In the Linux kernel, the following vulnerability has been resolved: block: fix memory leak in disk_register_independent_access_ranges kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add() If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix this issue by adding kobject_put(). Callback function blk_ia_ranges_sysfs_release() in kobject_put() can handle the pointer "iars" properly.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2} Free the "struct kvm_cpuid_entry2" array on successful post-KVM_RUN KVM_SET_CPUID{,2} to fix a memory leak, the callers of kvm_set_cpuid() free the array only on failure. BUG: memory leak unreferenced object 0xffff88810963a800 (size 2048): comm "syz-executor025", pid 3610, jiffies 4294944928 (age 8.080s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 0d 00 00 00 ................ 47 65 6e 75 6e 74 65 6c 69 6e 65 49 00 00 00 00 GenuntelineI.... backtrace: [<ffffffff814948ee>] kmalloc_node include/linux/slab.h:604 [inline] [<ffffffff814948ee>] kvmalloc_node+0x3e/0x100 mm/util.c:580 [<ffffffff814950f2>] kvmalloc include/linux/slab.h:732 [inline] [<ffffffff814950f2>] vmemdup_user+0x22/0x100 mm/util.c:199 [<ffffffff8109f5ff>] kvm_vcpu_ioctl_set_cpuid2+0x8f/0xf0 arch/x86/kvm/cpuid.c:423 [<ffffffff810711b9>] kvm_arch_vcpu_ioctl+0xb99/0x1e60 arch/x86/kvm/x86.c:5251 [<ffffffff8103e92d>] kvm_vcpu_ioctl+0x4ad/0x950 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4066 [<ffffffff815afacc>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff815afacc>] __do_sys_ioctl fs/ioctl.c:874 [inline] [<ffffffff815afacc>] __se_sys_ioctl fs/ioctl.c:860 [inline] [<ffffffff815afacc>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 [<ffffffff844a3335>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff844a3335>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: usb: xhci-plat: fix crash when suspend if remote wake enable Crashed at i.mx8qm platform when suspend if enable remote wakeup Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 244 Comm: kworker/u12:6 Not tainted 5.15.5-dirty #12 Hardware name: Freescale i.MX8QM MEK (DT) Workqueue: events_unbound async_run_entry_fn pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xhci_disable_hub_port_wake.isra.62+0x60/0xf8 lr : xhci_disable_hub_port_wake.isra.62+0x34/0xf8 sp : ffff80001394bbf0 x29: ffff80001394bbf0 x28: 0000000000000000 x27: ffff00081193b578 x26: ffff00081193b570 x25: 0000000000000000 x24: 0000000000000000 x23: ffff00081193a29c x22: 0000000000020001 x21: 0000000000000001 x20: 0000000000000000 x19: ffff800014e90490 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000960 x9 : ffff80001394baa0 x8 : ffff0008145d1780 x7 : ffff0008f95b8e80 x6 : 000000001853b453 x5 : 0000000000000496 x4 : 0000000000000000 x3 : ffff00081193a29c x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff000814591620 Call trace: xhci_disable_hub_port_wake.isra.62+0x60/0xf8 xhci_suspend+0x58/0x510 xhci_plat_suspend+0x50/0x78 platform_pm_suspend+0x2c/0x78 dpm_run_callback.isra.25+0x50/0xe8 __device_suspend+0x108/0x3c0 The basic flow: 1. run time suspend call xhci_suspend, xhci parent devices gate the clock. 2. echo mem >/sys/power/state, system _device_suspend call xhci_suspend 3. xhci_suspend call xhci_disable_hub_port_wake, which access register, but clock already gated by run time suspend. This problem was hidden by power domain driver, which call run time resume before it. But the below commit remove it and make this issue happen. commit c1df456d0f06e ("PM: domains: Don't runtime resume devices at genpd_prepare()") This patch call run time resume before suspend to make sure clock is on before access register. Testeb-by: Abel Vesa <abel.vesa@nxp.com>

In the Linux kernel, the following vulnerability has been resolved: ceph: properly put ceph_string reference after async create attempt The reference acquired by try_prep_async_create is currently leaked. Ensure we put it.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix memory leak when using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput().

In the Linux kernel, the following vulnerability has been resolved: tcp: TX zerocopy should not sense pfmemalloc status We got a recent syzbot report [1] showing a possible misuse of pfmemalloc page status in TCP zerocopy paths. Indeed, for pages coming from user space or other layers, using page_is_pfmemalloc() is moot, and possibly could give false positives. There has been attempts to make page_is_pfmemalloc() more robust, but not using it in the first place in this context is probably better, removing cpu cycles. Note to stable teams : You need to backport 84ce071e38a6 ("net: introduce __skb_fill_page_desc_noacc") as a prereq. Race is more probable after commit c07aea3ef4d4 ("mm: add a signature in struct page") because page_is_pfmemalloc() is now using low order bit from page->lru.next, which can change more often than page->index. Low order bit should never be set for lru.next (when used as an anchor in LRU list), so KCSAN report is mostly a false positive. Backporting to older kernel versions seems not necessary. [1] BUG: KCSAN: data-race in lru_add_fn / tcp_build_frag write to 0xffffea0004a1d2c8 of 8 bytes by task 18600 on cpu 0: __list_add include/linux/list.h:73 [inline] list_add include/linux/list.h:88 [inline] lruvec_add_folio include/linux/mm_inline.h:105 [inline] lru_add_fn+0x440/0x520 mm/swap.c:228 folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246 folio_batch_add_and_move mm/swap.c:263 [inline] folio_add_lru+0xf1/0x140 mm/swap.c:490 filemap_add_folio+0xf8/0x150 mm/filemap.c:948 __filemap_get_folio+0x510/0x6d0 mm/filemap.c:1981 pagecache_get_page+0x26/0x190 mm/folio-compat.c:104 grab_cache_page_write_begin+0x2a/0x30 mm/folio-compat.c:116 ext4_da_write_begin+0x2dd/0x5f0 fs/ext4/inode.c:2988 generic_perform_write+0x1d4/0x3f0 mm/filemap.c:3738 ext4_buffered_write_iter+0x235/0x3e0 fs/ext4/file.c:270 ext4_file_write_iter+0x2e3/0x1210 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x468/0x760 fs/read_write.c:578 ksys_write+0xe8/0x1a0 fs/read_write.c:631 __do_sys_write fs/read_write.c:643 [inline] __se_sys_write fs/read_write.c:640 [inline] __x64_sys_write+0x3e/0x50 fs/read_write.c:640 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffffea0004a1d2c8 of 8 bytes by task 18611 on cpu 1: page_is_pfmemalloc include/linux/mm.h:1740 [inline] __skb_fill_page_desc include/linux/skbuff.h:2422 [inline] skb_fill_page_desc include/linux/skbuff.h:2443 [inline] tcp_build_frag+0x613/0xb20 net/ipv4/tcp.c:1018 do_tcp_sendpages+0x3e8/0xaf0 net/ipv4/tcp.c:1075 tcp_sendpage_locked net/ipv4/tcp.c:1140 [inline] tcp_sendpage+0x89/0xb0 net/ipv4/tcp.c:1150 inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833 kernel_sendpage+0x184/0x300 net/socket.c:3561 sock_sendpage+0x5a/0x70 net/socket.c:1054 pipe_to_sendpage+0x128/0x160 fs/splice.c:361 splice_from_pipe_feed fs/splice.c:415 [inline] __splice_from_pipe+0x222/0x4d0 fs/splice.c:559 splice_from_pipe fs/splice.c:594 [inline] generic_splice_sendpage+0x89/0xc0 fs/splice.c:743 do_splice_from fs/splice.c:764 [inline] direct_splice_actor+0x80/0xa0 fs/splice.c:931 splice_direct_to_actor+0x305/0x620 fs/splice.c:886 do_splice_direct+0xfb/0x180 fs/splice.c:974 do_sendfile+0x3bf/0x910 fs/read_write.c:1249 __do_sys_sendfile64 fs/read_write.c:1317 [inline] __se_sys_sendfile64 fs/read_write.c:1303 [inline] __x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1303 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xffffea0004a1d288 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 18611 Comm: syz-executor.4 Not tainted 6.0.0-rc2-syzkaller-00248-ge022620b5d05-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022

In the Linux kernel, the following vulnerability has been resolved: drm/gma500: Fix BUG: sleeping function called from invalid context errors gma_crtc_page_flip() was holding the event_lock spinlock while calling crtc_funcs->mode_set_base() which takes ww_mutex. The only reason to hold event_lock is to clear gma_crtc->page_flip_event on mode_set_base() errors. Instead unlock it after setting gma_crtc->page_flip_event and on errors re-take the lock and clear gma_crtc->page_flip_event it it is still set. This fixes the following WARN/stacktrace: [ 512.122953] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:870 [ 512.123004] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1253, name: gnome-shell [ 512.123031] preempt_count: 1, expected: 0 [ 512.123048] RCU nest depth: 0, expected: 0 [ 512.123066] INFO: lockdep is turned off. [ 512.123080] irq event stamp: 0 [ 512.123094] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 512.123134] hardirqs last disabled at (0): [<ffffffff8d0ec28c>] copy_process+0x9fc/0x1de0 [ 512.123176] softirqs last enabled at (0): [<ffffffff8d0ec28c>] copy_process+0x9fc/0x1de0 [ 512.123207] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 512.123233] Preemption disabled at: [ 512.123241] [<0000000000000000>] 0x0 [ 512.123275] CPU: 3 PID: 1253 Comm: gnome-shell Tainted: G W 5.19.0+ #1 [ 512.123304] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013 [ 512.123323] Call Trace: [ 512.123346] <TASK> [ 512.123370] dump_stack_lvl+0x5b/0x77 [ 512.123412] __might_resched.cold+0xff/0x13a [ 512.123458] ww_mutex_lock+0x1e/0xa0 [ 512.123495] psb_gem_pin+0x2c/0x150 [gma500_gfx] [ 512.123601] gma_pipe_set_base+0x76/0x240 [gma500_gfx] [ 512.123708] gma_crtc_page_flip+0x95/0x130 [gma500_gfx] [ 512.123808] drm_mode_page_flip_ioctl+0x57d/0x5d0 [ 512.123897] ? drm_mode_cursor2_ioctl+0x10/0x10 [ 512.123936] drm_ioctl_kernel+0xa1/0x150 [ 512.123984] drm_ioctl+0x21f/0x420 [ 512.124025] ? drm_mode_cursor2_ioctl+0x10/0x10 [ 512.124070] ? rcu_read_lock_bh_held+0xb/0x60 [ 512.124104] ? lock_release+0x1ef/0x2d0 [ 512.124161] __x64_sys_ioctl+0x8d/0xd0 [ 512.124203] do_syscall_64+0x58/0x80 [ 512.124239] ? do_syscall_64+0x67/0x80 [ 512.124267] ? trace_hardirqs_on_prepare+0x55/0xe0 [ 512.124300] ? do_syscall_64+0x67/0x80 [ 512.124340] ? rcu_read_lock_sched_held+0x10/0x80 [ 512.124377] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 512.124411] RIP: 0033:0x7fcc4a70740f [ 512.124442] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 [ 512.124470] RSP: 002b:00007ffda73f5390 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 512.124503] RAX: ffffffffffffffda RBX: 000055cc9e474500 RCX: 00007fcc4a70740f [ 512.124524] RDX: 00007ffda73f5420 RSI: 00000000c01864b0 RDI: 0000000000000009 [ 512.124544] RBP: 00007ffda73f5420 R08: 000055cc9c0b0cb0 R09: 0000000000000034 [ 512.124564] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c01864b0 [ 512.124584] R13: 0000000000000009 R14: 000055cc9df484d0 R15: 000055cc9af5d0c0 [ 512.124647] </TASK>

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix possible bogus match in nf_osf_find() nf_osf_find() incorrectly returns true on mismatch, this leads to copying uninitialized memory area in nft_osf which can be used to leak stale kernel stack data to userspace.

In the Linux kernel, the following vulnerability has been resolved: cgroup: cgroup_get_from_id() must check the looked-up kn is a directory cgroup has to be one kernfs dir, otherwise kernel panic is caused, especially cgroup id is provide from userspace.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an out-of-bounds array access may lead to denial of service, information disclosure, or data tampering.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an integer overflow may lead to information disclosure, data tampering or denial of service.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an integer overflow may lead to denial of service, data tampering, or information disclosure.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an integer overflow in index validation may lead to denial of service, information disclosure, or data tampering.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an out-of-bounds array access may lead to denial of service, data tampering, or information disclosure.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an off-by-one error may lead to data tampering or information disclosure.

A signal access-control issue was discovered in the Linux kernel before 5.6.5, aka CID-7395ea4e65c2. Because exec_id in include/linux/sched.h is only 32 bits, an integer overflow can interfere with a do_notify_parent protection mechanism. A child process can send an arbitrary signal to a parent process in a different security domain. Exploitation limitations include the amount of elapsed time before an integer overflow occurs, and the lack of scenarios where signals to a parent process present a substantial operational threat.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: clean up hook list when offload flags check fails splice back the hook list so nft_chain_release_hook() has a chance to release the hooks. BUG: memory leak unreferenced object 0xffff88810180b100 (size 96): comm "syz-executor133", pid 3619, jiffies 4294945714 (age 12.690s) hex dump (first 32 bytes): 28 64 23 02 81 88 ff ff 28 64 23 02 81 88 ff ff (d#.....(d#..... 90 a8 aa 83 ff ff ff ff 00 00 b5 0f 81 88 ff ff ................ backtrace: [<ffffffff83a8c59b>] kmalloc include/linux/slab.h:600 [inline] [<ffffffff83a8c59b>] nft_netdev_hook_alloc+0x3b/0xc0 net/netfilter/nf_tables_api.c:1901 [<ffffffff83a9239a>] nft_chain_parse_netdev net/netfilter/nf_tables_api.c:1998 [inline] [<ffffffff83a9239a>] nft_chain_parse_hook+0x33a/0x530 net/netfilter/nf_tables_api.c:2073 [<ffffffff83a9b14b>] nf_tables_addchain.constprop.0+0x10b/0x950 net/netfilter/nf_tables_api.c:2218 [<ffffffff83a9c41b>] nf_tables_newchain+0xa8b/0xc60 net/netfilter/nf_tables_api.c:2593 [<ffffffff83a3d6a6>] nfnetlink_rcv_batch+0xa46/0xd20 net/netfilter/nfnetlink.c:517 [<ffffffff83a3db79>] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:638 [inline] [<ffffffff83a3db79>] nfnetlink_rcv+0x1f9/0x220 net/netfilter/nfnetlink.c:656 [<ffffffff83a13b17>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] [<ffffffff83a13b17>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345 [<ffffffff83a13fd6>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921 [<ffffffff83865ab6>] sock_sendmsg_nosec net/socket.c:714 [inline] [<ffffffff83865ab6>] sock_sendmsg+0x56/0x80 net/socket.c:734 [<ffffffff8386601c>] ____sys_sendmsg+0x36c/0x390 net/socket.c:2482 [<ffffffff8386a918>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536 [<ffffffff8386aaa8>] __sys_sendmsg+0x88/0x100 net/socket.c:2565 [<ffffffff845e5955>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845e5955>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: tipc: improve size validations for received domain records The function tipc_mon_rcv() allows a node to receive and process domain_record structs from peer nodes to track their views of the network topology. This patch verifies that the number of members in a received domain record does not exceed the limit defined by MAX_MON_DOMAIN, something that may otherwise lead to a stack overflow. tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where we are reading a 32 bit message data length field into a uint16. To avert any risk of bit overflow, we add an extra sanity check for this in that function. We cannot see that happen with the current code, but future designers being unaware of this risk, may introduce it by allowing delivery of very large (> 64k) sk buffers from the bearer layer. This potential problem was identified by Eric Dumazet. This fixes CVE-2022-0435

In the Linux kernel, the following vulnerability has been resolved: net: amd-xgbe: Fix skb data length underflow There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors.

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a use-after-free Fix the following use-after-free complaint triggered by blktests nvme/004: BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350 Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460 Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e print_report.cold+0x36/0x1e2 kasan_report+0xb9/0xf0 __asan_load4+0x6b/0x80 blk_mq_complete_request_remote+0xac/0x350 nvme_loop_queue_response+0x1df/0x275 [nvme_loop] __nvmet_req_complete+0x132/0x4f0 [nvmet] nvmet_req_complete+0x15/0x40 [nvmet] nvmet_execute_io_connect+0x18a/0x1f0 [nvmet] nvme_loop_execute_work+0x20/0x30 [nvme_loop] process_one_work+0x56e/0xa70 worker_thread+0x2d1/0x640 kthread+0x183/0x1c0 ret_from_fork+0x1f/0x30

A use after free flaw was found in hfsplus_put_super in fs/hfsplus/super.c in the Linux Kernel. This flaw could allow a local user to cause a denial of service problem.

kernel/ucount.c in the Linux kernel 5.14 through 5.16.4, when unprivileged user namespaces are enabled, allows a use-after-free and privilege escalation because a ucounts object can outlive its namespace.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free due to race with dev replace While loading a zone's info during creation of a block group, we can race with a device replace operation and then trigger a use-after-free on the device that was just replaced (source device of the replace operation). This happens because at btrfs_load_zone_info() we extract a device from the chunk map into a local variable and then use the device while not under the protection of the device replace rwsem. So if there's a device replace operation happening when we extract the device and that device is the source of the replace operation, we will trigger a use-after-free if before we finish using the device the replace operation finishes and frees the device. Fix this by enlarging the critical section under the protection of the device replace rwsem so that all uses of the device are done inside the critical section.

In the Linux kernel, the following vulnerability has been resolved: greybus: Fix use-after-free bug in gb_interface_release due to race condition. In gb_interface_create, &intf->mode_switch_completion is bound with gb_interface_mode_switch_work. Then it will be started by gb_interface_request_mode_switch. Here is the relevant code. if (!queue_work(system_long_wq, &intf->mode_switch_work)) { ... } If we call gb_interface_release to make cleanup, there may be an unfinished work. This function will call kfree to free the object "intf". However, if gb_interface_mode_switch_work is scheduled to run after kfree, it may cause use-after-free error as gb_interface_mode_switch_work will use the object "intf". The possible execution flow that may lead to the issue is as follows: CPU0 CPU1 | gb_interface_create | gb_interface_request_mode_switch gb_interface_release | kfree(intf) (free) | | gb_interface_mode_switch_work | mutex_lock(&intf->mutex) (use) Fix it by canceling the work before kfree.

A use-after-free issue was found in the way the Linux kernel's KVM hypervisor processed posted interrupts when nested(=1) virtualization is enabled. In nested_get_vmcs12_pages(), in case of an error while processing posted interrupt address, it unmaps the 'pi_desc_page' without resetting 'pi_desc' descriptor address, which is later used in pi_test_and_clear_on(). A guest user/process could use this flaw to crash the host kernel resulting in DoS or potentially gain privileged access to a system. Kernel versions before 4.14.91 and before 4.19.13 are vulnerable.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read() We got the following issue in a fuzz test of randomly issuing the restore command: ================================================================== BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60 Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963 CPU: 13 PID: 963 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #564 Call Trace: kasan_report+0x93/0xc0 cachefiles_ondemand_daemon_read+0xb41/0xb60 vfs_read+0x169/0xb50 ksys_read+0xf5/0x1e0 Allocated by task 116: kmem_cache_alloc+0x140/0x3a0 cachefiles_lookup_cookie+0x140/0xcd0 fscache_cookie_state_machine+0x43c/0x1230 [...] Freed by task 792: kmem_cache_free+0xfe/0x390 cachefiles_put_object+0x241/0x480 fscache_cookie_state_machine+0x5c8/0x1230 [...] ================================================================== Following is the process that triggers the issue: mount | daemon_thread1 | daemon_thread2 ------------------------------------------------------------ cachefiles_withdraw_cookie cachefiles_ondemand_clean_object(object) cachefiles_ondemand_send_req REQ_A = kzalloc(sizeof(*req) + data_len) wait_for_completion(&REQ_A->done) cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req msg->object_id = req->object->ondemand->ondemand_id ------ restore ------ cachefiles_ondemand_restore xas_for_each(&xas, req, ULONG_MAX) xas_set_mark(&xas, CACHEFILES_REQ_NEW) cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req copy_to_user(_buffer, msg, n) xa_erase(&cache->reqs, id) complete(&REQ_A->done) ------ close(fd) ------ cachefiles_ondemand_fd_release cachefiles_put_object cachefiles_put_object kmem_cache_free(cachefiles_object_jar, object) REQ_A->object->ondemand->ondemand_id // object UAF !!! When we see the request within xa_lock, req->object must not have been freed yet, so grab the reference count of object before xa_unlock to avoid the above issue.

In the Linux kernel, the following vulnerability has been resolved: 9p: add missing locking around taking dentry fid list Fix a use-after-free on dentry's d_fsdata fid list when a thread looks up a fid through dentry while another thread unlinks it: UAF thread: refcount_t: addition on 0; use-after-free. p9_fid_get linux/./include/net/9p/client.h:262 v9fs_fid_find+0x236/0x280 linux/fs/9p/fid.c:129 v9fs_fid_lookup_with_uid linux/fs/9p/fid.c:181 v9fs_fid_lookup+0xbf/0xc20 linux/fs/9p/fid.c:314 v9fs_vfs_getattr_dotl+0xf9/0x360 linux/fs/9p/vfs_inode_dotl.c:400 vfs_statx+0xdd/0x4d0 linux/fs/stat.c:248 Freed by: p9_fid_destroy (inlined) p9_client_clunk+0xb0/0xe0 linux/net/9p/client.c:1456 p9_fid_put linux/./include/net/9p/client.h:278 v9fs_dentry_release+0xb5/0x140 linux/fs/9p/vfs_dentry.c:55 v9fs_remove+0x38f/0x620 linux/fs/9p/vfs_inode.c:518 vfs_unlink+0x29a/0x810 linux/fs/namei.c:4335 The problem is that d_fsdata was not accessed under d_lock, because d_release() normally is only called once the dentry is otherwise no longer accessible but since we also call it explicitly in v9fs_remove that lock is required: move the hlist out of the dentry under lock then unref its fids once they are no longer accessible.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Discard command completions in internal error Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40

In the Linux kernel, the following vulnerability has been resolved: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() irq_find_at_or_after() dereferences the interrupt descriptor which is returned by mt_find() while neither holding sparse_irq_lock nor RCU read lock, which means the descriptor can be freed between mt_find() and the dereference: CPU0 CPU1 desc = mt_find() delayed_free_desc(desc) irq_desc_get_irq(desc) The use-after-free is reported by KASAN: Call trace: irq_get_next_irq+0x58/0x84 show_stat+0x638/0x824 seq_read_iter+0x158/0x4ec proc_reg_read_iter+0x94/0x12c vfs_read+0x1e0/0x2c8 Freed by task 4471: slab_free_freelist_hook+0x174/0x1e0 __kmem_cache_free+0xa4/0x1dc kfree+0x64/0x128 irq_kobj_release+0x28/0x3c kobject_put+0xcc/0x1e0 delayed_free_desc+0x14/0x2c rcu_do_batch+0x214/0x720 Guard the access with a RCU read lock section.

In the Linux kernel, the following vulnerability has been resolved: kunit: Fix kthread reference There is a race condition when a kthread finishes after the deadline and before the call to kthread_stop(), which may lead to use after free.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix UAF for cq async event The refcount of CQ is not protected by locks. When CQ asynchronous events and CQ destruction are concurrent, CQ may have been released, which will cause UAF. Use the xa_lock() to protect the CQ refcount.

In the Linux kernel, the following vulnerability has been resolved: net: fix __dst_negative_advice() race __dst_negative_advice() does not enforce proper RCU rules when sk->dst_cache must be cleared, leading to possible UAF. RCU rules are that we must first clear sk->sk_dst_cache, then call dst_release(old_dst). Note that sk_dst_reset(sk) is implementing this protocol correctly, while __dst_negative_advice() uses the wrong order. Given that ip6_negative_advice() has special logic against RTF_CACHE, this means each of the three ->negative_advice() existing methods must perform the sk_dst_reset() themselves. Note the check against NULL dst is centralized in __dst_negative_advice(), there is no need to duplicate it in various callbacks. Many thanks to Clement Lecigne for tracking this issue. This old bug became visible after the blamed commit, using UDP sockets.

In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix a use-after-free related to destroying CM IDs iw_conn_req_handler() associates a new struct rdma_id_private (conn_id) with an existing struct iw_cm_id (cm_id) as follows: conn_id->cm_id.iw = cm_id; cm_id->context = conn_id; cm_id->cm_handler = cma_iw_handler; rdma_destroy_id() frees both the cm_id and the struct rdma_id_private. Make sure that cm_work_handler() does not trigger a use-after-free by only freeing of the struct rdma_id_private after all pending work has finished.

Use-after-free vulnerability in mm/mprotect.c in the Linux kernel before 2.6.37-rc2 allows local users to cause a denial of service via vectors involving an mprotect system call.

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Fix use after free in lineinfo_changed_notify The use-after-free issue occurs as follows: when the GPIO chip device file is being closed by invoking gpio_chrdev_release(), watched_lines is freed by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier chain failed due to waiting write rwsem. Additionally, one of the GPIO chip's lines is also in the release process and holds the notifier chain's read rwsem. Consequently, a race condition leads to the use-after-free of watched_lines. Here is the typical stack when issue happened: [free] gpio_chrdev_release() --> bitmap_free(cdev->watched_lines) <-- freed --> blocking_notifier_chain_unregister() --> down_write(&nh->rwsem) <-- waiting rwsem --> __down_write_common() --> rwsem_down_write_slowpath() --> schedule_preempt_disabled() --> schedule() [use] st54spi_gpio_dev_release() --> gpio_free() --> gpiod_free() --> gpiod_free_commit() --> gpiod_line_state_notify() --> blocking_notifier_call_chain() --> down_read(&nh->rwsem); <-- held rwsem --> notifier_call_chain() --> lineinfo_changed_notify() --> test_bit(xxxx, cdev->watched_lines) <-- use after free The side effect of the use-after-free issue is that a GPIO line event is being generated for userspace where it shouldn't. However, since the chrdev is being closed, userspace won't have the chance to read that event anyway. To fix the issue, call the bitmap_free() function after the unregistration of lineinfo_changed_nb notifier chain.

io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_stats_proc_show() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach This is the candidate patch of CVE-2023-47233 : https://nvd.nist.gov/vuln/detail/CVE-2023-47233 In brcm80211 driver,it starts with the following invoking chain to start init a timeout worker: ->brcmf_usb_probe ->brcmf_usb_probe_cb ->brcmf_attach ->brcmf_bus_started ->brcmf_cfg80211_attach ->wl_init_priv ->brcmf_init_escan ->INIT_WORK(&cfg->escan_timeout_work, brcmf_cfg80211_escan_timeout_worker); If we disconnect the USB by hotplug, it will call brcmf_usb_disconnect to make cleanup. The invoking chain is : brcmf_usb_disconnect ->brcmf_usb_disconnect_cb ->brcmf_detach ->brcmf_cfg80211_detach ->kfree(cfg); While the timeout woker may still be running. This will cause a use-after-free bug on cfg in brcmf_cfg80211_escan_timeout_worker. Fix it by deleting the timer and canceling the worker in brcmf_cfg80211_detach. [arend.vanspriel@broadcom.com: keep timer delete as is and cancel work just before free]

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps There could be a potential use-after-free case in tcpm_register_source_caps(). This could happen when: * new (say invalid) source caps are advertised * the existing source caps are unregistered * tcpm_register_source_caps() returns with an error as usb_power_delivery_register_capabilities() fails This causes port->partner_source_caps to hold on to the now freed source caps. Reset port->partner_source_caps value to NULL after unregistering existing source caps.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in order to avoid unnecessary writes to the MSR. On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which wipes out any stale state. But the per CPU cached xfd value is not reset, which brings them out of sync. As a consequence a subsequent xfd_update_state() might fail to update the MSR which in turn can result in XRSTOR raising a #NM in kernel space, which crashes the kernel. To fix this, introduce xfd_set_state() to write xfd_state together with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD.

In the Linux kernel, the following vulnerability has been resolved: netns: Make get_net_ns() handle zero refcount net Syzkaller hit a warning: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 7890 at lib/refcount.c:25 refcount_warn_saturate+0xdf/0x1d0 Modules linked in: CPU: 3 PID: 7890 Comm: tun Not tainted 6.10.0-rc3-00100-gcaa4f9578aba-dirty #310 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:refcount_warn_saturate+0xdf/0x1d0 Code: 41 49 04 31 ff 89 de e8 9f 1e cd fe 84 db 75 9c e8 76 26 cd fe c6 05 b6 41 49 04 01 90 48 c7 c7 b8 8e 25 86 e8 d2 05 b5 fe 90 <0f> 0b 90 90 e9 79 ff ff ff e8 53 26 cd fe 0f b6 1 RSP: 0018:ffff8881067b7da0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff811c72ac RDX: ffff8881026a2140 RSI: ffffffff811c72b5 RDI: 0000000000000001 RBP: ffff8881067b7db0 R08: 0000000000000000 R09: 205b5d3730353139 R10: 0000000000000000 R11: 205d303938375420 R12: ffff8881086500c4 R13: ffff8881086500c4 R14: ffff8881086500b0 R15: ffff888108650040 FS: 00007f5b2961a4c0(0000) GS:ffff88823bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055d7ed36fd18 CR3: 00000001482f6000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0xa3/0xc0 ? __warn+0xa5/0x1c0 ? refcount_warn_saturate+0xdf/0x1d0 ? report_bug+0x1fc/0x2d0 ? refcount_warn_saturate+0xdf/0x1d0 ? handle_bug+0xa1/0x110 ? exc_invalid_op+0x3c/0xb0 ? asm_exc_invalid_op+0x1f/0x30 ? __warn_printk+0xcc/0x140 ? __warn_printk+0xd5/0x140 ? refcount_warn_saturate+0xdf/0x1d0 get_net_ns+0xa4/0xc0 ? __pfx_get_net_ns+0x10/0x10 open_related_ns+0x5a/0x130 __tun_chr_ioctl+0x1616/0x2370 ? __sanitizer_cov_trace_switch+0x58/0xa0 ? __sanitizer_cov_trace_const_cmp2+0x1c/0x30 ? __pfx_tun_chr_ioctl+0x10/0x10 tun_chr_ioctl+0x2f/0x40 __x64_sys_ioctl+0x11b/0x160 x64_sys_call+0x1211/0x20d0 do_syscall_64+0x9e/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5b28f165d7 Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 8 RSP: 002b:00007ffc2b59c5e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5b28f165d7 RDX: 0000000000000000 RSI: 00000000000054e3 RDI: 0000000000000003 RBP: 00007ffc2b59c650 R08: 00007f5b291ed8c0 R09: 00007f5b2961a4c0 R10: 0000000029690010 R11: 0000000000000246 R12: 0000000000400730 R13: 00007ffc2b59cf40 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: kernel: panic_on_warn set ... This is trigger as below: ns0 ns1 tun_set_iff() //dev is tun0 tun->dev = dev //ip link set tun0 netns ns1 put_net() //ref is 0 __tun_chr_ioctl() //TUNGETDEVNETNS net = dev_net(tun->dev); open_related_ns(&net->ns, get_net_ns); //ns1 get_net_ns() get_net() //addition on 0 Use maybe_get_net() in get_net_ns in case net's ref is zero to fix this

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_dump_full_key() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in is_valid_oplock_break() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_is_valid_oplock_break() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: smb: client: guarantee refcounted children from parent session Avoid potential use-after-free bugs when walking DFS referrals, mounting and performing DFS failover by ensuring that all children from parent @tcon->ses are also refcounted. They're all needed across the entire DFS mount. Get rid of @tcon->dfs_ses_list while we're at it, too.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Use device rbtree in iopf reporting path The existing I/O page fault handler currently locates the PCI device by calling pci_get_domain_bus_and_slot(). This function searches the list of all PCI devices until the desired device is found. To improve lookup efficiency, replace it with device_rbtree_find() to search the device within the probed device rbtree. The I/O page fault is initiated by the device, which does not have any synchronization mechanism with the software to ensure that the device stays in the probed device tree. Theoretically, a device could be released by the IOMMU subsystem after device_rbtree_find() and before iopf_get_dev_fault_param(), which would cause a use-after-free problem. Add a mutex to synchronize the I/O page fault reporting path and the IOMMU release device path. This lock doesn't introduce any performance overhead, as the conflict between I/O page fault reporting and device releasing is very rare.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: msft: fix slab-use-after-free in msft_do_close() Tying the msft->data lifetime to hdev by freeing it in hci_release_dev() to fix the following case: [use] msft_do_close() msft = hdev->msft_data; if (!msft) ...(1) <- passed. return; mutex_lock(&msft->filter_lock); ...(4) <- used after freed. [free] msft_unregister() msft = hdev->msft_data; hdev->msft_data = NULL; ...(2) kfree(msft); ...(3) <- msft is freed. ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30 kernel/locking/mutex.c:752 Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309