FitNesse all releases allows a remote authenticated attacker to execute arbitrary OS commands. Note: A contributor of FitNesse has claimed that this is not a vulnerability but a product specification and this is currently under further investigation.

A vulnerability was found in Tenda AC15 15.03.05.18/15.03.20_multi. It has been classified as critical. This affects the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-257775. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The api/ZRIGMP/set_MLD_PROXY interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the MLD_PROXY_WAN_CONNECT parameter.

The api/zrDm/set_ZRElink interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the bssaddr, abiaddr, devtoken, devid, elinksync, or elink_proc_enable parameter.

An issue was identified in GitLab CE/EE affecting all versions from 1.0 prior to 15.8.5, 15.9 prior to 15.9.4, and 15.10 prior to 15.10.1 where non-printable characters gets copied from clipboard, allowing unexpected commands to be executed on victim machine.

A vulnerability was found in DolphinPHP up to 1.5.1. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file common.php of the component Incomplete Fix CVE-2021-46097. The manipulation of the argument id leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-221551.

A vulnerability was found in liferea. It has been rated as critical. Affected by this issue is the function update_job_run of the file src/update.c of the component Feed Enrichment. The manipulation of the argument source with the input |date >/tmp/bad-item-link.txt leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The name of the patch is 8d8b5b963fa64c7a2122d1bbfbb0bed46e813e59. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-222848.

A command injection vulnerability has been reported to affect QNAP NAS running legacy versions of QTS. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. This issue affects: QNAP Systems Inc. QTS versions prior to 4.3.6.1663 Build 20210504; versions prior to 4.3.3.1624 Build 20210416. This issue does not affect: QNAP Systems Inc. QTS 4.5.3. QNAP Systems Inc. QuTS hero h4.5.3. QNAP Systems Inc. QuTScloud c4.5.5.

Command Injection in TOTOLINK X5000R router with firmware v9.1.0u.6118_B20201102, and TOTOLINK A720R router with firmware v4.1.5cu.470_B20200911 allows remote attackers to execute arbitrary OS commands by sending a modified HTTP request. This occurs because the function executes glibc's system function with untrusted input. In the function, "ip" parameter is directly passed to the attacker, allowing them to control the "ip" field to attack the OS.

Yealink Device Management (DM) 3.6.0.20 allows command injection as root via the /sm/api/v1/firewall/zone/services URI, without authentication.

Improper Neutralization of Special Elements used in an OS Command vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary OS command with the root privilege via the internet.

Command Injection in Tenda G0 routers with firmware versions v15.11.0.6(9039)_CN and v15.11.0.5(5876)_CN , and Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted action/setDebugCfg request. This occurs because the "formSetDebugCfg" function executes glibc's system function with untrusted input.

rakibtg Docker Dashboard before 2021-02-28 allows command injection in backend/utilities/terminal.js via shell metacharacters in the command parameter of an API request. NOTE: this is NOT a Docker, Inc. product.

A command injection vulnerabilities have been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. This issue affects: QNAP Systems Inc. QTS versions prior to 4.5.1.1540 build 20210107. QNAP Systems Inc. QuTS hero versions prior to h4.5.1.1582 build 20210217.

A vulnerability has been found in Netgear WNDR3700v2 1.0.1.14 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221152.

A vulnerability has been found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6 and classified as critical. Affected by this vulnerability is an unknown functionality of the component OSPF Handler. The manipulation of the argument area leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The associated identifier of this vulnerability is VDB-223303. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

Mesa Labs AmegaView version 3.0 is vulnerable to a command injection, which may allow an attacker to remotely execute arbitrary code.

Sublime Text 4 was discovered to contain a command injection vulnerability via the New Build System module. NOTE: multiple third parties report that this is intended behavior.

Several high privileged APIs on the Vizio P65-F1 6.0.31.4-2 and E50x-E1 10.0.31.4-2 Smart TVs do not enforce access controls, allowing an unauthenticated threat actor to access privileged functionality, leading to OS command execution. The specific attack methodology is a file upload.

Command Injection in TOTOLINK X5000R router with firmware v9.1.0u.6118_B20201102, and TOTOLINK A720R router with firmware v4.1.5cu.470_B20200911 allows remote attackers to execute arbitrary OS commands by sending a modified HTTP request. This occurs because the function executes glibc's system function with untrusted input. In the function, "command" parameter is directly passed to the attacker, allowing them to control the "command" field to attack the OS.

Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the wps_ap_ssid5g parameter

A vulnerability in lack of validation of user-supplied parameters pass to XML-RPC calls on SonicWall Global Management System (GMS) virtual appliance's, allow remote user to execute arbitrary code. This vulnerability affected GMS version 8.1 and earlier.

Netis WF2780 2.3.40404 and WF2411 1.1.29629 devices allow Shell Metacharacter Injection into the ping command, leading to remote code execution.

The gitlog function in src/index.ts in gitlog before 4.0.4 has a command injection vulnerability.

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/addRouting route. This could lead to Command Injection via Shell Metacharacters.

Multiple command injections and stack-based buffer overflows vulnerabilities in the SubNet_handler_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

In VembuBDR before 4.2.0.1 and VembuOffsiteDR before 4.2.0.1 installed on Windows, the http API located at /consumerweb/secure/download.php. Using this command argument an unauthenticated attacker can execute arbitrary OS commands with SYSTEM privileges.

Command injection and multiple stack-based buffer overflows vulnerabilities in the Login_handler_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

Command Injection in GitHub repository thorsten/phpmyfaq prior to 3.1.11.

An OS command injection was found in SecuwaySSL, when special characters injection on execute command with runCommand arguments.

The eslint-fixer package through 0.1.5 for Node.js allows command injection via shell metacharacters to the fix function. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. The ozum/eslint-fixer GitHub repository has been intentionally deleted

Command injection and stack-based buffer overflow vulnerabilities in the KillDupUsr_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

Yealink Meeting Server before v26.0.0.66 was discovered to contain an OS command injection vulnerability via the file upload interface.

Command injection vulnerability in China Mobile An Lianbao WF-1 1.01 via the 'ip' parameter with a POST request to /api/ZRQos/set_online_client.

EPrints 3.4.2 allows remote attackers to execute OS commands via crafted LaTeX input to a cgi/cal?year= URI.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the pppoePass parameter in the setIpv6Cfg function.

Command injection and multiple stack-based buffer overflows vulnerabilities in the modifyUserb_func function of spx_restservice allow an authenticated attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

In multiple products of WAGO a vulnerability allows an unauthenticated, remote attacker to create new users and change the device configuration which can result in unintended behaviour, Denial of Service and full system compromise.

The samba-client package before 4.0.0 for Node.js allows command injection because of the use of process.exec.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the enable parameter in the setWiFiScheduleCfg function.

An issue in idocv v.14.1.3_20231228 allows a remote attacker to execute arbitrary code and obtain sensitive information via a crafted script.

Zentao v18.0 to v18.10 was discovered to contain a remote code execution (RCE) vulnerability via the checkConnection method of /app/zentao/module/repo/model.php.

A command injection vulnerability exists in D-Link DAP-1650 devices when handling UPnP SUBSCRIBE messages. An unauthenticated attacker can exploit this vulnerability to gain command execution on the device as root.

A vulnerability in the parisneo/lollms-webui version 9.3 allows attackers to bypass intended access restrictions and execute arbitrary code. The issue arises from the application's handling of the `/execute_code` endpoint, which is intended to be blocked from external access by default. However, attackers can exploit the `/update_setting` endpoint, which lacks proper access control, to modify the `host` configuration at runtime. By changing the `host` setting to an attacker-controlled value, the restriction on the `/execute_code` endpoint can be bypassed, leading to remote code execution. This vulnerability is due to improper neutralization of special elements used in an OS command (`Improper Neutralization of Special Elements used in an OS Command`).

Baicells EG7035-M11 devices with firmware through BCE-ODU-1.0.8 are vulnerable to improper code exploitation via HTTP GET command injections. Commands are executed using pre-login execution and executed with root permissions. The following methods have been tested and validated by a 3rd party analyst and have been confirmed exploitable special thanks to Lionel Musonza for the discovery.

TOTOLINK_A3700R_V9.1.2u.6165_20211012has a command Injection vulnerability via setOpModeCfg

An improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiSIEM version 7.1.0 through 7.1.1 and 7.0.0 through 7.0.2 and 6.7.0 through 6.7.8 and 6.6.0 through 6.6.3 and 6.5.0 through 6.5.2 and 6.4.0 through 6.4.2 allows attacker to execute unauthorized code or commands via via crafted API requests.

A vulnerability classified as critical was found in D-Link DI-7300G+ 19.12.25A1. Affected by this vulnerability is an unknown functionality of the file httpd_debug.asp. The manipulation of the argument Time leads to os command injection. The exploit has been disclosed to the public and may be used.

A command injection vulnerability exists in the gena.cgi module of D-Link DAP-1650 devices. An unauthenticated attacker can exploit this vulnerability to gain command execution on the device as root.