A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been declared as critical. This vulnerability affects the function cgi_FMT_R5_SpareDsk_DiskMGR of the file /cgi-bin/hd_config.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_source_dev leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the webwlanidx parameter in /setting/setWebWlanIdx.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814 and classified as critical. Affected by this issue is the function cgi_audio_search/cgi_create_playlist/cgi_get_album_all_tracks/cgi_get_alltracks_editlist/cgi_get_artist_all_album/cgi_get_genre_all_tracks/cgi_get_tracks_list/cgi_set_airplay_content/cgi_write_playlist of the file /cgi-bin/myMusic.cgi. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability was found in TOTOLINK AC1200 T8 4.1.5cu.862_B20230228. It has been classified as critical. This affects the function setTracerouteCfg. The manipulation leads to os command injection. It is possible to initiate the attack remotely. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Command Injection in Tenda G0 routers with firmware versions v15.11.0.6(9039)_CN and v15.11.0.5(5876)_CN , and Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted action/setDebugCfg request. This occurs because the "formSetDebugCfg" function executes glibc's system function with untrusted input.

A vulnerability was found in F-logic DataCube3 1.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /admin/config_time_sync.php of the component HTTP POST Request Handler. The manipulation of the argument ntp_server leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-272347.

OS Command injection vulnerability in D-Link DIR820LA1_FW105B03 allows attackers to escalate privileges to root via a crafted payload.

A vulnerability, which was classified as critical, was found in Ruijie RG-UAC 1.0. This affects an unknown part of the file /view/userAuthentication/SSO/commit.php. The manipulation of the argument ad_log_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-269157 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

**UNSUPPORTED WHEN ASSIGNED** A command injection vulnerability in the export-cgi program of Zyxel NAS326 firmware versions through V5.21(AAZF.18)C0 and NAS542 firmware versions through V5.21(ABAG.15)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands by sending a crafted HTTP POST request.

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/addRouting route. This could lead to Command Injection via Shell Metacharacters.

processCommandSetUid() in libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

An OS command injection was found in SecuwaySSL, when special characters injection on execute command with runCommand arguments.

A vulnerability classified as critical was found in Ruijie RG-UAC 1.0. Affected by this vulnerability is an unknown functionality of the file /view/systemConfig/reboot/reboot_commit.php. The manipulation of the argument servicename leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-269155. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Fusionpbx v4.4 and below contains a command injection vulnerability via the download email logs function.

Command Injection in Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted "action/umountUSBPartition" request. This occurs because the "formSetUSBPartitionUmount" function executes the "doSystemCmd" function with untrusted input.

Command Injection in TOTOLINK X5000R router with firmware v9.1.0u.6118_B20201102, and TOTOLINK A720R router with firmware v4.1.5cu.470_B20200911 allows remote attackers to execute arbitrary OS commands by sending a modified HTTP request. This occurs because the function executes glibc's system function with untrusted input. In the function, "ip" parameter is directly passed to the attacker, allowing them to control the "ip" field to attack the OS.

Commands can be injected over the network and executed without authentication.

Command Injection in TOTOLINK X5000R router with firmware v9.1.0u.6118_B20201102, and TOTOLINK A720R router with firmware v4.1.5cu.470_B20200911 allows remote attackers to execute arbitrary OS commands by sending a modified HTTP request. This occurs because the function executes glibc's system function with untrusted input. In the function, "command" parameter is directly passed to the attacker, allowing them to control the "command" field to attack the OS.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the devname parameter in the reset_wifi function.

An OS Command Injection vulnerability was found in /landrecordsys/admin/dashboard.php in PHPGurukul Land Record System v1.0, which allows remote attackers to execute arbitrary code via the "Cookie" GET request parameter.

A command injection issue in Palo Alto Networks Cortex XSOAR CommonScripts Pack allows an unauthenticated attacker to execute arbitrary commands within the context of an integration container.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the iface parameter in the vif_enable function.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pbc_wps function.

Certain EOL GeoVision devices fail to properly filter user input for the specific functionality. Unauthenticated remote attackers can exploit this vulnerability to inject and execute arbitrary system commands on the device.

TOTOLink outdoor CPE CP900 V6.3c.566_B20171026 contains a command injection vulnerability in the NTPSyncWithHost function via the host_name parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Possible Command Injection in iManager GET parameter has been discovered in OpenText™ iManager 3.2.6.0000.

Unauthenticated remote code execution occurs in D-Link products such as DIR-655C, DIR-866L, DIR-652, and DHP-1565. The issue occurs when the attacker sends an arbitrary input to a "PingTest" device common gateway interface that could lead to common injection. An attacker who successfully triggers the command injection could achieve full system compromise. Later, it was independently found that these are also affected: DIR-855L, DAP-1533, DIR-862L, DIR-615, DIR-835, and DIR-825.

In Cleo Harmony before 5.8.0.24, VLTrader before 5.8.0.24, and LexiCom before 5.8.0.24, an unauthenticated user can import and execute arbitrary Bash or PowerShell commands on the host system by leveraging the default settings of the Autorun directory.

broccoli-compass v0.2.4 was discovered to contain a remote code execution (RCE) vulnerability via the child_process function.

The web services of Softnext's products, Mail SQR Expert and Mail Archiving Expert do not properly validate user input, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the remote server.

SNMP objects in NET-SNMP used in ORing IAP-420 allows Command Injection. This issue affects IAP-420: through 2.01e.

A remote code execution vulnerability in the PAN-OS SSH device management interface that can lead to unauthenticated remote users with network access to the SSH management interface gaining root access to PAN-OS. This issue affects PAN-OS 7.1 versions prior to 7.1.24-h1, 7.1.25; 8.0 versions prior to 8.0.19-h1, 8.0.20; 8.1 versions prior to 8.1.9-h4, 8.1.10; 9.0 versions prior to 9.0.3-h3, 9.0.4.

git-fastclone before 1.0.5 passes user modifiable strings directly to a shell command. An attacker can execute malicious commands by modifying the strings that are passed as arguments to "cd " and "git clone " commands in the library.

The eslint-fixer package through 0.1.5 for Node.js allows command injection via shell metacharacters to the fix function. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. The ozum/eslint-fixer GitHub repository has been intentionally deleted

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /goform/setWorkmode.

Command injection vulnerability in China Mobile An Lianbao WF-1 1.01 via the 'ip' parameter with a POST request to /api/ZRQos/set_online_client.

In Netgear WNR854T 1.5.2 (North America), the UPNP service (/usr/sbin/upnp) is vulnerable to stack-based buffer overflow in the M-SEARCH Host header.

SeaCMS <=13.0 is vulnerable to command execution in phome.php via the function Ebak_RepPathFiletext().

Totolink routers s X5000R V9.1.0u.6118_B20201102 and A7000R V9.1.0u.6115_B20201022 were discovered to contain a command injection vulnerability in the Tunnel 6rd function via the relay6rd parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Arris routers SBR-AC1900P 1.0.7-B05, SBR-AC3200P 1.0.7-B05 and SBR-AC1200P 1.0.5-B05 were discovered to contain a command injection vulnerability in the pptp function via the pptpUserName and pptpPassword parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

TOTOLINK T6 V4.1.5cu.709_B20210518 is vulnerable to command injection via cstecgi.cgi

Totolink routers s X5000R V9.1.0u.6118_B20201102 and A7000R V9.1.0u.6115_B20201022 were discovered to contain a command injection vulnerability in the Tunnel 6in4 function via the remote6in4 parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

In TOTOLINK X6000R V9.4.0cu.1041_B20240224 in the shttpd file, the Uci_Set Str function is used without strict parameter filtering. An attacker can achieve arbitrary command execution by constructing the payload.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagPingSize parameter in the setNetworkDiag function.

Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /cgi-bin/uploadAccessCodePic.

TOTOLink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability.

The login_mgr.cgi script in D-Link DNS-320 through 2.05.B10 is vulnerable to remote command injection.

A vulnerability, which was classified as critical, has been found in anji-plus AJ-Report up to 1.4.1. This issue affects the function IGroovyHandler. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-266267.

LLama Factory enables fine-tuning of large language models. A critical remote OS command injection vulnerability has been identified in the LLama Factory training process. This vulnerability arises from improper handling of user input, allowing malicious actors to execute arbitrary OS commands on the host system. The issue is caused by insecure usage of the `Popen` function with `shell=True`, coupled with unsanitized user input. Immediate remediation is required to mitigate the risk. This vulnerability is fixed in 0.9.1.