A client side rate limit issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges via brute force style attacks.

Cross Site Request Forgery (CSRF) vulnerability in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain control of the device via crafted GET request to /man_password.htm.

An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges on the device via poor credential management.

An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to run arbitrary commands via use of a crafted string in the ping utility.

An Insecure Credential Management issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges via use of weak hashing algorithm.

Incorrect Authorization vulnerability in Wpsoul Greenshift – animation and page builder blocks allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Greenshift – animation and page builder blocks: from n/a through 9.7.

WTCMS 1.0 is vulnerable to Incorrect Access Control in \Common\Controller\HomebaseController.class.php.

OpenFGA is a high-performance authorization/permission engine inspired by Google Zanzibar. Versions prior to 0.2.5 are vulnerable to authorization bypass under certain conditions. You are affected by this vulnerability if you added a tuple with a wildcard (*) assigned to a tupleset relation (the right hand side of a ‘from’ statement). This issue has been patched in version v0.2.5. This update is not backward compatible with any authorization model that uses wildcard on a tupleset relation.

The OWASP ModSecurity Core Rule Set (CRS) is affected by a partial rule set bypass for HTTP multipart requests by submitting a payload that uses a character encoding scheme via the Content-Type or the deprecated Content-Transfer-Encoding multipart MIME header fields that will not be decoded and inspected by the web application firewall engine and the rule set. The multipart payload will therefore bypass detection. A vulnerable backend that supports these encoding schemes can potentially be exploited. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised upgrade to 3.2.2 and 3.3.3 respectively. The mitigation against these vulnerabilities depends on the installation of the latest ModSecurity version (v2.9.6 / v3.0.8).

The OWASP ModSecurity Core Rule Set (CRS) is affected by a partial rule set bypass by submitting a specially crafted HTTP Content-Type header field that indicates multiple character encoding schemes. A vulnerable back-end can potentially be exploited by declaring multiple Content-Type "charset" names and therefore bypassing the configurable CRS Content-Type header "charset" allow list. An encoded payload can bypass CRS detection this way and may then be decoded by the backend. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised to upgrade to 3.2.2 and 3.3.3 respectively.

@keystone-6/core is a core package for Keystone 6, a content management system for Node.js. Starting with version 2.2.0 and prior to version 2.3.1, users who expected their `multiselect` fields to use the field-level access control - if configured - are vulnerable to their field-level access control not being used. List-level access control is not affected. Field-level access control for fields other than `multiselect` are not affected. Version 2.3.1 contains a fix for this issue. As a workaround, stop using the `multiselect` field.

Pebble Templates 3.1.5 allows attackers to bypass a protection mechanism and implement arbitrary code execution with springbok. NOTE: the vendor disputes this because input to the Pebble templating engine is intended to include arbitrary Java code, and thus either the input should not arrive from an untrusted source, or else the application using the engine should apply restrictions to the input. The engine is not responsible for validating the input.

An Incorrect Access Control issue in SAMPMAX com.sampmax.homemax 2.1.2.7 allows a remote attacker to obtain sensitive information via the firmware update process.

Incorrect access control in TOTOLINK N350RT V9.3.5u.6139_B20201216 allows attackers to obtain the apmib configuration file, which contains the username and the password, via a crafted request to /cgi-bin/ExportSettings.sh.

OpenFGA is an authorization/permission engine. OpenFGA v1.5.7 and v1.5.8 are vulnerable to authorization bypass when calling Check API with a model that uses `but not` and `from` expressions and a userset. Users should downgrade to v1.5.6 as soon as possible. This downgrade is backward compatible. As of time of publication, a patch is not available but OpenFGA's maintainers are planning a patch for inclusion in a future release.

Lylme Spage v1.9.5 is vulnerable to Incorrect Access Control. There is no limit on the number of login attempts, and the verification code will not be refreshed after a failed login, which allows attackers to blast the username and password and log into the system backend.

Meshtastic is an open source, off-grid, decentralized, mesh network. Meshtastic uses MQTT to communicate over an internet connection to a shared or private MQTT Server. Nodes can communicate directly via an internet connection or proxied through a connected phone (i.e., via bluetooth). Prior to version 2.5.1, multiple weaknesses in the MQTT implementation allow for authentication and authorization bypasses resulting in unauthorized control of MQTT-connected nodes. Version 2.5.1 contains a patch.

Money Manager EX WebApp (web-money-manager-ex) 1.2.2 is vulnerable to Incorrect Access Control. The `redirect_if_not_loggedin` function in `functions_security.php` fails to terminate script execution after redirecting unauthenticated users. This flaw allows an unauthenticated attacker to upload arbitrary files, potentially leading to Remote Code Execution.

In lunary-ai/lunary version v1.2.13, an incorrect authorization vulnerability exists that allows unauthorized users to access and manipulate projects within an organization they should not have access to. Specifically, the vulnerability is located in the `checkProjectAccess` method within the authorization middleware, which fails to adequately verify if a user has the correct permissions to access a specific project. Instead, it only checks if the user is part of the organization owning the project, overlooking the necessary check against the `account_project` table for explicit project access rights. This flaw enables attackers to gain complete control over all resources within a project, including the ability to create, update, read, and delete any resource, compromising the privacy and security of sensitive information.

app/Controller/UserLoginProfilesController.php in MISP before 2.4.198 does not prevent an org admin from viewing sensitive login fields of another org admin in the same org.

An access control issue in Ingredient Stock Management System v1.0 allows attackers to take over user accounts via a crafted POST request to /isms/classes/Users.php.

Zimbra Collaboration Open Source 8.8.15 does not encrypt the initial-login randomly created password (from the "zmprove ca" command). It is visible in cleartext on port UDP 514 (aka the syslog port). NOTE: a third party reports that this cannot be reproduced.

In MISP through 2.4.196, app/Controller/BookmarksController.php does not properly restrict access to bookmarks data in the case where the user is not an org admin.

Improper Authentication vulnerability in Apache Solr. Solr instances using the PKIAuthenticationPlugin, which is enabled by default when Solr Authentication is used, are vulnerable to Authentication bypass. A fake ending at the end of any Solr API URL path, will allow requests to skip Authentication while maintaining the API contract with the original URL Path. This fake ending looks like an unprotected API path, however it is stripped off internally after authentication but before API routing. This issue affects Apache Solr: from 5.3.0 before 8.11.4, from 9.0.0 before 9.7.0. Users are recommended to upgrade to version 9.7.0, or 8.11.4, which fix the issue.

Insecure permissions in fabedge v0.8.1 allows attackers to access sensitive data and escalate privileges by obtaining the service account's token.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-refresh-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

OpenFGA is a high-performance and flexible authorization/permission engine. Some end users of OpenFGA v1.5.0 or later are vulnerable to authorization bypass when calling Check or ListObjects APIs. You are very likely affected if your model involves exclusion (e.g. `a but not b`) or intersection (e.g. `a and b`). This vulnerability is fixed in v1.5.3.

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. In addition to running containers as build steps, BuildKit also provides APIs for running interactive containers based on built images. It was possible to use these APIs to ask BuildKit to run a container with elevated privileges. Normally, running such containers is only allowed if special `security.insecure` entitlement is enabled both by buildkitd configuration and allowed by the user initializing the build request. The issue has been fixed in v0.12.5 . Avoid using BuildKit frontends from untrusted sources.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-15854.

This vulnerability exists in Milesight 4K/H.265 Series NVR models (MS-Nxxxx-xxG, MS-Nxxxx-xxE, MS-Nxxxx-xxT, MS-Nxxxx-xxH and MS-Nxxxx-xxC), due to improper authorization at the Milesight NVR web-based management interface. A remote attacker could exploit this vulnerability by sending a specially crafted http requests on the targeted device. Successful exploitation of this vulnerability could allow remote attacker to perform unauthorized activities on the targeted device.

An issue was discovered in Poly EagleEye Director II before 2.2.2.1. Existence of a certain file (which can be created via an rsync backdoor) causes all API calls to execute as admin without authentication.

Improper access control in Citrix XenMobile Server 10.12 before RP3, Citrix XenMobile Server 10.11 before RP6, Citrix XenMobile Server 10.10 RP6 and Citrix XenMobile Server before 10.9 RP5 allows access to privileged functionality.

Incorrect Authorization vulnerability in Apache OFBiz. This issue affects Apache OFBiz: through 18.12.14. Users are recommended to upgrade to version 18.12.15, which fixes the issue. Unauthenticated endpoints could allow execution of screen rendering code of screens if some preconditions are met (such as when the screen definitions don't explicitly check user's permissions because they rely on the configuration of their endpoints).

The REST/JSON project 7.x-1.x for Drupal allows user registration bypass, aka SA-CONTRIB-2016-033. NOTE: This project is not covered by Drupal's security advisory policy.

The mod_auth_ldap and mod_auth_ldap2 Community Modules through 2020-01-27 for Prosody incompletely verify the XMPP address passed to the is_admin() function. This grants remote entities admin-only functionality if their username matches the username of a local admin.

An incorrect authorization vulnerability was identified in GitHub Enterprise Server, allowing for escalation of privileges in GraphQL API requests from GitHub Apps. This vulnerability allowed an app installed on an organization to gain access to and modify most organization-level resources that are not tied to a repository regardless of granted permissions, such as users and organization-wide projects. Resources associated with repositories were not impacted, such as repository file content, repository-specific projects, issues, or pull requests. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.7.1 and was fixed in versions 3.3.16, 3.4.11, 3.5.8, 3.6.4, 3.7.1. This vulnerability was reported via the GitHub Bug Bounty program.

Zoho ManageEngine SharePoint Manager Plus before 4329 allows account takeover because authorization is mishandled.

Mastodon before 3.3.2 and 3.4.x before 3.4.6 has incorrect access control because it does not compact incoming signed JSON-LD activities. (JSON-LD signing has been supported since version 1.6.0.)

** UNSUPPORTED WHEN ASSIGNED ** Incorrect Authorization vulnerability in Apache Submarine Server Core. This issue affects Apache Submarine Server Core: from 0.8.0. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Incorrect Authorization in GitHub repository tiann/kernelsu prior to v0.6.9.

Bareos is open source software for backup, archiving, and recovery of data for operating systems. When Bareos Director >= 18.2 >= 18.2 but prior to 21.1.0, 20.0.6, and 19.2.12 is built and configured for PAM authentication, it will skip authorization checks completely. Expired accounts and accounts with expired passwords can still login. This problem will affect users that have PAM enabled. Currently there is no authorization (e.g. check for expired or disabled accounts), but only plain authentication (i.e. check if username and password match). Bareos Director versions 21.1.0, 20.0.6 and 19.2.12 implement the authorization check that was previously missing. The only workaround is to make sure that authentication fails if the user is not authorized.

The Web3 WordPress plugin before 3.0.0 is vulnerable to an authentication bypass due to incorrect authentication checking in the login flow in functions 'handle_auth_request' and 'hadle_login_request'. This makes it possible for non authenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username.

A vulnerability has been discovered in Diño Physics School Assistant version 2.3. The vulnerability impacts an unidentified code within the file /classes/Users.php?f=save. Manipulating the argument id can result in improper authorization.

Nexkey is a lightweight fork of Misskey v12 optimized for small to medium size servers. Prior to 12.23Q4.5, Nexkey allows external apps using tokens issued by administrators and moderators to call admin APIs. This allows malicious third-party apps to perform operations such as updating server settings, as well as compromise object storage and email server credentials. This issue has been patched in 12.23Q4.5.

In spring security versions prior to 5.4.11+, 5.5.7+ , 5.6.4+ and older unsupported versions, RegexRequestMatcher can easily be misconfigured to be bypassed on some servlet containers. Applications using RegexRequestMatcher with `.` in the regular expression are possibly vulnerable to an authorization bypass.

A misconfiguration in the fingerprint authentication mechanism of Binance: BTC, Crypto and NFTS v2.85.4, allows attackers to bypass authentication when adding a new fingerprint.

Zulip is an open-source team collaboration tool with topic-based threading. Zulip Server version 2.0.0 and above are vulnerable to insufficient access control with multi-use invitations. A Zulip Server deployment which hosts multiple organizations is vulnerable to an attack where an invitation created in one organization (potentially as a role with elevated permissions) can be used to join any other organization. This bypasses any restrictions on required domains on users' email addresses, may be used to gain access to organizations which are only accessible by invitation, and may be used to gain access with elevated privileges. This issue has been patched in release 4.10. There are no known workarounds for this issue. ### Patches _Has the problem been patched? What versions should users upgrade to?_ ### Workarounds _Is there a way for users to fix or remediate the vulnerability without upgrading?_ ### References _Are there any links users can visit to find out more?_ ### For more information If you have any questions or comments about this advisory, you can discuss them on the [developer community Zulip server](https://zulip.com/developer-community/), or email the [Zulip security team](mailto:security@zulip.com).

Incorrect access control in the fingerprint authentication mechanism of Phone Cleaner: Boost & Clean v2.2.0 allows attackers to bypass fingerprint authentication due to the use of a deprecated API.

Improper Authentication vulnerability in Repute Infosystems BookingPress allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects BookingPress: from n/a through 1.0.74.

An issue has been discovered in GitLab EE affecting all versions starting from 13.12 before 16.2.7, all versions starting from 16.3 before 16.3.4. It was possible for an attacker to run pipeline jobs as an arbitrary user via scheduled security scan policies. This was a bypass of [CVE-2023-3932](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2023-3932) showing additional impact.