Zimbra Collaboration Open Source 8.8.15 does not encrypt the initial-login randomly created password (from the "zmprove ca" command). It is visible in cleartext on port UDP 514 (aka the syslog port). NOTE: a third party reports that this cannot be reproduced.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-refresh-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-off" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-on" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

Incorrect Authorization vulnerability in Micro Focus Container Deployment Foundation component affects products: - Hybrid Cloud Management. Versions 2018.05 to 2019.11. - ArcSight Investigate. versions 2.4.0, 3.0.0 and 3.1.0. - ArcSight Transformation Hub. versions 3.0.0, 3.1.0, 3.2.0. - ArcSight Interset. version 6.0.0. - ArcSight ESM (when ArcSight Fusion 1.0 is installed). version 7.2.1. - Service Management Automation (SMA). versions 2018.05 to 2020.02 - Operation Bridge Suite (Containerized). Versions 2018.05 to 2020.02. - Network Operation Management. versions 2017.11 to 2019.11. - Data Center Automation Containerized. versions 2018.05 to 2019.11 - Identity Intelligence. versions 1.1.0 and 1.1.1. The vulnerability could be exploited to provide unauthorized access to the Container Deployment Foundation.

Incorrect Authorization in GitHub repository tiann/kernelsu prior to v0.6.9.

aEnrich a+HRD has inadequate privilege restrictions, an unauthenticated remote attacker can use the API function to upload and execute malicious scripts to control the system or disrupt service.

An issue was discovered in Poly EagleEye Director II before 2.2.2.1. Existence of a certain file (which can be created via an rsync backdoor) causes all API calls to execute as admin without authentication.

Improper Authentication vulnerability in Repute Infosystems BookingPress allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects BookingPress: from n/a through 1.0.74.

Nexkey is a lightweight fork of Misskey v12 optimized for small to medium size servers. Prior to 12.23Q4.5, Nexkey allows external apps using tokens issued by administrators and moderators to call admin APIs. This allows malicious third-party apps to perform operations such as updating server settings, as well as compromise object storage and email server credentials. This issue has been patched in 12.23Q4.5.

Bareos is open source software for backup, archiving, and recovery of data for operating systems. When Bareos Director >= 18.2 >= 18.2 but prior to 21.1.0, 20.0.6, and 19.2.12 is built and configured for PAM authentication, it will skip authorization checks completely. Expired accounts and accounts with expired passwords can still login. This problem will affect users that have PAM enabled. Currently there is no authorization (e.g. check for expired or disabled accounts), but only plain authentication (i.e. check if username and password match). Bareos Director versions 21.1.0, 20.0.6 and 19.2.12 implement the authorization check that was previously missing. The only workaround is to make sure that authentication fails if the user is not authorized.

Mastodon before 3.3.2 and 3.4.x before 3.4.6 has incorrect access control because it does not compact incoming signed JSON-LD activities. (JSON-LD signing has been supported since version 1.6.0.)

In spring security versions prior to 5.4.11+, 5.5.7+ , 5.6.4+ and older unsupported versions, RegexRequestMatcher can easily be misconfigured to be bypassed on some servlet containers. Applications using RegexRequestMatcher with `.` in the regular expression are possibly vulnerable to an authorization bypass.

An incorrect authorization vulnerability was identified in GitHub Enterprise Server, allowing for escalation of privileges in GraphQL API requests from GitHub Apps. This vulnerability allowed an app installed on an organization to gain access to and modify most organization-level resources that are not tied to a repository regardless of granted permissions, such as users and organization-wide projects. Resources associated with repositories were not impacted, such as repository file content, repository-specific projects, issues, or pull requests. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.7.1 and was fixed in versions 3.3.16, 3.4.11, 3.5.8, 3.6.4, 3.7.1. This vulnerability was reported via the GitHub Bug Bounty program.

A traffic classification vulnerability in Juniper Networks Junos OS on the SRX Series Services Gateways may allow an attacker to bypass Juniper Deep Packet Inspection (JDPI) rules and access unauthorized networks or resources, when 'no-syn-check' is enabled on the device. While JDPI correctly classifies out-of-state asymmetric TCP flows as the dynamic-application UNKNOWN, this classification is not provided to the policy module properly and hence traffic continues to use the pre-id-default-policy, which is more permissive, causing the firewall to allow traffic to be forwarded that should have been denied. This issue only occurs when 'set security flow tcp-session no-syn-check' is configured on the device. This issue affects Juniper Networks Junos OS on SRX Series: 18.4 versions prior to 18.4R2-S10, 18.4R3-S10; 19.1 versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R2-S2, 21.1R3; 21.2 versions prior to 21.2R2. This issue does not affect Juniper Networks Junos OS versions prior to 18.4R1.

MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1 does not perform proper authorization checks on multiple API functions. An attacker may gain access to these functions and achieve remote code execution, create a denial-of-service condition, and obtain sensitive information.

An issue has been discovered in GitLab EE affecting all versions starting from 13.12 before 16.2.7, all versions starting from 16.3 before 16.3.4. It was possible for an attacker to run pipeline jobs as an arbitrary user via scheduled security scan policies. This was a bypass of [CVE-2023-3932](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2023-3932) showing additional impact.

A vulnerability, which was classified as critical, has been found in withstars Books-Management-System 1.0. This issue affects some unknown processing of the file /admin/article/list of the component Background Interface. The manipulation leads to missing authorization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

When the LDAP connector is started with StartTLS configured, unauthenticated access is granted. This issue affects: all versions of the LDAP connector prior to 1.5.20.9. The LDAP connector is bundled with Identity Management (IDM) and Remote Connector Server (RCS)

Vulnerability of incomplete read and write permission verification in the GPU module. Successful exploitation of this vulnerability may affect service confidentiality, integrity, and availability.

Vulnerability of incomplete read and write permission verification in the GPU module. Successful exploitation of this vulnerability may affect service confidentiality, integrity, and availability.

In CWP (aka Control Web Panel or CentOS Web Panel) before 0.9.8.1107, attackers can make a crafted request to api/?api=add_server&DHCP= to add an authorized_keys text file in the /resources/ folder.

An Access Control issue discovered in Extreme Networks Switch Engine (EXOS) before 32.5.1.5, also fixed in 22.7, 31.7.2 allows attackers to gain escalated privileges using crafted telnet commands via Redis server.

SAP CommonCryptoLib does not perform necessary authentication checks, which may result in missing or wrong authorization checks for an authenticated user, resulting in escalation of privileges. Depending on the application and the level of privileges acquired, an attacker could abuse functionality restricted to a particular user group as well as read, modify or delete restricted data.

Wire is an open source secure messenger. In affected versions if the an attacker gets an old but valid access token they can take over an account by changing the email. This issue has been resolved in version 3.86 which uses a new endpoint which additionally requires an authentication cookie. See wire-ios-sync-engine and wire-ios-transport references. This is the root advisory that pulls the changes together.

Incorrect Authorization vulnerability in Artbees JupiterX Core allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects JupiterX Core: from n/a through 3.3.8.

Authentication Bypass vulnerability in D-Link DIR-645 firmware version 1.03 allows remote attackers to gain escalated privileges via function phpcgi_main in cgibin. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

DataEase is an open source business intelligence and data visualization tool. Prior to version 2.10.6, there is a flaw in the authentication in the io.dataease.auth.filter.TokenFilter class, which may cause the risk of unauthorized access. The vulnerability has been fixed in v2.10.6. No known workarounds are available.

In JetBrains TeamCity before 2023.05 bypass of permission checks allowing to perform admin actions was possible

In the GlobalBlocking extension before 2020-03-10 for MediaWiki through 1.34.0, an issue related to IP range evaluation resulted in blocked users re-gaining escalated privileges. This is related to the case in which an IP address is contained in two ranges, one of which is locally disabled.

VMware Aria Operations for Logs contains an authentication bypass vulnerability. An unauthenticated, malicious actor can inject files into the operating system of an impacted appliance which can result in remote code execution.

Milesight NCR/camera version 71.8.0.6-r5 allows authentication bypass through an unspecified method.

The Linux DVS server component of Mitel MiVoice Connect through 19.3 SP2 (22.24.1500.0) could allow an unauthenticated attacker with internal network access to execute arbitrary scripts due to improper access control.

Sourcecodester Online Computer and Laptop Store 1.0 is vulnerable to Incorrect Access Control, which allows remote attackers to elevate privileges to the administrator's role.

This vulnerability exists in Milesight 4K/H.265 Series NVR models (MS-Nxxxx-xxG, MS-Nxxxx-xxE, MS-Nxxxx-xxT, MS-Nxxxx-xxH and MS-Nxxxx-xxC), due to improper authorization at the Milesight NVR web-based management interface. A remote attacker could exploit this vulnerability by sending a specially crafted http requests on the targeted device. Successful exploitation of this vulnerability could allow remote attacker to perform unauthorized activities on the targeted device.

Incorrect Authorization vulnerability in Apache Software Foundation Apache IoTDB.This issue affects the iotdb-web-workbench component on 0.13.3. iotdb-web-workbench is an optional component of IoTDB, providing a web console of the database. This problem is fixed from version 0.13.4 of iotdb-web-workbench onwards.

An issue in Zimbra Collaboration (ZCS) v.8.8.15 and v.9.0 allows a remote attacker to escalate privileges and obtain sensitive information via the password and 2FA parameters.

Incorrect authorization in OMICRON StationGuard 1.10 through 2.20 and StationScout 1.30 through 2.20 allows an attacker to bypass intended access restrictions.

Improper authentication vulnerability in T&D Corporation and ESPEC MIC CORP. data logger products allows a remote unauthenticated attacker to login to the product as a registered user. Affected products and versions are as follows: T&D Corporation data logger products (TR-71W/72W all firmware versions, RTR-5W all firmware versions, WDR-7 all firmware versions, WDR-3 all firmware versions, and WS-2 all firmware versions), and ESPEC MIC CORP. data logger products (RT-12N/RS-12N all firmware versions, RT-22BN all firmware versions, and TEU-12N all firmware versions).

Arcserve UDP through 9.0.6034 allows authentication bypass. The method getVersionInfo at WebServiceImpl/services/FlashServiceImpl leaks the AuthUUID token. This token can be used at /WebServiceImpl/services/VirtualStandbyServiceImpl to obtain a valid session. This session can be used to execute any task as administrator.

An authentication bypass vulnerability in the Password Reset component of Gladinet CentreStack before 13.5.9808 allows remote attackers to set a new password for any valid user account, without needing the previous known password, resulting in a full authentication bypass.

The OWASP ModSecurity Core Rule Set (CRS) is affected by a partial rule set bypass by submitting a specially crafted HTTP Content-Type header field that indicates multiple character encoding schemes. A vulnerable back-end can potentially be exploited by declaring multiple Content-Type "charset" names and therefore bypassing the configurable CRS Content-Type header "charset" allow list. An encoded payload can bypass CRS detection this way and may then be decoded by the backend. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised to upgrade to 3.2.2 and 3.3.3 respectively.

An authentication bypass vulnerability in the web client interface for the CL4NX printer before firmware version 1.13.3-u724_r2 provides remote unauthenticated attackers with access to execute commands intended only for valid/authenticated users, such as file uploads and configuration changes.

In ATutor 2.2.4, an unauthenticated attacker can change the application settings and force it to use his crafted database, which allows him to gain access to the application. Next, he can change the directory that the application uploads files to, which allows him to achieve remote code execution. This occurs because install/include/header.php does not restrict certain changes (to db_host, db_login, db_password, and content_dir) within install/include/step5.php.

An issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain control of the device via the change password functionality as it does not prompt for the current password.

A flaw was found in ghostscript, versions 9.x before 9.50, in the setsystemparams procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.

On NXP Kinetis KV1x, Kinetis KV3x, and Kinetis K8x devices, Flash Access Controls (FAC) (a software IP protection method for execute-only access) can be defeated by observing CPU registers and the effect of code/instruction execution.

Apache Shiro before 1.9.1, A RegexRequestMatcher can be misconfigured to be bypassed on some servlet containers. Applications using RegExPatternMatcher with `.` in the regular expression are possibly vulnerable to an authorization bypass.

A vulnerability was found in SourceCodester Online Eyewear Shop 1.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file /classes/Users.php?f=save of the component User Creation Handler. The manipulation of the argument Type with the input 1 leads to improper authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

The WDB target agent debug service in Wind River VxWorks 6.x, 5.x, and earlier, as used on the Rockwell Automation 1756-ENBT series A with firmware 3.2.6 and 3.6.1 and other products, allows remote attackers to read or modify arbitrary memory locations, perform function calls, or manage tasks via requests to UDP port 17185, a related issue to CVE-2005-3804.