Out-of-bounds write in the firmware for some Intel(R) Processors may allow a privileged user to potentially enable an escalation of privilege via local access.
In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid There is a string parsing logic error which can lead to an overflow of hid or uid buffers. Comparing ACPIID_LEN against a total string length doesn't take into account the lengths of individual hid and uid buffers so the check is insufficient in some cases. For example if the length of hid string is 4 and the length of the uid string is 260, the length of str will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer which size is 256. The same applies to the hid string with length 13 and uid string with length 250. Check the length of hid and uid strings separately to prevent buffer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.
A flaw was found in the Linux Kernel in versions after 4.5-rc1 in the way mremap handled DAX Huge Pages. This flaw allows a local attacker with access to a DAX enabled storage to escalate their privileges on the system.
In the Linux kernel 5.5.0 and newer, the bpf verifier (kernel/bpf/verifier.c) did not properly restrict the register bounds for 32-bit operations, leading to out-of-bounds reads and writes in kernel memory. The vulnerability also affects the Linux 5.4 stable series, starting with v5.4.7, as the introducing commit was backported to that branch. This vulnerability was fixed in 5.6.1, 5.5.14, and 5.4.29. (issue is aka ZDI-CAN-10780)
In the Linux kernel, the following vulnerability has been resolved: cifs: Fix writeback data corruption cifs writeback doesn't correctly handle the case where cifs_extend_writeback() hits a point where it is considering an additional folio, but this would overrun the wsize - at which point it drops out of the xarray scanning loop and calls xas_pause(). The problem is that xas_pause() advances the loop counter - thereby skipping that page. What needs to happen is for xas_reset() to be called any time we decide we don't want to process the page we're looking at, but rather send the request we are building and start a new one. Fix this by copying and adapting the netfslib writepages code as a temporary measure, with cifs writeback intending to be offloaded to netfslib in the near future. This also fixes the issue with the use of filemap_get_folios_tag() causing retry of a bunch of pages which the extender already dealt with. This can be tested by creating, say, a 64K file somewhere not on cifs (otherwise copy-offload may get underfoot), mounting a cifs share with a wsize of 64000, copying the file to it and then comparing the original file and the copy: dd if=/dev/urandom of=/tmp/64K bs=64k count=1 mount //192.168.6.1/test /mnt -o user=...,pass=...,wsize=64000 cp /tmp/64K /mnt/64K cmp /tmp/64K /mnt/64K Without the fix, the cmp fails at position 64000 (or shortly thereafter).
An out-of-bounds memory write flaw was found in the Linux kernel’s Kid-friendly Wired Controller driver. This flaw allows a local user to crash or potentially escalate their privileges on the system. It is in bigben_probe of drivers/hid/hid-bigbenff.c. The reason is incorrect assumption - bigben devices all have inputs. However, malicious devices can break this assumption, leaking to out-of-bound write.
In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix disable_managed_interrupts Correct blk-mq registration issue with module parameter disable_managed_interrupts enabled. When we turn off the default PCI_IRQ_AFFINITY flag, the driver needs to register with blk-mq using blk_mq_map_queues(). The driver is currently calling blk_mq_pci_map_queues() which results in a stack trace and possibly undefined behavior. Stack Trace: [ 7.860089] scsi host2: smartpqi [ 7.871934] WARNING: CPU: 0 PID: 238 at block/blk-mq-pci.c:52 blk_mq_pci_map_queues+0xca/0xd0 [ 7.889231] Modules linked in: sd_mod t10_pi sg uas smartpqi(+) crc32c_intel scsi_transport_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ 7.924755] CPU: 0 PID: 238 Comm: kworker/0:3 Not tainted 4.18.0-372.88.1.el8_6_smartpqi_test.x86_64 #1 [ 7.944336] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 03/08/2022 [ 7.963026] Workqueue: events work_for_cpu_fn [ 7.978275] RIP: 0010:blk_mq_pci_map_queues+0xca/0xd0 [ 7.978278] Code: 48 89 de 89 c7 e8 f6 0f 4f 00 3b 05 c4 b7 8e 01 72 e1 5b 31 c0 5d 41 5c 41 5d 41 5e 41 5f e9 7d df 73 00 31 c0 e9 76 df 73 00 <0f> 0b eb bc 90 90 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54 [ 7.978280] RSP: 0018:ffffa95fc3707d50 EFLAGS: 00010216 [ 7.978283] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000010 [ 7.978284] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff9190c32d4310 [ 7.978286] RBP: 0000000000000000 R08: ffffa95fc3707d38 R09: ffff91929b81ac00 [ 7.978287] R10: 0000000000000001 R11: ffffa95fc3707ac0 R12: 0000000000000000 [ 7.978288] R13: ffff9190c32d4000 R14: 00000000ffffffff R15: ffff9190c4c950a8 [ 7.978290] FS: 0000000000000000(0000) GS:ffff9193efc00000(0000) knlGS:0000000000000000 [ 7.978292] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.172814] CR2: 000055d11166c000 CR3: 00000002dae10002 CR4: 00000000007706f0 [ 8.172816] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.172817] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.172818] PKRU: 55555554 [ 8.172819] Call Trace: [ 8.172823] blk_mq_alloc_tag_set+0x12e/0x310 [ 8.264339] scsi_add_host_with_dma.cold.9+0x30/0x245 [ 8.279302] pqi_ctrl_init+0xacf/0xc8e [smartpqi] [ 8.294085] ? pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.309015] pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.323286] local_pci_probe+0x42/0x80 [ 8.337855] work_for_cpu_fn+0x16/0x20 [ 8.351193] process_one_work+0x1a7/0x360 [ 8.364462] ? create_worker+0x1a0/0x1a0 [ 8.379252] worker_thread+0x1ce/0x390 [ 8.392623] ? create_worker+0x1a0/0x1a0 [ 8.406295] kthread+0x10a/0x120 [ 8.418428] ? set_kthread_struct+0x50/0x50 [ 8.431532] ret_from_fork+0x1f/0x40 [ 8.444137] ---[ end trace 1bf0173d39354506 ]---
In the Linux kernel, the following vulnerability has been resolved: init/main.c: Fix potential static_command_line memory overflow We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for static_command_line, but the strings copied into static_command_line are extra_command_line and command_line, rather than extra_command_line and boot_command_line. When strlen(command_line) > strlen(boot_command_line), static_command_line will overflow. This patch just recovers strlen(command_line) which was miss-consolidated with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()")
In the Linux Kernel before versions 4.20.8 and 4.19.21 a use-after-free error in the "sctp_sendmsg()" function (net/sctp/socket.c) when handling SCTP_SENDALL flag can be exploited to corrupt memory.
In the Linux kernel, the following vulnerability has been resolved: crypto: virtio/akcipher - Fix stack overflow on memcpy sizeof(struct virtio_crypto_akcipher_session_para) is less than sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from stack variable leads stack overflow. Clang reports this issue by commands: make -j CC=clang-14 mrproper >/dev/null 2>&1 make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1 make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/ virtio_crypto_akcipher_algs.o
In the Linux kernel, the following vulnerability has been resolved: pwm: Fix out-of-bounds access in of_pwm_single_xlate() With args->args_count == 2 args->args[2] is not defined. Actually the flags are contained in args->args[1].
In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Prevent out-of-bounds memory access The test_tag test triggers an unhandled page fault: # ./test_tag [ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70 [ 130.640501] Oops[#3]: [ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a [ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40 [ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000 [ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000 [ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70 [ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0 [ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0 [ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000 [ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000 [ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988 [ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988 [ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 130.642658] BADV: ffff80001b898004 [ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)] [ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd) [ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8 [ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0 [ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000 [ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000 [ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000 [ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000 [ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558 [ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000 [ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc [ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0 [ 130.644572] ... [ 130.644629] Call Trace: [ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988 [ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec [ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0 [ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44 [ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588 [ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c [ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94 [ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158 [ 130.645507] [ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91 [ 130.645729] [ 130.646418] ---[ end trace 0000000000000000 ]--- On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at loading a BPF prog with 2039 instructions: prog = (struct bpf_prog *)ffff80001b894000 insn = (struct bpf_insn *)(prog->insnsi)fff ---truncated---
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix hashtab overflow check on 32-bit arches The hashtab code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. So apply the same fix to hashtab, by moving the overflow check to before the roundup.
In the Linux kernel, the following vulnerability has been resolved: clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stackmap overflow check on 32-bit arches The stackmap code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. The commit in the fixes tag actually attempted to fix this, but the fix did not account for the UB, so the fix only works on CPUs where an overflow does result in a neat truncation to zero, which is not guaranteed. Checking the value before rounding does not have this problem.
In the Linux kernel, the following vulnerability has been resolved: afs: Increase buffer size in afs_update_volume_status() The max length of volume->vid value is 20 characters. So increase idbuf[] size up to 24 to avoid overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. [DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]
The kvm_iommu_map_pages function in virt/kvm/iommu.c in the Linux kernel through 3.17.2 miscalculates the number of pages during the handling of a mapping failure, which allows guest OS users to cause a denial of service (host OS page unpinning) or possibly have unspecified other impact by leveraging guest OS privileges. NOTE: this vulnerability exists because of an incorrect fix for CVE-2014-3601.
A heap buffer overflow flaw was found in IPsec ESP transformation code in net/ipv4/esp4.c and net/ipv6/esp6.c. This flaw allows a local attacker with a normal user privilege to overwrite kernel heap objects and may cause a local privilege escalation threat.
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: update channel list in reg notifier instead reg worker Currently when ath11k gets a new channel list, it will be processed according to the following steps: 1. update new channel list to cfg80211 and queue reg_work. 2. cfg80211 handles new channel list during reg_work. 3. update cfg80211's handled channel list to firmware by ath11k_reg_update_chan_list(). But ath11k will immediately execute step 3 after reg_work is just queued. Since step 2 is asynchronous, cfg80211 may not have completed handling the new channel list, which may leading to an out-of-bounds write error: BUG: KASAN: slab-out-of-bounds in ath11k_reg_update_chan_list Call Trace: ath11k_reg_update_chan_list+0xbfe/0xfe0 [ath11k] kfree+0x109/0x3a0 ath11k_regd_update+0x1cf/0x350 [ath11k] ath11k_regd_update_work+0x14/0x20 [ath11k] process_one_work+0xe35/0x14c0 Should ensure step 2 is completely done before executing step 3. Thus Wen raised patch[1]. When flag NL80211_REGDOM_SET_BY_DRIVER is set, cfg80211 will notify ath11k after step 2 is done. So enable the flag NL80211_REGDOM_SET_BY_DRIVER then cfg80211 will notify ath11k after step 2 is done. At this time, there will be no KASAN bug during the execution of the step 3. [1] https://patchwork.kernel.org/project/linux-wireless/patch/20230201065313.27203-1-quic_wgong@quicinc.com/ Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
A heap buffer overflow in the TFTP receiving code allows for DoS or arbitrary code execution in libcurl versions 7.19.4 through 7.64.1.
The sock_setsockopt function in net/core/sock.c in the Linux kernel before 4.8.14 mishandles negative values of sk_sndbuf and sk_rcvbuf, which allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact by leveraging the CAP_NET_ADMIN capability for a crafted setsockopt system call with the (1) SO_SNDBUFFORCE or (2) SO_RCVBUFFORCE option.
In the Linux kernel, the following vulnerability has been resolved: powerpc/code-patching: Disable KASAN report during patching via temporary mm Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13: [ 12.028126] ================================================================== [ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1 [ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3 [ 12.028408] Tainted: [T]=RANDSTRUCT [ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV [ 12.028500] Call Trace: [ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable) [ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708 [ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300 [ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370 [ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40 [ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210 [ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590 [ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0 [ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0 [ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930 [ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280 [ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370 [ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00 [ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40 [ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610 [ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280 [ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8 [ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000 [ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty) [ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000 [ 12.029855] IRQMASK: 0 GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005 GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000 GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90 GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80 GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8 GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580 [ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030405] --- interrupt: 3000 [ 12.030444] ================================================================== Commit c28c15b6d28a ("powerpc/code-patching: Use temporary mm for Radix MMU") is inspired from x86 but unlike x86 is doesn't disable KASAN reports during patching. This wasn't a problem at the begining because __patch_mem() is not instrumented. Commit 465cabc97b42 ("powerpc/code-patching: introduce patch_instructions()") use copy_to_kernel_nofault() to copy several instructions at once. But when using temporary mm the destination is not regular kernel memory but a kind of kernel-like memory located in user address space. ---truncated---
The apparmor_setprocattr function in security/apparmor/lsm.c in the Linux kernel before 4.6.5 does not validate the buffer size, which allows local users to gain privileges by triggering an AppArmor setprocattr hook.
Heap-based buffer overflow in the wcnss_wlan_write function in drivers/net/wireless/wcnss/wcnss_wlan.c in the wcnss_wlan device driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to cause a denial of service or possibly have unspecified other impact by writing to /dev/wcnss_wlan with an unexpected amount of data.
A heap-based buffer overflow in the vrend_renderer_transfer_write_iov function in vrend_renderer.c in virglrenderer through 0.8.0 allows guest OS users to cause a denial of service, or QEMU guest-to-host escape and code execution, via VIRGL_CCMD_RESOURCE_INLINE_WRITE commands.
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-Force ID: 158519.
In the Linux kernel, the following vulnerability has been resolved: partitions: mac: fix handling of bogus partition table Fix several issues in partition probing: - The bailout for a bad partoffset must use put_dev_sector(), since the preceding read_part_sector() succeeded. - If the partition table claims a silly sector size like 0xfff bytes (which results in partition table entries straddling sector boundaries), bail out instead of accessing out-of-bounds memory. - We must not assume that the partition table contains proper NUL termination - use strnlen() and strncmp() instead of strlen() and strcmp().
drivers/media/v4l2-core/videobuf2-v4l2.c in the Linux kernel before 4.5.3 allows local users to cause a denial of service (kernel memory write operation) or possibly have unspecified other impact via a crafted number of planes in a VIDIOC_DQBUF ioctl call.
The tipc_msg_build function in net/tipc/msg.c in the Linux kernel through 4.8.11 does not validate the relationship between the minimum fragment length and the maximum packet size, which allows local users to gain privileges or cause a denial of service (heap-based buffer overflow) by leveraging the CAP_NET_ADMIN capability.
Stack-based buffer overflow in the supply_lm_input_write function in drivers/thermal/supply_lm_core.c in the MSM Thermal driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to cause a denial of service or possibly have unspecified other impact via a crafted application that sends a large amount of data through the debugfs interface.
In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf/32: Fix Oops on tail call tests test_bpf tail call tests end up as: test_bpf: #0 Tail call leaf jited:1 85 PASS test_bpf: #1 Tail call 2 jited:1 111 PASS test_bpf: #2 Tail call 3 jited:1 145 PASS test_bpf: #3 Tail call 4 jited:1 170 PASS test_bpf: #4 Tail call load/store leaf jited:1 190 PASS test_bpf: #5 Tail call load/store jited:1 BUG: Unable to handle kernel data access on write at 0xf1b4e000 Faulting instruction address: 0xbe86b710 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: test_bpf(+) CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ #195 Hardware name: PowerMac3,1 750CL 0x87210 PowerMac NIP: be86b710 LR: be857e88 CTR: be86b704 REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000 DAR: f1b4e000 DSISR: 42000000 GPR00: 00000001 f1b4dfe0 c11d2280 00000000 00000000 00000000 00000002 00000000 GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8 GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000 GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00 NIP [be86b710] 0xbe86b710 LR [be857e88] __run_one+0xec/0x264 [test_bpf] Call Trace: [f1b4dfe0] [00000002] 0x2 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- This is a tentative to write above the stack. The problem is encoutered with tests added by commit 38608ee7b690 ("bpf, tests: Add load store test case for tail call") This happens because tail call is done to a BPF prog with a different stack_depth. At the time being, the stack is kept as is when the caller tail calls its callee. But at exit, the callee restores the stack based on its own properties. Therefore here, at each run, r1 is erroneously increased by 32 - 16 = 16 bytes. This was done that way in order to pass the tail call count from caller to callee through the stack. As powerpc32 doesn't have a red zone in the stack, it was necessary the maintain the stack as is for the tail call. But it was not anticipated that the BPF frame size could be different. Let's take a new approach. Use register r4 to carry the tail call count during the tail call, and save it into the stack at function entry if required. This means the input parameter must be in r3, which is more correct as it is a 32 bits parameter, then tail call better match with normal BPF function entry, the down side being that we move that input parameter back and forth between r3 and r4. That can be optimised later. Doing that also has the advantage of maximising the common parts between tail calls and a normal function exit. With the fix, tail call tests are now successfull: test_bpf: #0 Tail call leaf jited:1 53 PASS test_bpf: #1 Tail call 2 jited:1 115 PASS test_bpf: #2 Tail call 3 jited:1 154 PASS test_bpf: #3 Tail call 4 jited:1 165 PASS test_bpf: #4 Tail call load/store leaf jited:1 101 PASS test_bpf: #5 Tail call load/store jited:1 141 PASS test_bpf: #6 Tail call error path, max count reached jited:1 994 PASS test_bpf: #7 Tail call count preserved across function calls jited:1 140975 PASS test_bpf: #8 Tail call error path, NULL target jited:1 110 PASS test_bpf: #9 Tail call error path, index out of range jited:1 69 PASS test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed]
There is heap-based buffer overflow in Linux kernel, all versions up to, excluding 5.3, in the marvell wifi chip driver in Linux kernel, that allows local users to cause a denial of service(system crash) or possibly execute arbitrary code.
A vulnerability was found in Linux Kernel, where a Heap Overflow was found in mwifiex_set_wmm_params() function of Marvell Wifi Driver.
There is heap-based buffer overflow in kernel, all versions up to, excluding 5.3, in the marvell wifi chip driver in Linux kernel, that allows local users to cause a denial of service(system crash) or possibly execute arbitrary code.
In the Linux kernel, the following vulnerability has been resolved: nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long. UBSAN reports this problem: UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x170 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 ubsan_epilogue+0x10/0x54 __ubsan_handle_shift_out_of_bounds+0x180/0x194 __nvmem_cell_read+0x1ec/0x21c nvmem_cell_read+0x58/0x94 nvmem_cell_read_variable_common+0x4c/0xb0 nvmem_cell_read_variable_le_u32+0x40/0x100 a6xx_gpu_init+0x170/0x2f4 adreno_bind+0x174/0x284 component_bind_all+0xf0/0x264 msm_drm_bind+0x1d8/0x7a0 try_to_bring_up_master+0x164/0x1ac __component_add+0xbc/0x13c component_add+0x20/0x2c dp_display_probe+0x340/0x384 platform_probe+0xc0/0x100 really_probe+0x110/0x304 __driver_probe_device+0xb8/0x120 driver_probe_device+0x4c/0xfc __device_attach_driver+0xb0/0x128 bus_for_each_drv+0x90/0xdc __device_attach+0xc8/0x174 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 deferred_probe_work_func+0x7c/0xb8 process_one_work+0x128/0x21c process_scheduled_works+0x40/0x54 worker_thread+0x1ec/0x2a8 kthread+0x138/0x158 ret_from_fork+0x10/0x20 Fix it by making sure there are any bits to mask out.
A flaw was found in unrestricted eBPF usage by the BPF_BTF_LOAD, leading to a possible out-of-bounds memory write in the Linux kernel’s BPF subsystem due to the way a user loads BTF. This flaw allows a local user to crash or escalate their privileges on the system.
In the Linux kernel, the following vulnerability has been resolved: net/smc: fix wrong list_del in smc_lgr_cleanup_early smc_lgr_cleanup_early() meant to delete the link group from the link group list, but it deleted the list head by mistake. This may cause memory corruption since we didn't remove the real link group from the list and later memseted the link group structure. We got a list corruption panic when testing: [ Â 231.277259] list_del corruption. prev->next should be ffff8881398a8000, but was 0000000000000000 [ Â 231.278222] ------------[ cut here ]------------ [ Â 231.278726] kernel BUG at lib/list_debug.c:53! [ Â 231.279326] invalid opcode: 0000 [#1] SMP NOPTI [ Â 231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435 [ Â 231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014 [ Â 231.281248] Workqueue: events smc_link_down_work [ Â 231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90 [ Â 231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c 60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f> 0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc [ Â 231.284146] RSP: 0018:ffffc90000033d58 EFLAGS: 00010292 [ Â 231.284685] RAX: 0000000000000054 RBX: ffff8881398a8000 RCX: 0000000000000000 [ Â 231.285415] RDX: 0000000000000001 RSI: ffff88813bc18040 RDI: ffff88813bc18040 [ Â 231.286141] RBP: ffffffff8305ad40 R08: 0000000000000003 R09: 0000000000000001 [ Â 231.286873] R10: ffffffff82803da0 R11: ffffc90000033b90 R12: 0000000000000001 [ Â 231.287606] R13: 0000000000000000 R14: ffff8881398a8000 R15: 0000000000000003 [ Â 231.288337] FS: Â 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ Â 231.289160] CS: Â 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ Â 231.289754] CR2: 0000000000e72058 CR3: 000000010fa96006 CR4: 00000000003706f0 [ Â 231.290485] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ Â 231.291211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ Â 231.291940] Call Trace: [ Â 231.292211] Â smc_lgr_terminate_sched+0x53/0xa0 [ Â 231.292677] Â smc_switch_conns+0x75/0x6b0 [ Â 231.293085] Â ? update_load_avg+0x1a6/0x590 [ Â 231.293517] Â ? ttwu_do_wakeup+0x17/0x150 [ Â 231.293907] Â ? update_load_avg+0x1a6/0x590 [ Â 231.294317] Â ? newidle_balance+0xca/0x3d0 [ Â 231.294716] Â smcr_link_down+0x50/0x1a0 [ Â 231.295090] Â ? __wake_up_common_lock+0x77/0x90 [ Â 231.295534] Â smc_link_down_work+0x46/0x60 [ Â 231.295933] Â process_one_work+0x18b/0x350
An out-of-bounds (OOB) memory write flaw was found in the Linux kernel’s watch_queue event notification subsystem. This flaw can overwrite parts of the kernel state, potentially allowing a local user to gain privileged access or cause a denial of service on the system.
In the Linux kernel, the following vulnerability has been resolved: spi: bcm2835: Fix out-of-bounds access with more than 4 slaves Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()") limited the number of slaves to 3 at compile-time. The limitation was necessitated by a statically-sized array prepare_cs[] in the driver private data which contains a per-slave register value. The commit sought to enforce the limitation at run-time by setting the controller's num_chipselect to 3: Slaves with a higher chipselect are rejected by spi_add_device(). However the commit neglected that num_chipselect only limits the number of *native* chipselects. If GPIO chipselects are specified in the device tree for more than 3 slaves, num_chipselect is silently raised by of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to the statically-sized array prepare_cs[]. As a bandaid fix which is backportable to stable, raise the number of allowed slaves to 24 (which "ought to be enough for anybody"), enforce the limitation on slave ->setup and revert num_chipselect to 3 (which is the number of native chipselects supported by the controller). An upcoming for-next commit will allow an arbitrary number of slaves.
In the Linux kernel, the following vulnerability has been resolved: HID: betop: fix slab-out-of-bounds Write in betop_probe Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver. The problem is the driver assumes the device must have an input report but some malicious devices violate this assumption. So this patch checks hid_device's input is non empty before it's been used.
In the Linux kernel, the following vulnerability has been resolved: vduse: fix memory corruption in vduse_dev_ioctl() The "config.offset" comes from the user. There needs to a check to prevent it being out of bounds. The "config.offset" and "dev->config_size" variables are both type u32. So if the offset if out of bounds then the "dev->config_size - config.offset" subtraction results in a very high u32 value. The out of bounds offset can result in memory corruption.
In the Linux kernel, the following vulnerability has been resolved: comedi: dt9812: fix DMA buffers on stack USB transfer buffers are typically mapped for DMA and must not be allocated on the stack or transfers will fail. Allocate proper transfer buffers in the various command helpers and return an error on short transfers instead of acting on random stack data. Note that this also fixes a stack info leak on systems where DMA is not used as 32 bytes are always sent to the device regardless of how short the command is.
In the Linux kernel, the following vulnerability has been resolved: net/tls: Fix flipped sign in tls_err_abort() calls sk->sk_err appears to expect a positive value, a convention that ktls doesn't always follow and that leads to memory corruption in other code. For instance, [kworker] tls_encrypt_done(..., err=<negative error from crypto request>) tls_err_abort(.., err) sk->sk_err = err; [task] splice_from_pipe_feed ... tls_sw_do_sendpage if (sk->sk_err) { ret = -sk->sk_err; // ret is positive splice_from_pipe_feed (continued) ret = actor(...) // ret is still positive and interpreted as bytes // written, resulting in underflow of buf->len and // sd->len, leading to huge buf->offset and bogus // addresses computed in later calls to actor() Fix all tls_err_abort() callers to pass a negative error code consistently and centralize the error-prone sign flip there, throwing in a warning to catch future misuse and uninlining the function so it really does only warn once.
In the Linux kernel, the following vulnerability has been resolved: virtio-net: Add validation for used length This adds validation for used length (might come from an untrusted device) to avoid data corruption or loss.
In the Linux kernel, the following vulnerability has been resolved: bus: mhi: core: Validate channel ID when processing command completions MHI reads the channel ID from the event ring element sent by the device which can be any value between 0 and 255. In order to prevent any out of bound accesses, add a check against the maximum number of channels supported by the controller and those channels not configured yet so as to skip processing of that event ring element.
In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT Fix an Oopsable condition in pnfs_mark_request_commit() when we're putting a set of writes on the commit list to reschedule them after a failed pNFS attempt.
In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix transfer-buffer overflows The driver uses endpoint-sized USB transfer buffers but up until recently had no sanity checks on the sizes. Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize of usb endpoints found") inadvertently fixed NULL-pointer dereferences when accessing the transfer buffers in case a malicious device has a zero wMaxPacketSize. Make sure to allocate buffers large enough to handle also the other accesses that are done without a size check (e.g. byte 18 in vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond the buffers, for example, when doing descriptor fuzzing. The original driver was for a low-speed device with 8-byte buffers. Support was later added for a device that uses bulk transfers and is presumably a full-speed device with a maximum 64-byte wMaxPacketSize.
In the Linux kernel, the following vulnerability has been resolved: video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow Coverity complains of a possible buffer overflow. However, given the 'static' scope of nvidia_setup_i2c_bus() it looks like that can't happen after examiniing the call sites. CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW) 1. fixed_size_dest: You might overrun the 48-character fixed-size string chan->adapter.name by copying name without checking the length. 2. parameter_as_source: Note: This defect has an elevated risk because the source argument is a parameter of the current function. 89 strcpy(chan->adapter.name, name); Fix this warning by using strscpy() which will silence the warning and prevent any future buffer overflows should the names used to identify the channel become much longer.
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix a buffer overflow in otx2_set_rxfh_context() This function is called from ethtool_set_rxfh() and "*rss_context" comes from the user. Add some bounds checking to prevent memory corruption.
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix even more out of bound writes from debugfs CVE-2021-42327 was fixed by: commit f23750b5b3d98653b31d4469592935ef6364ad67 Author: Thelford Williams <tdwilliamsiv@gmail.com> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland)