An issue found in FLIR-DVTEL version not specified allows a remote attacker to execute arbitrary code via a crafted request to the management page of the device.

A vulnerability classified as critical has been found in Teledyne FLIR AX8 up to 1.46.16. Affected is an unknown function of the file palette.php of the component Web Service Handler. The manipulation of the argument palette leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-215118 is the identifier assigned to this vulnerability.

All FLIR AX8 thermal sensor cameras version up to and including 1.46.16 are vulnerable to Remote Command Injection. This can be exploited to inject and execute arbitrary shell commands as the root user through the id HTTP POST parameter in the res.php endpoint. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the root privileges.

A vulnerability classified as critical was found in FLIR AX8 up to 1.46.16. This vulnerability affects the function setDataTime of the file \usr\www\application\models\settingsregional.php. The manipulation of the argument year/month/day/hour/minute leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the pid parameter in the disconnectVPN function.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

An issue was discovered in Anyka Microelectronics AK3918EV300 MCU v18. A command injection vulnerability in the network configuration script within the MCU's operating system allows attackers to perform arbitrary command execution via a crafted wifi SSID or password.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetPppoeServer. This vulnerability allows attackers to execute arbitrary commands via the pppoeServerIP, pppoeServerStartIP, and pppoeServerEndIP parameters.

Tenda AX3 v16.03.12.10_CN was discovered to contain a command injection vulnerability in the function WanParameterSetting. This vulnerability allows attackers to execute arbitrary commands via the gateway, dns1, and dns2 parameters.

An issue was discovered in SeaCMS <=12.9 which allows remote attackers to execute arbitrary code via admin_ping.php.

Multiple OS command injection vulnerabilities exist in the login.cgi set_sys_init() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists within the `restart_hour_value` POST parameter.

Multiple OS command injection vulnerabilities exist in the login.cgi set_sys_init() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists within the `restart_min_value` POST parameter.

An attacker is able to remotely inject arbitrary commands by sending especially crafted packets destined to the PAPI (Aruba Networks AP Management protocol) UDP port (8211) of access-pointsor controllers in Aruba 9000 Gateway; Aruba 7000 Series Mobility Controllers; Aruba 7200 Series Mobility Controllers version(s): 2.1.0.1, 2.2.0.0 and below; 6.4.4.23, 6.5.4.17, 8.2.2.9, 8.3.0.13, 8.5.0.10, 8.6.0.5, 8.7.0.0 and below ; 6.4.4.23, 6.5.4.17, 8.2.2.9, 8.3.0.13, 8.5.0.10, 8.6.0.5, 8.7.0.0 and below.

GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain a vulnerability can be exploited to manipulate routers by passing malicious shell commands through the s2s API.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23552.

Tenda AX3 v16.03.12.10_CN was discovered to contain a command injection vulnerability in the function mDMZSetCfg. This vulnerability allows attackers to execute arbitrary commands via the dmzIp parameter.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetQvlanList. This vulnerability allows attackers to execute arbitrary commands via the qvlanIP parameter.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetIpGroup. This vulnerability allows attackers to execute arbitrary commands via the IPGroupStartIP and IPGroupEndIP parameters.

Tenda AC18 v15.03.05.19(6318_)_cn was discovered to contain a command injection vulnerability via the deviceName parameter in the setUsbUnload function.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain multiple command injection vulnerabilities via the rtLogEnabled and rtLogServer parameters in the setSyslogCfg function.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the command parameter in the setTracerouteCfg function.

OPTILINK OP-XT71000N V2.2 is vulnerable to Remote Code Execution. The issue occurs when the attacker sends an arbitrary code on "/diag_ping_admin.asp" to "PingTest" interface that leads to COMMAND EXECUTION. An attacker can successfully trigger the COMMAND and can compromise full system.

On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, and v5.4.5 for AirSync firmware. For example, Nanostation5 (Air OS) is affected.

TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a command injection via the host_time parameter in the NTPSyncWithHost function.

Tenda O3V2 v1.0.0.12(3880) was discovered to contain a Blind Command Injection via stpEn parameter in the SetStp function. This vulnerability allows attackers to execute arbitrary commands with root privileges.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the FileName parameter in the UploadFirmwareFile function.

huedawn-tesseract 0.3.3 and dawnsparks-node-tesseract 0.4.0 to 0.4.1 was discovered to contain a remote code execution (RCE) vulnerability via the child_process function.

Roundcube Webmail before 1.5.7 and 1.6.x before 1.6.7 on Windows allows command injection via im_convert_path and im_identify_path. NOTE: this issue exists because of an incomplete fix for CVE-2020-12641.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetDMZ. This vulnerability allows attackers to execute arbitrary commands via the dmzHost1 parameter.

Shenzen Tenda Technology IP Camera CP3 V11.10.00.2211041355 allows unauthenticated remote code execution via an XML document.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the hostname parameter in the setOpModeCfg function.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the ip parameter in the setDiagnosisCfg function.

Mocodo Mocodo Online 4.2.6 and below does not properly sanitize the sql_case input field in /web/generate.php, allowing remote attackers to execute arbitrary commands and potentially command injection, leading to remote code execution (RCE) under certain conditions.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23543.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Beijing Digital China Cloud Technology Co., Ltd. DCME-320 v.7.4.12.60 has a command execution vulnerability, which can be exploited to obtain device administrator privileges via the getVar function in the code/function/system/tool/ping.php file.

webservice in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23710.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_cancel_wps function.

A vulnerability in NuPoint Messenger (NPM) of Mitel MiCollab through 9.8.0.33 allows an unauthenticated attacker to conduct a command injection attack due to insufficient parameter sanitization.

A command inject vulnerability allows an attacker to perform command injection on Windows applications that indirectly depend on the CreateProcess function when the specific conditions are satisfied.

Jenkins Convert To Pipeline Plugin 1.0 and earlier uses basic string concatenation to convert Freestyle projects' Build Environment, Build Steps, and Post-build Actions to the equivalent Pipeline step invocations, allowing attackers able to configure Freestyle projects to prepare a crafted configuration that injects Pipeline script code into the (unsandboxed) Pipeline resulting from a convertion by Jenkins Convert To Pipeline Plugin.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the cmd parameter in the webcmd function.

TP-Link TL-WPA8630P (US)_ V2_ Version 171011 was discovered to contain a command injection vulnerability via the key parameter in the function sub_ 40A774.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the enabled parameter at /setting/setWanIeCfg.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the wanStrategy parameter at /setting/setWanIeCfg.

An os command injection vulnerability exists in the touchlist_sync.cgi touchlistsync() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted set of HTTP requests can lead to arbitrary code execution. An attacker can send an HTTP request to trigger this vulnerability.

FOG is a cloning/imaging/rescue suite/inventory management system. Prior to 1.5.10.34, packages/web/lib/fog/reportmaker.class.php in FOG was affected by a command injection via the filename parameter to /fog/management/export.php. This vulnerability is fixed in 1.5.10.34.

TP-Link TL-WPA8630P (US)_ V2_ Version 171011 was discovered to contain a command injection vulnerability via the devicePwd parameter in the function sub_ 40A80C.