An authentication bypass exists in the web management interface in Belkin F5D8236-4 v2.

A flaw was found in Red Hat DataGrid 8.x (8.0.0, 8.0.1, 8.1.0 and 8.1.1) and Infinispan (10.0.0 through 12.0.0). An attacker could bypass authentication on all REST endpoints when DIGEST is used as the authentication method. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

After Automation Direct CLICK PLC CPU Modules: C0-1x CPUs with firmware prior to v3.00 is unlocked by an authorized user, the unlocked state does not timeout. If the programming software is interrupted, the PLC remains unlocked. All subsequent programming connections are allowed without authorization. The PLC is only relocked by a power cycle, or when the programming software disconnects correctly.

A vulnerability has been identified in TIM 1531 IRC (All versions < V1.1). A remote attacker with network access to port 80/tcp or port 443/tcp could perform administrative operations on the device without prior authentication. Successful exploitation could allow to cause a denial-of-service, or read and manipulate data as well as configuration settings of the affected device. At the stage of publishing this security advisory no public exploitation is known. Siemens provides mitigations to resolve it.

Remote code execution vulnerability due to insufficient user privilege verification in reverseWall-MDS. Remote attackers can exploit the vulnerability such as stealing account, through remote code execution.

The Email Verification, Email OTP, Block Spam Email, Passwordless login, Hide Login, Magic Login – User Verification plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 2.0.39. This is due to the plugin not properly validating that an OTP was generated before comparing it to user input in the "user_verification_form_wrap_process_otpLogin" function. This makes it possible for unauthenticated attackers to log in as any user with a verified email address, such as an administrator, by submitting an empty OTP value.

Improper host authentication vulnerability in wolfSSH version 1.4.20 and earlier clients that allows authentication bypass and leaking of clients credentials.

The file upload wizard in Zengenti Contensis Classic before 15.2.1.79 does not correctly check that a user has authenticated. By uploading a crafted aspx file, it is possible to execute arbitrary commands.

X-Pack Security versions 6.2.0, 6.2.1, and 6.2.2 are vulnerable to a user impersonation attack via incorrect XML canonicalization and DOM traversal. An attacker might have been able to impersonate a legitimate user if the SAML Identity Provider allows for self registration with arbitrary identifiers and the attacker can register an account which an identifier that shares a suffix with a legitimate account. Both of those conditions must be true in order to exploit this flaw.

All programming connections receive the same unlocked privileges, which can result in a privilege escalation. During the time Automation Direct CLICK PLC CPU Modules: C0-1x CPUs with firmware prior to v3.00 is unlocked by an authorized user, an attacker can connect to the PLC and read the project without authorization.

A flaw has been found in 70mai X200 up to 20251010. Affected is an unknown function of the component Pairing. Executing manipulation can lead to missing authentication. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The Search & Go - Directory WordPress Theme theme for WordPress is vulnerable to Authentication Bypass via account takeover in all versions up to, and including, 2.7. This is due to insufficient user validation in the search_and_go_elated_check_facebook_user() function This makes it possible for unauthenticated attackers to gain access to other user's accounts, including administrators, when Facebook login is enabled.

YMS VIS Pro is an information system for veterinary and food administration, veterinarians and farm. Due to a combination of improper method for system credentials generation and weak password policy, passwords can be easily guessed and enumerated through brute force attacks. Successful attacks can lead to unauthorised access and execution of operations based on assigned user permissions. This vulnerability affects VIS Pro in versions <= 3.3.0.6. This vulnerability has been mitigated by changes in authentication mechanisms and implementation of additional authentication layer and strong password policies.

An authentication bypass by assumed-immutable data vulnerability [CWE-302] in the FortiOS SSH login component 7.2.0, 7.0.0 through 7.0.7, 6.4.0 through 6.4.9, 6.2 all versions, 6.0 all versions and FortiProxy SSH login component 7.0.0 through 7.0.5, 2.0.0 through 2.0.10, 1.2.0 all versions may allow a remote and unauthenticated attacker to login into the device via sending specially crafted Access-Challenge response from the Radius server.

D-Link DIR-822 C1 before v3.11B01Beta, DIR-822-US C1 before v3.11B01Beta, DIR-850L A* before v1.21B08Beta, DIR-850L B* before v2.22B03Beta, and DIR-880L A* before v1.20B02Beta devices allow authentication bypass.

Delta Electronics DIAEnergie Version 1.7.5 and prior may allow an attacker to add a new administrative user without being authenticated or authorized, which may allow the attacker to log in and use the device with administrative privileges.

Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.13, 20.011, and 21.0.3, webauthn tokens were not deleted after a user has been deleted. If a victim reused an earlier used username, the previous user could gain access to their account. The issue was fixed in versions 19.0.13, 20.0.11, and 21.0.3. There are no known workarounds.

A vulnerability was found in ProjectsAndPrograms School Management System up to 6b6fae5426044f89c08d0dd101c7fa71f9042a59. This affects an unknown part. Performing manipulation results in missing authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. This product adopts a rolling release strategy to maintain continuous delivery

Caddy before 0.10.13 mishandles TLS client authentication, as demonstrated by an authentication bypass caused by the lack of the StrictHostMatching mode.

An issue was discovered on Samsung mobile devices with N(7.x) software. The Secure Folder app's startup logic allows authentication bypass. The Samsung ID is SVE-2018-11628 (December 2018).

A vulnerability was identified in samanhappy MCPHub up to 0.9.10. This vulnerability affects the function handleSseConnectionfunction of the file src/services/sseService.ts. Such manipulation leads to improper authentication. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

Apollos Apps is an open source platform for launching church-related apps. In Apollos Apps versions prior to 2.20.0, new user registrations are able to access anyone's account by only knowing their basic profile information (name, birthday, gender, etc). This includes all app functionality within the app, as well as any authenticated links to Rock-based webpages (such as giving and events). There is a patch in version 2.20.0. As a workaround, one can patch one's server by overriding the `create` data source method on the `People` class.

Logsign Unified SecOps Platform Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of Logsign Unified SecOps Platform. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 443 by default. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-25336.

Broken Authentication vulnerability in yotuwp Video Gallery plugin <= 1.3.4.5 at WordPress.

A vulnerability has been found in D-Link DHP-W310AV 1.04 and classified as critical. This vulnerability affects unknown code. The manipulation leads to authentication bypass by spoofing. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Automation Direct CLICK PLC CPU Modules: C0-1x CPUs with firmware prior to v3.00 does not protect against additional software programming connections. An attacker can connect to the PLC while an existing connection is already active.

The OwnID Passwordless Login plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.3.4. This is due to the plugin not properly checking if the ownid_shared_secret value is empty prior to authenticating a user via JWT. This makes it possible for unauthenticated attackers to log in as other users, including administrators, on instances where the plugin has not been fully configured yet.

This vulnerability allows remote attackers to bypass authentication on affected installations of Inductive Automation Ignition 8.1.15 (b2022030114). Authentication is not required to exploit this vulnerability. The specific flaw exists within com.inductiveautomation.ignition.gateway.web.pages. The issue results from the lack of proper authentication prior to access to functionality. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-17211.

The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

The Registration & Login with Mobile Phone Number for WooCommerce plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.3.1. This is due to the plugin not properly verifying a users identity prior to authenticating them via the fma_lwp_set_session_php_fun() function. This makes it possible for unauthenticated attackers to authenticate as any user on the site, including administrators, without a valid password.

SmarterTools SmarterMail versions prior to build 9511 contain an authentication bypass vulnerability in the password reset API. The force-reset-password endpoint permits anonymous requests and fails to verify the existing password or a reset token when resetting system administrator accounts. An unauthenticated attacker can supply a target administrator username and a new password to reset the account, resulting in full administrative compromise of the SmarterMail instance. NOTE: SmarterMail system administrator privileges grant the ability to execute operating system commands via built-in management functionality, effectively providing administrative (SYSTEM or root) access on the underlying host.

The administrator application on ASUS GT-AC2900 devices before 3.0.0.4.386.42643 and Lyra Mini before 3.0.0.4_384_46630 allows authentication bypass when processing remote input from an unauthenticated user, leading to unauthorized access to the administrator interface. This relates to handle_request in router/httpd/httpd.c and auth_check in web_hook.o. An attacker-supplied value of '\0' matches the device's default value of '\0' in some situations. Note: All versions of Lyra Mini and earlier which are unsupported (End-of-Life, EOL) are also affected by this vulnerability, Consumers can mitigate this vulnerability by disabling the remote access features from WAN.

FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. Prior to 1.2.10, an authentication bypass vulnerability in FUXA allows an unauthenticated, remote attacker to gain administrative access via the heartbeat refresh API and execute arbitrary code on the server. This issue has been patched in FUXA version 1.2.10.

Some Dahua products have access control vulnerability in the password reset process. Attackers can exploit this vulnerability through specific deployments to reset device passwords.

The tagDiv Composer WordPress plugin before 3.5, required by the Newspaper WordPress theme before 12.1 and Newsmag WordPress theme before 5.2.2, does not properly implement the Facebook login feature, allowing unauthenticated attackers to login as any user by just knowing their email address

The usage of an internal HTTP header created an authentication bypass vulnerability (CWE-287), allowing an attacker to view internal files, change settings, manipulate services and execute arbitrary code. This issue affects all Juniper Networks 128 Technology Session Smart Router versions prior to 4.5.11, and all versions of 5.0 up to and including 5.0.1.

An Authentication Bypass Using an Alternate Path or Channel vulnerability [CWE-288] vulnerability in Fortinet FortiAnalyzer 7.6.0 through 7.6.5, FortiAnalyzer 7.4.0 through 7.4.9, FortiAnalyzer 7.2.0 through 7.2.11, FortiAnalyzer 7.0.0 through 7.0.15, FortiManager 7.6.0 through 7.6.5, FortiManager 7.4.0 through 7.4.9, FortiManager 7.2.0 through 7.2.11, FortiManager 7.0.0 through 7.0.15, FortiOS 7.6.0 through 7.6.5, FortiOS 7.4.0 through 7.4.10, FortiOS 7.2.0 through 7.2.12, FortiOS 7.0.0 through 7.0.18, FortiProxy 7.6.0 through 7.6.4, FortiProxy 7.4.0 through 7.4.12, FortiProxy 7.2.0 through 7.2.15, FortiProxy 7.0.0 through 7.0.22, FortiWeb 8.0.0 through 8.0.3, FortiWeb 7.6.0 through 7.6.6, FortiWeb 7.4.0 through 7.4.11 may allow an attacker with a FortiCloud account and a registered device to log into other devices registered to other accounts, if FortiCloud SSO authentication is enabled on those devices.

The Nextend Social Login Pro plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 3.1.16. This is due to insufficient verification on the user being supplied during the Apple OAuth authenticate request through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.

METIS WIC devices (versions <= oscore 2.1.234-r18) expose a web-based shell at the /console endpoint that does not require authentication. Accessing this endpoint allows a remote attacker to execute arbitrary operating system commands with root (UID 0) privileges. This results in full system compromise, allowing unauthorized access to modify system configuration, read sensitive data, or disrupt device operations

METIS DFS devices (versions <= oscore 2.1.234-r18) expose a web-based shell at the /console endpoint that does not require authentication. Accessing this endpoint allows a remote attacker to execute arbitrary operating system commands with 'daemon' privileges. This results in the compromise of the software, granting unauthorized access to modify configuration, read and alter sensitive data, or disrupt services.

The vulnerability exists in BLUVOYIX due to improper authentication in the BLUVOYIX backend APIs. An unauthenticated remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable APIs. Successful exploitation of this vulnerability could allow the attacker to gain full access to customers' data and completely compromise the targeted platform.

ZimaOS is a fork of CasaOS, an operating system for Zima devices and x86-64 systems with UEFI. In versions up to and including 1.5.0, the application checks the validity of the username but appears to skip, misinterpret, or incorrectly validate the password when the provided username matches a known system service account. The application's login function fails to properly handle the password validation result for these users, effectively granting authenticated access to anyone who knows one of these common usernames and provides any password. As of time of publication, no known patched versions are available.

The WP Foodbakery plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 4.7. This is due to the plugin not properly validating a user's identity prior to setting the current user and their authentication cookie. This makes it possible for unauthenticated attackers to gain access to a target user's (e.g. administrators) account.

The Tarkov Data Manager is a tool to manage the Tarkov item data. Prior to 02 January 2025, an authentication bypass vulnerability in the login endpoint allows any unauthenticated user to gain full admin access to the Tarkov Data Manager admin panel by exploiting a JavaScript prototype property access vulnerability, combined with loose equality type coercion. A series of fix commits on 02 January 2025 fixed this and other vulnerabilities.

BookWyrm is a social network for tracking reading. Versions prior to 0.4.5 were found to lack rate limiting on authentication views which allows brute-force attacks. This issue has been patched in version 0.4.5. Admins with existing instances will need to update their `nginx.conf` file that was created when the instance was set up. Users are advised advised to upgrade. Users unable to upgrade may update their nginx.conf files with the changes manually.

Agentflow developed by Flowring has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to read, modify, and delete database contents by using a specific functionality.

A security flaw has been discovered in code-projects Contact Management System 1.0. This affects an unknown part of the component CRUD Endpoint. The manipulation of the argument ID results in improper authentication. The attack may be launched remotely.

An authentication bypass in telnet server in BF-430 and BF431 232/422 TCP/IP Converter, BF-450M and SEMAC from CHIYU Technology Inc allows obtaining a privileged connection with the target device by supplying a specially malformed request and an attacker may force the remote telnet server to believe that the user has already authenticated.

The client in OpenSSH before 7.2 mishandles failed cookie generation for untrusted X11 forwarding and relies on the local X11 server for access-control decisions, which allows remote X11 clients to trigger a fallback and obtain trusted X11 forwarding privileges by leveraging configuration issues on this X11 server, as demonstrated by lack of the SECURITY extension on this X11 server.