An issue in D3D Security D3D IP Camera (D8801) v.V9.1.17.1.4-20180428 allows a local attacker to execute arbitrary code via a crafted payload

Ezviz Internet PT Camera CS-CV246 D15655150 allows an unauthenticated host to access its live video stream by crafting a set of RTSP packets with a specific set of URLs that can be used to redirect the camera feed. NOTE: the vendor's perspective is that the Anonymous120386 sample code can establish RTSP protocol communictaion, but cannot obtain video or audio data; thus, there is no risk.

In certain EZVIZ products, two stack based buffer overflows in mulicast_parse_sadp_packet and mulicast_get_pack_type functions of the SADP multicast protocol can allow an unauthenticated attacker present on the same local network as the camera to achieve remote code execution. This affects CS-C6N-B0-1G2WF Firmware versions before V5.3.0 build 230215 and CS-C6N-R101-1G2WF Firmware versions before V5.3.0 build 230215 and CS-CV310-A0-1B2WFR Firmware versions before V5.3.0 build 230221 and CS-CV310-A0-1C2WFR-C Firmware versions before V5.3.2 build 230221 and CS-C6N-A0-1C2WFR-MUL Firmware versions before V5.3.2 build 230218 and CS-CV310-A0-3C2WFRL-1080p Firmware versions before V5.2.7 build 230302 and CS-CV310-A0-1C2WFR Wifi IP66 2.8mm 1080p Firmware versions before V5.3.2 build 230214 and CS-CV248-A0-32WMFR Firmware versions before V5.2.3 build 230217 and EZVIZ LC1C Firmware versions before V5.3.4 build 230214.

A stack-based buffer overflow vulnerability in Opto 22 PAC Control Basic and PAC Control Professional versions R10.0a and prior may allow remote code execution.

WECON Technology Co., Ltd. PI Studio HMI versions 4.1.9 and prior and PI Studio versions 4.2.34 and prior have a stack-based buffer overflow vulnerability which may allow remote code execution.

Advantech WebAccess 8.3.1 and earlier has several stack-based buffer overflow vulnerabilities that have been identified, which may allow an attacker to execute arbitrary code.

Multiple stack-based buffer overflow vulnerabilities [CWE-121] in the proxy daemon of FortiWeb 5.x all versions, 6.0.7 and below, 6.1.2 and below, 6.2.6 and below, 6.3.16 and below, 6.4 all versions may allow an unauthenticated remote attacker to achieve arbitrary code execution via specifically crafted HTTP requests.

In GnuPG before 2.5.17, a crafted CMS (S/MIME) EnvelopedData message carrying an oversized wrapped session key can cause a stack-based buffer overflow in gpg-agent during PKDECRYPT--kem=CMS handling. This can easily be leveraged for denial of service; however, there is also memory corruption that could lead to remote code execution.

Stack overflow in PJSUA API when calling pjsua_player_create. An attacker-controlled 'filename' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

Stack overflow in PJSUA API when calling pjsua_playlist_create. An attacker-controlled 'file_names' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

Stack overflow in PJSUA API when calling pjsua_recorder_create. An attacker-controlled 'filename' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

Zavio CF7500, CF7300, CF7201, CF7501, CB3211, CB3212, CB5220, CB6231, B8520, B8220, and CD321 IP Cameras with firmware version M2.1.6.05 are vulnerable to multiple instances of stack-based overflows. While processing XML elements from incoming network requests, the product does not sufficiently check or validate allocated buffer size. This may lead to remote code execution.

GStreamer is a library for constructing graphs of media-handling components. stack-buffer overflow has been detected in the gst_opus_dec_parse_header function within `gstopusdec.c'. The pos array is a stack-allocated buffer of size 64. If n_channels exceeds 64, the for loop will write beyond the boundaries of the pos array. The value written will always be GST_AUDIO_CHANNEL_POSITION_NONE. This bug allows to overwrite the EIP address allocated in the stack. This vulnerability is fixed in 1.24.10.

Tenda FH1201 v1.2.0.14 was discovered to contain a stack-based buffer overflow vulnerability via the entrys parameter at ip/goform/RouteStatic.

Shenzhen Libituo Technology Co., Ltd LBT-T300-T400 v3.2 was discovered to contain a stack overflow via the apn_name_3g parameter in the config_3g_para function.

A vulnerability in /goform/SetNetControlList in the sub_656BC function in Tenda AX1806 1.0.0.1 firmware leads to stack-based buffer overflow.

A vulnerability in /goform/SetVirtualServerCfg in the sub_6320C function in Tenda AX1806 1.0.0.1 firmware leads to stack-based buffer overflow.

Tenda FH1201 v1.2.0.14 was discovered to contain a stack-based buffer overflow vulnerability via the PPPOEPassword parameter at ip/goform/QuickIndex.

In Weintek's cMT3000 HMI Web CGI device, the cgi-bin command_wb.cgi contains a stack-based buffer overflow, which could allow an anonymous attacker to hijack control flow and bypass login authentication.

A stack buffer overflow vulnerability discovered in AsfSecureBootDxe in Insyde InsydeH2O with kernel 5.0 through 5.5 allows attackers to run arbitrary code execution during the DXE phase.

Zavio CF7500, CF7300, CF7201, CF7501, CB3211, CB3212, CB5220, CB6231, B8520, B8220, and CD321 IP Cameras with firmware version M2.1.6.05 are vulnerable to stack-based overflows. During the process of updating certain settings sent from incoming network requests, the product does not sufficiently check or validate allocated buffer size. This may lead to remote code execution.

A vulnerability classified as critical was found in Tenda AC500 2.0.1.9(1307). Affected by this vulnerability is the function formexeCommand of the file /goform/execCommand. The manipulation of the argument cmdinput leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-261145 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Stack-based buffer overflow vulnerabilities affecting Vonets industrial wifi bridge relays and wifi bridge repeaters, software versions 3.3.23.6.9 and prior, enable an unauthenticated remote attacker to execute arbitrary code.

GStreamer is a library for constructing graphs of media-handling components. A stack-buffer overflow has been detected in the `vorbis_handle_identification_packet` function within `gstvorbisdec.c`. The position array is a stack-allocated buffer of size 64. If vd->vi.channels exceeds 64, the for loop will write beyond the boundaries of the position array. The value written will always be `GST_AUDIO_CHANNEL_POSITION_NONE`. This vulnerability allows someone to overwrite the EIP address allocated in the stack. Additionally, this bug can overwrite the `GstAudioInfo` info structure. This vulnerability is fixed in 1.24.10.

A vulnerability was found in Tenda AC500 2.0.1.9(1307). It has been rated as critical. This issue affects the function formSetCfm of the file /goform/setcfm. The manipulation of the argument funcpara1 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261143. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Dahua products. Attackers can send carefully crafted data packets to the interface with vulnerabilities to initiate device initialization.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid in the function setWiFiBasicCfg

Domain Quester Pro 6.02 contains a stack overflow vulnerability that allows remote attackers to execute arbitrary code by overwriting Structured Exception Handler (SEH) registers. Attackers can craft a malicious payload targeting the 'Domain Name Keywords' input field to trigger an access violation and execute a bind shell on port 9999.

FTP Navigator 8.03 contains a stack overflow vulnerability that allows attackers to execute arbitrary code by overwriting Structured Exception Handler (SEH) registers. Attackers can craft a malicious payload that triggers a buffer overflow when pasted into the Custom Command textbox, enabling remote code execution and launching the calculator as proof of concept.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via the password parameter in function loginAuth .

AVEVA InduSoft Web Studio v8.1 and v8.1SP1, and InTouch Machine Edition v2017 8.1 and v2017 8.1 SP1 a remote user could send a carefully crafted packet to exploit a stack-based buffer overflow vulnerability during tag, alarm, or event related actions such as read and write, with potential for code to be executed.

Stack-based buffer overflow in SonicWall SMA100 allows an unauthenticated user to execute arbitrary code in function libSys.so. This vulnerability impacted SMA100 version 9.0.0.3 and earlier.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid in the function setWiFiEasyCfg.

An issue was discovered on Supermicro BMC firmware in select X11, X12, H12, B12, X13, H13, and B13 motherboards (and CMM6 modules). An unauthenticated user can post crafted data to the interface that triggers a stack buffer overflow, and may lead to arbitrary remote code execution on a BMC.

libcurl versions from 7.36.0 to before 7.64.0 are vulnerable to a stack-based buffer overflow. The function creating an outgoing NTLM type-3 header (`lib/vauth/ntlm.c:Curl_auth_create_ntlm_type3_message()`), generates the request HTTP header contents based on previously received data. The check that exists to prevent the local buffer from getting overflowed is implemented wrongly (using unsigned math) and as such it does not prevent the overflow from happening. This output data can grow larger than the local buffer if very large 'nt response' data is extracted from a previous NTLMv2 header provided by the malicious or broken HTTP server. Such a 'large value' needs to be around 1000 bytes or more. The actual payload data copied to the target buffer comes from the NTLMv2 type-2 response header.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to a stack buffer overflow via crafted HTTP POST request sent by a remote, unauthenticated attacker to /GponForm/fsetup_Form. An attacker can leverage this vulnerability to potentially execute arbitrary code.

A stack-based buffer overflow vulnerability exists in the touchlist_sync.cgi touchlistsync() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can send an HTTP request to trigger this vulnerability.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the adv.iptv.stbpvid parameter in the function formSetIptv.

Panda3D versions up to and including 1.10.16 egg-mkfont contains a stack-based buffer overflow vulnerability due to use of an unbounded sprintf() call with attacker-controlled input. When constructing glyph filenames, egg-mkfont formats a user-supplied glyph pattern (-gp) into a fixed-size stack buffer without length validation. Supplying an excessively long glyph pattern string can overflow the stack buffer, resulting in memory corruption and a deterministic crash. Depending on build configuration and execution environment, the overflow may also be exploitable for arbitrary code execution.

In Advantech DiagAnywhere Server, Versions 3.07.11 and prior, multiple stack-based buffer overflow vulnerabilities exist in the file transfer service listening on the TCP port. Successful exploitation could allow an unauthenticated attacker to execute arbitrary code with the privileges of the user running DiagAnywhere Server.

Improper length handling when parsing multiple cookie fields (including TRACKID) allows an unauthenticated remote attacker to send oversized cookie values and trigger a stack buffer overflow, resulting in a denial‑of‑service condition and possible remote code execution.

In all versions of libyang before 1.0-r5, a stack-based buffer overflow was discovered in the way libyang parses YANG files with a leaf of type "bits". An application that uses libyang to parse untrusted YANG files may be vulnerable to this flaw, which would allow an attacker to cause a denial of service or possibly gain code execution.

A vulnerability classified as critical was found in Tenda AC10U 15.03.06.49_multi_TDE01. Affected by this vulnerability is the function formQuickIndex. The manipulation of the argument PPPOEPassword leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252127. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a stack overflow via the File parameter in the function UploadCustomModule.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a stack overflow via the http_host parameter in the function loginAuth.

Potential buffer overflow vulnerability in the Zephyr CAN bus subsystem