In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_frag: fix stack OOB read while fragmenting IPv4 packets when 'act_mirred' tries to fragment IPv4 packets that had been previously re-assembled using 'act_ct', splats like the following can be observed on kernels built with KASAN: BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60 Read of size 1 at addr ffff888147009574 by task ping/947 CPU: 0 PID: 947 Comm: ping Not tainted 5.12.0-rc6+ #418 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: <IRQ> dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 ip_do_fragment+0x1b03/0x1f60 sch_fragment+0x4bf/0xe40 tcf_mirred_act+0xc3d/0x11a0 [act_mirred] tcf_action_exec+0x104/0x3e0 fl_classify+0x49a/0x5e0 [cls_flower] tcf_classify_ingress+0x18a/0x820 __netif_receive_skb_core+0xae7/0x3340 __netif_receive_skb_one_core+0xb6/0x1b0 process_backlog+0x1ef/0x6c0 __napi_poll+0xaa/0x500 net_rx_action+0x702/0xac0 __do_softirq+0x1e4/0x97f do_softirq+0x71/0x90 </IRQ> __local_bh_enable_ip+0xdb/0xf0 ip_finish_output2+0x760/0x2120 ip_do_fragment+0x15a5/0x1f60 __ip_finish_output+0x4c2/0xea0 ip_output+0x1ca/0x4d0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x1c4b/0x2d00 sock_sendmsg+0xdb/0x110 __sys_sendto+0x1d7/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f82e13853eb Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89 RSP: 002b:00007ffe01fad888 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00005571aac13700 RCX: 00007f82e13853eb RDX: 0000000000002330 RSI: 00005571aac13700 RDI: 0000000000000003 RBP: 0000000000002330 R08: 00005571aac10500 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe01faefb0 R13: 00007ffe01fad890 R14: 00007ffe01fad980 R15: 00005571aac0f0a0 The buggy address belongs to the page: page:000000001dff2e03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x147009 flags: 0x17ffffc0001000(reserved) raw: 0017ffffc0001000 ffffea00051c0248 ffffea00051c0248 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888147009400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888147009480: f1 f1 f1 f1 04 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 >ffff888147009500: 00 00 00 00 00 00 00 00 00 00 f2 f2 f2 f2 f2 f2 ^ ffff888147009580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888147009600: 00 00 00 00 00 00 00 00 00 00 00 00 00 f2 f2 f2 for IPv4 packets, sch_fragment() uses a temporary struct dst_entry. Then, in the following call graph: ip_do_fragment() ip_skb_dst_mtu() ip_dst_mtu_maybe_forward() ip_mtu_locked() the pointer to struct dst_entry is used as pointer to struct rtable: this turns the access to struct members like rt_mtu_locked into an OOB read in the stack. Fix this changing the temporary variable used for IPv4 packets in sch_fragment(), similarly to what is done for IPv6 few lines below.

In the Linux kernel, the following vulnerability has been resolved: net_sched: keep alloc_hash updated after hash allocation In commit 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex") I moved cp->hash calculation before the first tcindex_alloc_perfect_hash(), but cp->alloc_hash is left untouched. This difference could lead to another out of bound access. cp->alloc_hash should always be the size allocated, we should update it after this tcindex_alloc_perfect_hash().

In the Linux kernel, the following vulnerability has been resolved: mpls: add seqcount to protect the platform_label{,s} pair The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have an inconsistent view of platform_labels vs platform_label in case of a concurrent resize (resize_platform_label_table, under platform_mutex). This can lead to OOB accesses. This patch adds a seqcount, so that we get a consistent snapshot. Note that mpls_label_ok is also susceptible to this, so the check against RTA_DST in rtm_to_route_config, done outside platform_mutex, is not sufficient. This value gets passed to mpls_label_ok once more in both mpls_route_add and mpls_route_del, so there is no issue, but that additional check must not be removed.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix physical SQE bounds check for SQE_MIXED 128-byte ops When IORING_SETUP_SQE_MIXED is used without IORING_SETUP_NO_SQARRAY, the boundary check for 128-byte SQE operations in io_init_req() validated the logical SQ head position rather than the physical SQE index. The existing check: !(ctx->cached_sq_head & (ctx->sq_entries - 1)) ensures the logical position isn't at the end of the ring, which is correct for NO_SQARRAY rings where physical == logical. However, when sq_array is present, an unprivileged user can remap any logical position to an arbitrary physical index via sq_array. Setting sq_array[N] = sq_entries - 1 places a 128-byte operation at the last physical SQE slot, causing the 128-byte memcpy in io_uring_cmd_sqe_copy() to read 64 bytes past the end of the SQE array. Replace the cached_sq_head alignment check with a direct validation of the physical SQE index, which correctly handles both sq_array and NO_SQARRAY cases.

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS, This patch protects against invalid index out of bounds access to mw_sizes When invalid access print message to user that configuration is not valid.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie The current code checks 'i + 5 < in_len' at the end of the if statement. However, it accesses 'in_ie[i + 5]' before that check, which can lead to an out-of-bounds read. Move the length check to the beginning of the conditional to ensure the index is within bounds before accessing the array.

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak When processing Router Advertisements with user options the kernel builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct has three padding fields that are never zeroed and can leak kernel data The fix is simple, just zeroes the padding fields.

In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: reject zero-length fixed buffer import validate_fixed_range() admits buf_addr at the exact end of the registered region when len is zero, because the check uses strict greater-than (buf_end > imu->ubuf + imu->len). io_import_fixed() then computes offset == imu->len, which causes the bvec skip logic to advance past the last bio_vec entry and read bv_offset from out-of-bounds slab memory. Return early from io_import_fixed() when len is zero. A zero-length import has no data to transfer and should not walk the bvec array at all. BUG: KASAN: slab-out-of-bounds in io_import_reg_buf+0x697/0x7f0 Read of size 4 at addr ffff888002bcc254 by task poc/103 Call Trace: io_import_reg_buf+0x697/0x7f0 io_write_fixed+0xd9/0x250 __io_issue_sqe+0xad/0x710 io_issue_sqe+0x7d/0x1100 io_submit_sqes+0x86a/0x23c0 __do_sys_io_uring_enter+0xa98/0x1590 Allocated by task 103: The buggy address is located 12 bytes to the right of allocated 584-byte region [ffff888002bcc000, ffff888002bcc248)

In the Linux kernel, the following vulnerability has been resolved: hwmon: (tps53679) Fix array access with zero-length block read i2c_smbus_read_block_data() can return 0, indicating a zero-length read. When this happens, tps53679_identify_chip() accesses buf[ret - 1] which is buf[-1], reading one byte before the buffer on the stack. Fix by changing the check from "ret < 0" to "ret <= 0", treating a zero-length read as an error (-EIO), which prevents the out-of-bounds array access. Also fix a typo in the adjacent comment: "if present" instead of duplicate "if".

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Add bounds check on pat_index to prevent OOB kernel read in madvise When user provides a bogus pat_index value through the madvise IOCTL, the xe_pat_index_get_coh_mode() function performs an array access without validating bounds. This allows a malicious user to trigger an out-of-bounds kernel read from the xe->pat.table array. The vulnerability exists because the validation in madvise_args_are_sane() directly calls xe_pat_index_get_coh_mode(xe, args->pat_index.val) without first checking if pat_index is within [0, xe->pat.n_entries). Although xe_pat_index_get_coh_mode() has a WARN_ON to catch this in debug builds, it still performs the unsafe array access in production kernels. v2(Matthew Auld) - Using array_index_nospec() to mitigate spectre attacks when the value is used v3(Matthew Auld) - Put the declarations at the start of the block (cherry picked from commit 944a3329b05510d55c69c2ef455136e2fc02de29)

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop() pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as the to_offset argument on every iteration, including the last one where i == m->field_count - 1. This reads one element past the end of the stack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS] with NFT_PIPAPO_MAX_FIELDS == 16). Although pipapo_unmap() returns early when is_last is true without using the to_offset value, the argument is evaluated at the call site before the function body executes, making this a genuine out-of-bounds stack read confirmed by KASAN: BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables] Read of size 4 at addr ffff8000810e71a4 This frame has 1 object: [32, 160) 'rulemap' The buggy address is at offset 164 -- exactly 4 bytes past the end of the rulemap array. Pass 0 instead of rulemap[i + 1].n on the last iteration to avoid the out-of-bounds read.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: ensure names are nul-terminated Reject names that lack a \0 character before feeding them to functions that expect c-strings. Fixes tag is the most recent commit that needs this change.

In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers.

A use-after-free flaw was found in the __ext4_remount in fs/ext4/super.c in ext4 in the Linux kernel. This flaw allows a local user to cause an information leak problem while freeing the old quota file names before a potential failure, leading to a use-after-free.

An out-of-bounds read vulnerability was found in smb2_dump_detail in fs/smb/client/smb2ops.c in the Linux Kernel. This issue could allow a local attacker to crash the system or leak internal kernel information.

In the Linux kernel, the following vulnerability has been resolved: md-raid10: fix KASAN warning There's a KASAN warning in raid10_remove_disk when running the lvm test lvconvert-raid-reshape.sh. We fix this warning by verifying that the value "number" is valid. BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10] Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682 CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x45/0x57a ? __lock_text_start+0x18/0x18 ? raid10_remove_disk+0x61/0x2a0 [raid10] kasan_report+0xa8/0xe0 ? raid10_remove_disk+0x61/0x2a0 [raid10] raid10_remove_disk+0x61/0x2a0 [raid10] Buffer I/O error on dev dm-76, logical block 15344, async page read ? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0 remove_and_add_spares+0x367/0x8a0 [md_mod] ? super_written+0x1c0/0x1c0 [md_mod] ? mutex_trylock+0xac/0x120 ? _raw_spin_lock+0x72/0xc0 ? _raw_spin_lock_bh+0xc0/0xc0 md_check_recovery+0x848/0x960 [md_mod] raid10d+0xcf/0x3360 [raid10] ? sched_clock_cpu+0x185/0x1a0 ? rb_erase+0x4d4/0x620 ? var_wake_function+0xe0/0xe0 ? psi_group_change+0x411/0x500 ? preempt_count_sub+0xf/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? raid10_sync_request+0x36c0/0x36c0 [raid10] ? preempt_count_sub+0xf/0xc0 ? _raw_spin_unlock_irqrestore+0x19/0x40 ? del_timer_sync+0xa9/0x100 ? try_to_del_timer_sync+0xc0/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? _raw_spin_unlock_irq+0x11/0x24 ? __list_del_entry_valid+0x68/0xa0 ? finish_wait+0xa3/0x100 md_thread+0x161/0x260 [md_mod] ? unregister_md_personality+0xa0/0xa0 [md_mod] ? _raw_spin_lock_irqsave+0x78/0xc0 ? prepare_to_wait_event+0x2c0/0x2c0 ? unregister_md_personality+0xa0/0xa0 [md_mod] kthread+0x148/0x180 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 124495: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x80/0xa0 setup_conf+0x140/0x5c0 [raid10] raid10_run+0x4cd/0x740 [raid10] md_run+0x6f9/0x1300 [md_mod] raid_ctr+0x2531/0x4ac0 [dm_raid] dm_table_add_target+0x2b0/0x620 [dm_mod] table_load+0x1c8/0x400 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 L __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff889108f3d200 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff889108f3d200, ffff889108f3d300) The buggy address belongs to the physical page: page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=2) raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff889108f3d280: 00 00 ---truncated---

An out-of-bounds read vulnerability was found in smbCalcSize in fs/smb/client/netmisc.c in the Linux Kernel. This issue could allow a local attacker to crash the system or leak internal kernel information.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: use static NDP16 location in URB Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately.

In the Linux kernel, the following vulnerability has been resolved: um: Fix out-of-bounds read in LDT setup syscall_stub_data() expects the data_count parameter to be the number of longs, not bytes. ================================================================== BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0 Read of size 128 at addr 000000006411f6f0 by task swapper/1 CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18 Call Trace: show_stack.cold+0x166/0x2a7 __dump_stack+0x3a/0x43 dump_stack_lvl+0x1f/0x27 print_report.cold+0xdb/0xf81 kasan_report+0x119/0x1f0 kasan_check_range+0x3a3/0x440 memcpy+0x52/0x140 syscall_stub_data+0x70/0xe0 write_ldt_entry+0xac/0x190 init_new_ldt+0x515/0x960 init_new_context+0x2c4/0x4d0 mm_init.constprop.0+0x5ed/0x760 mm_alloc+0x118/0x170 0x60033f48 do_one_initcall+0x1d7/0x860 0x60003e7b kernel_init+0x6e/0x3d4 new_thread_handler+0x1e7/0x2c0 The buggy address belongs to stack of task swapper/1 and is located at offset 64 in frame: init_new_ldt+0x0/0x960 This frame has 2 objects: [32, 40) 'addr' [64, 80) 'desc' ==================================================================

In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix hang in usb_kill_urb by adding memory barriers The syzbot fuzzer has identified a bug in which processes hang waiting for usb_kill_urb() to return. It turns out the issue is not unlinking the URB; that works just fine. Rather, the problem arises when the wakeup notification that the URB has completed is not received. The reason is memory-access ordering on SMP systems. In outline form, usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on different CPUs perform the following actions: CPU 0 CPU 1 ---------------------------- --------------------------------- usb_kill_urb(): __usb_hcd_giveback_urb(): ... ... atomic_inc(&urb->reject); atomic_dec(&urb->use_count); ... ... wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0); if (atomic_read(&urb->reject)) wake_up(&usb_kill_urb_queue); Confining your attention to urb->reject and urb->use_count, you can see that the overall pattern of accesses on CPU 0 is: write urb->reject, then read urb->use_count; whereas the overall pattern of accesses on CPU 1 is: write urb->use_count, then read urb->reject. This pattern is referred to in memory-model circles as SB (for "Store Buffering"), and it is well known that without suitable enforcement of the desired order of accesses -- in the form of memory barriers -- it is entirely possible for one or both CPUs to execute their reads ahead of their writes. The end result will be that sometimes CPU 0 sees the old un-decremented value of urb->use_count while CPU 1 sees the old un-incremented value of urb->reject. Consequently CPU 0 ends up on the wait queue and never gets woken up, leading to the observed hang in usb_kill_urb(). The same pattern of accesses occurs in usb_poison_urb() and the failure pathway of usb_hcd_submit_urb(). The problem is fixed by adding suitable memory barriers. To provide proper memory-access ordering in the SB pattern, a full barrier is required on both CPUs. The atomic_inc() and atomic_dec() accesses themselves don't provide any memory ordering, but since they are present, we can use the optimized smp_mb__after_atomic() memory barrier in the various routines to obtain the desired effect. This patch adds the necessary memory barriers.

In the Linux kernel, the following vulnerability has been resolved: bpf: Use VM_MAP instead of VM_ALLOC for ringbuf After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages after mapping"), non-VM_ALLOC mappings will be marked as accessible in __get_vm_area_node() when KASAN is enabled. But now the flag for ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access after vmap() returns. Because the ringbuf area is created by mapping allocated pages, so use VM_MAP instead. After the change, info in /proc/vmallocinfo also changes from [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user to [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user

In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi_parser: add check to avoid out of bound access There is a possibility that init_codecs is invoked multiple times during manipulated payload from video firmware. In such case, if codecs_count can get incremented to value more than MAX_CODEC_NUM, there can be OOB access. Reset the count so that it always starts from beginning.

In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi_parser: refactor hfi packet parsing logic words_count denotes the number of words in total payload, while data points to payload of various property within it. When words_count reaches last word, data can access memory beyond the total payload. This can lead to OOB access. With this patch, the utility api for handling individual properties now returns the size of data consumed. Accordingly remaining bytes are calculated before parsing the payload, thereby eliminates the OOB access possibilities.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bound accesses [WHAT & HOW] hpo_stream_to_link_encoder_mapping has size MAX_HPO_DP2_ENCODERS(=4), but location can have size up to 6. As a result, it is necessary to check location against MAX_HPO_DP2_ENCODERS. Similiarly, disp_cfg_stream_location can be used as an array index which should be 0..5, so the ASSERT's conditions should be less without equal.

In the Linux kernel, the following vulnerability has been resolved: sched: sch_cake: add bounds checks to host bulk flow fairness counts Even though we fixed a logic error in the commit cited below, syzbot still managed to trigger an underflow of the per-host bulk flow counters, leading to an out of bounds memory access. To avoid any such logic errors causing out of bounds memory accesses, this commit factors out all accesses to the per-host bulk flow counters to a series of helpers that perform bounds-checking before any increments and decrements. This also has the benefit of improving readability by moving the conditional checks for the flow mode into these helpers, instead of having them spread out throughout the code (which was the cause of the original logic error). As part of this change, the flow quantum calculation is consolidated into a helper function, which means that the dithering applied to the ost load scaling is now applied both in the DRR rotation and when a sparse flow's quantum is first initiated. The only user-visible effect of this is that the maximum packet size that can be sent while a flow stays sparse will now vary with +/- one byte in some cases. This should not make a noticeable difference in practice, and thus it's not worth complicating the code to preserve the old behaviour.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: fix kasan out-of-bounds warning in sja1105_table_delete_entry() There are actually 2 problems: - deleting the last element doesn't require the memmove of elements [i + 1, end) over it. Actually, element i+1 is out of bounds. - The memmove itself should move size - i - 1 elements, because the last element is out of bounds. The out-of-bounds element still remains out of bounds after being accessed, so the problem is only that we touch it, not that it becomes in active use. But I suppose it can lead to issues if the out-of-bounds element is part of an unmapped page.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix array bounds error with may_goto may_goto uses an additional 8 bytes on the stack, which causes the interpreters[] array to go out of bounds when calculating index by stack_size. 1. If a BPF program is rewritten, re-evaluate the stack size. For non-JIT cases, reject loading directly. 2. For non-JIT cases, calculating interpreters[idx] may still cause out-of-bounds array access, and just warn about it. 3. For jit_requested cases, the execution of bpf_func also needs to be warned. So move the definition of function __bpf_prog_ret0_warn out of the macro definition CONFIG_BPF_JIT_ALWAYS_ON.

In the Linux kernel, the following vulnerability has been resolved: ice: validate queue quanta parameters to prevent OOB access Add queue wraparound prevention in quanta configuration. Ensure end_qid does not overflow by validating start_qid and num_queues.

In the Linux kernel, the following vulnerability has been resolved: iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic() When performing an iSCSI boot using IPv6, iscsistart still reads the /sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix length is 64, this causes the shift exponent to become negative, triggering a UBSAN warning. As the concept of a subnet mask does not apply to IPv6, the value is set to ~0 to suppress the warning message.

In the Linux kernel, the following vulnerability has been resolved: drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl In the "pmcmd_ioctl" function, three memory objects allocated by kmalloc are initialized by "hcall_get_cpu_state", which are then copied to user space. The initializer is indeed implemented in "acrn_hypercall2" (arch/x86/include/asm/acrn.h). There is a risk of information leakage due to uninitialized bytes.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix DPE OoB read Fix an out-of-bounds DPE read, limit the number of processed DPEs to the amount that fits into the fixed-size NDP16 header.

In the Linux kernel, the following vulnerability has been resolved: mm/compaction: fix UBSAN shift-out-of-bounds warning syzkaller reported a UBSAN shift-out-of-bounds warning of (1UL << order) in isolate_freepages_block(). The bogus compound_order can be any value because it is union with flags. Add back the MAX_PAGE_ORDER check to fix the warning.

In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Avoid out of bounds access when parsing _CPC data If the NumEntries field in the _CPC return package is less than 2, do not attempt to access the "Revision" element of that package, because it may not be present then. BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/

In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: fix out-of-range access of vnic_info array The bnxt_queue_{start | stop}() access vnic_info as much as allocated, which indicates bp->nr_vnics. So, it should not reach bp->vnic_info[bp->nr_vnics].

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: limit printed string from FW file There's no guarantee here that the file is always with a NUL-termination, so reading the string may read beyond the end of the TLV. If that's the last TLV in the file, it can perhaps even read beyond the end of the file buffer. Fix that by limiting the print format to the size of the buffer we have.

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Use kernel helpers for hex dumps Previously, when the driver was printing hex dumps, the buffer was cast to an 8 byte long and printed using string formatters. If the buffer size was not a multiple of 8 then a read buffer overflow was possible. Therefore, create a new ibmvnic function that loops over a buffer and calls hex_dump_to_buffer instead. This patch address KASAN reports like the one below: ibmvnic 30000003 env3: Login Buffer: ibmvnic 30000003 env3: 01000000af000000 <...> ibmvnic 30000003 env3: 2e6d62692e736261 ibmvnic 30000003 env3: 65050003006d6f63 ================================================================== BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic] Read of size 8 at addr c0000001331a9aa8 by task ip/17681 <...> Allocated by task 17681: <...> ibmvnic_login+0x2f0/0xffc [ibmvnic] ibmvnic_open+0x148/0x308 [ibmvnic] __dev_open+0x1ac/0x304 <...> The buggy address is located 168 bytes inside of allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf) <...> ================================================================= ibmvnic 30000003 env3: 000000000033766e

In the Linux kernel, the following vulnerability has been resolved: LoongArch: csum: Fix OoB access in IP checksum code for negative lengths Commit 69e3a6aa6be2 ("LoongArch: Add checksum optimization for 64-bit system") would cause an undefined shift and an out-of-bounds read. Commit 8bd795fedb84 ("arm64: csum: Fix OoB access in IP checksum code for negative lengths") fixes the same issue on ARM64.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix overflow in dacloffset bounds check The dacloffset field was originally typed as int and used in an unchecked addition, which could overflow and bypass the existing bounds check in both smb_check_perm_dacl() and smb_inherit_dacl(). This could result in out-of-bounds memory access and a kernel crash when dereferencing the DACL pointer. This patch converts dacloffset to unsigned int and uses check_add_overflow() to validate access to the DACL.

In the Linux kernel, the following vulnerability has been resolved: orangefs: fix a oob in orangefs_debug_write I got a syzbot report: slab-out-of-bounds Read in orangefs_debug_write... several people suggested fixes, I tested Al Viro's suggestion and made this patch.

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut Number of MW LUTs depends on NTB configuration and can be set to zero, in such scenario rounddown_pow_of_two will cause undefined behaviour and should not be performed. This patch ensures that rounddown_pow_of_two is called on valid value.

In the Linux kernel, the following vulnerability has been resolved: mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate() Although it is guided that `#mbox-cells` must be at least 1, there are many instances of `#mbox-cells = <0>;` in the device tree. If that is the case and the corresponding mailbox controller does not provide `fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will be used by default and out-of-bounds accesses could occur due to lack of bounds check in that function.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table() nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label inside the for loop body. When the "last" helper saved in cb->args[1] is deleted between dump rounds, every entry fails the (cur != last) check, so cb->args[1] is never cleared. The for loop finishes with cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back into the loop body bypassing the bounds check, causing an 8-byte out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize]. The 'goto restart' block was meant to re-traverse the current bucket when "last" is no longer found, but it was placed after the for loop instead of inside it. Move the block into the for loop body so that the restart only occurs while cb->args[0] is still within bounds. BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0 Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131 Call Trace: nfnl_cthelper_dump_table+0x9f/0x1b0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 sock_recvmsg+0xde/0xf0 __sys_recvfrom+0x150/0x200 __x64_sys_recvfrom+0x76/0x90 do_syscall_64+0xc3/0x6e0 Allocated by task 1: __kvmalloc_node_noprof+0x21b/0x700 nf_ct_alloc_hashtable+0x65/0xd0 nf_conntrack_helper_init+0x21/0x60 nf_conntrack_init_start+0x18d/0x300 nf_conntrack_standalone_init+0x12/0xc0

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set dev->online_queues is a count incremented in nvme_init_queue. Thus, valid indices are 0 through dev->online_queues − 1. This patch fixes the loop condition to ensure the index stays within the valid range. Index 0 is excluded because it is the admin queue. KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 Read of size 2 at addr ffff88800592a574 by task kworker/u8:5/74 CPU: 0 UID: 0 PID: 74 Comm: kworker/u8:5 Not tainted 6.19.0-dirty #10 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: nvme-reset-wq nvme_reset_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xea/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x5d0 mm/kasan/report.c:482 kasan_report+0xdc/0x110 mm/kasan/report.c:595 __asan_report_load2_noabort+0x18/0x20 mm/kasan/report_generic.c:379 nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 nvme_reset_work+0x36b/0x8c0 drivers/nvme/host/pci.c:3252 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> Allocated by task 34 on cpu 1 at 4.241550s: kasan_save_stack+0x2c/0x60 mm/kasan/common.c:57 kasan_save_track+0x1c/0x70 mm/kasan/common.c:78 kasan_save_alloc_info+0x3c/0x50 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xb5/0xc0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5657 [inline] __kmalloc_node_noprof+0x2bf/0x8d0 mm/slub.c:5663 kmalloc_array_node_noprof include/linux/slab.h:1075 [inline] nvme_pci_alloc_dev drivers/nvme/host/pci.c:3479 [inline] nvme_probe+0x2f1/0x1820 drivers/nvme/host/pci.c:3534 local_pci_probe+0xef/0x1c0 drivers/pci/pci-driver.c:324 pci_call_probe drivers/pci/pci-driver.c:392 [inline] __pci_device_probe drivers/pci/pci-driver.c:417 [inline] pci_device_probe+0x743/0x920 drivers/pci/pci-driver.c:451 call_driver_probe drivers/base/dd.c:583 [inline] really_probe+0x29b/0xb70 drivers/base/dd.c:661 __driver_probe_device+0x3b0/0x4a0 drivers/base/dd.c:803 driver_probe_device+0x56/0x1f0 drivers/base/dd.c:833 __driver_attach_async_helper+0x155/0x340 drivers/base/dd.c:1159 async_run_entry_fn+0xa6/0x4b0 kernel/async.c:129 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 The buggy address belongs to the object at ffff88800592a000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 244 bytes to the right of allocated 1152-byte region [ffff88800592a000, ffff88800592a480) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5928 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0xfffffc0000040(head|node=0|zone=1|lastcpupid=0x1fffff) page_type: f5(slab) raw: 000fffffc0000040 ffff888001042000 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 000fffffc0000040 ffff888001042000 00000 ---truncated---

Linux disk/nic frontends data leaks T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Linux Block and Network PV device frontends don't zero memory regions before sharing them with the backend (CVE-2022-26365, CVE-2022-33740). Additionally the granularity of the grant table doesn't allow sharing less than a 4K page, leading to unrelated data residing in the same 4K page as data shared with a backend being accessible by such backend (CVE-2022-33741, CVE-2022-33742).

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix kernel crash due to null io->bio We should return when io->bio is null before doing anything. Otherwise, panic. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:__submit_merged_write_cond+0x164/0x240 [f2fs] Call Trace: <TASK> f2fs_submit_merged_write+0x1d/0x30 [f2fs] commit_checkpoint+0x110/0x1e0 [f2fs] f2fs_write_checkpoint+0x9f7/0xf00 [f2fs] ? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs] __checkpoint_and_complete_reqs+0x84/0x190 [f2fs] ? preempt_count_add+0x82/0xc0 ? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs] issue_checkpoint_thread+0x4c/0xf0 [f2fs] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0xff/0x130 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK>

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one Eric Dumazet says: nf_conntrack_dccp_packet() has an unique: dh = skb_header_pointer(skb, dataoff, sizeof(_dh), &_dh); And nothing more is 'pulled' from the packet, depending on the content. dh->dccph_doff, and/or dh->dccph_x ...) So dccp_ack_seq() is happily reading stuff past the _dh buffer. BUG: KASAN: stack-out-of-bounds in nf_conntrack_dccp_packet+0x1134/0x11c0 Read of size 4 at addr ffff000128f66e0c by task syz-executor.2/29371 [..] Fix this by increasing the stack buffer to also include room for the extra sequence numbers and all the known dccp packet type headers, then pull again after the initial validation of the basic header. While at it, mark packets invalid that lack 48bit sequence bit but where RFC says the type MUST use them. Compile tested only. v2: first skb_header_pointer() now needs to adjust the size to only pull the generic header. (Eric) Heads-up: I intend to remove dccp conntrack support later this year.

Linux disk/nic frontends data leaks T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Linux Block and Network PV device frontends don't zero memory regions before sharing them with the backend (CVE-2022-26365, CVE-2022-33740). Additionally the granularity of the grant table doesn't allow sharing less than a 4K page, leading to unrelated data residing in the same 4K page as data shared with a backend being accessible by such backend (CVE-2022-33741, CVE-2022-33742).

In the Linux kernel, the following vulnerability has been resolved: md/raid10: check slab-out-of-bounds in md_bitmap_get_counter If we write a large number to md/bitmap_set_bits, md_bitmap_checkpage() will return -EINVAL because 'page >= bitmap->pages', but the return value was not checked immediately in md_bitmap_get_counter() in order to set *blocks value and slab-out-of-bounds occurs. Move check of 'page >= bitmap->pages' to md_bitmap_get_counter() and return directly if true.

In the Linux kernel, the following vulnerability has been resolved: ntfs: Fix panic about slab-out-of-bounds caused by ntfs_listxattr() Here is a BUG report from syzbot: BUG: KASAN: slab-out-of-bounds in ntfs_list_ea fs/ntfs3/xattr.c:191 [inline] BUG: KASAN: slab-out-of-bounds in ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710 Read of size 1 at addr ffff888021acaf3d by task syz-executor128/3632 Call Trace: ntfs_list_ea fs/ntfs3/xattr.c:191 [inline] ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710 vfs_listxattr fs/xattr.c:457 [inline] listxattr+0x293/0x2d0 fs/xattr.c:804 Fix the logic of ea_all iteration. When the ea->name_len is 0, return immediately, or Add2Ptr() would visit invalid memory in the next loop. [almaz.alexandrovich@paragon-software.com: lines of the patch have changed]

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: drop short frames While technically some control frames like ACK are shorter and end after Address 1, such frames shouldn't be forwarded through wmediumd or similar userspace, so require the full 3-address header to avoid accessing invalid memory if shorter frames are passed in.