In the Linux kernel, the following vulnerability has been resolved: phylib: fix potential use-after-free Commit bafbdd527d56 ("phylib: Add device reset GPIO support") added call to phy_device_reset(phydev) after the put_device() call in phy_detach(). The comment before the put_device() call says that the phydev might go away with put_device(). Fix potential use-after-free by calling phy_device_reset() before put_device().

In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix Use-after-Free, hold skb ref while in use This patch fixes a Use-after-Free found by the syzbot. The problem is that a skb is taken from the per-session skb queue, without incrementing the ref count. This leads to a Use-after-Free if the skb is taken concurrently from the session queue due to a CTS.

In the Linux kernel, the following vulnerability has been resolved: can: peak_pci: peak_pci_remove(): fix UAF When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250

In the Linux kernel, the following vulnerability has been resolved: sh: push-switch: Reorder cleanup operations to avoid use-after-free bug The original code puts flush_work() before timer_shutdown_sync() in switch_drv_remove(). Although we use flush_work() to stop the worker, it could be rescheduled in switch_timer(). As a result, a use-after-free bug can occur. The details are shown below: (cpu 0) | (cpu 1) switch_drv_remove() | flush_work() | ... | switch_timer // timer | schedule_work(&psw->work) timer_shutdown_sync() | ... | switch_work_handler // worker kfree(psw) // free | | psw->state = 0 // use This patch puts timer_shutdown_sync() before flush_work() to mitigate the bugs. As a result, the worker and timer will be stopped safely before the deallocate operations.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: Avoid potential use after free in MHI send It is possible that the MHI ul_callback will be invoked immediately following the queueing of the skb for transmission, leading to the callback decrementing the refcount of the associated sk and freeing the skb. As such the dereference of skb and the increment of the sk refcount must happen before the skb is queued, to avoid the skb to be used after free and potentially the sk to drop its last refcount..

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix list corruption from reorder of WRITE ->lqueued __blkcg_rstat_flush() can be run anytime, especially when blk_cgroup_bio_start is being executed. If WRITE of `->lqueued` is re-ordered with READ of 'bisc->lnode.next' in the loop of __blkcg_rstat_flush(), `next_bisc` can be assigned with one stat instance being added in blk_cgroup_bio_start(), then the local list in __blkcg_rstat_flush() could be corrupted. Fix the issue by adding one barrier.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 db2set is vulnerable to a buffer overflow, caused by improper bounds checking. An attacker could overflow the buffer and execute arbitrary code. IBM X-Force ID: 252184.

In the Linux kernel, the following vulnerability has been resolved: bcachefs: Check for journal entries overruning end of sb clean section Fix a missing bounds check in superblock validation. Note that we don't yet have repair code for this case - repair code for individual items is generally low priority, since the whole superblock is checksummed, validated prior to write, and we have backups.

IBM Security Guardium 11.3 could allow a local user to escalate their privileges due to improper permission controls. IBM X-Force ID: 240908.

IBM Spectrum Scale Container Native Storage Access 5.1.2.1 through 5.1.6.0 contains an unspecified vulnerability that could allow a local user to obtain root privileges. IBM X-Force ID: 237810.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ en ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Add check for negative db_l2nbperpage l2nbperpage is log2(number of blks per page), and the minimum legal value should be 0, not negative. In the case of l2nbperpage being negative, an error will occur when subsequently used as shift exponent. Syzbot reported this bug: UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12 shift exponent -16777216 is negative

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab out of bounds write in smb_inherit_dacl() slab out-of-bounds write is caused by that offsets is bigger than pntsd allocation size. This patch add the check to validate 3 offsets using allocation size.

The perf_swevent_init function in kernel/events/core.c in the Linux kernel before 3.8.9 uses an incorrect integer data type, which allows local users to gain privileges via a crafted perf_event_open system call.

An issue was discovered in EMC ScaleIO 2.0.1.x. In a Linux environment, one of the support scripts saves the credentials of the ScaleIO MDM user who executed the script in clear text in temporary log files. The temporary files may potentially be read by an unprivileged user with access to the server where the script was executed to recover exposed credentials.

In the hidp_process_report in bluetooth, there is an integer overflow. This could lead to an out of bounds write with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android kernel Android ID: A-65853588 References: Upstream kernel.

In the Linux kernel, the following vulnerability has been resolved: exec: Fix ToCToU between perm check and set-uid/gid usage When opening a file for exec via do_filp_open(), permission checking is done against the file's metadata at that moment, and on success, a file pointer is passed back. Much later in the execve() code path, the file metadata (specifically mode, uid, and gid) is used to determine if/how to set the uid and gid. However, those values may have changed since the permissions check, meaning the execution may gain unintended privileges. For example, if a file could change permissions from executable and not set-id: ---------x 1 root root 16048 Aug 7 13:16 target to set-id and non-executable: ---S------ 1 root root 16048 Aug 7 13:16 target it is possible to gain root privileges when execution should have been disallowed. While this race condition is rare in real-world scenarios, it has been observed (and proven exploitable) when package managers are updating the setuid bits of installed programs. Such files start with being world-executable but then are adjusted to be group-exec with a set-uid bit. For example, "chmod o-x,u+s target" makes "target" executable only by uid "root" and gid "cdrom", while also becoming setuid-root: -rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target becomes: -rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target But racing the chmod means users without group "cdrom" membership can get the permission to execute "target" just before the chmod, and when the chmod finishes, the exec reaches brpm_fill_uid(), and performs the setuid to root, violating the expressed authorization of "only cdrom group members can setuid to root". Re-check that we still have execute permissions in case the metadata has changed. It would be better to keep a copy from the perm-check time, but until we can do that refactoring, the least-bad option is to do a full inode_permission() call (under inode lock). It is understood that this is safe against dead-locks, but hardly optimal.

A heap-based buffer overflow flaw was found in the way the legacy_parse_param function in the Filesystem Context functionality of the Linux kernel verified the supplied parameters length. An unprivileged (in case of unprivileged user namespaces enabled, otherwise needs namespaced CAP_SYS_ADMIN privilege) local user able to open a filesystem that does not support the Filesystem Context API (and thus fallbacks to legacy handling) could use this flaw to escalate their privileges on the system.

NuProcess is an external process execution implementation for Java. In all the versions of NuProcess where it forks processes by using the JVM's Java_java_lang_UNIXProcess_forkAndExec method (1.2.0+), attackers can use NUL characters in their strings to perform command line injection. Java's ProcessBuilder isn't vulnerable because of a check in ProcessBuilder.start. NuProcess is missing that check. This vulnerability can only be exploited to inject command line arguments on Linux. Version 2.0.5 contains a patch. As a workaround, users of the library can sanitize command strings to remove NUL characters prior to passing them to NuProcess for execution.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Fix potential memleak in cppc_cpufreq_cpu_init It's a classic example of memleak, we allocate something, we fail and never free the resources. Make sure we free all resources on policy ->init() failures.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fixed overflow check in mi_enum_attr()

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Add some bounds checking to firmware data Smatch complains about "head->full_size - head->header_size" can underflow. To some extent, we're always going to have to trust the firmware a bit. However, it's easy enough to add a check for negatives, and let's add a upper bounds check as well.

In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix nr_cpus < nr_iaa case If nr_cpus < nr_iaa, the calculated cpus_per_iaa will be 0, which causes a divide-by-0 in rebalance_wq_table(). Make sure cpus_per_iaa is 1 in that case, and also in the nr_iaa == 0 case, even though cpus_per_iaa is never used if nr_iaa == 0, for paranoia.

IBM InfoSphere Information Server 11.7 could allow a local user to execute privileged commands due to the improper handling of permissions.

A use after free flaw was found in hfsplus_put_super in fs/hfsplus/super.c in the Linux Kernel. This flaw could allow a local user to cause a denial of service problem.

kernel/ucount.c in the Linux kernel 5.14 through 5.16.4, when unprivileged user namespaces are enabled, allows a use-after-free and privilege escalation because a ucounts object can outlive its namespace.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free due to race with dev replace While loading a zone's info during creation of a block group, we can race with a device replace operation and then trigger a use-after-free on the device that was just replaced (source device of the replace operation). This happens because at btrfs_load_zone_info() we extract a device from the chunk map into a local variable and then use the device while not under the protection of the device replace rwsem. So if there's a device replace operation happening when we extract the device and that device is the source of the replace operation, we will trigger a use-after-free if before we finish using the device the replace operation finishes and frees the device. Fix this by enlarging the critical section under the protection of the device replace rwsem so that all uses of the device are done inside the critical section.

In the Linux kernel, the following vulnerability has been resolved: greybus: Fix use-after-free bug in gb_interface_release due to race condition. In gb_interface_create, &intf->mode_switch_completion is bound with gb_interface_mode_switch_work. Then it will be started by gb_interface_request_mode_switch. Here is the relevant code. if (!queue_work(system_long_wq, &intf->mode_switch_work)) { ... } If we call gb_interface_release to make cleanup, there may be an unfinished work. This function will call kfree to free the object "intf". However, if gb_interface_mode_switch_work is scheduled to run after kfree, it may cause use-after-free error as gb_interface_mode_switch_work will use the object "intf". The possible execution flow that may lead to the issue is as follows: CPU0 CPU1 | gb_interface_create | gb_interface_request_mode_switch gb_interface_release | kfree(intf) (free) | | gb_interface_mode_switch_work | mutex_lock(&intf->mutex) (use) Fix it by canceling the work before kfree.

A use-after-free issue was found in the way the Linux kernel's KVM hypervisor processed posted interrupts when nested(=1) virtualization is enabled. In nested_get_vmcs12_pages(), in case of an error while processing posted interrupt address, it unmaps the 'pi_desc_page' without resetting 'pi_desc' descriptor address, which is later used in pi_test_and_clear_on(). A guest user/process could use this flaw to crash the host kernel resulting in DoS or potentially gain privileged access to a system. Kernel versions before 4.14.91 and before 4.19.13 are vulnerable.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read() We got the following issue in a fuzz test of randomly issuing the restore command: ================================================================== BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60 Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963 CPU: 13 PID: 963 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #564 Call Trace: kasan_report+0x93/0xc0 cachefiles_ondemand_daemon_read+0xb41/0xb60 vfs_read+0x169/0xb50 ksys_read+0xf5/0x1e0 Allocated by task 116: kmem_cache_alloc+0x140/0x3a0 cachefiles_lookup_cookie+0x140/0xcd0 fscache_cookie_state_machine+0x43c/0x1230 [...] Freed by task 792: kmem_cache_free+0xfe/0x390 cachefiles_put_object+0x241/0x480 fscache_cookie_state_machine+0x5c8/0x1230 [...] ================================================================== Following is the process that triggers the issue: mount | daemon_thread1 | daemon_thread2 ------------------------------------------------------------ cachefiles_withdraw_cookie cachefiles_ondemand_clean_object(object) cachefiles_ondemand_send_req REQ_A = kzalloc(sizeof(*req) + data_len) wait_for_completion(&REQ_A->done) cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req msg->object_id = req->object->ondemand->ondemand_id ------ restore ------ cachefiles_ondemand_restore xas_for_each(&xas, req, ULONG_MAX) xas_set_mark(&xas, CACHEFILES_REQ_NEW) cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req copy_to_user(_buffer, msg, n) xa_erase(&cache->reqs, id) complete(&REQ_A->done) ------ close(fd) ------ cachefiles_ondemand_fd_release cachefiles_put_object cachefiles_put_object kmem_cache_free(cachefiles_object_jar, object) REQ_A->object->ondemand->ondemand_id // object UAF !!! When we see the request within xa_lock, req->object must not have been freed yet, so grab the reference count of object before xa_unlock to avoid the above issue.

In the Linux kernel, the following vulnerability has been resolved: 9p: add missing locking around taking dentry fid list Fix a use-after-free on dentry's d_fsdata fid list when a thread looks up a fid through dentry while another thread unlinks it: UAF thread: refcount_t: addition on 0; use-after-free. p9_fid_get linux/./include/net/9p/client.h:262 v9fs_fid_find+0x236/0x280 linux/fs/9p/fid.c:129 v9fs_fid_lookup_with_uid linux/fs/9p/fid.c:181 v9fs_fid_lookup+0xbf/0xc20 linux/fs/9p/fid.c:314 v9fs_vfs_getattr_dotl+0xf9/0x360 linux/fs/9p/vfs_inode_dotl.c:400 vfs_statx+0xdd/0x4d0 linux/fs/stat.c:248 Freed by: p9_fid_destroy (inlined) p9_client_clunk+0xb0/0xe0 linux/net/9p/client.c:1456 p9_fid_put linux/./include/net/9p/client.h:278 v9fs_dentry_release+0xb5/0x140 linux/fs/9p/vfs_dentry.c:55 v9fs_remove+0x38f/0x620 linux/fs/9p/vfs_inode.c:518 vfs_unlink+0x29a/0x810 linux/fs/namei.c:4335 The problem is that d_fsdata was not accessed under d_lock, because d_release() normally is only called once the dentry is otherwise no longer accessible but since we also call it explicitly in v9fs_remove that lock is required: move the hlist out of the dentry under lock then unref its fids once they are no longer accessible.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Discard command completions in internal error Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40

In the Linux kernel, the following vulnerability has been resolved: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() irq_find_at_or_after() dereferences the interrupt descriptor which is returned by mt_find() while neither holding sparse_irq_lock nor RCU read lock, which means the descriptor can be freed between mt_find() and the dereference: CPU0 CPU1 desc = mt_find() delayed_free_desc(desc) irq_desc_get_irq(desc) The use-after-free is reported by KASAN: Call trace: irq_get_next_irq+0x58/0x84 show_stat+0x638/0x824 seq_read_iter+0x158/0x4ec proc_reg_read_iter+0x94/0x12c vfs_read+0x1e0/0x2c8 Freed by task 4471: slab_free_freelist_hook+0x174/0x1e0 __kmem_cache_free+0xa4/0x1dc kfree+0x64/0x128 irq_kobj_release+0x28/0x3c kobject_put+0xcc/0x1e0 delayed_free_desc+0x14/0x2c rcu_do_batch+0x214/0x720 Guard the access with a RCU read lock section.

In the Linux kernel, the following vulnerability has been resolved: kunit: Fix kthread reference There is a race condition when a kthread finishes after the deadline and before the call to kthread_stop(), which may lead to use after free.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix UAF for cq async event The refcount of CQ is not protected by locks. When CQ asynchronous events and CQ destruction are concurrent, CQ may have been released, which will cause UAF. Use the xa_lock() to protect the CQ refcount.

In the Linux kernel, the following vulnerability has been resolved: net: fix __dst_negative_advice() race __dst_negative_advice() does not enforce proper RCU rules when sk->dst_cache must be cleared, leading to possible UAF. RCU rules are that we must first clear sk->sk_dst_cache, then call dst_release(old_dst). Note that sk_dst_reset(sk) is implementing this protocol correctly, while __dst_negative_advice() uses the wrong order. Given that ip6_negative_advice() has special logic against RTF_CACHE, this means each of the three ->negative_advice() existing methods must perform the sk_dst_reset() themselves. Note the check against NULL dst is centralized in __dst_negative_advice(), there is no need to duplicate it in various callbacks. Many thanks to Clement Lecigne for tracking this issue. This old bug became visible after the blamed commit, using UDP sockets.

In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix a use-after-free related to destroying CM IDs iw_conn_req_handler() associates a new struct rdma_id_private (conn_id) with an existing struct iw_cm_id (cm_id) as follows: conn_id->cm_id.iw = cm_id; cm_id->context = conn_id; cm_id->cm_handler = cma_iw_handler; rdma_destroy_id() frees both the cm_id and the struct rdma_id_private. Make sure that cm_work_handler() does not trigger a use-after-free by only freeing of the struct rdma_id_private after all pending work has finished.

Use-after-free vulnerability in mm/mprotect.c in the Linux kernel before 2.6.37-rc2 allows local users to cause a denial of service via vectors involving an mprotect system call.

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Fix use after free in lineinfo_changed_notify The use-after-free issue occurs as follows: when the GPIO chip device file is being closed by invoking gpio_chrdev_release(), watched_lines is freed by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier chain failed due to waiting write rwsem. Additionally, one of the GPIO chip's lines is also in the release process and holds the notifier chain's read rwsem. Consequently, a race condition leads to the use-after-free of watched_lines. Here is the typical stack when issue happened: [free] gpio_chrdev_release() --> bitmap_free(cdev->watched_lines) <-- freed --> blocking_notifier_chain_unregister() --> down_write(&nh->rwsem) <-- waiting rwsem --> __down_write_common() --> rwsem_down_write_slowpath() --> schedule_preempt_disabled() --> schedule() [use] st54spi_gpio_dev_release() --> gpio_free() --> gpiod_free() --> gpiod_free_commit() --> gpiod_line_state_notify() --> blocking_notifier_call_chain() --> down_read(&nh->rwsem); <-- held rwsem --> notifier_call_chain() --> lineinfo_changed_notify() --> test_bit(xxxx, cdev->watched_lines) <-- use after free The side effect of the use-after-free issue is that a GPIO line event is being generated for userspace where it shouldn't. However, since the chrdev is being closed, userspace won't have the chance to read that event anyway. To fix the issue, call the bitmap_free() function after the unregistration of lineinfo_changed_nb notifier chain.

io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_stats_proc_show() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach This is the candidate patch of CVE-2023-47233 : https://nvd.nist.gov/vuln/detail/CVE-2023-47233 In brcm80211 driver,it starts with the following invoking chain to start init a timeout worker: ->brcmf_usb_probe ->brcmf_usb_probe_cb ->brcmf_attach ->brcmf_bus_started ->brcmf_cfg80211_attach ->wl_init_priv ->brcmf_init_escan ->INIT_WORK(&cfg->escan_timeout_work, brcmf_cfg80211_escan_timeout_worker); If we disconnect the USB by hotplug, it will call brcmf_usb_disconnect to make cleanup. The invoking chain is : brcmf_usb_disconnect ->brcmf_usb_disconnect_cb ->brcmf_detach ->brcmf_cfg80211_detach ->kfree(cfg); While the timeout woker may still be running. This will cause a use-after-free bug on cfg in brcmf_cfg80211_escan_timeout_worker. Fix it by deleting the timer and canceling the worker in brcmf_cfg80211_detach. [arend.vanspriel@broadcom.com: keep timer delete as is and cancel work just before free]

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps There could be a potential use-after-free case in tcpm_register_source_caps(). This could happen when: * new (say invalid) source caps are advertised * the existing source caps are unregistered * tcpm_register_source_caps() returns with an error as usb_power_delivery_register_capabilities() fails This causes port->partner_source_caps to hold on to the now freed source caps. Reset port->partner_source_caps value to NULL after unregistering existing source caps.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in order to avoid unnecessary writes to the MSR. On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which wipes out any stale state. But the per CPU cached xfd value is not reset, which brings them out of sync. As a consequence a subsequent xfd_update_state() might fail to update the MSR which in turn can result in XRSTOR raising a #NM in kernel space, which crashes the kernel. To fix this, introduce xfd_set_state() to write xfd_state together with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD.

In the Linux kernel, the following vulnerability has been resolved: netns: Make get_net_ns() handle zero refcount net Syzkaller hit a warning: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 7890 at lib/refcount.c:25 refcount_warn_saturate+0xdf/0x1d0 Modules linked in: CPU: 3 PID: 7890 Comm: tun Not tainted 6.10.0-rc3-00100-gcaa4f9578aba-dirty #310 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:refcount_warn_saturate+0xdf/0x1d0 Code: 41 49 04 31 ff 89 de e8 9f 1e cd fe 84 db 75 9c e8 76 26 cd fe c6 05 b6 41 49 04 01 90 48 c7 c7 b8 8e 25 86 e8 d2 05 b5 fe 90 <0f> 0b 90 90 e9 79 ff ff ff e8 53 26 cd fe 0f b6 1 RSP: 0018:ffff8881067b7da0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff811c72ac RDX: ffff8881026a2140 RSI: ffffffff811c72b5 RDI: 0000000000000001 RBP: ffff8881067b7db0 R08: 0000000000000000 R09: 205b5d3730353139 R10: 0000000000000000 R11: 205d303938375420 R12: ffff8881086500c4 R13: ffff8881086500c4 R14: ffff8881086500b0 R15: ffff888108650040 FS: 00007f5b2961a4c0(0000) GS:ffff88823bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055d7ed36fd18 CR3: 00000001482f6000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0xa3/0xc0 ? __warn+0xa5/0x1c0 ? refcount_warn_saturate+0xdf/0x1d0 ? report_bug+0x1fc/0x2d0 ? refcount_warn_saturate+0xdf/0x1d0 ? handle_bug+0xa1/0x110 ? exc_invalid_op+0x3c/0xb0 ? asm_exc_invalid_op+0x1f/0x30 ? __warn_printk+0xcc/0x140 ? __warn_printk+0xd5/0x140 ? refcount_warn_saturate+0xdf/0x1d0 get_net_ns+0xa4/0xc0 ? __pfx_get_net_ns+0x10/0x10 open_related_ns+0x5a/0x130 __tun_chr_ioctl+0x1616/0x2370 ? __sanitizer_cov_trace_switch+0x58/0xa0 ? __sanitizer_cov_trace_const_cmp2+0x1c/0x30 ? __pfx_tun_chr_ioctl+0x10/0x10 tun_chr_ioctl+0x2f/0x40 __x64_sys_ioctl+0x11b/0x160 x64_sys_call+0x1211/0x20d0 do_syscall_64+0x9e/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5b28f165d7 Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 8 RSP: 002b:00007ffc2b59c5e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5b28f165d7 RDX: 0000000000000000 RSI: 00000000000054e3 RDI: 0000000000000003 RBP: 00007ffc2b59c650 R08: 00007f5b291ed8c0 R09: 00007f5b2961a4c0 R10: 0000000029690010 R11: 0000000000000246 R12: 0000000000400730 R13: 00007ffc2b59cf40 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: kernel: panic_on_warn set ... This is trigger as below: ns0 ns1 tun_set_iff() //dev is tun0 tun->dev = dev //ip link set tun0 netns ns1 put_net() //ref is 0 __tun_chr_ioctl() //TUNGETDEVNETNS net = dev_net(tun->dev); open_related_ns(&net->ns, get_net_ns); //ns1 get_net_ns() get_net() //addition on 0 Use maybe_get_net() in get_net_ns in case net's ref is zero to fix this

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_dump_full_key() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in is_valid_oplock_break() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_is_valid_oplock_break() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.