Indy Node is the server portion of a distributed ledger purpose-built for decentralized identity. In versions 1.12.4 and prior, the `pool-upgrade` request handler in Indy-Node allows an improperly authenticated attacker to remotely execute code on nodes within the network. The `pool-upgrade` request handler in Indy-Node 1.12.5 has been updated to properly authenticate pool-upgrade transactions before any processing is performed by the request handler. The transactions are further sanitized to prevent remote code execution. As a workaround, endorsers should not create DIDs for untrusted users. A vulnerable ledger should configure `auth_rules` to prevent new DIDs from being written to the ledger until the network can be upgraded.

Improper Authentication vulnerability in HYPR Keycloak Authenticator Extension allows Authentication Abuse.This issue affects HYPR Keycloak Authenticator Extension: before 7.10.2, before 8.0.3.

Prometheus Exporter Toolkit is a utility package to build exporters. Prior to versions 0.7.2 and 0.8.2, if someone has access to a Prometheus web.yml file and users' bcrypted passwords, they can bypass security by poisoning the built-in authentication cache. Versions 0.7.2 and 0.8.2 contain a fix for the issue. There is no workaround, but attacker must have access to the hashed password to use this functionality.

An issue was discovered in Veritas NetBackup Flex Scale through 3.0 and Access Appliance through 8.0.100. A default password is persisted after installation and may be discovered and used to escalate privileges.

Improper authentication in the Intel(R) DCM software before version 5.1 may allow an authenticated user to potentially enable escalation of privilege via network access.

A vulnerability has been identified in which Rancher does not automatically clean up a user which has been deleted from the configured authentication provider (AP). This characteristic also applies to disabled or revoked users, Rancher will not reflect these modifications which may leave the user’s tokens still usable.

Warpgate is an SSH, HTTPS and MySQL bastion host for Linux that doesn't need special client apps. When logging in as a user with SSO enabled an attacker may authenticate as an other user. Any user account which does not have a second factor enabled could be compromised. This issue has been addressed in commit `8173f6512a` and in releases starting with version 0.7.3. Users are advised to upgrade. Users unable to upgrade should require their users to use a second factor in authentication.

AIMANAGER before B115 on MONITORAPP Application Insight Web Application Firewall (AIWAF) devices with Manager 2.1.0 has Improper Authentication. An attacker can gain administrative access by modifying the response to an authentication check request.

Incorrect Privilege Assignment vulnerability in Hitachi Storage Plug-in for VMware vCenter allows remote authenticated users to cause privilege escalation. This issue affects Hitachi Storage Plug-in for VMware vCenter: from 04.8.0 before 04.9.1.

Jenkins versions 2.56 and earlier as well as 2.46.1 LTS and earlier are vulnerable to a login command which allowed impersonating any Jenkins user. The `login` command available in the remoting-based CLI stored the encrypted user name of the successfully authenticated user in a cache file used to authenticate further commands. Users with sufficient permission to create secrets in Jenkins, and download their encrypted values (e.g. with Job/Configure permission), were able to impersonate any other Jenkins user on the same instance.

Once an user is authenticated on Jolokia, he can potentially trigger arbitrary code execution.  In details, in ActiveMQ configurations, jetty allows org.jolokia.http.AgentServlet to handler request to /api/jolokia org.jolokia.http.HttpRequestHandler#handlePostRequest is able to create JmxRequest through JSONObject. And calls to org.jolokia.http.HttpRequestHandler#executeRequest. Into deeper calling stacks, org.jolokia.handler.ExecHandler#doHandleRequest can be invoked through refection. This could lead to RCE through via various mbeans. One example is unrestricted deserialization in jdk.management.jfr.FlightRecorderMXBeanImpl which exists on Java version above 11. 1 Call newRecording. 2 Call setConfiguration. And a webshell data hides in it. 3 Call startRecording. 4 Call copyTo method. The webshell will be written to a .jsp file. The mitigation is to restrict (by default) the actions authorized on Jolokia, or disable Jolokia. A more restrictive Jolokia configuration has been defined in default ActiveMQ distribution. We encourage users to upgrade to ActiveMQ distributions version including updated Jolokia configuration: 5.16.6, 5.17.4, 5.18.0, 6.0.0.

Arvados is an open source platform for managing and analyzing biomedical big data. In versions prior to 2.4.3, when using Portable Authentication Modules (PAM) for user authentication, if a user presented valid credentials but the account is disabled or otherwise not allowed to access the host (such as an expired password), it would still be accepted for access to Arvados. Other authentication methods (LDAP, OpenID Connect) supported by Arvados are not affected by this flaw. This issue is patched in version 2.4.3. Workaround for this issue is to migrate to a different authentication method supported by Arvados, such as LDAP.

A flaw was found in the reset credential flow in all Keycloak versions before 8.0.0. This flaw allows an attacker to gain unauthorized access to the application.

A vulnerability in the Cisco Umbrella API could allow an authenticated, remote attacker to view and modify data across their organization and other organizations. The vulnerability is due to insufficient authentication configurations for the API interface of Cisco Umbrella. An attacker could exploit this vulnerability to view and potentially modify data for their organization or other organizations. A successful exploit could allow the attacker to read or modify data across multiple organizations.

NodeBB before version 1.14.3 has a bug introduced in version 1.12.2 in the validation logic that makes it possible to change the password of any user on a running NodeBB forum by sending a specially crafted socket.io call to the server. This could lead to a privilege escalation event due via an account takeover. As a workaround you may cherry-pick the following commit from the project's repository to your running instance of NodeBB: 16cee1b03ba3eee177834a1fdac4aa8a12b39d2a. This is fixed in version 1.14.3.

An Incorrect Access Control issue was discovered on MicroDigital N-series cameras with firmware through 6400.0.8.5 because any valid cookie can be used to make requests as an admin.

main/manager.c in the Manager Interface in Asterisk Open Source 1.6.2.x before 1.6.2.24, 1.8.x before 1.8.11.1, and 10.x before 10.3.1 and Asterisk Business Edition C.3.x before C.3.7.4 does not properly enforce System class authorization requirements, which allows remote authenticated users to execute arbitrary commands via (1) the originate action in the MixMonitor application, (2) the SHELL and EVAL functions in the GetVar manager action, or (3) the SHELL and EVAL functions in the Status manager action.

Certain Zyxel products have a locally accessible binary that allows a non-root user to generate a password for an undocumented user account that can be used for a TELNET session as root. This affects NAS520 V5.21(AASZ.4)C0, V5.21(AASZ.0)C0, V5.11(AASZ.3)C0, and V5.11(AASZ.0)C0; NAS542 V5.11(ABAG.0)C0, V5.20(ABAG.1)C0, and V5.21(ABAG.3)C0; NSA325 v2_V4.81(AALS.0)C0 and V4.81(AAAJ.1)C0; NSA310 4.22(AFK.0)C0 and 4.22(AFK.1)C0; NAS326 V5.21(AAZF.8)C0, V5.11(AAZF.4)C0, V5.11(AAZF.2)C0, and V5.11(AAZF.3)C0; NSA310S V4.75(AALH.2)C0; NSA320S V4.75(AANV.2)C0 and V4.75(AANV.1)C0; NSA221 V4.41(AFM.1)C0; and NAS540 V5.21(AATB.5)C0 and V5.21(AATB.3)C0.

Discourse is an open source discussion platform. Versions prior to 2.7.13 in `stable`, 2.8.0.beta11 in `beta`, and 2.8.0.beta11 in `tests-passed` allow some users to log in to a community before they should be able to do so. A user invited via email to a forum with `must_approve_users` enabled is going to be automatically logged in, bypassing the check that does not allow unapproved users to sign in. They will be able to do everything an approved user can do. If they logout, they cannot log back in. This issue is patched in the `stable` version 2.7.13, `beta` version 2.8.0.beta11, and `tests-passed` version 2.8.0.beta11. One may disable invites as a workaround. Administrators can increase `min_trust_level_to_allow_invite` to reduce the attack surface to more trusted users.

In GitLab before 13.0.12, 13.1.6, and 13.2.3, improper access control was used on the Applications page

Affected versions of Trend Micro Mobile Security (Enterprise) 9.8 SP5 contain some widgets that would allow a remote user to bypass authentication and potentially chain with other vulnerabilities. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit these vulnerabilities. This is similar to, but not identical to CVE-2023-32524.

A remote code execution vulnerability exists in Microsoft Exchange software when the software fails to properly handle objects in memory, aka 'Microsoft Exchange Memory Corruption Vulnerability'.

A Trusted RFC connection in SAP KERNEL 32NUC, SAP KERNEL 32Unicode, SAP KERNEL 64NUC, SAP KERNEL 64Unicode 7.21, 7.21EXT, 7.22, 7.22EXT; SAP KERNEL from 7.21 to 7.22, 7.45, 7.49, can be established to a different client or a different user on the same system, although no explicit Trusted/Trusting Relation to the same system has been defined.

libspdm is a sample implementation that follows the DMTF SPDM specifications. A vulnerability has been identified in SPDM session establishment in libspdm prior to version 2.3.1. If a device supports both DHE session and PSK session with mutual authentication, the attacker may be able to establish the session with `KEY_EXCHANGE` and `PSK_FINISH` to bypass the mutual authentication. This is most likely to happen when the Requester begins a session using one method (DHE, for example) and then uses the other method's finish (PSK_FINISH in this example) to establish the session. The session hashes would be expected to fail in this case, but the condition was not detected. This issue only impacts the SPDM responder, which supports `KEY_EX_CAP=1 and `PSK_CAP=10b` at same time with mutual authentication requirement. The SPDM requester is not impacted. The SPDM responder is not impacted if `KEY_EX_CAP=0` or `PSK_CAP=0` or `PSK_CAP=01b`. The SPDM responder is not impacted if mutual authentication is not required. libspdm 1.0, 2.0, 2.1, 2.2, 2.3 are all impacted. Older branches are not maintained, but users of the 2.3 branch may receive a patch in version 2.3.2. The SPDM specification (DSP0274) does not contain this vulnerability.

An authentication issue was addressed with improved state management. This issue is fixed in macOS Mojave 10.14.5. A user may be unexpectedly logged in to another user’s account.

Prima Systems FlexAir, Versions 2.3.38 and prior. The application allows improper authentication using the MD5 hash value of the password, which may allow an attacker with access to the database to login as admin without decrypting the password.

A authentication bypass vulnerability exists in GitLab CE/EE <v12.3.2, <v12.2.6, and <v12.1.10 in the Salesforce login integration that could be used by an attacker to create an account that bypassed domain restrictions and email verification requirements.

An issue was discovered in OverIT Geocall 6.3 before build 2:346977. Weak authentication and session management allows an authenticated user to obtain access to the Administrative control panel and execute administrative functions.

An authentication issue was discovered in GitLab that allowed a bypass of email verification. This was addressed in GitLab 12.1.2 and 12.0.4.

An exploitable authentication bypass vulnerability exists in the hostname processing of the Moxa AWK-3131A firmware version 1.13. A specially configured device hostname can cause the device to interpret select remote traffic as local traffic, resulting in a bypass of web authentication. An attacker can send authenticated SNMP requests to trigger this vulnerability.

Apache Guacamole 1.2.0 and 1.3.0 do not properly validate responses received from a SAML identity provider. If SAML support is enabled, this may allow a malicious user to assume the identity of another Guacamole user.

eLabFTW is an electronic lab notebook manager for research teams. In versions prior to 4.2.0 there is a vulnerability which allows any authenticated user to gain access to arbitrary accounts by setting a specially crafted email address. This vulnerability impacts all instances that have not set an explicit email domain name allowlist. Note that whereas neither administrators nor targeted users are notified of a change, an attacker will need to control an account. The default settings require administrators to validate newly created accounts. The problem has been patched. Users should upgrade to at least version 4.2.0. For users unable to upgrade enabling an email domain allow list (from Sysconfig panel, Security tab) will completely resolve the issue.

Autolab, a course management service that enables auto-graded programming assignments, has misconfigured reset password permissions in version 3.0.0. For email-based accounts, users with insufficient privileges could reset and theoretically access privileged users' accounts by resetting their passwords. This issue is fixed in version 3.0.1. No known workarounds exist.

In Apache Zeppelin prior to 0.8.0 the cron scheduler was enabled by default and could allow users to run paragraphs as other users without authentication.

Improper Authentication vulnerability in Snow Software AB Snow License Manager on Windows allows a networked attacker to perform an Authentication Bypass if Active Directory Authentication is enabled.This issue affects Snow License Manager: from 9.33.2 through 9.34.0.

A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690.

Improper authentication vulnerability in multiple digital video recorders provided by TAKENAKA ENGINEERING CO., LTD. allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 7.8 before 16.9.6, all versions starting from 16.10 before 16.10.4, all versions starting from 16.11 before 16.11.1. Under certain conditions, an attacker with their Bitbucket account credentials may be able to take over a GitLab account linked to another user's Bitbucket account, if Bitbucket is used as an OAuth 2.0 provider on GitLab.

Improper authentication in Microsoft Dataverse allows an authorized attacker to elevate privileges over a network.

Grav is a content management system (CMS). Prior to version 1.7.43, users who may write a page may use the `frontmatter` feature due to insufficient permission validation and inadequate file name validation. This may lead to remote code execution. Version 1.7.43 fixes this issue.

Code-projects Simple School Managment System 1.0 allows Authentication Bypass via the username and password parameters at School/teacher_login.php.

Mattermost versions 8.1.x before 8.1.10, 9.2.x before 9.2.6, 9.3.x before 9.3.2, and 9.4.x before 9.4.3 fail to correctly verify account ownership when switching from email to SAML authentication, allowing an authenticated attacker to take over other user accounts via a crafted switch request under specific conditions.

An issue was discovered in Centreon Web through 19.04.3. When a user changes his password on his profile page, the contact_autologin_key field in the database becomes blank when it should be NULL. This makes it possible to partially bypass authentication.

Datalogic AV7000 Linear barcode scanner all versions prior to 4.6.0.0 is vulnerable to authentication bypass, which may allow an attacker to remotely execute arbitrary code.

Search Guard Kibana Plugin versions before 5.6.8-7 and before 6.x.y-12 had an issue that an authenticated Kibana user could impersonate as kibanaserver user when providing wrong credentials when all of the following conditions a-c are true: a) Kibana is configured to use Single-Sign-On as authentication method, one of Kerberos, JWT, Proxy, Client certificate. b) The kibanaserver user is configured to use HTTP Basic as the authentication method. c) Search Guard is configured to use an SSO authentication domain and HTTP Basic at the same time

Huawei iBMC V200R002C60 have an authentication bypass vulnerability. A remote attacker with low privilege may craft specific messages to upload authentication certificate to the affected products. Due to improper validation of the upload authority, successful exploit may cause privilege elevation.

An issue was discovered in OpenText Content Suite Platform 22.1 (16.2.19.1803). The request handler for ll.KeepAliveSession sets a valid AdminPwd cookie even when the Web Admin password was not entered. This allows access to endpoints, which require a valid AdminPwd cookie, without knowing the password.

There is an authentication bypass vulnerability in some Huawei servers. A remote attacker with low privilege may bypass the authentication by some special operations. Due to insufficient authentication, an attacker may exploit the vulnerability to get some sensitive information and high-level users' privilege.

Improper authentication vulnerability in UDR-JA1604/UDR-JA1608/UDR-JA1616 firmware versions 71x10.1.107112.43A and earlier allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.

Incorrect Privilege Assignment vulnerability in Hitachi Storage Plug-in for VMware vCenter allows remote authenticated users to cause privilege escalation. This issue affects Hitachi Storage Plug-in for VMware vCenter: from 04.9.0 before 04.9.1.