Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address these security vulnerabilities.

Authenticated command injection vulnerabilities exist in the web-based management interface of mobility conductors running AOS-8 operating system. Successful exploitation could allow an authenticated malicious actor to execute arbitrary commands as a privileged user on the underlying operating system.

The "RAP console" feature in ArubaOS 5.x through 6.2.x, 6.3.x before 6.3.1.15, and 6.4.x before 6.4.2.4 on Aruba access points in Remote Access Point (AP) mode allows remote attackers to execute arbitrary commands via unspecified vectors.

Authenticated command injection vulnerabilities exist in the web-based management interface of mobility conductors running AOS-8 operating system. Successful exploitation could allow an authenticated malicious actor to execute arbitrary commands as a privileged user on the underlying operating system.

Authenticated command injection vulnerabilities exist in the web-based management interface of mobility conductors running AOS-8 operating system. Successful exploitation could allow an authenticated malicious actor to execute arbitrary commands as a privileged user on the underlying operating system.

A command injection vulnerability has been identified in the command line interface of the HPE Aruba Networking Airwave Platform. An authenticated attacker could exploit this vulnerability to execute arbitrary operating system commands with elevated privileges on the underlying operating system.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A vulnerability in the web-based management interface of HPE Aruba Networking ClearPass Policy Manager (CPPM) allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as a lower privileged user on the underlying operating system.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

The configuration backup/restore function in Silver Peak Unity ECOSTM (ECOS) appliance software was found to directly incorporate the user-controlled config filename in a subsequent shell command, allowing an attacker to manipulate the resulting command by injecting valid OS command input. This vulnerability can be exploited by an attacker with authenticated access to the Orchestrator UI or EdgeConnect UI. This affects all ECOS versions prior to: 8.1.9.15, 8.3.0.8, 8.3.1.2, 8.3.2.0, 9.0.2.0, and 9.1.0.0.

Authenticated command injection vulnerability exists in the ArubaOS command line interface. Successful exploitation of this vulnerability result in the ability to inject shell commands on the underlying operating system.

Authenticated command execution vulnerability exist in the ArubaOS command line interface (CLI). Successful exploitation of this vulnerabilities result in the ability to run arbitrary commands as a priviledge user on the underlying operating system.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via HTTP. An authenticated remote attacker can execute commands as the root user by sending a crafted HTTP GET to the UCM's "Old" HTTPS API.

Improper neutralization of special elements used in an OS command in Nagios XI 5.7.3 allows a remote, authenticated admin user to execute operating system commands with the privileges of the apache user.

Adobe Commerce versions 2.4.6-p1 (and earlier), 2.4.5-p3 (and earlier) and 2.4.4-p4 (and earlier) are affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could lead to arbitrary code execution by an admin-privilege authenticated attacker. Exploitation of this issue does not require user interaction.

RSA Archer, versions prior to 6.7 P3 (6.7.0.3), contain a command injection vulnerability. AN authenticated malicious user with administrator privileges could potentially exploit this vulnerability to execute arbitrary commands on the system where the vulnerable application is deployed.

The device-management command-line interface in Palo Alto Networks PAN-OS 4.0.x before 4.0.8 and 4.1.x before 4.1.1 allows remote authenticated users to execute arbitrary commands via unspecified vectors, aka Ref ID 33476.

In the "webupg" binary of D-Link DIR-825 G1, because of the lack of parameter verification, attackers can use "cmd" parameters to execute arbitrary system commands after obtaining authorization.

TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n allow remote code execution with a single HTTP request by placing shell commands in a "host=" line within HTTP POST data.

A vulnerability in SonicWall SMA100 appliance allow an authenticated management-user to perform OS command injection using HTTP POST parameters. This vulnerability affected SMA100 Appliance version 10.2.0.2-20sv and earlier.

Dell EMC Integrated Data Protection Appliance versions 2.0, 2.1, 2.2, 2.3, 2.4 contain a command injection vulnerability in the ACM component. A remote authenticated malicious user with root privileges could inject parameters in the ACM component APIs that could lead to manipulation of passwords and execution of malicious commands on ACM component.

Dell EMC OpenManage Enterprise-Modular (OME-M) versions prior to 1.10.00 contain a command injection vulnerability. A remote authenticated malicious user with high privileges could potentially exploit the vulnerability to execute arbitrary shell commands on the affected system.

Grandstream GWN7000 firmware version 1.0.9.4 and below allows authenticated remote users to modify the system's crontab via undocumented API. An attacker can use this functionality to execute arbitrary OS commands on the router.

Logstorage version 8.0.0 and earlier, and ELC Analytics version 3.0.0 and earlier allow remote attackers to execute arbitrary OS commands via a specially crafted log file.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to execute arbitrary OS commands by navigating to the Diagnostics Ping page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

An issue was discovered in Rubrik 5.0.3-2296. An OS command injection vulnerability allows an authenticated attacker to remotely execute arbitrary code on Rubrik-managed systems.

IBM Spectrum Scale and IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 175419.

In Horde_Crypt before 2.7.6, as used in Horde Groupware Webmail Edition through 5.2.17, OS Command Injection can occur if the attacker is an authenticated Horde Webmail user, has PGP features enabled in their preferences, and attempts to encrypt an email addressed to a maliciously crafted email address.

In Limdu before 0.95, the trainBatch function has a command injection vulnerability. Clients of the Limdu library are unlikely to be aware of this, so they might unwittingly write code that contains a vulnerability. This has been patched in 0.95.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow a remote attacker to execute arbitrary commands on the system in the context of root user, caused by improper validation of user-supplied input. IBM X-Force ID: 174966.

An issue was discovered in Galleon NTS-6002-GPS 4.14.103-Galleon-NTS-6002.V12 4. An authenticated attacker can perform command injection as root via shell metacharacters within the Network Tools section of the web-management interface. All three networking tools are affected (Ping, Traceroute, and DNS Lookup) and their respective input fields (ping_address, trace_address, nslookup_address).

A Command Injection vulnerability in httpd web server (setup.cgi) in SerComm h500s, FW: lowi-h500s-v3.4.22 allows logged in administrators to arbitrary OS commands as root in the device via the connection_type parameter of the statussupport_diagnostic_tracing.json endpoint.

VMware Workspace One Access, Access Connector, Identity Manager, and Identity Manager Connector address have a command injection vulnerability.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to admin_account.cgi.

A vulnerability in the esc_listener.py script of Cisco Elastic Services Controllers could allow an authenticated, remote attacker to execute arbitrary commands as the tomcat user on an affected system, aka an Authentication Request Processing Arbitrary Command Execution Vulnerability. More Information: CSCvc76642. Known Affected Releases: 2.2(9.76).

The device-management command-line interface in Palo Alto Networks PAN-OS 4.0.x before 4.0.9 and 4.1.x before 4.1.2 allows remote authenticated users to execute arbitrary commands via unspecified vectors, aka Ref ID 34502.

IBM Security Guardium 11.1 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 174735.

A vulnerability in certain commands of Cisco Elastic Services Controller could allow an authenticated, remote attacker to elevate privileges to root and run dangerous commands on the server. The vulnerability occurs because a "tomcat" user on the system can run certain shell commands, allowing the user to overwrite any file on the filesystem and elevate privileges to root. This vulnerability affects Cisco Elastic Services Controller prior to releases 2.3.1.434 and 2.3.2. Cisco Bug IDs: CSCvc76634.

In QuickBox Pro v2.5.8 and below, the config.php file has a variable which takes a GET parameter value and parses it into a shell_exec(''); function without properly sanitizing any shell arguments, therefore remote code execution is possible. Additionally, as the media server is running as root by default attackers can use the sudo command within this shell_exec(''); function, which allows for privilege escalation by means of RCE.

Due to programming error in function module and report, IS-OIL component in SAP ECC and SAP S/4HANA allows an authenticated attacker to inject an arbitrary operating system command into an unprotected parameter in a common (default) extension.  On successful exploitation, the attacker can read or modify the system data as well as shut down the system.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.2 and below, version 8.5.2 and below, version 8.4.2 and below, version 8.3.2 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests to the alarm dashboard and controller config handlers.

A Command Injection issue in the traceroute feature on TP-Link TL-WR841N V13 (JP) with firmware versions prior to 201216 allows authenticated users to execute arbitrary code as root via shell metacharacters, a different vulnerability than CVE-2018-12577.

An OS command injection vulnerability exists in the console infactory_wlan functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

An issue was discovered in the Manage Plugins page in Nagios XI before 5.8.0. Because the line-ending conversion feature is mishandled during a plugin upload, a remote, authenticated admin user can execute operating-system commands.

Arbitrary command execution can occur in Webmin through 1.962. Any user authorized for the Package Updates module can execute arbitrary commands with root privileges via vectors involving %0A and %0C. NOTE: this issue exists because of an incomplete fix for CVE-2019-12840.

An issue was discovered in Trend Micro InterScan Messaging Security (Virtual Appliance) 9.1-1600. An authenticated user can execute a terminal command in the context of the web server user (which is root). Besides, the default installation of IMSVA comes with default administrator credentials. The saveCert.imss endpoint takes several user inputs and performs blacklisting. After that, it uses them as arguments to a predefined operating-system command without proper sanitization. However, because of an improper blacklisting rule, it's possible to inject arbitrary commands into it.

The Patient Portal of OpenEMR 5.0.2.1 is affected by a Command Injection vulnerability in /interface/main/backup.php. To exploit the vulnerability, an authenticated attacker can send a POST request that executes arbitrary OS commands via shell metacharacters.

Certain TP-Link devices allow Command Injection. This affects NC260 1.5.2 build 200304 and NC450 1.5.3 build 200304.

An exploitable vulnerability exists in the /api/CONFIG/restore functionality of Circle with Disney running firmware 2.0.1. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request trigger this vulnerability.