A command injection vulnerability in the DDNS service configuration of Western Digital My Cloud OS 5 devices running firmware versions prior to 5.26.119 allows an attacker to execute code in the context of the root user.

A vulnerability in the FTP service of Western Digital My Cloud OS 5 devices running firmware versions prior to 5.26.119 allows an attacker to read and write arbitrary files. This could lead to a full NAS compromise and would give remote execution capabilities to the attacker.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that was caused by a command that read files from a privileged location and created a system command without sanitizing the read data. This command could be triggered by an attacker remotely to cause code execution and gain a reverse shell in Western Digital My Cloud OS 5 devices.This issue affects My Cloud OS 5: before 5.26.119.

An authentication bypass issue via spoofing was discovered in the token-based authentication mechanism that could allow an attacker to carry out an impersonation attack. This issue affects My Cloud OS 5 devices: before 5.26.202.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.07.118. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to gain access to the device.

My Cloud OS 5 was vulnerable to a pre-authenticated stack overflow vulnerability on the FTP service that could be exploited by unauthenticated attackers on the network. Addressed the vulnerability by adding defenses against stack overflow issues.

The combination of primitives offered by SMB and AFP in their default configuration allows the arbitrary writing of files. By exploiting these combination of primitives, an attacker can execute arbitrary code.

On Western Digital My Cloud OS 5 devices before 5.06.115, the NAS Admin dashboard has an authentication bypass vulnerability that could allow an unauthenticated user to execute privileged commands on the device.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie, because of insufficient validation of URI paths.

An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie. (In addition, an upload endpoint could then be used by an authenticated administrator to upload executable PHP scripts.)

An issue was discovered on Western Digital My Cloud NAS devices before 5.04.114. They allow remote code execution with resultant escalation of privileges.

Addressed remote code execution vulnerability in cgi_api.php that allowed escalation of privileges in Western Digital My Cloud NAS devices prior to 5.04.114.

Addressed remote code execution vulnerability in DsdkProxy.php due to insufficient sanitization and insufficient validation of user input in Western Digital My Cloud NAS devices prior to 5.04.114

Addressed remote code execution vulnerability in AvailableApps.php that allowed escalation of privileges in Western Digital My Cloud NAS devices prior to 5.04.114 (issue 3 of 3).

Addressed remote code execution vulnerability in reg_device.php due to insufficient validation of user input.in Western Digital My Cloud Devices prior to 5.4.1140.

A remote code execution vulnerability was discovered on Western Digital My Cloud devices where an attacker could trick a NAS device into loading through an unsecured HTTP call. This was a result insufficient verification of calls to the device. The vulnerability was addressed by disabling checks for internet connectivity using HTTP.

Addressed multiple stack buffer overflow vulnerabilities that could allow an attacker to carry out escalation of privileges through unauthorized remote code execution in Western Digital My Cloud devices before 5.04.114.

A command injection remote code execution vulnerability was discovered on Western Digital My Cloud Devices that could allow an attacker to execute arbitrary system commands on the device. The vulnerability was addressed by escaping individual arguments to shell functions coming from user input.

Addressed a remote code execution vulnerability by resolving a command injection vulnerability and closing an AWS S3 bucket that potentially allowed an attacker to execute unsigned code on My Cloud Home devices.

Western Digital WD My Book World through II 1.02.12 suffers from Broken Authentication, which allows an attacker to access the /admin/ directory without credentials. An attacker can easily enable SSH from /admin/system_advanced.php?lang=en and login with the default root password welc0me.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability that could allow an attacker to write files to locations with certain critical filesystem types leading to remote code execution was discovered in Western Digital My Cloud Home, My Cloud Home Duo, SanDisk ibi and Western Digital My Cloud OS 5 devices. This issue requires an authentication bypass issue to be triggered before this can be exploited.  This issue affects My Cloud Home and My Cloud Home Duo: before 9.4.0-191; ibi: before 9.4.0-191; My Cloud OS 5: before 5.26.202.

Post-authentication remote command injection vulnerability in Western Digital My Cloud OS 5 devices that could allow an attacker to execute code in the context of the root user on vulnerable CGI files. This vulnerability can only be exploited over the network and the attacker must already have admin/root privileges to carry out the exploit. An authentication bypass is required for this exploit, thereby making it more complex. The attack may not require user interaction. Since an attacker must already be authenticated, the confidentiality impact is low while the integrity and availability impact is high.  This issue affects My Cloud OS 5 devices: before 5.26.300.

A post-authentication remote command injection vulnerability in a CGI file in Western Digital My Cloud OS 5 devices that could allow an attacker to build files with redirects and execute larger payloads. This issue affects My Cloud OS 5 devices: before 5.26.300.

A malicious user on the same LAN could use DNS spoofing followed by a command injection attack to trick a NAS device into loading through an unsecured HTTP call. Addressed this vulnerability by disabling checks for internet connectivity using HTTP.

Input passed to the Pdf() function is shell escaped and passed to child_process.exec() during PDF rendering. However, the shell escape does not properly encode all special characters, namely, semicolon and curly braces. This can be abused to achieve command execution. This problem affects nodepdf 1.3.0.

A vulnerability in lack of validation of user-supplied parameters pass to XML-RPC calls on SonicWall Global Management System (GMS) virtual appliance's, allow remote user to execute arbitrary code. This vulnerability affected GMS version 8.1 and earlier.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

D-Link DIR810LA1_FW102B22 was discovered to contain a command injection vulnerability via the Ping_addr function.

A vulnerability was identified in Tenda AC20 16.03.08.12. Affected is the function websFormDefine of the file /goform/telnet of the component Telnet Service. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Aria Operations for Networks contains a command injection vulnerability. A malicious actor with network access to VMware Aria Operations for Networks may be able to perform a command injection attack resulting in remote code execution.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A pre-auth command injection vulnerability in the warn-proceed handler of Sophos Web Appliance older than version 4.3.10.4 allows execution of arbitrary code.

D-Link DSL-2750B devices before 1.05 allow remote unauthenticated command injection via the login.cgi cli parameter, as exploited in the wild in 2016 through 2022.

(1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5.5.0 allow remote attackers to execute arbitrary commands.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, and v5.4.5 for AirSync firmware. For example, Nanostation5 (Air OS) is affected.

A vulnerability, which was classified as critical, was found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. Affected is an unknown function of the component Static Routing Configuration Handler. The manipulation of the argument next-hop-interface leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. VDB-223302 is the identifier assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

Btrbk before 0.31.2 allows command execution because of the mishandling of remote hosts filtering SSH commands using ssh_filter_btrbk.sh in authorized_keys.

A vulnerability, which was classified as critical, has been found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. This issue affects some unknown processing of the component NAT Configuration Handler. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier VDB-223301 was assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

Command Injection in GitHub repository microweber/microweber prior to 1.3.3.

An issue was identified in GitLab CE/EE affecting all versions from 1.0 prior to 15.8.5, 15.9 prior to 15.9.4, and 15.10 prior to 15.10.1 where non-printable characters gets copied from clipboard, allowing unexpected commands to be executed on victim machine.

The isMail transport in PHPMailer before 5.2.20 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code by leveraging improper interaction between the escapeshellarg function and internal escaping performed in the mail function in PHP. NOTE: this vulnerability exists because of an incorrect fix for CVE-2016-10033.

A command-injection vulnerability in the Image Upload function of the NASCENT RemKon Device Manager 4.0.0.0 allows attackers to execute arbitrary commands, as root, via shell metacharacters in the filename parameter to assets/index.php.

Baicells EG7035-M11 devices with firmware through BCE-ODU-1.0.8 are vulnerable to improper code exploitation via HTTP GET command injections. Commands are executed using pre-login execution and executed with root permissions. The following methods have been tested and validated by a 3rd party analyst and have been confirmed exploitable special thanks to Lionel Musonza for the discovery.

A vulnerability has been found in Netgear WNDR3700v2 1.0.1.14 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221152.

A command injection vulnerability in egg-scripts <v2.8.1 allows arbitrary shell command execution through a maliciously crafted command line argument.

A vulnerability was found in TRENDnet TEW-652BRP 3.04b01. It has been classified as critical. Affected is an unknown function of the file ping.ccp of the component Web Interface. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-220020.