A flaw was found in keycloak-model-infinispan in keycloak versions before 14.0.0 where authenticationSessions map in RootAuthenticationSessionEntity grows boundlessly which could lead to a DoS attack.

A memory allocation with excessive size value vulnerability in the license verification function of FortiPortal before 6.0.6 may allow an attacker to perform a denial of service attack via specially crafted license blobs.

An unauthenticated specially crafted packet sent by an attacker over the network will cause a denial-of-service (DoS) vulnerability. Vulnerability allows attacker to stop the PLC. After stopping (ERR LED flashing red), physical access to the PLC is required in order to restart the application. This issue affects: ABB AC500 V2 products with onboard Ethernet version 2.8.4 and prior versions.

A denial of service is possible from excessive resource consumption in net/http and mime/multipart. Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files. With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous. In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct. Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader.

Mastodon is a free, open-source social network server based on ActivityPub. When performing outgoing HTTP queries, Mastodon sets a timeout on individual read operations. Prior to versions 3.5.9, 4.0.5, and 4.1.3, a malicious server can indefinitely extend the duration of the response through slowloris-type attacks. This vulnerability can be used to keep all Mastodon workers busy for an extended duration of time, leading to the server becoming unresponsive. Versions 3.5.9, 4.0.5, and 4.1.3 contain a patch for this issue.

An issue in the gc_col component of MonetDB Server v11.45.17 and v11.46.0 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements.

A Memory Allocation with Excessive Size Value vulnerablity in the TEE_Realloc function in Samsung mTower through 0.3.0 allows a trusted application to trigger a Denial of Service (DoS) by invoking the function TEE_Realloc with an excessive number for the parameter len.

idreamsoft iCMS 7.0.15 allows remote attackers to cause a denial of service (resource consumption) via a query for many comments, as demonstrated by the admincp.php?app=comment&perpage= substring followed by a large positive integer.

The ASN.1 parser in Bouncy Castle Crypto (aka BC Java) 1.63 can trigger a large attempted memory allocation, and resultant OutOfMemoryError error, via crafted ASN.1 data. This is fixed in 1.64.

A vulnerability in the UDP protocol implementation for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to exhaust system resources, resulting in a denial of service (DoS) condition. The vulnerability is due to improper resource management for UDP ingress packets. An attacker could exploit this vulnerability by sending a high rate of UDP packets to an affected system within a short period of time. A successful exploit could allow the attacker to exhaust available system resources, resulting in a DoS condition.

Etherpad < 1.8.3 is affected by a missing lock check which could cause a denial of service. Aggressively targeting random pad import endpoints with empty data would flatten all pads due to lack of rate limiting and missing ownership check.

JetBrains PyCharm before 2019.2 was allocating a buffer of unknown size for one of the connection processes. In a very specific situation, it could lead to a remote invocation of an OOM error message because of Uncontrolled Memory Allocation.

node-fetch before versions 2.6.1 and 3.0.0-beta.9 did not honor the size option after following a redirect, which means that when a content size was over the limit, a FetchError would never get thrown and the process would end without failure. For most people, this fix will have a little or no impact. However, if you are relying on node-fetch to gate files above a size, the impact could be significant, for example: If you don't double-check the size of the data after fetch() has completed, your JS thread could get tied up doing work on a large file (DoS) and/or cost you money in computing.

Bitcoin Core before 25.0 allows remote attackers to cause a denial of service (blocktxn message-handling assertion and node exit) by including transactions in a blocktxn message that are not committed to in a block's merkle root. FillBlock can be called twice for one PartiallyDownloadedBlock instance.

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS, and 9.3 CD is vulnerable to a denial of service attack caused by an error applying configuration changes. IBM X-Force ID: 290335.

In Moodle before 3.9.1, 3.8.4, 3.7.7 and 3.5.13, yui_combo needed to limit the amount of files it can load to help mitigate the risk of denial of service.

Pimcore is an Open Source Data & Experience Management Platform. The Pimcore thumbnail generation can be used to flood the server with large files. By changing the file extension or scaling factor of the requested thumbnail, attackers can create files that are much larger in file size than the original. This vulnerability is fixed in 11.2.4.

An issue was discovered in libexif before 0.6.22. An unrestricted size in handling Canon EXIF MakerNote data could lead to consumption of large amounts of compute time for decoding EXIF data.

HashiCorp Consul and Consul Enterprise include an HTTP API (introduced in 1.2.0) and DNS (introduced in 1.4.3) caching feature that was vulnerable to denial of service. Fixed in 1.6.6 and 1.7.4.

A vulnerability was discovered in GitLab versions before 13.1.10, 13.2.8 and 13.3.4. GitLab Webhook feature could be abused to perform denial of service attacks due to the lack of rate limitation.

The direct_mail extension through 5.2.3 for TYPO3 allows Denial of Service via log entries.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine developed by the OISF and the Suricata community. When parsing an overly long SSH banner, Suricata can use excessive CPU resources, as well as cause excessive logging volume in alert records. This issue has been patched in versions 6.0.17 and 7.0.4.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may consume excessive amounts of memory when processing HTTP/1.1 headers with long field names or requests with long URLs.

The ZlibDecoders in Netty 4.1.x before 4.1.46 allow for unbounded memory allocation while decoding a ZlibEncoded byte stream. An attacker could send a large ZlibEncoded byte stream to the Netty server, forcing the server to allocate all of its free memory to a single decoder.

A flaw was discovered in Undertow in versions before Undertow 2.1.1.Final where certain requests to the "Expect: 100-continue" header may cause an out of memory error. This flaw may potentially lead to a denial of service.

A vulnerability was found in Keycloak before 11.0.1 where DoS attack is possible by sending twenty requests simultaneously to the specified keycloak server, all with a Content-Length header value that exceeds the actual byte count of the request body.

Insufficient file size checks resulted in a denial of service risk in the file picker's unzip functionality.

The SSH daemon on MikroTik routers through v6.44.3 could allow remote attackers to generate CPU activity, trigger refusal of new authorized connections, and cause a reboot via connect and write system calls, because of uncontrolled resource management.

Some HTTP/2 implementations are vulnerable to window size manipulation and stream prioritization manipulation, potentially leading to a denial of service. The attacker requests a large amount of data from a specified resource over multiple streams. They manipulate window size and stream priority to force the server to queue the data in 1-byte chunks. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

A Allocation of Resources Without Limits or Throttling vulnerability in SUSE RKE2 allows attackers with access to K3s servers apiserver/supervisor port (TCP 6443) cause denial of service. This issue affects RKE2: from 1.24.0 before 1.24.17+rke2r1, from v1.25.0 before v1.25.13+rke2r1, from v1.26.0 before v1.26.8+rke2r1, from v1.27.0 before v1.27.5+rke2r1, from v1.28.0 before v1.28.1+rke2r1.

Some HTTP/2 implementations are vulnerable to unconstrained interal data buffering, potentially leading to a denial of service. The attacker opens the HTTP/2 window so the peer can send without constraint; however, they leave the TCP window closed so the peer cannot actually write (many of) the bytes on the wire. The attacker then sends a stream of requests for a large response object. Depending on how the servers queue the responses, this can consume excess memory, CPU, or both.

Some HTTP/2 implementations are vulnerable to a flood of empty frames, potentially leading to a denial of service. The attacker sends a stream of frames with an empty payload and without the end-of-stream flag. These frames can be DATA, HEADERS, CONTINUATION and/or PUSH_PROMISE. The peer spends time processing each frame disproportionate to attack bandwidth. This can consume excess CPU.

Some HTTP/2 implementations are vulnerable to a reset flood, potentially leading to a denial of service. The attacker opens a number of streams and sends an invalid request over each stream that should solicit a stream of RST_STREAM frames from the peer. Depending on how the peer queues the RST_STREAM frames, this can consume excess memory, CPU, or both.

Some HTTP/2 implementations are vulnerable to a settings flood, potentially leading to a denial of service. The attacker sends a stream of SETTINGS frames to the peer. Since the RFC requires that the peer reply with one acknowledgement per SETTINGS frame, an empty SETTINGS frame is almost equivalent in behavior to a ping. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

In Tor before 0.3.3.12, 0.3.4.x before 0.3.4.11, 0.3.5.x before 0.3.5.8, and 0.4.x before 0.4.0.2-alpha, remote denial of service against Tor clients and relays can occur via memory exhaustion in the KIST cell scheduler.

Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: Thread Pooling). Supported versions that are affected are 8.0.39 and prior, 8.4.2 and prior and 9.0.1 and prior. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H).

An issue was discovered in 3S-Smart CODESYS V3 products. A crafted communication request may cause uncontrolled memory allocations in the affected CODESYS products and may result in a denial-of-service condition. All variants of the following CODESYS V3 products in all versions prior to v3.5.14.20 that contain the CmpGateway component are affected, regardless of the CPU type or operating system: CODESYS Control for BeagleBone, CODESYS Control for emPC-A/iMX6, CODESYS Control for IOT2000, CODESYS Control for Linux, CODESYS Control for PFC100, CODESYS Control for PFC200, CODESYS Control for Raspberry Pi, CODESYS Control V3 Runtime System Toolkit, CODESYS Gateway V3, CODESYS V3 Development System.

A vulnerability in the Internet Key Exchange version 2 (IKEv2) function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to prevent an affected device from processing any control plane UDP packets.&nbsp; This vulnerability is due to improper handling of malformed IKEv2 packets. An attacker could exploit this vulnerability by sending malformed IKEv2 packets to an affected device. A successful exploit could allow the attacker to prevent the affected device from processing any control plane UDP packets, resulting in a denial of service (DoS) condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability was found in CRI-O that causes memory or disk space exhaustion on the node for anyone with access to the Kube API. The ExecSync request runs commands in a container and logs the output of the command. This output is then read by CRI-O after command execution, and it is read in a manner where the entire file corresponding to the output of the command is read in. Thus, if the output of the command is large it is possible to exhaust the memory or the disk space of the node when CRI-O reads the output of the command. The highest threat from this vulnerability is system availability.

Sengled Dimmer Switch V0.0.9 contains a denial of service (DOS) vulnerability, which allows a remote attacker to send malicious Zigbee messages to a vulnerable device and cause crashes. After receiving the malicious command, the device will keep reporting its status and finally drain its battery after receiving the 'Set_short_poll_interval' command.

Django 1.11.x before 1.11.19, 2.0.x before 2.0.11, and 2.1.x before 2.1.6 allows Uncontrolled Memory Consumption via a malicious attacker-supplied value to the django.utils.numberformat.format() function.

An issue has been discovered in GitLab CE/EE affecting all versions from 8.13 before 17.10.7, 17.11 before 17.11.3, and 18.0 before 18.0.1. A lack of input validation in Board Names could be used to trigger a denial of service.

An issue has been discovered affecting service availability via issue preview in GitLab CE/EE affecting all versions from 16.7 before 17.9.7, 17.10 before 17.10.5, and 17.11 before 17.11.1.

In GraphQL Java (aka graphql-java) before 20.1, an attacker can send a crafted GraphQL query that causes stack consumption. The fixed versions are 20.1, 19.4, 18.4, 17.5, and 0.0.0-2023-03-20T01-49-44-80e3135.

An issue has been discovered in GitLab CE/EE affecting all versions before 17.10.7, 17.11 before 17.11.3, and 18.0 before 18.0.1. This could allow an authenticated attacker to cause a denial of service condition by exhausting server resources.

An issue has been discovered in GitLab CE/EE affecting all versions from 8.7 before 17.10.8, 17.11 before 17.11.4, and 18.0 before 18.0.2. Improper input validation in Tokens Names could be used to trigger a denial of service.

Keep-alive HTTP and HTTPS connections can remain open and inactive for up to 2 minutes in Node.js 6.16.0 and earlier. Node.js 8.0.0 introduced a dedicated server.keepAliveTimeout which defaults to 5 seconds. The behavior in Node.js 6.16.0 and earlier is a potential Denial of Service (DoS) attack vector. Node.js 6.17.0 introduces server.keepAliveTimeout and the 5-second default.

In Node.js including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1, an attacker can cause a Denial of Service (DoS) by establishing an HTTP or HTTPS connection in keep-alive mode and by sending headers very slowly. This keeps the connection and associated resources alive for a long period of time. Potential attacks are mitigated by the use of a load balancer or other proxy layer. This vulnerability is an extension of CVE-2018-12121, addressed in November and impacts all active Node.js release lines including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1.

An issue was discovered in GitLab CE/EE affecting all versions starting from 13.6 prior to 17.2.9, starting from 17.3 prior to 17.3.5, and starting from 17.4 prior to 17.4.2, where viewing diffs of MR with conflicts can be slow.

nptd-rs is a tool for synchronizing your computer's clock, implementing the NTP and NTS protocols. There is a missing limit for accepted NTS-KE connections. This allows an unauthenticated remote attacker to crash ntpd-rs when an NTS-KE server is configured. Non NTS-KE server configurations, such as the default ntpd-rs configuration, are unaffected. This vulnerability has been patched in version 1.1.3.