stb_truetype.h v1.26 was discovered to contain a heap-buffer-overflow via the function stbtt__find_table at stb_truetype.h. NOTE: Third party has disputed stating that the source code has also a disclaimer that it should only be used with trusted input.

stb_truetype.h v1.26 was discovered to contain a heap-buffer-overflow via the function ttULONG() at stb_truetype.h. NOTE: Third party has disputed stating that the source code has also a disclaimer that it should only be used with trusted input.

A vulnerability was found in Nothings stb up to 1.26. Impacted is the function stbtt_InitFont_internal in the library stb_truetype.h of the component TTF File Handler. Performing a manipulation results in out-of-bounds read. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Nothings stb up to 1.22. The impacted element is the function setup_free of the file stb_vorbis.c. The manipulation leads to allocation of resources. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Nothings stb up to 1.26. The affected element is the function stbtt__buf_get8 in the library stb_truetype.h of the component TTF File Handler. Executing a manipulation can lead to out-of-bounds read. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

stb_image is a single file MIT licensed library for processing images. If `stbi__load_gif_main` in `stbi_load_gif_from_memory` fails it returns a null pointer and may keep the `z` variable uninitialized. In case the caller also sets the flip vertically flag, it continues and calls `stbi__vertical_flip_slices` with the null pointer result value and the uninitialized `z` value. This may result in a program crash.

An issue was discovered in stb stb_image.h 2.27. The PNM loader incorrectly interpreted 16-bit PGM files as 8-bit when converting to RGBA, leading to a buffer overflow when later reinterpreting the result as a 16-bit buffer. An attacker could potentially have crashed a service using stb_image, or read up to 1024 bytes of non-consecutive heap data without control over the read location.

stb_vorbis is a single file MIT licensed library for processing ogg vorbis files. A crafted file may trigger out of bounds write in `f->vendor[i] = get8_packet(f);`. The root cause is an integer overflow in `setup_malloc`. A sufficiently large value in the variable `sz` overflows with `sz+7` in and the negative value passes the maximum available memory buffer check. This issue may lead to code execution.

stb_vorbis is a single file MIT licensed library for processing ogg vorbis files. A crafted file may trigger out of buffer write in `start_decoder` because at maximum `m->submaps` can be 16 but `submap_floor` and `submap_residue` are declared as arrays of 15 elements. This issue may lead to code execution.

stb_vorbis is a single file MIT licensed library for processing ogg vorbis files. A crafted file may trigger out of bounds write in `f->vendor[len] = (char)'\0';`. The root cause is that if `len` read in `start_decoder` is a negative number and `setup_malloc` successfully allocates memory in that case, but memory write is done with a negative index `len`. Similarly if len is INT_MAX the integer overflow len+1 happens in `f->vendor = (char*)setup_malloc(f, sizeof(char) * (len+1));` and `f->comment_list[i] = (char*)setup_malloc(f, sizeof(char) * (len+1));`. This issue may lead to code execution.

stb stb_image.h 2.19, as used in catimg, Emscripten, and other products, has a heap-based buffer overflow in the stbi__out_gif_code function.

A security flaw has been discovered in Nothings stb up to 1.22. This affects the function start_decoder of the file stb_vorbis.c. The manipulation results in out-of-bounds write. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A heap-based buffer overflow vulnerability exists in the comment functionality of stb _vorbis.c v1.22. A specially crafted .ogg file can lead to an out-of-bounds write. An attacker can provide a malicious file to trigger this vulnerability.

stb_vorbis is a single file MIT licensed library for processing ogg vorbis files. A crafted file may trigger memory write past an allocated heap buffer in `start_decoder`. The root cause is a potential integer overflow in `sizeof(char*) * (f->comment_list_length)` which may make `setup_malloc` allocate less memory than required. Since there is another integer overflow an attacker may overflow it too to force `setup_malloc` to return 0 and make the exploit more reliable. This issue may lead to code execution.

stb_vorbis is a single file MIT licensed library for processing ogg vorbis files. A crafted file may trigger out of bounds write in `f->vendor[len] = (char)'\0';`. The root cause is that if the len read in `start_decoder` is `-1` and `len + 1` becomes 0 when passed to `setup_malloc`. The `setup_malloc` behaves differently when `f->alloc.alloc_buffer` is pre-allocated. Instead of returning `NULL` as in `malloc` case it shifts the pre-allocated buffer by zero and returns the currently available memory block. This issue may lead to code execution.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the name and mem parameters in the /time_group.asp endpoint.

igmpproxy 0.4 before commit 2b30c36 allows remote attackers to cause a denial of service (application crash) via a crafted IGMPv3 membership report packet with a malicious source address. Due to insufficient validation in the `recv_igmp()` function in src/igmpproxy.c, an invalid group record type can trigger a NULL pointer dereference when logging the address using `inet_fmtsrc()`. This vulnerability can be exploited by sending malformed multicast traffic to a host running igmpproxy, leading to a crash. igmpproxy is used in various embedded networking environments and consumer-grade IoT devices (such as home routers and media gateways) to handle multicast traffic for IPTV and other streaming services. Affected devices that rely on unpatched versions of igmpproxy may be vulnerable to remote denial-of-service attacks across a LAN .

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to inadequate validation of input size in the routes_static parameter in the /router.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to insufficient input validation on the name parameter in the /qos_type_asp.asp endpoint.

Tenda AC6 v15.03.05.16_multi is vulnerable to Buffer Overflow in the formSetQosBand function via the list parameter.

A buffer overflow vulnerability has been discovered in Netis WF2880 v2.1.40207 in the FUN_00475e1c function of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of wds_key_wep in the payload, which can cause the program to crash and potentially lead to a Denial of Service (DoS) attack.

A buffer overflow vulnerability has been discovered in Netis WF2880 v2.1.40207 in the Function_00465620 of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of specify_parame in the payload, which can cause the program to crash and potentially lead to a Denial of Service (DoS) attack.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the iface parameter in the /wan_line_detection.asp endpoint.

Backup Key Recovery 2.2.7 contains a denial of service vulnerability that allows attackers to crash the application by overflowing the registration code input field. Attackers can paste a large buffer of 256 repeated characters into the registration key field to trigger application instability and potential crash.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper validation of user input in the qj.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 and DI-8003G 19.12.10A1 due to improper handling of the wan_ping parameter in the /wan_ping.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the s parameter in the /web_list_opt.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the http_lanport parameter in the /webgl.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper validation of the id parameter in the /thd_member.asp endpoint.

This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to insufficient validation of user supplied input for the Add Downstream Frequency parameter at its web interface. A remote attacker could exploit this vulnerability by supplying specially crafted input to the parameter at the web interface of the vulnerable targeted system. Successful exploitation of this vulnerability could allow the attacker to perform a Denial of Service (DoS) attack on the targeted system.

A buffer overflow vulnerability has been discovered in the Netis WF2880 v2.1.40207 in the FUN_0047151c function of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of wds_set in the payload, which can cause the program to crash and potentially lead to a Denial of Service (DoS) attack.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper input validation in the vlan_name parameter in the /shut_set.asp endpoint.

A buffer overflow vulnerability has been discovered in Netis WF2880 v2.1.40207 in the FUN_00476598 function of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of wl_base_set_5g in the payload, which can cause the program to crash and potentially lead to a Denial of Service (DoS) attack.

A buffer overflow vulnerability has been discovered in Netis WF2880 v2.1.40207 in the FUN_0046f984 function of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of wl_advanced_set in the payload, which can cause the program to crash and lead to a Denial of Service (DoS) attack.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of input parameters in the /web_keyword.asp endpoint. An attacker can exploit this vulnerability by sending a crafted HTTP GET request via the name, en, time, mem_gb2312, and mem_utf8 parameters.

The HC.Server service in Hosting Controller HC10 10.14 allows an Invalid Pointer Write DoS.

NBMonitor 1.6.8 contains a denial of service vulnerability that allows attackers to crash the application by overflowing the registration code input field. Attackers can paste a 256-character buffer into the registration key field to trigger an application crash and potential system instability.

An issue was discovered in Qt before 5.15.15, 6.x before 6.2.9, and 6.3.x through 6.5.x before 6.5.1. When a SVG file with an image inside it is rendered, a QTextLayout buffer overflow can be triggered.

A maliciously crafted favicon could have led to an out of memory crash. This vulnerability affects Firefox < 113.

radare2 through 3.5.1 mishandles the RParse API, which allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact, as demonstrated by newstr buffer overflows during replace operations. This affects libr/asm/asm.c and libr/parse/parse.c.

An issue was discovered in the vec-const crate before 2.0.0 for Rust. It tries to construct a Vec from a pointer to a const slice, leading to memory corruption.

An issue was discovered in the derive-com-impl crate before 0.1.2 for Rust. An invalid reference (and memory corruption) can occur because AddRef might not be called before returning a pointer.

Buffer overflow vulnerability in the codec module Impact: Successful exploitation of this vulnerability may affect availability.

Tenda AX12 v22.03.01.21 was discovered to contain a stack buffer overflow in the function sub_422CE4. This vulnerability allows attackers to cause a Denial of Service (DoS) via the strcpy parameter.

Buffer Overflow vulnerability in PX4-Autopilot allows attackers to cause a denial of service via handler function handling msgid 332.

In SAP PowerDesigner (Proxy) - version 16.7, an attacker can send a crafted request from a remote host to the proxy machine and crash the proxy server, due to faulty implementation of memory management causing a memory corruption. This leads to a high impact on availability of the application.

jq is a command-line JSON processor. In versions up to and including 1.7.1, a heap-buffer-overflow is present in function `jv_string_vfmt` in the jq_fuzz_execute harness from oss-fuzz. This crash happens on file jv.c, line 1456 `void* p = malloc(sz);`. As of time of publication, no patched versions are available.

The video framework has memory overwriting caused by addition overflow. Successful exploitation of this vulnerability may affect availability.

A buffer overflow vulnerability has been discovered in the Netis WF2880 v2.1.40207 in the FUN_004743f8 function of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of wl_sec_set in the payload, which may cause the program to crash and potentially lead to a Denial of Service (DoS) attack.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a stack overflow in the function formIPMacBindModify. This vulnerability allows attackers to cause a Denial of Service (DoS) via the IPMacBindRuleIP and IPMacBindRuleMac parameters.