In the Linux kernel, the following vulnerability has been resolved: nfc: rawsock: cancel tx_work before socket teardown In rawsock_release(), cancel any pending tx_work and purge the write queue before orphaning the socket. rawsock_tx_work runs on the system workqueue and calls nfc_data_exchange which dereferences the NCI device. Without synchronization, tx_work can race with socket and device teardown when a process is killed (e.g. by SIGKILL), leading to use-after-free or leaked references. Set SEND_SHUTDOWN first so that if tx_work is already running it will see the flag and skip transmitting, then use cancel_work_sync to wait for any in-progress execution to finish, and finally purge any remaining queued skbs.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/nvm: Fix double-free on aux add failure After a successful auxiliary_device_init(), aux_dev->dev.release (xe_nvm_release_dev()) is responsible for the kfree(nvm). When there is failure with auxiliary_device_add(), driver will call auxiliary_device_uninit(), which call put_device(). So that the .release callback will be triggered to free the memory associated with the auxiliary_device. Move the kfree(nvm) into the auxiliary_device_init() failure path and remove the err goto path to fix below error. " [ 13.232905] ================================================================== [ 13.232911] BUG: KASAN: double-free in xe_nvm_init+0x751/0xf10 [xe] [ 13.233112] Free of addr ffff888120635000 by task systemd-udevd/273 [ 13.233120] CPU: 8 UID: 0 PID: 273 Comm: systemd-udevd Not tainted 6.19.0-rc2-lgci-xe-kernel+ #225 PREEMPT(voluntary) ... [ 13.233125] Call Trace: [ 13.233126] <TASK> [ 13.233127] dump_stack_lvl+0x7f/0xc0 [ 13.233132] print_report+0xce/0x610 [ 13.233136] ? kasan_complete_mode_report_info+0x5d/0x1e0 [ 13.233139] ? xe_nvm_init+0x751/0xf10 [xe] ... " v2: drop err goto path. (Alexander) (cherry picked from commit a3187c0c2bbd947ffff97f90d077ac88f9c2a215)

In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: <TASK> ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... </TASK> Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling.

In the Linux kernel, the following vulnerability has been resolved: KVM: Don't clobber irqfd routing type when deassigning irqfd When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86 and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to handle a concurrent routing update, verify that the irqfd is still active before consuming the routing information. As evidenced by the x86 and arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below), clobbering the entry type without notifying arch code is surprising and error prone. As a bonus, checking that the irqfd is active provides a convenient location for documenting _why_ KVM must not consume the routing entry for an irqfd that is in the process of being deassigned: once the irqfd is deleted from the list (which happens *before* the eventfd is detached), it will no longer receive updates via kvm_irq_routing_update(), and so KVM could deliver an event using stale routing information (relative to KVM_SET_GSI_ROUTING returning to userspace). As an even better bonus, explicitly checking for the irqfd being active fixes a similar bug to the one the clobbering is trying to prevent: if an irqfd is deactivated, and then its routing is changed, kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing() (because the irqfd isn't in the list). And so if the irqfd is in bypass mode, IRQs will continue to be posted using the old routing information. As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type results in KVM incorrectly keeping the IRQ in bypass mode, which is especially problematic on AMD as KVM tracks IRQs that are being posted to a vCPU in a list whose lifetime is tied to the irqfd. Without the help of KASAN to detect use-after-free, the most common sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to the memory for irqfd structure being re-allocated and zeroed, resulting in irqfd->irq_bypass_data being NULL when read by avic_update_iommu_vcpu_affinity(): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:amd_iommu_update_ga+0x19/0xe0 Call Trace: <TASK> avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd] __avic_vcpu_load+0xf4/0x130 [kvm_amd] kvm_arch_vcpu_load+0x89/0x210 [kvm] vcpu_load+0x30/0x40 [kvm] kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm] kvm_vcpu_ioctl+0x571/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x6f/0x9d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46893b </TASK> ---[ end trace 0000000000000000 ]--- If AVIC is inhibited when the irfd is deassigned, the bug will manifest as list corruption, e.g. on the next irqfd assignment. list_add corruption. next->prev should be prev (ffff8d474d5cd588), but was 0000000000000000. (next=ffff8d8658f86530). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! Oops: invalid opcode: 0000 [#1] SMP CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:__list_add_valid_or_report+0x97/0xc0 Call Trace: <TASK> avic_pi_update_irte+0x28e/0x2b0 [kvm_amd] kvm_pi_update_irte+0xbf/0x190 [kvm] kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm] irq_bypass_register_consumer+0xcd/0x170 [irqbypa ---truncated---

In the Linux kernel, the following vulnerability has been resolved: perf: Fix __perf_event_overflow() vs perf_remove_from_context() race Make sure that __perf_event_overflow() runs with IRQs disabled for all possible callchains. Specifically the software events can end up running it with only preemption disabled. This opens up a race vs perf_event_exit_event() and friends that will go and free various things the overflow path expects to be present, like the BPF program.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: Fix interrupt storm after receiving bad if_id in IRQ handler Commit 31a7a0bbeb00 ("dpaa2-switch: add bounds check for if_id in IRQ handler") introduces a range check for if_id to avoid an out-of-bounds access. If an out-of-bounds if_id is detected, the interrupt status is not cleared. This may result in an interrupt storm. Clear the interrupt status after detecting an out-of-bounds if_id to avoid the problem. Found by an experimental AI code review agent at Google.

In the Linux kernel, the following vulnerability has been resolved: sched/mmcid: Don't assume CID is CPU owned on mode switch Shinichiro reported a KASAN UAF, which is actually an out of bounds access in the MMCID management code. CPU0 CPU1 T1 runs in userspace T0: fork(T4) -> Switch to per CPU CID mode fixup() set MM_CID_TRANSIT on T1/CPU1 T4 exit() T3 exit() T2 exit() T1 exit() switch to per task mode ---> Out of bounds access. As T1 has not scheduled after T0 set the TRANSIT bit, it exits with the TRANSIT bit set. sched_mm_cid_remove_user() clears the TRANSIT bit in the task and drops the CID, but it does not touch the per CPU storage. That's functionally correct because a CID is only owned by the CPU when the ONCPU bit is set, which is mutually exclusive with the TRANSIT flag. Now sched_mm_cid_exit() assumes that the CID is CPU owned because the prior mode was per CPU. It invokes mm_drop_cid_on_cpu() which clears the not set ONCPU bit and then invokes clear_bit() with an insanely large bit number because TRANSIT is set (bit 29). Prevent that by actually validating that the CID is CPU owned in mm_drop_cid_on_cpu().

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count() In iscsit_dec_conn_usage_count(), the function calls complete() while holding the conn->conn_usage_lock. As soon as complete() is invoked, the waiter (such as iscsit_close_connection()) may wake up and proceed to free the iscsit_conn structure. If the waiter frees the memory before the current thread reaches spin_unlock_bh(), it results in a KASAN slab-use-after-free as the function attempts to release a lock within the already-freed connection structure. Fix this by releasing the spinlock before calling complete().

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Prevent ubuf size overflow The ubuf size calculation may overflow, resulting in an undersized allocation and possible memory corruption. Use check_add_overflow() helpers to validate the size calculation before allocation.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: fix use-after-free in ctnetlink_dump_exp_ct() ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the conntrack reference immediately after netlink_dump_start(). When the dump spans multiple rounds, the second recvmsg() triggers the dump callback which dereferences the now-freed conntrack via nfct_help(ct), leading to a use-after-free on ct->ext. The bug is that the netlink_dump_control has no .start or .done callbacks to manage the conntrack reference across dump rounds. Other dump functions in the same file (e.g. ctnetlink_get_conntrack) properly use .start/.done callbacks for this purpose. Fix this by adding .start and .done callbacks that hold and release the conntrack reference for the duration of the dump, and move the nfct_help() call after the cb->args[0] early-return check in the dump callback to avoid dereferencing ct->ext unnecessarily. BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0 Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133 CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY Call Trace: <TASK> ctnetlink_exp_ct_dump_table+0x4f/0x2e0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 ? aa_sk_perm+0x184/0x450 sock_recvmsg+0xde/0xf0 Allocated by task 133: kmem_cache_alloc_noprof+0x134/0x440 __nf_conntrack_alloc+0xa8/0x2b0 ctnetlink_create_conntrack+0xa1/0x900 ctnetlink_new_conntrack+0x3cf/0x7d0 nfnetlink_rcv_msg+0x48e/0x510 netlink_rcv_skb+0xc9/0x1f0 nfnetlink_rcv+0xdb/0x220 netlink_unicast+0x3ec/0x590 netlink_sendmsg+0x397/0x690 __sys_sendmsg+0xf4/0x180 Freed by task 0: slab_free_after_rcu_debug+0xad/0x1e0 rcu_core+0x5c3/0x9c0

In the Linux kernel, the following vulnerability has been resolved: espintcp: Fix race condition in espintcp_close() This issue was discovered during a code audit. After cancel_work_sync() is called from espintcp_close(), espintcp_tx_work() can still be scheduled from paths such as the Delayed ACK handler or ksoftirqd. As a result, the espintcp_tx_work() worker may dereference a freed espintcp ctx or sk. The following is a simple race scenario: cpu0 cpu1 espintcp_close() cancel_work_sync(&ctx->work); espintcp_write_space() schedule_work(&ctx->work); To prevent this race condition, cancel_work_sync() is replaced with disable_work_sync().

In the Linux kernel, the following vulnerability has been resolved: nfsd: provide locking for v4_end_grace Writing to v4_end_grace can race with server shutdown and result in memory being accessed after it was freed - reclaim_str_hashtbl in particularly. We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is held while client_tracking_op->init() is called and that can wait for an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a deadlock. nfsd4_end_grace() is also called by the landromat work queue and this doesn't require locking as server shutdown will stop the work and wait for it before freeing anything that nfsd4_end_grace() might access. However, we must be sure that writing to v4_end_grace doesn't restart the work item after shutdown has already waited for it. For this we add a new flag protected with nn->client_lock. It is set only while it is safe to make client tracking calls, and v4_end_grace only schedules work while the flag is set with the spinlock held. So this patch adds a nfsd_net field "client_tracking_active" which is set as described. Another field "grace_end_forced", is set when v4_end_grace is written. After this is set, and providing client_tracking_active is set, the laundromat is scheduled. This "grace_end_forced" field bypasses other checks for whether the grace period has finished. This resolves a race which can result in use-after-free.

In the Linux kernel, the following vulnerability has been resolved: clsact: Fix use-after-free in init/destroy rollback asymmetry Fix a use-after-free in the clsact qdisc upon init/destroy rollback asymmetry. The latter is achieved by first fully initializing a clsact instance, and then in a second step having a replacement failure for the new clsact qdisc instance. clsact_init() initializes ingress first and then takes care of the egress part. This can fail midway, for example, via tcf_block_get_ext(). Upon failure, the kernel will trigger the clsact_destroy() callback. Commit 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry") details the way how the transition is happening. If tcf_block_get_ext on the q->ingress_block ends up failing, we took the tcx_miniq_inc reference count on the ingress side, but not yet on the egress side. clsact_destroy() tests whether the {ingress,egress}_entry was non-NULL. However, even in midway failure on the replacement, both are in fact non-NULL with a valid egress_entry from the previous clsact instance. What we really need to test for is whether the qdisc instance-specific ingress or egress side previously got initialized. This adds a small helper for checking the miniq initialization called mini_qdisc_pair_inited, and utilizes that upon clsact_destroy() in order to fix the use-after-free scenario. Convert the ingress_destroy() side as well so both are consistent to each other.

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing struct bpf_plt contains a u64 target field. Currently, the BPF JIT allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT buffer. Because the base address of the JIT buffer can be 4-byte aligned (e.g., ending in 0x4 or 0xc), the relative padding logic in build_plt() fails to ensure that target lands on an 8-byte boundary. This leads to two issues: 1. UBSAN reports misaligned-access warnings when dereferencing the structure. 2. More critically, target is updated concurrently via WRITE_ONCE() in bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64, 64-bit loads/stores are only guaranteed to be single-copy atomic if they are 64-bit aligned. A misaligned target risks a torn read, causing the JIT to jump to a corrupted address. Fix this by increasing the allocation alignment requirement to 8 bytes (sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of the JIT buffer to an 8-byte boundary, allowing the relative padding math in build_plt() to correctly align the target field.

In the Linux kernel, the following vulnerability has been resolved: linkwatch: use __dev_put() in callers to prevent UAF After linkwatch_do_dev() calls __dev_put() to release the linkwatch reference, the device refcount may drop to 1. At this point, netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an empty list and returns without blocking), wait for the refcount to become 1 via netdev_wait_allrefs_any(), and then free the device via kobject_put(). This creates a use-after-free when __linkwatch_run_queue() tries to call netdev_unlock_ops() on the already-freed device. Note that adding netdev_lock_ops()/netdev_unlock_ops() pair in netdev_run_todo() before kobject_put() would not work, because netdev_lock_ops() is conditional - it only locks when netdev_need_ops_lock() returns true. If the device doesn't require ops_lock, linkwatch won't hold any lock, and netdev_run_todo() acquiring the lock won't provide synchronization. Fix this by moving __dev_put() from linkwatch_do_dev() to its callers. The device reference logically pairs with de-listing the device, so it's reasonable for the caller that did the de-listing to release it. This allows placing __dev_put() after all device accesses are complete, preventing UAF. The bug can be reproduced by adding mdelay(2000) after linkwatch_do_dev() in __linkwatch_run_queue(), then running: ip tuntap add mode tun name tun_test ip link set tun_test up ip link set tun_test carrier off ip link set tun_test carrier on sleep 0.5 ip tuntap del mode tun name tun_test KASAN report: ================================================================== BUG: KASAN: use-after-free in netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] BUG: KASAN: use-after-free in netdev_unlock_ops include/net/netdev_lock.h:47 [inline] BUG: KASAN: use-after-free in __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 Read of size 8 at addr ffff88804de5c008 by task kworker/u32:10/8123 CPU: 0 UID: 0 PID: 8123 Comm: kworker/u32:10 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events_unbound linkwatch_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x156/0x4c9 mm/kasan/report.c:482 kasan_report+0xdf/0x1a0 mm/kasan/report.c:595 netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] netdev_unlock_ops include/net/netdev_lock.h:47 [inline] __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:304 process_one_work+0x9c2/0x1840 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x5da/0xe40 kernel/workqueue.c:3421 kthread+0x3b3/0x730 kernel/kthread.c:463 ret_from_fork+0x754/0xaf0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> ==================================================================

In the Linux kernel, the following vulnerability has been resolved: ublk: fix use-after-free in ublk_partition_scan_work A race condition exists between the async partition scan work and device teardown that can lead to a use-after-free of ub->ub_disk: 1. ublk_ctrl_start_dev() schedules partition_scan_work after add_disk() 2. ublk_stop_dev() calls ublk_stop_dev_unlocked() which does: - del_gendisk(ub->ub_disk) - ublk_detach_disk() sets ub->ub_disk = NULL - put_disk() which may free the disk 3. The worker ublk_partition_scan_work() then dereferences ub->ub_disk leading to UAF Fix this by using ublk_get_disk()/ublk_put_disk() in the worker to hold a reference to the disk during the partition scan. The spinlock in ublk_get_disk() synchronizes with ublk_detach_disk() ensuring the worker either gets a valid reference or sees NULL and exits early. Also change flush_work() to cancel_work_sync() to avoid running the partition scan work unnecessarily when the disk is already detached.

In the Linux kernel, the following vulnerability has been resolved: rust_binder: correctly handle FDA objects of length zero Fix a bug where an empty FDA (fd array) object with 0 fds would cause an out-of-bounds error. The previous implementation used `skip == 0` to mean "this is a pointer fixup", but 0 is also the correct skip length for an empty FDA. If the FDA is at the end of the buffer, then this results in an attempt to write 8-bytes out of bounds. This is caught and results in an EINVAL error being returned to userspace. The pattern of using `skip == 0` as a special value originates from the C-implementation of Binder. As part of fixing this bug, this pattern is replaced with a Rust enum. I considered the alternate option of not pushing a fixup when the length is zero, but I think it's cleaner to just get rid of the zero-is-special stuff. The root cause of this bug was diagnosed by Gemini CLI on first try. I used the following prompt: > There appears to be a bug in @drivers/android/binder/thread.rs where > the Fixups oob bug is triggered with 316 304 316 324. This implies > that we somehow ended up with a fixup where buffer A has a pointer to > buffer B, but the pointer is located at an index in buffer A that is > out of bounds. Please investigate the code to find the bug. You may > compare with @drivers/android/binder.c that implements this correctly.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/queue: Call fini on exec queue creation fail Every call to queue init should have a corresponding fini call. Skipping this would mean skipping removal of the queue from GuC list (which is part of guc_id allocation). A damaged queue stored in exec_queue_lookup list would lead to invalid memory reference, sooner or later. Call fini to free guc_id. This must be done before any internal LRCs are freed. Since the finalization with this extra call became very similar to __xe_exec_queue_fini(), reuse that. To make this reuse possible, alter xe_lrc_put() so it can survive NULL parameters, like other similar functions. v2: Reuse _xe_exec_queue_fini(). Make xe_lrc_put() aware of NULLs. (cherry picked from commit 393e5fea6f7d7054abc2c3d97a4cfe8306cd6079)

In the Linux kernel, the following vulnerability has been resolved: crypto: omap - Allocate OMAP_CRYPTO_FORCE_COPY scatterlists correctly The existing allocation of scatterlists in omap_crypto_copy_sg_lists() was allocating an array of scatterlist pointers, not scatterlist objects, resulting in a 4x too small allocation. Use sizeof(*new_sg) to get the correct object size.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race between freeing data and fs accessing it AppArmor was putting the reference to i_private data on its end after removing the original entry from the file system. However the inode can aand does live beyond that point and it is possible that some of the fs call back functions will be invoked after the reference has been put, which results in a race between freeing the data and accessing it through the fs. While the rawdata/loaddata is the most likely candidate to fail the race, as it has the fewest references. If properly crafted it might be possible to trigger a race for the other types stored in i_private. Fix this by moving the put of i_private referenced data to the correct place which is during inode eviction.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix refcount bug and potential UAF in perf_mmap Syzkaller reported a refcount_t: addition on 0; use-after-free warning in perf_mmap. The issue is caused by a race condition between a failing mmap() setup and a concurrent mmap() on a dependent event (e.g., using output redirection). In perf_mmap(), the ring_buffer (rb) is allocated and assigned to event->rb with the mmap_mutex held. The mutex is then released to perform map_range(). If map_range() fails, perf_mmap_close() is called to clean up. However, since the mutex was dropped, another thread attaching to this event (via inherited events or output redirection) can acquire the mutex, observe the valid event->rb pointer, and attempt to increment its reference count. If the cleanup path has already dropped the reference count to zero, this results in a use-after-free or refcount saturation warning. Fix this by extending the scope of mmap_mutex to cover the map_range() call. This ensures that the ring buffer initialization and mapping (or cleanup on failure) happens atomically effectively, preventing other threads from accessing a half-initialized or dying ring buffer.

In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X interrupt to the host using a writel(), which generates a PCI posted write transaction. There's no completion for posted writes, so the writel() may return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also unmaps the outbound ATU entry used for the PCI write, so the write races with the unmap. If the PCI write loses the race with the ATU unmap, the write may corrupt host memory or cause IOMMU errors, e.g., these when running fio with a larger queue depth against nvmet-pci-epf: arm-smmu-v3 fc900000.iommu: 0x0000010000000010 arm-smmu-v3 fc900000.iommu: 0x0000020000000000 arm-smmu-v3 fc900000.iommu: 0x000000090000f040 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0 arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0 Flush the write by performing a readl() of the same address to ensure that the write has reached the destination before the ATU entry is unmapped. The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit 8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there it was solved by dedicating an outbound iATU only for MSI. We can't do the same for MSI-X because each vector can have a different msg_addr and the msg_addr may be changed while the vector is masked. [bhelgaas: commit log]

In the Linux kernel, the following vulnerability has been resolved: net: shaper: protect late read accesses to the hierarchy We look up a netdev during prep of Netlink ops (pre- callbacks) and take a ref to it. Then later in the body of the callback we take its lock or RCU which are the actual protections. This is not proper, a conversion from a ref to a locked netdev must include a liveness check (a check if the netdev hasn't been unregistered already). Fix the read cases (those under RCU). Writes needs a separate change to protect from creating the hierarchy after flush has already run.

In the Linux kernel, the following vulnerability has been resolved: tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow The dma_map_sg tracepoint can trigger a perf buffer overflow when tracing large scatter-gather lists. With devices like virtio-gpu creating large DRM buffers, nents can exceed 1000 entries, resulting in: phys_addrs: 1000 * 8 bytes = 8,000 bytes dma_addrs: 1000 * 8 bytes = 8,000 bytes lengths: 1000 * 4 bytes = 4,000 bytes Total: ~20,000 bytes This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing: WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405 perf buffer not large enough, wanted 24620, have 8192 Cap all three dynamic arrays at 128 entries using min() in the array size calculation. This ensures arrays are only as large as needed (up to the cap), avoiding unnecessary memory allocation for small operations while preventing overflow for large ones. The tracepoint now records the full nents/ents counts and a truncated flag so users can see when data has been capped. Changes in v2: - Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from Steven Rostedt) - This allocates only what's needed up to the cap, avoiding waste for small operations Reviwed-by: Sean Anderson <sean.anderson@linux.dev>

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix double free of ns_name in aa_replace_profiles() if ns_name is NULL after 1071 error = aa_unpack(udata, &lh, &ns_name); and if ent->ns_name contains an ns_name in 1089 } else if (ent->ns_name) { then ns_name is assigned the ent->ns_name 1095 ns_name = ent->ns_name; however ent->ns_name is freed at 1262 aa_load_ent_free(ent); and then again when freeing ns_name at 1270 kfree(ns_name); Fix this by NULLing out ent->ns_name after it is transferred to ns_name ")

In the Linux kernel, the following vulnerability has been resolved: hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver The recently added macsmc-hwmon driver contained several critical bugs in its sensor population logic and float conversion routines. Specifically: - The voltage sensor population loop used the wrong prefix ("volt-" instead of "voltage-") and incorrectly assigned sensors to the temperature sensor array (hwmon->temp.sensors) instead of the voltage sensor array (hwmon->volt.sensors). This would lead to out-of-bounds memory access or data corruption when both temperature and voltage sensors were present. - The float conversion in macsmc_hwmon_write_f32() had flawed exponent logic for values >= 2^24 and lacked masking for the mantissa, which could lead to incorrect values being written to the SMC. Fix these issues to ensure correct sensor registration and reliable manual fan control. Confirm that the reported overflow in FIELD_PREP is fixed by declaring macsmc_hwmon_write_f32() as __always_inline for a compile test.

In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix use-after-free and list corruption on sender error The analysis from Breno: When the SMI sender returns an error, smi_work() delivers an error response but then jumps back to restart without cleaning up properly: 1. intf->curr_msg is not cleared, so no new message is pulled 2. newmsg still points to the message, causing sender() to be called again with the same message 3. If sender() fails again, deliver_err_response() is called with the same recv_msg that was already queued for delivery This causes list_add corruption ("list_add double add") because the recv_msg is added to the user_msgs list twice. Subsequently, the corrupted list leads to use-after-free when the memory is freed and reused, and eventually a NULL pointer dereference when accessing recv_msg->done. The buggy sequence: sender() fails -> deliver_err_response(recv_msg) // recv_msg queued for delivery -> goto restart // curr_msg not cleared! sender() fails again (same message!) -> deliver_err_response(recv_msg) // tries to queue same recv_msg -> LIST CORRUPTION Fix this by freeing the message and setting it to NULL on a send error. Also, always free the newmsg on a send error, otherwise it will leak.

In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix UAF in configfs release path The gpio-virtuser configfs release path uses guard(mutex) to protect the device structure. However, the device is freed before the guard cleanup runs, causing mutex_unlock() to operate on freed memory. Specifically, gpio_virtuser_device_config_group_release() destroys the mutex and frees the device while still inside the guard(mutex) scope. When the function returns, the guard cleanup invokes mutex_unlock(&dev->lock), resulting in a slab use-after-free. Limit the mutex lifetime by using a scoped_guard() only around the activation check, so that the lock is released before mutex_destroy() and kfree() are called.

In the Linux kernel through 3.2, the rds_message_alloc_sgs() function does not validate a value that is used during DMA page allocation, leading to a heap-based out-of-bounds write (related to the rds_rdma_extra_size function in net/rds/rdma.c).

In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Fix buffer overflow in config retrieval The scarlett2_usb_get_config() function has a logic error in the endianness conversion code that can cause buffer overflows when count > 1. The code checks `if (size == 2)` where `size` is the total buffer size in bytes, then loops `count` times treating each element as u16 (2 bytes). This causes the loop to access `count * 2` bytes when the buffer only has `size` bytes allocated. Fix by checking the element size (config_item->size) instead of the total buffer size. This ensures the endianness conversion matches the actual element type.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Open-code GGTT MMIO access protection GGTT MMIO access is currently protected by hotplug (drm_dev_enter), which works correctly when the driver loads successfully and is later unbound or unloaded. However, if driver load fails, this protection is insufficient because drm_dev_unplug() is never called. Additionally, devm release functions cannot guarantee that all BOs with GGTT mappings are destroyed before the GGTT MMIO region is removed, as some BOs may be freed asynchronously by worker threads. To address this, introduce an open-coded flag, protected by the GGTT lock, that guards GGTT MMIO access. The flag is cleared during the dev_fini_ggtt devm release function to ensure MMIO access is disabled once teardown begins. (cherry picked from commit 4f3a998a173b4325c2efd90bdadc6ccd3ad9a431)

In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds check The same bounds-check bug fixed for NDP16 in the previous patch also exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated against the total skb length without accounting for ndpoffset, allowing out-of-bounds reads when the NDP32 is placed near the end of the NTB. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly. Compile-tested only.

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_CT: drop pending enqueued packets on template removal Templates refer to objects that can go away while packets are sitting in nfqueue refer to: - helper, this can be an issue on module removal. - timeout policy, nfnetlink_cttimeout might remove it. The use of templates with zone and event cache filter are safe, since this just copies values. Flush these enqueued packets in case the template rule gets removed.

In the Linux kernel, the following vulnerability has been resolved: netfilter: bpf: defer hook memory release until rcu readers are done Yiming Qian reports UaF when concurrent process is dumping hooks via nfnetlink_hooks: BUG: KASAN: slab-use-after-free in nfnl_hook_dump_one.isra.0+0xe71/0x10f0 Read of size 8 at addr ffff888003edbf88 by task poc/79 Call Trace: <TASK> nfnl_hook_dump_one.isra.0+0xe71/0x10f0 netlink_dump+0x554/0x12b0 nfnl_hook_get+0x176/0x230 [..] Defer release until after concurrent readers have completed.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: do not free existing class in qfq_change_class() Fixes qfq_change_class() error case. cl->qdisc and cl should only be freed if a new class and qdisc were allocated, or we risk various UAF.

In the Linux kernel, the following vulnerability has been resolved: igc: fix page fault in XDP TX timestamps handling If an XDP application that requested TX timestamping is shutting down while the link of the interface in use is still up the following kernel splat is reported: [ 883.803618] [ T1554] BUG: unable to handle page fault for address: ffffcfb6200fd008 ... [ 883.803650] [ T1554] Call Trace: [ 883.803652] [ T1554] <TASK> [ 883.803654] [ T1554] igc_ptp_tx_tstamp_event+0xdf/0x160 [igc] [ 883.803660] [ T1554] igc_tsync_interrupt+0x2d5/0x300 [igc] ... During shutdown of the TX ring the xsk_meta pointers are left behind, so that the IRQ handler is trying to touch them. This issue is now being fixed by cleaning up the stale xsk meta data on TX shutdown. TX timestamps on other queues remain unaffected.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure ieee80211_tx_prepare_skb() has three error paths, but only two of them free the skb. The first error path (ieee80211_tx_prepare() returning TX_DROP) does not free it, while invoke_tx_handlers() failure and the fragmentation check both do. Add kfree_skb() to the first error path so all three are consistent, and remove the now-redundant frees in callers (ath9k, mt76, mac80211_hwsim) to avoid double-free. Document the skb ownership guarantee in the function's kdoc.

In the Linux kernel, the following vulnerability has been resolved: iommu/sva: Fix crash in iommu_sva_unbind_device() domain->mm->iommu_mm can be freed by iommu_domain_free(): iommu_domain_free() mmdrop() __mmdrop() mm_pasid_drop() After iommu_domain_free() returns, accessing domain->mm->iommu_mm may dereference a freed mm structure, leading to a crash. Fix this by moving the code that accesses domain->mm->iommu_mm to before the call to iommu_domain_free().

In the Linux kernel, the following vulnerability has been resolved: net/sched: Enforce that teql can only be used as root qdisc Design intent of teql is that it is only supposed to be used as root qdisc. We need to check for that constraint. Although not important, I will describe the scenario that unearthed this issue for the curious. GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows: ROOT qdisc 1:0 (QFQ) ├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s └── class 1:2 (weight=1, lmax=1514) teql GangMin sends a packet which is enqueued to 1:1 (netem). Any invocation of dequeue by QFQ from this class will not return a packet until after 6.4s. In the meantime, a second packet is sent and it lands on 1:2. teql's enqueue will return success and this will activate class 1:2. Main issue is that teql only updates the parent visible qlen (sch->q.qlen) at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's peek always returns NULL), dequeue will never be called and thus the qlen will remain as 0. With that in mind, when GangMin updates 1:2's lmax value, the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's qlen was not incremented, qfq fails to deactivate the class, but still frees its pointers from the aggregate. So when the first packet is rescheduled after 6.4 seconds (netem's delay), a dangling pointer is accessed causing GangMin's causing a UAF.

In the Linux kernel, the following vulnerability has been resolved: bridge: cfm: Fix race condition in peer_mep deletion When a peer MEP is being deleted, cancel_delayed_work_sync() is called on ccm_rx_dwork before freeing. However, br_cfm_frame_rx() runs in softirq context under rcu_read_lock (without RTNL) and can re-schedule ccm_rx_dwork via ccm_rx_timer_start() between cancel_delayed_work_sync() returning and kfree_rcu() being called. The following is a simple race scenario: cpu0 cpu1 mep_delete_implementation() cancel_delayed_work_sync(ccm_rx_dwork); br_cfm_frame_rx() // peer_mep still in hlist if (peer_mep->ccm_defect) ccm_rx_timer_start() queue_delayed_work(ccm_rx_dwork) hlist_del_rcu(&peer_mep->head); kfree_rcu(peer_mep, rcu); ccm_rx_work_expired() // on freed peer_mep To prevent this, cancel_delayed_work_sync() is replaced with disable_delayed_work_sync() in both peer MEP deletion paths, so that subsequent queue_delayed_work() calls from br_cfm_frame_rx() are silently rejected. The cc_peer_disable() helper retains cancel_delayed_work_sync() because it is also used for the CC enable/disable toggle path where the work must remain re-schedulable.

In the Linux kernel, the following vulnerability has been resolved: macvlan: fix possible UAF in macvlan_forward_source() Add RCU protection on (struct macvlan_source_entry)->vlan. Whenever macvlan_hash_del_source() is called, we must clear entry->vlan pointer before RCU grace period starts. This allows macvlan_forward_source() to skip over entries queued for freeing. Note that macvlan_dev are already RCU protected, as they are embedded in a standard netdev (netdev_priv(ndev)). https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack-out-of-bounds write in devmap get_upper_ifindexes() iterates over all upper devices and writes their indices into an array without checking bounds. Also the callers assume that the max number of upper devices is MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack, but that assumption is not correct and the number of upper devices could be larger than MAX_NEST_DEV (e.g., many macvlans), causing a stack-out-of-bounds write. Add a max parameter to get_upper_ifindexes() to avoid the issue. When there are too many upper devices, return -EOVERFLOW and abort the redirect. To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS. Then send a packet to the device to trigger the XDP redirect path.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-sprd-adi: Fix double free in probe error path The driver currently uses spi_alloc_host() to allocate the controller but registers it using devm_spi_register_controller(). If devm_register_restart_handler() fails, the code jumps to the put_ctlr label and calls spi_controller_put(). However, since the controller was registered via a devm function, the device core will automatically call spi_controller_put() again when the probe fails. This results in a double-free of the spi_controller structure. Fix this by switching to devm_spi_alloc_host() and removing the manual spi_controller_put() call.

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix fragment node deletion to prevent buffer leak After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"), the list_node field is reused for both the xskb pool list and the buffer free list, this causes a buffer leak as described below. xp_free() checks if a buffer is already on the free list using list_empty(&xskb->list_node). When list_del() is used to remove a node from the xskb pool list, it doesn't reinitialize the node pointers. This means list_empty() will return false even after the node has been removed, causing xp_free() to incorrectly skip adding the buffer to the free list. Fix this by using list_del_init() instead of list_del() in all fragment handling paths, this ensures the list node is reinitialized after removal, allowing the list_empty() to work correctly.

In the Linux kernel, the following vulnerability has been resolved: net/sched: teql: Fix double-free in teql_master_xmit Whenever a TEQL devices has a lockless Qdisc as root, qdisc_reset should be called using the seq_lock to avoid racing with the datapath. Failure to do so may cause crashes like the following: [ 238.028993][ T318] BUG: KASAN: double-free in skb_release_data (net/core/skbuff.c:1139) [ 238.029328][ T318] Free of addr ffff88810c67ec00 by task poc_teql_uaf_ke/318 [ 238.029749][ T318] [ 238.029900][ T318] CPU: 3 UID: 0 PID: 318 Comm: poc_teql_ke Not tainted 7.0.0-rc3-00149-ge5b31d988a41 #704 PREEMPT(full) [ 238.029906][ T318] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 238.029910][ T318] Call Trace: [ 238.029913][ T318] <TASK> [ 238.029916][ T318] dump_stack_lvl (lib/dump_stack.c:122) [ 238.029928][ T318] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 238.029940][ T318] ? skb_release_data (net/core/skbuff.c:1139) [ 238.029944][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) ... [ 238.029957][ T318] ? skb_release_data (net/core/skbuff.c:1139) [ 238.029969][ T318] kasan_report_invalid_free (mm/kasan/report.c:221 mm/kasan/report.c:563) [ 238.029979][ T318] ? skb_release_data (net/core/skbuff.c:1139) [ 238.029989][ T318] check_slab_allocation (mm/kasan/common.c:231) [ 238.029995][ T318] kmem_cache_free (mm/slub.c:2637 (discriminator 1) mm/slub.c:6168 (discriminator 1) mm/slub.c:6298 (discriminator 1)) [ 238.030004][ T318] skb_release_data (net/core/skbuff.c:1139) ... [ 238.030025][ T318] sk_skb_reason_drop (net/core/skbuff.c:1256) [ 238.030032][ T318] pfifo_fast_reset (./include/linux/ptr_ring.h:171 ./include/linux/ptr_ring.h:309 ./include/linux/skb_array.h:98 net/sched/sch_generic.c:827) [ 238.030039][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) ... [ 238.030054][ T318] qdisc_reset (net/sched/sch_generic.c:1034) [ 238.030062][ T318] teql_destroy (./include/linux/spinlock.h:395 net/sched/sch_teql.c:157) [ 238.030071][ T318] __qdisc_destroy (./include/net/pkt_sched.h:328 net/sched/sch_generic.c:1077) [ 238.030077][ T318] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 238.030089][ T318] ? __pfx_qdisc_graft (net/sched/sch_api.c:1091) [ 238.030095][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 238.030102][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 238.030106][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 238.030114][ T318] tc_get_qdisc (net/sched/sch_api.c:1529 net/sched/sch_api.c:1556) ... [ 238.072958][ T318] Allocated by task 303 on cpu 5 at 238.026275s: [ 238.073392][ T318] kasan_save_stack (mm/kasan/common.c:58) [ 238.073884][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5)) [ 238.074230][ T318] __kasan_slab_alloc (mm/kasan/common.c:369) [ 238.074578][ T318] kmem_cache_alloc_node_noprof (./include/linux/kasan.h:253 mm/slub.c:4542 mm/slub.c:4869 mm/slub.c:4921) [ 238.076091][ T318] kmalloc_reserve (net/core/skbuff.c:616 (discriminator 107)) [ 238.076450][ T318] __alloc_skb (net/core/skbuff.c:713) [ 238.076834][ T318] alloc_skb_with_frags (./include/linux/skbuff.h:1383 net/core/skbuff.c:6763) [ 238.077178][ T318] sock_alloc_send_pskb (net/core/sock.c:2997) [ 238.077520][ T318] packet_sendmsg (net/packet/af_packet.c:2926 net/packet/af_packet.c:3019 net/packet/af_packet.c:3108) [ 238.081469][ T318] [ 238.081870][ T318] Freed by task 299 on cpu 1 at 238.028496s: [ 238.082761][ T318] kasan_save_stack (mm/kasan/common.c:58) [ 238.083481][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5)) [ 238.085348][ T318] kasan_save_free_info (mm/kasan/generic.c:587 (discriminator 1)) [ 238.085900][ T318] __kasan_slab_free (mm/ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: clk: microchip: fix potential UAF in auxdev release callback Similar to commit 1c11289b34ab ("peci: cpu: Fix use-after-free in adev_release()"), the auxiliary device is not torn down in the correct order. If auxiliary_device_add() fails, the release callback will be called twice, resulting in a UAF. Due to timing, the auxdev code in this driver "took inspiration" from the aforementioned commit, and thus its bugs too! Moving auxiliary_device_uninit() to the unregister callback instead avoids the issue.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Collect command failures data only for known commands DEVX can issue a general command, which is not used by mlx5 driver. In case such command is failed, mlx5 is trying to collect the failure data, However, mlx5 doesn't create a storage for this command, since mlx5 doesn't use it. This lead to array-index-out-of-bounds error. Fix it by checking whether the command is known before collecting the failure data.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write During the sysfs firmware write process, a use-after-free read warning is logged from the lpfc_wr_object() routine: BUG: KFENCE: use-after-free read in lpfc_wr_object+0x235/0x310 [lpfc] Use-after-free read at 0x0000000000cf164d (in kfence-#111): lpfc_wr_object+0x235/0x310 [lpfc] lpfc_write_firmware.cold+0x206/0x30d [lpfc] lpfc_sli4_request_firmware_update+0xa6/0x100 [lpfc] lpfc_request_firmware_upgrade_store+0x66/0xb0 [lpfc] kernfs_fop_write_iter+0x121/0x1b0 new_sync_write+0x11c/0x1b0 vfs_write+0x1ef/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x59/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The driver accessed wr_object pointer data, which was initialized into mailbox payload memory, after the mailbox object was released back to the mailbox pool. Fix by moving the mailbox free calls to the end of the routine ensuring that we don't reference internal mailbox memory after release.

In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix racy access at PCM trigger The PCM trigger callback of aloop driver tries to check the PCM state and stop the stream of the tied substream in the corresponding cable. Since both check and stop operations are performed outside the cable lock, this may result in UAF when a program attempts to trigger frequently while opening/closing the tied stream, as spotted by fuzzers. For addressing the UAF, this patch changes two things: - It covers the most of code in loopback_check_format() with cable->lock spinlock, and add the proper NULL checks. This avoids already some racy accesses. - In addition, now we try to check the state of the capture PCM stream that may be stopped in this function, which was the major pain point leading to UAF.

In the Linux kernel, the following vulnerability has been resolved: xdp: produce a warning when calculated tailroom is negative Many ethernet drivers report xdp Rx queue frag size as being the same as DMA write size. However, the only user of this field, namely bpf_xdp_frags_increase_tail(), clearly expects a truesize. Such difference leads to unspecific memory corruption issues under certain circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses all DMA-writable space in 2 buffers. This would be fine, if only rxq->frag_size was properly set to 4K, but value of 3K results in a negative tailroom, because there is a non-zero page offset. We are supposed to return -EINVAL and be done with it in such case, but due to tailroom being stored as an unsigned int, it is reported to be somewhere near UINT_MAX, resulting in a tail being grown, even if the requested offset is too much (it is around 2K in the abovementioned test). This later leads to all kinds of unspecific calltraces. [ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6 [ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4 [ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000] [ 7340.339230] in xskxceiver[42b5,400000+69000] [ 7340.340300] likely on CPU 6 (core 0, socket 6) [ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe [ 7340.340888] likely on CPU 3 (core 0, socket 3) [ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7 [ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI [ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy) [ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 [ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80 [ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89 [ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202 [ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010 [ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff [ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0 [ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0 [ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500 [ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000 [ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0 [ 7340.421237] PKRU: 55555554 [ 7340.421623] Call Trace: [ 7340.421987] <TASK> [ 7340.422309] ? softleaf_from_pte+0x77/0xa0 [ 7340.422855] swap_pte_batch+0xa7/0x290 [ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270 [ 7340.424102] zap_pte_range+0x281/0x580 [ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240 [ 7340.425177] unmap_page_range+0x24d/0x420 [ 7340.425714] unmap_vmas+0xa1/0x180 [ 7340.426185] exit_mmap+0xe1/0x3b0 [ 7340.426644] __mmput+0x41/0x150 [ 7340.427098] exit_mm+0xb1/0x110 [ 7340.427539] do_exit+0x1b2/0x460 [ 7340.427992] do_group_exit+0x2d/0xc0 [ 7340.428477] get_signal+0x79d/0x7e0 [ 7340.428957] arch_do_signal_or_restart+0x34/0x100 [ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0 [ 7340.430159] do_syscall_64+0x188/ ---truncated---