.2.106, R8300 before 1.0.2.106, and WNDR3400v3 before 1.0.1.16.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects EX3700 before 1.0.0.64, EX3800 before 1.0.0.64, EX6120 before 1.0.0.32, EX6130 before 1.0.0.16, R6300v2 before 1.0.4.12, R6700 before 1.0.1.26, R6900 before 1.0.1.22, R7000 before 1.0.9.6, R7300DST before 1.0.0.52, R7900 before 1.0.1.12, R8000 before 1.0.3.24, and R8500 before 1.0.2.94.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects DST6501 before 1.1.0.6 and WNR2000v2 before 1.2.0.8.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D6220 before 1.0.0.40, D6400 before 1.0.0.74, D7000 before 1.0.1.60, D7800 before 1.0.1.34, D8500 before 1.0.3.39, DGN2200v4 before 1.0.0.94, DGN2200Bv4 before 1.0.0.94, EX6200v2 before 1.0.1.50, EX7000 before 1.0.0.56, JR6150 before 1.0.1.18, R6050 before 1.0.1.10J, R6100 before 1.0.1.16, R6150 before 1.0.1.10, R6220 before 1.1.0.50, R6250 before 1.0.4.12, R6300v2 before 1.0.4.12, R6400 before 1.0.1.24, R6400v2 before 1.0.2.32, R6700 before 1.0.1.26, R6700v2 before 1.2.0.4, R6800 before 1.0.1.10, R6900 before 1.0.1.26, R6900P before 1.0.0.58, R6900v2 before 1.2.0.4, R7000 before 1.0.9.6, R7000P before 1.0.0.58, R7100LG before 1.0.0.32, R7300 before 1.0.0.54, R7500 before 1.0.0.112, R7500v2 before 1.0.3.20, R7800 before 1.0.2.36, R7900 before 1.0.1.18, R8000 before 1.0.3.48, R8300 before 1.0.2.104, R8500 before 1.0.2.104, R9000 before 1.0.2.40, WNDR3400v3 before 1.0.1.14, WNDR3700v4 before 1.0.2.96, WNDR4300v1 before 1.0.2.98, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, and WNR3500Lv2 before 1.2.0.44.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D7800 before 1.0.1.28, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects D3600 before 1.0.0.76 and D6000 before 1.0.0.76.

An Information Disclosure vulnerability exists in the my config file in NEtGEAR WGR614 v7 and v9, which could let a malicious user recover all previously used passwords on the device, for both the control panel and WEP/WPA/WPA2, in plaintext. This is a different issue than CVE-2012-6340.

NETGEAR GS810EMX devices before 1.0.0.5 are affected by disclosure of sensitive information.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Certain NETGEAR devices are affected by disclosure of sensitive information. A UPnP request reveals a device's serial number, which can be used for a password reset. This affects D7800 before 1.0.1.66, EX2700 before 1.0.1.68, WN3000RPv2 before 1.0.0.90, WN3000RPv3 before 1.0.2.100, LBR1020 before 2.6.5.20, LBR20 before 2.6.5.32, R6700AX before 1.0.10.110, R7800 before 1.0.2.86, R8900 before 1.0.5.38, R9000 before 1.0.5.38, RAX10 before 1.0.10.110, RAX120v1 before 1.2.3.28, RAX120v2 before 1.2.3.28, RAX70 before 1.0.10.110, RAX78 before 1.0.10.110, XR450 before 2.3.2.130, XR500 before 2.3.2.130, and XR700 before 1.0.1.46.

NETGEAR ProSafe GS724Tv3 and GS716Tv2 with firmware 5.4.1.13 and earlier; GS748Tv4 with firmware 5.4.1.14; GS510TP with firmware 5.4.0.6; GS752TPS, GS728TPS, GS728TS, and GS725TS with firmware 5.3.0.17; and GS752TXS and GS728TXS with firmware 6.1.0.12 allows remote attackers to read encrypted administrator credentials and other startup configurations via a direct request to filesystem/startup-config.

An information leak in debuginfo.htm of Netgear R6850 v1.1.0.88 allows attackers to obtain sensitive information without any authentication required.

Moodle 1.8 before 1.8.11 and 1.9 before 1.9.7 stores (1) password hashes and (2) unspecified "secrets" in backup files, which might allow attackers to obtain sensitive information.

User Enumeration in Moxa ThingsPro IIoT Gateway and Device Management Software Solutions version 2.1.

CutePHP CuteNews 1.4.6 and UTF-8 CuteNews before 8b allows remote attackers to obtain sensitive information via an invalid date value in the from_date_day parameter to search.php, which reveals the installation path in an error message.

Roundcube before 1.3.7 mishandles GnuPG MDC integrity-protection warnings, which makes it easier for attackers to obtain sensitive information, a related issue to CVE-2017-17688. This is associated with plugins/enigma/lib/enigma_driver_gnupg.php.

A vulnerability was found in Keenetic KN-1010, KN-1410, KN-1711, KN-1810 and KN-1910 up to 4.1.2.15. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /version.js of the component Version Data Handler. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-261674 is the identifier assigned to this vulnerability. NOTE: The vendor is aware of this issue and plans to fix it by the end of 2024.

Mozilla Necko, as used in Firefox, SeaMonkey, and other applications, performs DNS prefetching of domain names contained in links within local HTML documents, which makes it easier for remote attackers to determine the network location of the application's user by logging DNS requests. NOTE: the vendor disputes the significance of this issue, stating "I don't think we necessarily need to worry about that case."

PHP-Proxy 5.1.0 allows remote attackers to read local files if the default "pre-installed version" (intended for users who lack shell access to their web server) is used. This occurs because the aeb067ca0aa9a3193dce3a7264c90187 app_key value from the default config.php is in place, and this value can be easily used to calculate the authorization data needed for local file inclusion.

The Dump Servlet in Mort Bay Jetty 6.x and 7.0.0 allows remote attackers to obtain sensitive information about internal variables and other data via a request to a URI ending in /dump/, as demonstrated by discovering the value of the getPathTranslated variable.

An issue was discovered in XiaoCms 20141229. /admin/index.php?c=database allows full path disclosure in a "failed to open stream" error message.

An issue was discovered in Arcserve Unified Data Protection (UDP) through 6.5 Update 4. There is a DDI-VRT-2018-20 Unauthenticated Sensitive Information Disclosure via /UDPUpdates/Config/FullUpdateSettings.xml issue.

In Vignette Content Management version 6, it is possible to gain remote access to administrator privileges by discovering the admin password in the vgn/ccb/user/mgmt/user/edit/0,1628,0,00.html?uid=admin HTML source code, and then creating a privileged user account. NOTE: this product is discontinued.

An issue was discovered in the Ascensia Contour NEXT ONE application for Android before 2019-01-15. An attacker may reverse engineer the codebase to extract sensitive data that contributes to the disclosure of medical information of patients utilizing the Ascensia platform. This occurs because of weak obfuscation.

On ASUS RT-AC58U 3.0.0.4.380_6516 devices, remote attackers can discover hostnames and IP addresses by reading dhcpLeaseInfo data in the HTML source code of the Main_Login.asp page.

IBM Jazz Team Server, as used in Rational Collaborative Lifecycle Management; Rational Quality Manager 3.x before 3.0.1.6 iFix 3, 4.x before 4.0.7, and 5.x before 5.0.1; and other Rational products, does not set the secure flag for the session cookie in an https session, which makes it easier for remote attackers to capture this cookie by intercepting its transmission within an http session.

An issue was discovered in GitLab Community and Enterprise Edition 11.1.x before 11.1.8, 11.2.x before 11.2.5, and 11.3.x before 11.3.2. There is Information Exposure via the merge request JSON endpoint.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The firewall feature makes it easier for remote attackers to ascertain credentials and firewall rules because invalid credentials lead to error -2, whereas rule-based blocking leads to error -8.

An issue was discovered in Netdata 1.10.0. Full Path Disclosure (FPD) exists via api/v1/alarms. NOTE: the vendor says "is intentional.

IBM Business Automation Workflow 18.0.0.0, 18.0.0.1, and 18.0.0.2 could allow an unauthenticated attacker to obtain sensitve information using a specially cracted HTTP request. IBM X-Force ID: 152020.

Exposure of Sensitive Information vulnerability in Bixby Vision prior to version 3.7.50.6 allows attackers to access internal data of Bixby Vision via unprotected intent.

goform/getWlanClientInfo in Orange AirBox Y858_FL_01.16_04 allows remote attackers to discover information about currently connected devices (hostnames, IP addresses, MAC addresses, and connection time) via the rand parameter.

containerd is a container runtime available as a daemon for Linux and Windows. A bug was found in containerd prior to versions 1.6.1, 1.5.10, and 1.14.12 where containers launched through containerd’s CRI implementation on Linux with a specially-crafted image configuration could gain access to read-only copies of arbitrary files and directories on the host. This may bypass any policy-based enforcement on container setup (including a Kubernetes Pod Security Policy) and expose potentially sensitive information. Kubernetes and crictl can both be configured to use containerd’s CRI implementation. This bug has been fixed in containerd 1.6.1, 1.5.10, and 1.4.12. Users should update to these versions to resolve the issue.

InterVations NaviCOPA Web Server 3.0.1.2 and earlier allows remote attackers to obtain the source code for a web page via a trailing encoded space character in a URI, as demonstrated by /index.html%20 and /index.php%20 URIs.

An information disclosure vulnerability in ISPmanager v6.98.0 allows attackers to access sensitive details of the root user's session via an arbitrary command (ISP6-1779).

IBM Robotic Process Automation with Automation Anywhere 11 could disclose sensitive information in a web request that could aid in future attacks against the system. IBM X-Force ID: 151714.