Authentication Bypass via Hardcoded Credentials GoAway up to v0.62.18, fixed in 0.62.19, uses a hardcoded secret for signing JWT tokens used for authentication.

A weak default administrator password for the web interface and serial port was reported in some Lenovo Personal Cloud Storage devices that could allow unauthorized device access to an attacker with physical or local network access.

D-Link DIR-300 REVA FIRMWARE v1.06B05_WW contains hardcoded credentials in the Telnet service.

ZWX-2000CSW2-HN firmware versions prior to Ver.0.3.15 uses hard-coded credentials, which may allow a network-adjacent attacker with an administrative privilege to alter the configuration of the device.

ColdFusion versions 2025.2, 2023.14, 2021.20 and earlier are affected by a Use of Hard-coded Credentials vulnerability that could result in privilege escalation. An attacker could leverage this vulnerability to gain unauthorized access to sensitive systems or data. Exploitation of this issue does not require user interaction. The vulnerable component is restricted to internal IP addresses.

Contec FXA3200 version 1.13 and under were discovered to contain a hard coded hash password for root stored in the component /etc/shadow. As the password strength is weak, it can be cracked in few minutes. Through this credential, a malicious actor can access the Wireless LAN Manager interface and open the telnet port then sniff the traffic or inject any malware.

Owl Labs Meeting Owl 5.2.0.15 allows attackers to control the device via a backdoor password (derived from the serial number) that can be found in Bluetooth broadcast data.

MA Lighting grandMA2 Light has a password of root for the root account. NOTE: The vendor's position is that the product was designed for isolated networks. Also, the successor product, grandMA3, is not affected by this vulnerability.

D-Link DIR-605L v2.13B01 was discovered to contain a hardcoded password vulnerability in /etc/passwd, which allows attackers to log in as root.

A CWE-798: Use of Hard-coded Credentials vulnerability exists that could result in information disclosure. If an attacker were to obtain the SSH cryptographic key for the device and take active control of the local operational network connected to the product they could potentially observe and manipulate traffic associated with product configuration. Affected Product: Easergy P5 (All firmware versions prior to V01.401.101)

An issue was discovered on goTenna v1 devices with app 5.5.3 and firmware 0.25.5. The verification token used for sending SMS through a goTenna server is hardcoded in the app.

An issue was discovered on goTenna Mesh devices with app 5.5.3 and firmware 1.1.12. The verification token used for sending SMS through a goTenna server is hardcoded in the app.

In totolink a3100r V5.9c.4577, the hard-coded telnet password can be discovered from official released firmware. An attacker, who has connected to the Wi-Fi, can easily telnet into the target with root shell if the telnet is function turned on.

A combination of a use of hard-coded cryptographic key vulnerability [CWE-321] in FortiClientEMS 7.0.1 and below, 6.4.6 and below and an improper certificate validation vulnerability [CWE-297] in FortiClientWindows, FortiClientLinux and FortiClientMac 7.0.1 and below, 6.4.6 and below may allow an unauthenticated and network adjacent attacker to perform a man-in-the-middle attack between the EMS and the FCT via the telemetry protocol.

D-Link DVG-3104MS version 1.0.2.0.3, 1.0.2.0.4, and 1.0.2.0.4E contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

CarlinKit CPC200-CCPA Wireless Hotspot Hard-Coded Credentials Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of CarlinKit CPC200-CCPA devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the configuration of the wireless hotspot. The issue results from the use of hard-coded credentials. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-24349.

D-Link DAP-1360 Hardcoded Credentials Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DAP-1360 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of login requests to the web-based user interface. The firmware contains hard-coded default credentials. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-18455.

Huawei OceanStor 5600 V3 V300R003C00 has a hardcoded SSH key vulnerability; the hardcoded keys are used to encrypt communication data and authenticate different nodes of the devices. An attacker may obtain the hardcoded keys and log in to such a device through SSH.

A vulnerability has been found in TOZED ZLT M30S and ZLT M30S PRO 1.47/3.09.06. Affected is an unknown function of the component Web Interface. Such manipulation leads to hard-coded credentials. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

SITEL CAP/PRX firmware version 5.2.01 makes use of a hardcoded password. An attacker with access to the device could modify these credentials, leaving the administrators of the device without access.

IntelliBridge EC 40 and 60 Hub (C.00.04 and prior) contains hard-coded credentials, such as a password or a cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R7800. Authentication is not required to exploit this vulnerability. The specific flaw exists within the apply_save.cgi endpoint. This issue results from the use of hard-coded encryption key. An attacker can leverage this vulnerability to execute arbitrary code in the context of root. Was ZDI-CAN-12287.

D-Link DCS-8300LHV2 ONVIF Hardcoded PIN Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DCS-8300LHV2 IP cameras. Authentication is not required to exploit this vulnerability. The specific flaw exists within the configuration of the ONVIF API. The issue results from the use of a hardcoded PIN. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-21492.

The Android Client application, when enrolled to the AppHub server, connects to an MQTT broker to exchange messages and receive commands to execute on the HMI device. The protocol builds on top of MQTT to implement the remote management of the device is encrypted with a hard-coded DES symmetric key, that can be retrieved reversing both the Android Client application and the server-side web application. This issue allows an attacker able to control a malicious MQTT broker on the same subnet network of the device, to craft malicious messages and send them to the HMI device, executing arbitrary commands on the device itself.

Victure PC420 1.1.39 was discovered to use a weak encryption key for the file enabled_telnet.dat on the Micro SD card.

Victure PC420 1.1.39 was discovered to contain a hardcoded root password which is stored in plaintext.

An exploitable vulnerability exists in the Wi-Fi Access Point feature of the Roav A1 Dashcam running version RoavA1SWV1.9. A set of default credentials can potentially be used to connect to the device. An attacker can connect to the AP to trigger this vulnerability.

A Use of Hard-Coded Cryptographic Key issue was discovered in Mirion Technologies DMC 3000 Transmitter Module, iPam Transmitter f/DMC 2000, RDS-31 iTX and variants (including RSD31-AM Package), DRM-1/2 and variants (including Solar PWR Package), DRM and RDS Based Boundary Monitors, External Transmitters, Telepole II, and MESH Repeater (Telemetry Enabled Devices). An unchangeable, factory-set key is included in the 900 MHz transmitter firmware.