MA Lighting grandMA2 Light has a password of root for the root account. NOTE: The vendor's position is that the product was designed for isolated networks. Also, the successor product, grandMA3, is not affected by this vulnerability.

D-Link DIR-605L Hardware Revision B2 (End-of-Life, EOL) contains a hardcoded telnet backdoor. The device starts a telnet daemon at boot via /bin/telnetd.sh with the username "Alphanetworks" and the static password "wrgn76_dlwbr_dir605L" read from /etc/alpha_config/image_sign. The custom telnetd binary accepts a -u user:password flag, and the custom login binary uses strcmp() to validate credentials. Successful authentication grants an unauthenticated attacker on the local network a root shell with full administrative control. The device has reached End-of-Life (EOL) and will not receive patches.

D-Link DIR-600L Hardware Revision B1 (End-of-Life) contains a hardcoded telnet backdoor. The device starts a telnet daemon at boot via /bin/telnetd.sh with the username "Alphanetworks" and the static password "wrgn61_dlwbr_dir600L" read from /etc/alpha_config/image_sign. The custom telnetd binary accepts a -u user:password flag, and the custom login binary uses strcmp() to validate credentials. Successful authentication grants an unauthenticated attacker on the local network a root shell with full administrative control.  The device has reached End-of-Life (EOL) and will not receive patches.

A vulnerability has been identified in Spectrum Power 4 (All versions using Shared HIS), Spectrum Power 7 (All versions using Shared HIS), Spectrum Power MGMS (All versions using Shared HIS). An unauthenticated attacker could log into the component Shared HIS used in Spectrum Power systems by using an account with default credentials. A successful exploitation could allow the attacker to access the component Shared HIS with administrative privileges.

An issue was discovered on NETGEAR Orbi Tri-Band Business WiFi Add-on Satellite (SRS60) AC3000 V2.5.1.106, Outdoor Satellite (RBS50Y) V2.5.1.106, and Pro Tri-Band Business WiFi Router (SRR60) AC3000 V2.5.1.106. The root account has the same password as the Web-admin component. Thus, by exploiting CVE-2020-11551, it is possible to achieve remote code execution with root privileges on the embedded Linux system.

This vulnerability allows network-adjacent attackers execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the tdpServer service, which listens on UDP port 20002 by default. This issue results from the use of hard-coded encryption key. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-9652.

The Android Client application, when enrolled to the AppHub server, connects to an MQTT broker to exchange messages and receive commands to execute on the HMI device. The protocol builds on top of MQTT to implement the remote management of the device is encrypted with a hard-coded DES symmetric key, that can be retrieved reversing both the Android Client application and the server-side web application. This issue allows an attacker able to control a malicious MQTT broker on the same subnet network of the device, to craft malicious messages and send them to the HMI device, executing arbitrary commands on the device itself.

A vulnerability was found in TOTOLINK A3000RU 5.9c.5185. It has been rated as problematic. This issue affects some unknown processing of the file /web_cste/cgi-bin/product.ini. The manipulation leads to use of hard-coded password. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-272591. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Authentication Bypass via Hardcoded Credentials GoAway up to v0.62.18, fixed in 0.62.19, uses a hardcoded secret for signing JWT tokens used for authentication.

The ABB HMI components implement hidden administrative accounts that are used during the provisioning phase of the HMI interface. These credentials allow the provisioning tool "Panel Builder 600" to flash a new interface and Tags (MODBUS coils) mapping to the HMI. These credentials are the idal123 password for the IdalMaster account, and the exor password for the exor account. These credentials are used over both HTTP(S) and FTP. There is no option to disable or change these undocumented credentials. An attacker can use these credentials to login to ABB HMI to read/write HMI configuration files and also to reset the device. This affects ABB CP635 HMI, CP600 HMIClient, Panel Builder 600, IDAL FTP server, IDAL HTTP server, and multiple other HMI components.

Certain NETGEAR devices are affected by a hardcoded password. This affects D6200 before 1.1.00.36, D7000 before 1.0.1.74, PR2000 before 1.0.0.30, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6050 before 1.0.1.24, JR6150 before 1.0.1.24, R6120 before 1.0.0.48, R6220 before 1.1.0.86, R6230 before 1.1.0.86, R6260 before 1.1.0.64, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R6900v2 before 1.2.0.62, and WNR2020 before 1.1.0.62.

Victure PC420 1.1.39 was discovered to contain a hardcoded root password which is stored in plaintext.

Victure PC420 1.1.39 was discovered to use a weak encryption key for the file enabled_telnet.dat on the Micro SD card.

Hard-coded credentials in Juplink RX4-1500 versions V1.0.2 through V1.0.5 allow unauthenticated attackers to log in to the web interface or telnet service as the 'user' user.

Certain NETGEAR devices are affected by a hardcoded password. This affects RBK352 before 4.4.0.10, RBR350 before 4.4.0.10, and RBS350 before 4.4.0.10.

In totolink a3100r V5.9c.4577, the hard-coded telnet password can be discovered from official released firmware. An attacker, who has connected to the Wi-Fi, can easily telnet into the target with root shell if the telnet is function turned on.

NETGEAR XR1000 devices before 1.0.0.58 are affected by a hardcoded password.

A weak default administrator password for the web interface and serial port was reported in some Lenovo Personal Cloud Storage devices that could allow unauthorized device access to an attacker with physical or local network access.

A default credentials vulnerability in Tenda W18E V16.01.0.8(1625) allows unauthenticated remote attackers to access the web management portal using the default rzadmin account with administrative privileges.

D-Link DVG-3104MS version 1.0.2.0.3, 1.0.2.0.4, and 1.0.2.0.4E contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

ABB CP651 HMI products revision BSP UN30 v1.76 and prior implement hidden administrative accounts that are used during the provisioning phase of the HMI interface.

IntelliBridge EC 40 and 60 Hub (C.00.04 and prior) contains hard-coded credentials, such as a password or a cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R7800. Authentication is not required to exploit this vulnerability. The specific flaw exists within the apply_save.cgi endpoint. This issue results from the use of hard-coded encryption key. An attacker can leverage this vulnerability to execute arbitrary code in the context of root. Was ZDI-CAN-12287.

ColdFusion versions 2025.2, 2023.14, 2021.20 and earlier are affected by a Use of Hard-coded Credentials vulnerability that could result in privilege escalation. An attacker could leverage this vulnerability to gain unauthorized access to sensitive systems or data. Exploitation of this issue does not require user interaction. The vulnerable component is restricted to internal IP addresses.

A vulnerability has been found in Yi Technology YI Home Camera 2 2.1.1_20171024151200. The affected element is an unknown function of the file home/web/ipc. Such manipulation leads to hard-coded credentials. Access to the local network is required for this attack to succeed. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in taoeffect Empress. Affected by this issue is some unknown functionality. The manipulation leads to use of hard-coded password. The patch is identified as 557e177d8a309d6f0f26de46efb38d43e000852d. It is recommended to apply a patch to fix this issue. VDB-217154 is the identifier assigned to this vulnerability.

Quagga Services on D-Link DIR-2640 less than or equal to version 1.11B02 use default hard-coded credentials, which can allow a remote attacker to gain administrative access to the zebra or ripd those services. Both are running with root privileges on the router (i.e., as the "admin" user, UID 0).

An issue was discovered on goTenna v1 devices with app 5.5.3 and firmware 0.25.5. The verification token used for sending SMS through a goTenna server is hardcoded in the app.

CarlinKit CPC200-CCPA Wireless Hotspot Hard-Coded Credentials Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of CarlinKit CPC200-CCPA devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the configuration of the wireless hotspot. The issue results from the use of hard-coded credentials. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-24349.

Archer C50 firmware versions prior to 'Archer C50(JP)_V3_230505' and Archer C55 firmware versions prior to 'Archer C55(JP)_V1_230506' use hard-coded credentials to login to the affected device, which may allow a network-adjacent unauthenticated attacker to execute an arbitrary OS command.

D-Link DCS-8300LHV2 ONVIF Hardcoded PIN Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DCS-8300LHV2 IP cameras. Authentication is not required to exploit this vulnerability. The specific flaw exists within the configuration of the ONVIF API. The issue results from the use of a hardcoded PIN. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-21492.

D-Link DIR-600L Hardware Revision A1 (End-of-Life) contains a hardcoded telnet backdoor. The device starts a telnet daemon at boot via /bin/telnetd.sh with the username "Alphanetworks" and the static password "wrgn35_dlwbr_dir600l" read from /etc/alpha_config/image_sign. The custom telnetd binary accepts a -u user:password flag, and the custom login binary uses strcmp() to validate credentials. Successful authentication grants an unauthenticated attacker on the local network a root shell with full administrative control. The device has reached End-of-Life (EOL) and will not receive patches.

D-Link DIR-605L Hardware Revision A1 (End-of-Life, EOL) contains a hardcoded telnet backdoor. The device starts a telnet daemon at boot via /bin/telnetd.sh with the username "Alphanetworks" and the static password "wrgn35_dlwbr_dir605l" read from /etc/alpha_config/image_sign. The custom telnetd binary accepts a -u user:password flag, and the custom login binary uses strcmp() to validate credentials. Successful authentication grants an unauthenticated attacker on the local network a root shell with full administrative control. The device has reached End-of-Life (EOL) and will not receive patches.

A vulnerability classified as critical was found in OTCMS up to 6.62. This vulnerability affects unknown code. The manipulation of the argument username/password with the input admin leads to use of hard-coded password. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-231508.

D-Link DAP-1360 Hardcoded Credentials Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DAP-1360 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of login requests to the web-based user interface. The firmware contains hard-coded default credentials. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-18455.

D-Link DIR-300 REVA FIRMWARE v1.06B05_WW contains hardcoded credentials in the Telnet service.

Precor touchscreen console P62, P80, and P82 could allow a remote attacker to obtain sensitive information because the root password is stored in /etc/passwd. An attacker could exploit this to extract files and obtain sensitive information.

Precor touchscreen console P82 contains a private SSH key that corresponds to a default public key. A remote attacker could exploit this to gain root privileges.

D-Link DIR-605L v2.13B01 was discovered to contain a hardcoded password vulnerability in /etc/passwd, which allows attackers to log in as root.

An exploitable vulnerability exists in the Wi-Fi Access Point feature of the Roav A1 Dashcam running version RoavA1SWV1.9. A set of default credentials can potentially be used to connect to the device. An attacker can connect to the AP to trigger this vulnerability.

An issue was discovered on goTenna Mesh devices with app 5.5.3 and firmware 1.1.12. The verification token used for sending SMS through a goTenna server is hardcoded in the app.

A vulnerability was found in openstack-tripleo-heat-templates before version 8.0.2-40. When deployed using Director using default configuration, Opendaylight in RHOSP13 is configured with easily guessable default credentials.

Weak account password in GE HealthCare EchoPAC products

WN-G300R3 firmware version 1.0.2 and earlier uses hardcoded credentials which may allow an attacker that can access the device to execute arbitrary code on the device.

D-Link DAP-2622 Telnet CLI Use of Hardcoded Credentials Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the CLI service, which listens on TCP port 23. The server program contains hard-coded credentials. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-20050.

Hughes high-performance broadband satellite modems, models HN7740S DW7000 HN7000S/SM, uses hard coded credentials. Access to the device's default telnet port (23) can be obtained through using one of a few default credentials shared among all devices.

Tesla SolarCity Solar Monitoring Gateway through 5.46.43 has a "Use of Hard-coded Credentials" issue because Digi ConnectPort X2e uses a .pyc file to store the cleartext password for the python user account.

Specific firmware versions of Milesight AIOT camera firmware contain hard-coded credentials.

A vulnerability has been found in Beetel 777VR1 up to 01.00.09. The impacted element is an unknown function of the component Web Management Interface. The manipulation leads to hard-coded credentials. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. It is advisable to modify the configuration settings. The vendor was contacted early about this disclosure but did not respond in any way.

Contec FXA3200 version 1.13 and under were discovered to contain a hard coded hash password for root stored in the component /etc/shadow. As the password strength is weak, it can be cracked in few minutes. Through this credential, a malicious actor can access the Wireless LAN Manager interface and open the telnet port then sniff the traffic or inject any malware.