Grandstream GWN7000 firmware version 1.0.9.4 and below allows authenticated remote users to modify the system's crontab via undocumented API. An attacker can use this functionality to execute arbitrary OS commands on the router.

The Symantec Reporter CLI 10.1 prior to 10.1.5.6 and 10.2 prior to 10.2.1.8 is susceptible to an OS command injection vulnerability. An authenticated malicious administrator with Enable mode access can execute arbitrary OS commands with elevated system privileges.

Dell EMC OpenManage Enterprise-Modular (OME-M) versions prior to 1.10.00 contain a command injection vulnerability. A remote authenticated malicious user with high privileges could potentially exploit the vulnerability to execute arbitrary shell commands on the affected system.

Cellopoint CelloOS v4.1.10 Build 20190922 does not validate URL inputted properly. With the cookie of the system administrator, attackers can inject and remotely execute arbitrary command to manipulate the system.

RSA Archer, versions prior to 6.7 P3 (6.7.0.3), contain a command injection vulnerability. AN authenticated malicious user with administrator privileges could potentially exploit this vulnerability to execute arbitrary commands on the system where the vulnerable application is deployed.

OS command injection in user.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands as root via the "name" POST parameter.

OS command injection in group.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands as root by modifying the "name" POST parameter.

Dell EMC Integrated Data Protection Appliance versions 2.0, 2.1, 2.2, 2.3, 2.4 contain a command injection vulnerability in the ACM component. A remote authenticated malicious user with root privileges could inject parameters in the ACM component APIs that could lead to manipulation of passwords and execution of malicious commands on ACM component.

A command injection vulnerability in PWS in Imperva SecureSphere 13.0.0.10 and 13.1.0.10 Gateway allows an attacker with authenticated access to execute arbitrary OS commands on a vulnerable installation.

Dell EMC Data Protection Advisor 6.4, 6.5 and 18.1 contain an OS command injection vulnerability. A remote authenticated malicious user may exploit this vulnerability to execute arbitrary commands on the affected system.

The Patient Portal of OpenEMR 5.0.2.1 is affected by a Command Injection vulnerability in /interface/main/backup.php. To exploit the vulnerability, an authenticated attacker can send a POST request that executes arbitrary OS commands via shell metacharacters.

OS command injection in user.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands as root via the "secret_key" URL parameter.

OCS Inventory 2.4.1 is prone to a remote command-execution vulnerability. Specifically, this issue occurs because the content of the ipdiscover_analyser rzo GET parameter is concatenated to a string used in an exec() call in the PHP code. Authentication is needed in order to exploit this vulnerability.

IBM Spectrum Scale and IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 175419.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow a remote attacker to execute arbitrary commands on the system in the context of root user, caused by improper validation of user-supplied input. IBM X-Force ID: 174966.

LINK-NET LW-N605R devices with firmware 12.20.2.1486 allow Remote Code Execution via shell metacharacters in the HOST field of the ping feature at adm/systools.asp. Authentication is needed but the default password of admin for the admin account may be used in some cases.

IBM Spectrum Scale and IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 175418.

An OS command injection vulnerability in the web administration component of Micro Focus Secure Messaging Gateway (SMG) allows a remote attacker authenticated as a privileged user to execute arbitrary OS commands on the SMG server. This can be exploited in conjunction with CVE-2018-12464 to achieve unauthenticated remote code execution. Affects Micro Focus Secure Messaging Gateway versions prior to 471. It does not affect previous versions of the product that used GWAVA product name (i.e. GWAVA 6.5).

The network diagnostic function (ping) in the Yeahlink Ultra-elegant IP Phone SIP-T41P (firmware 66.83.0.35) allows a remote authenticated attacker to trigger OS commands or open a reverse shell via command injection.

NETGEAR NMS300 devices before 1.6.0.27 are affected by command injection by an authenticated user.

A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS.

D-Link DIR-846 devices with firmware 100.26 allow remote attackers to execute arbitrary code as root via a SetNetworkTomographySettings request by leveraging admin access.

A Command Injection issue in the traceroute feature on TP-Link TL-WR841N V13 (JP) with firmware versions prior to 201216 allows authenticated users to execute arbitrary code as root via shell metacharacters, a different vulnerability than CVE-2018-12577.

Arbitrary command execution can occur in Webmin through 1.962. Any user authorized for the Package Updates module can execute arbitrary commands with root privileges via vectors involving %0A and %0C. NOTE: this issue exists because of an incomplete fix for CVE-2019-12840.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Series Routers could allow an authenticated, remote attacker to inject arbitrary shell commands that are executed by an affected device. The vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary shell commands or scripts with root privileges on the affected device.

A low-privileged remote attacker could exploit the vulnerability and inject additional system commands via file system libraries which could give the attacker full control of the device.

Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote authenticated users to execute arbitrary commands via shell metacharacters in a filename to the upload_settings.cgi page.

cups-filters contains backends, filters, and other software required to get the cups printing service working on operating systems other than macos. If you use the Backend Error Handler (beh) to create an accessible network printer, this security vulnerability can cause remote code execution. `beh.c` contains the line `retval = system(cmdline) >> 8;` which calls the `system` command with the operand `cmdline`. `cmdline` contains multiple user controlled, unsanitized values. As a result an attacker with network access to the hosted print server can exploit this vulnerability to inject system commands which are executed in the context of the running server. This issue has been addressed in commit `8f2740357` and is expected to be bundled in the next release. Users are advised to upgrade when possible and to restrict access to network printers in the meantime.

A vulnerability in the web UI of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary code and execute arbitrary commands at the underlying operating system level. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands at the underlying operating system level.

D-Link DSL-3782 v1.03 and below was discovered to contain a command injection vulnerability via the function byte_4C0160.

Ubiquiti Networks EdgeSwitch version 1.7.3 and prior suffer from an improperly neutralized element in an OS command due to lack of protection on the admin CLI, leading to code execution and privilege escalation greater than administrators themselves are allowed. An attacker with access to an admin account could escape the restricted CLI and execute arbitrary shell instructions.

A vulnerability in the software upgrade process of Cisco TelePresence Collaboration Endpoint Software and Cisco RoomOS Software could allow an authenticated, remote attacker to modify the filesystem to cause a denial of service (DoS) or gain privileged access to the root filesystem. The vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by sending requests with malformed parameters to the system using the console, Secure Shell (SSH), or web API. A successful exploit could allow the attacker to modify the device configuration or cause a DoS.

An issue was discovered in the Manage Plugins page in Nagios XI before 5.8.0. Because the line-ending conversion feature is mishandled during a plugin upload, a remote, authenticated admin user can execute operating-system commands.

Belkin LINKSYS RE6500 devices before 1.0.11.001 allow remote authenticated users to execute arbitrary commands via goform/systemCommand?command= in conjunction with the goform/pingstart program.

A vulnerability in the Device Manager application of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to inject arbitrary commands on the affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted arguments to a specific field within the application. A successful exploit could allow the attacker to run commands as the administrator on the DCNM.

An OS command injection vulnerability in FortiDeceptor 3.1.0, 3.0.1, 3.0.0 may allow a remote authenticated attacker to execute arbitrary commands on the system by exploiting a command injection vulnerability on the Customization page.

A command injection vulnerability in ModifyVLANItem of Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2 could allow an authenticated, remote attacker to send specially crafted HTTP messages and execute arbitrary OS commands with elevated privileges.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

The admin web interface in Cisco AsyncOS 8.x before 8.0.8-113, 8.1.x and 8.5.x before 8.5.3-051, 8.6.x and 8.7.x before 8.7.0-171-LD, and 8.8.x before 8.8.0-085 on Web Security Appliance (WSA) devices allows remote authenticated users to obtain root privileges via crafted certificate-generation arguments, aka Bug ID CSCus83445.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition.

Liferay Portal Server tested on 7.3.5 GA6, 7.2.0 GA1 is affected by OS Command Injection. An administrator user can inject commands through the Gogo Shell module to execute any OS command on the Liferay Portal Sever. NOTE: The developer disputes this as a vulnerability since it is a feature for administrators to access and execute commands in Gogo Shell and therefore not a design fla

The Bosch Ethernet switch PRA-ES8P2S with software version 1.01.05 and earlier was found to be vulnerable to command injection through its diagnostics web interface. This allows execution of shell commands.

A command injection vulnerability in AddVLANItem of Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2 could allow an authenticated, remote attacker to send specially crafted HTTP messages and execute arbitrary OS commands with elevated privileges.

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can forge an HTTP request to inject operating system commands that can be executed on the device with higher privileges, aka remote code execution.

System command injection in ajaxdata.php in TerraMaster TOS version 3.1.03 allows attackers to execute system commands during group creation via the "groupname" parameter.

Maxum Rumpus 8.2.13 and 8.2.14 is affected by a command injection vulnerability. The web administration contains functionality in which administrators are able to manage users. The edit users form contains a parameter vulnerable to command injection due to insufficient validation.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.