USG9500 with versions of V500R001C30;V500R001C60 have a denial of service vulnerability. Due to a flaw in the X.509 implementation in the affected products which can result in an infinite loop, an attacker may exploit the vulnerability via a malicious certificate to perform a denial of service attack on the affected products.

An infinite loop in Open Robotics ros_comm XMLRPC server in ROS Melodic through 1.4.11 and ROS Noetic through1.15.11 allows remote attackers to cause a Denial of Service in ros_comm via a crafted XMLRPC call.

DOCSIS dissector crash in Wireshark 4.2.0 allows denial of service via packet injection or crafted capture file

In Contiki 3.0, potential nonterminating acknowledgment loops exist in the Telnet service. When the negotiated options are already disabled, servers still respond to DONT and WONT requests with WONT or DONT commands, which may lead to infinite acknowledgment loops, denial of service, and excessive CPU consumption.

The Candid library causes a Denial of Service while parsing a specially crafted payload with 'empty' data type. For example, if the payload is `record { * ; empty }` and the canister interface expects `record { * }` then the Rust candid decoder treats empty as an extra field required by the type. The problem with the type empty is that the candid Rust library wrongly categorizes empty as a recoverable error when skipping the field and thus causing an infinite decoding loop. Canisters using affected versions of candid are exposed to denial of service by causing the decoding to run indefinitely until the canister traps due to reaching maximum instruction limit per execution round. Repeated exposure to the payload will result in degraded performance of the canister. Note: Canisters written in Motoko are unaffected.

A denial of service issue was addressed with improved input validation.

Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group ). Prior to versions 3.4.1, 3.3.1, and 2.6.11, a remotely triggerable Out-of-Memory (OOM) denial-of-service exists in Fast -DDS when processing RTPS GAP submessages under RELIABLE QoS. By sending a tiny GAP packet with a huge gap range (`gapList .base - gapStart`), an attacker drives `StatefulReader::processGapMsg()` into an unbounded loop that inserts millions of s equence numbers into `WriterProxy::changes_received_` (`std::set`), causing multi-GB heap growth and process termination. No authentication is required beyond network reachability to the reader on the DDS domain. In environments without an RSS limit (non-ASan / unlimited), memory consumption was observed to rise to ~64 GB. Versions 3.4.1, 3.3.1, and 2.6.11 patch t he issue.

An infinite loop issue discovered in Mathtex 1.05 and before allows a remote attackers to consume CPU resources via crafted string in the application URL.

eProsima Fast-DDS v3.3 and before has an infinite loop vulnerability caused by integer overflow in the Time_t:: fraction() function.

hutool-core v5.8.23 was discovered to contain an infinite loop in the StrSplitter.splitByRegex function. This vulnerability allows attackers to cause a Denial of Service (DoS) via manipulation of the first two parameters.

ModularSquareRoot in Crypto++ (aka cryptopp) through 8.9.0 allows attackers to cause a denial of service (infinite loop) via crafted DER public-key data associated with squared odd numbers, such as the square of 268995137513890432434389773128616504853.

A vulnerability was found in HobbesOSR Kitten up to c4f8b7c3158983d1020af432be1b417b28686736 and classified as critical. Affected by this issue is the function set_pte_at in the library /include/arch-arm64/pgtable.h. The manipulation leads to resource consumption. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available.

When reading a specially crafted 7Z archive, the construction of the list of codecs that decompress an entry can result in an infinite loop. This could be used to mount a denial of service attack against services that use Compress' sevenz package.

An issue was discovered in ApiPageSet.php in MediaWiki before 1.35.12, 1.36.x through 1.39.x before 1.39.5, and 1.40.x before 1.40.1. It allows attackers to cause a denial of service (unbounded loop and RequestTimeoutException) when querying pages redirected to other variants with redirects and converttitles set.

BT SDP dissector infinite loop in Wireshark 4.0.0 to 4.0.7 and 3.6.0 to 3.6.15 allows denial of service via packet injection or crafted capture file

EDK2's Network Package is susceptible to an infinite lop vulnerability when parsing a PadN option in the Destination Options header of IPv6. This vulnerability can be exploited by an attacker to gain unauthorized access and potentially lead to a loss of Availability.

An issue was discovered in the CentralAuth extension in MediaWiki through 1.36. The Special:GlobalRenameRequest page is vulnerable to infinite loops and denial of service attacks when a user's current username is beyond an arbitrary maximum configuration value (MaxNameChars).

Unbound before 1.9.5 allows an infinite loop via a compressed name in dname_pkt_copy. NOTE: The vendor disputes that this is a vulnerability. Although the code may be vulnerable, a running Unbound installation cannot be remotely or locally exploited

Windows Standards-Based Storage Management Service Denial of Service Vulnerability

Transient DOS while parsing IPv6 extension header when WLAN firmware receives an IPv6 packet that contains `IPPROTO_NONE` as the next header.

While processing Attach Reject message, Valid exit condition is not met resulting into an infinite loop in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, MDM9150, MDM9205, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8976, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, SC8180X, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX55, SM6150, SM7150, SM8150, SM8250, Snapdragon_High_Med_2016, SXR1130, SXR2130

In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.

ise smart connect KNX Vaillant 1.2.839 contain a Denial of Service.

golang.org/x/net before v0.0.0-20210520170846-37e1c6afe023 allows attackers to cause a denial of service (infinite loop) via crafted ParseFragment input.

ProFTPD before 1.3.6b and 1.3.7rc before 1.3.7rc2 allows remote unauthenticated denial-of-service due to incorrect handling of overly long commands because main.c in a child process enters an infinite loop.

An issue was discovered in tcp_pulloutofband() in tcp_in.c in HCC embedded InterNiche 4.0.1. The TCP out-of-band urgent-data processing function invokes a panic function if the pointer to the end of the out-of-band data points outside of the TCP segment's data. If the panic function hadn't a trap invocation removed, it will enter an infinite loop and therefore cause DoS (continuous loop or a device reset).

In Jp2Image::readMetadata() in jp2image.cpp in Exiv2 0.27.2, an input file can result in an infinite loop and hang, with high CPU consumption. Remote attackers could leverage this vulnerability to cause a denial of service via a crafted file.

A vulnerability in the JsonMapObjectReaderWriter of Apache CXF allows an attacker to submit malformed JSON to a web service, which results in the thread getting stuck in an infinite loop, consuming CPU indefinitely. This issue affects Apache CXF versions prior to 3.4.4; Apache CXF versions prior to 3.3.11.

An issue was discovered in the /api/connector endpoint handler in Yubico yubihsm-connector before 3.0.1 (in YubiHSM SDK before 2021.04). The handler did not validate the length of the request, which can lead to a state where yubihsm-connector becomes stuck in a loop waiting for the YubiHSM to send it data, preventing any further operations until the yubihsm-connector is restarted. An attacker can send 0, 1, or 2 bytes to trigger this.

An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.

StackStorm before 3.4.1, in some situations, has an infinite loop that consumes all available memory and disk space. This can occur if Python 3.x is used, the locale is not utf-8, and there is an attempt to log Unicode data (from an action or rule name).

xz is a compression and decompression library focusing on the xz format completely written in Go. The function readUvarint used to read the xz container format may not terminate a loop provide malicous input. The problem has been fixed in release v0.5.8. As a workaround users can limit the size of the compressed file input to a reasonable size for their use case. The standard library had recently the same issue and got the CVE-2020-16845 allocated.

cumulative-distribution-function is an open source npm library used which calculates statistical cumulative distribution function from data array of x values. In versions prior to 2.0.0 apps using this library on improper data may crash or go into an infinite-loop. In the case of a nodejs server-app using this library to act on invalid non-numeric data, the nodejs server may crash. This may affect other users of this server and/or require the server to be rebooted for proper operation. In the case of a browser app using this library to act on invalid non-numeric data, that browser may crash or lock up. A flaw enabling an infinite-loop was discovered in the code for evaluating the cumulative-distribution-function of input data. Although the documentation explains that numeric data is required, some users may confuse an array of strings like ["1","2","3","4","5"] for numeric data [1,2,3,4,5] when it is in fact string data. An infinite loop is possible when the cumulative-distribution-function is evaluated for a given point when the input data is string data rather than type `number`. This vulnerability enables an infinite-cpu-loop denial-of-service-attack on any app using npm:cumulative-distribution-function v1.0.3 or earlier if the attacker can supply malformed data to the library. The vulnerability could also manifest if a data source to be analyzed changes data type from Arrays of number (proper) to Arrays of string (invalid, but undetected by earlier version of the library). Users should upgrade to at least v2.0.0, or the latest version. Tests for several types of invalid data have been created, and version 2.0.0 has been tested to reject this invalid data by throwing a `TypeError()` instead of processing it. Developers using this library may wish to adjust their app's code slightly to better tolerate or handle this TypeError. Apps performing proper numeric data validation before sending data to this library should be mostly unaffected by this patch. The vulnerability can be mitigated in older versions by ensuring that only finite numeric data of type `Array[number]` or `number` is passed to `cumulative-distribution-function` and its `f(x)` function, respectively.

Tenda PA6 Wi-Fi Powerline extender 1.0.1.21 is vulnerable to a denial of service, caused by an error in the "homeplugd" process. By sending a specially crafted UDP packet, an attacker could exploit this vulnerability to cause the device to reboot.

The validators package 0.12.2 through 0.12.5 for Python enters an infinite loop when validators.domain is called with a crafted domain string. This is fixed in 0.12.6.

Pydantic is a data validation and settings management using Python type hinting. In affected versions passing either `'infinity'`, `'inf'` or `float('inf')` (or their negatives) to `datetime` or `date` fields causes validation to run forever with 100% CPU usage (on one CPU). Pydantic has been patched with fixes available in the following versions: v1.8.2, v1.7.4, v1.6.2. All these versions are available on pypi(https://pypi.org/project/pydantic/#history), and will be available on conda-forge(https://anaconda.org/conda-forge/pydantic) soon. See the changelog(https://pydantic-docs.helpmanual.io/) for details. If you absolutely can't upgrade, you can work around this risk using a validator(https://pydantic-docs.helpmanual.io/usage/validators/) to catch these values. This is not an ideal solution (in particular you'll need a slightly different function for datetimes), instead of a hack like this you should upgrade pydantic. If you are not using v1.8.x, v1.7.x or v1.6.x and are unable to upgrade to a fixed version of pydantic, please create an issue at https://github.com/samuelcolvin/pydantic/issues requesting a back-port, and we will endeavour to release a patch for earlier versions of pydantic.

encoding/xml in Go before 1.15.9 and 1.16.x before 1.16.1 has an infinite loop if a custom TokenReader (for xml.NewTokenDecoder) returns EOF in the middle of an element. This can occur in the Decode, DecodeElement, or Skip method.

A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). A remote attacker could send specially crafted packets to SmartVNC device layout handler on client side, which could influence the amount of resources consumed and result in a Denial-of-Service (infinite loop) condition.

The web server in InterNiche NicheStack through 4.0.1 allows remote attackers to cause a denial of service (infinite loop and networking outage) via an unexpected valid HTTP request such as OPTIONS. This occurs because the HTTP request handler enters a miscoded wbs_loop() debugger hook.

Envoy 1.12.0 allows a remote denial of service because of resource loops, as demonstrated by a single idle TCP connection being able to keep a worker thread in an infinite busy loop when continue_on_listener_filters_timeout is used."

A vulnerability has been identified in Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), Nucleus NET (All versions), Nucleus ReadyStart V3 (All versions < V2017.02.4), Nucleus ReadyStart V4 (All versions < V4.1.0), Nucleus Source Code (All versions including affected IPv6 stack). The function that processes the Hop-by-Hop extension header in IPv6 packets and its options lacks any checks against the length field of the header, allowing attackers to put the function into an infinite loop by supplying arbitrary length values.

A vulnerability has been identified in Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), Nucleus NET (All versions), Nucleus ReadyStart V3 (All versions < V2017.02.4), Nucleus ReadyStart V4 (All versions < V4.1.0), Nucleus Source Code (All versions including affected IPv6 stack). The function that processes IPv6 headers does not check the lengths of extension header options, allowing attackers to put this function into an infinite loop with crafted length values.

An issue was discovered in GitLab Community and Enterprise Edition 11 through 12.4 when building Nested GraphQL queries. It has a large or infinite loop.

A vulnerability in the filesystem image parser for Hierarchical File System Plus (HFS+) of ClamAV could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an incorrect check for completion when a file is decompressed, which may result in a loop condition that could cause the affected software to stop responding. An attacker could exploit this vulnerability by submitting a crafted HFS+ filesystem image to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to stop responding, resulting in a DoS condition on the affected software and consuming available system resources. For a description of this vulnerability, see the ClamAV blog .

lib-smtp in submission-login and lmtp in Dovecot 2.3.9 before 2.3.9.3 mishandles truncated UTF-8 data in command parameters, as demonstrated by the unauthenticated triggering of a submission-login infinite loop.