fs/ext4/extents.c in the Linux kernel through 5.1.2 does not zero out the unused memory region in the extent tree block, which might allow local users to obtain sensitive information by reading uninitialized data in the filesystem.

In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter).

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix leak of blob encryption key Trusted keys unseal the key blob on load, but keep the sealed payload in the blob field so that every subsequent read (export) will simply convert this field to hex and send it to userspace. With DCP-based trusted keys, we decrypt the blob encryption key (BEK) in the Kernel due hardware limitations and then decrypt the blob payload. BEK decryption is done in-place which means that the trusted key blob field is modified and it consequently holds the BEK in plain text. Every subsequent read of that key thus send the plain text BEK instead of the encrypted BEK to userspace. This issue only occurs when importing a trusted DCP-based key and then exporting it again. This should rarely happen as the common use cases are to either create a new trusted key and export it, or import a key blob and then just use it without exporting it again. Fix this by performing BEK decryption and encryption in a dedicated buffer. Further always wipe the plain text BEK buffer to prevent leaking the key via uninitialized memory.

net/core/ethtool.c in the Linux kernel before 2.6.36 does not initialize certain data structures, which allows local users to obtain potentially sensitive information from kernel heap memory by leveraging the CAP_NET_ADMIN capability for an ethtool ioctl call.

The actions implementation in the network queueing functionality in the Linux kernel before 2.6.36-rc2 does not properly initialize certain structure members when performing dump operations, which allows local users to obtain potentially sensitive information from kernel memory via vectors related to (1) the tcf_gact_dump function in net/sched/act_gact.c, (2) the tcf_mirred_dump function in net/sched/act_mirred.c, (3) the tcf_nat_dump function in net/sched/act_nat.c, (4) the tcf_simp_dump function in net/sched/act_simple.c, and (5) the tcf_skbedit_dump function in net/sched/act_skbedit.c.

The xfs_ioc_fsgetxattr function in fs/xfs/linux-2.6/xfs_ioctl.c in the Linux kernel before 2.6.36-rc4 does not initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an ioctl call.

A use-after-free vulnerability was found in iscsi_sw_tcp_session_create in drivers/scsi/iscsi_tcp.c in SCSI sub-component in the Linux Kernel. In this flaw an attacker could leak kernel internal information.

A flaw that boot CPU could be vulnerable for the speculative execution behavior kind of attacks in the Linux kernel X86 CPU Power management options functionality was found in the way user resuming CPU from suspend-to-RAM. A local user could use this flaw to potentially get unauthorized access to some memory of the CPU similar to the speculative execution behavior kind of attacks.

Integer overflow in the btrfs_ioctl_clone function in fs/btrfs/ioctl.c in the Linux kernel before 2.6.35 might allow local users to obtain sensitive information via a BTRFS_IOC_CLONE_RANGE ioctl call.

In the Linux kernel through 5.13.7, an unprivileged BPF program can obtain sensitive information from kernel memory via a Speculative Store Bypass side-channel attack because a certain preempting store operation does not necessarily occur before a store operation that has an attacker-controlled value.

An information disclosure vulnerability exists in multiple ManageEngine products that can result in encryption keys being exposed. A low-privileged OS user with access to the host where an affected ManageEngine product is installed can view and use the exposed key to decrypt product database passwords. This allows the user to access the ManageEngine product database.

A flaw possibility of memory leak in the Linux kernel cpu_entry_area mapping of X86 CPU data to memory was found in the way user can guess location of exception stack(s) or other important data. A local user could use this flaw to get access to some important data with expected location in memory.

The swiotlb_print_info function in lib/swiotlb.c in the Linux kernel through 4.14.14 allows local users to obtain sensitive address information by reading dmesg data from a "software IO TLB" printk call.

Copy_from_user on 64-bit versions of the Linux kernel does not implement the __uaccess_begin_nospec allowing a user to bypass the "access_ok" check and pass a kernel pointer to copy_from_user(). This would allow an attacker to leak information. We recommend upgrading beyond commit 74e19ef0ff8061ef55957c3abd71614ef0f42f47

The get_random_int function in drivers/char/random.c in the Linux kernel before 2.6.30 produces insufficiently random numbers, which allows attackers to predict the return value, and possibly defeat protection mechanisms based on randomization, via vectors that leverage the function's tendency to "return the same value over and over again for long stretches of time."

In the Linux kernel, the following vulnerability has been resolved: swiotlb: fix info leak with DMA_FROM_DEVICE The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce.

sec_attest_info in drivers/accel/habanalabs/common/habanalabs_ioctl.c in the Linux kernel through 6.6.5 allows an information leak to user space because info->pad0 is not initialized.

IBM EntireX 11.1 could allow a local user to obtain sensitive information when a detailed technical error message is returned. This information could be used in further attacks against the system.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix possible bogus match in nf_osf_find() nf_osf_find() incorrectly returns true on mismatch, this leads to copying uninitialized memory area in nft_osf which can be used to leak stale kernel stack data to userspace.

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix out-of-bounds read when setting HMAC data. The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET.

A flaw named "EntryBleed" was found in the Linux Kernel Page Table Isolation (KPTI). This issue could allow a local attacker to leak KASLR base via prefetch side-channels based on TLB timing for Intel systems.

drivers/scsi/stex.c in the Linux kernel through 5.19.9 allows local users to obtain sensitive information from kernel memory because stex_queuecommand_lck lacks a memset for the PASSTHRU_CMD case.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find() Syzbot reports a warning as follows: ============================================ WARNING: CPU: 0 PID: 5075 at fs/mbcache.c:419 mb_cache_destroy+0x224/0x290 Modules linked in: CPU: 0 PID: 5075 Comm: syz-executor199 Not tainted 6.9.0-rc6-gb947cc5bf6d7 RIP: 0010:mb_cache_destroy+0x224/0x290 fs/mbcache.c:419 Call Trace: <TASK> ext4_put_super+0x6d4/0xcd0 fs/ext4/super.c:1375 generic_shutdown_super+0x136/0x2d0 fs/super.c:641 kill_block_super+0x44/0x90 fs/super.c:1675 ext4_kill_sb+0x68/0xa0 fs/ext4/super.c:7327 [...] ============================================ This is because when finding an entry in ext4_xattr_block_cache_find(), if ext4_sb_bread() returns -ENOMEM, the ce's e_refcnt, which has already grown in the __entry_find(), won't be put away, and eventually trigger the above issue in mb_cache_destroy() due to reference count leakage. So call mb_cache_entry_put() on the -ENOMEM error branch as a quick fix.

In the Linux kernel, the following vulnerability has been resolved: gpio: prevent potential speculation leaks in gpio_device_get_desc() Userspace may trigger a speculative read of an address outside the gpio descriptor array. Users can do that by calling gpio_ioctl() with an offset out of range. Offset is copied from user and then used as an array index to get the gpio descriptor without sanitization in gpio_device_get_desc(). This change ensures that the offset is sanitized by using array_index_nospec() to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc.

In the Linux kernel, the following vulnerability has been resolved: virtio-net: fix pages leaking when building skb in big mode We try to use build_skb() if we had sufficient tailroom. But we forget to release the unused pages chained via private in big mode which will leak pages. Fixing this by release the pages after building the skb in big mode.

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix one more kernel-infoleak in algo dumping During fuzz testing, the following issue was discovered: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x598/0x2a30 _copy_to_iter+0x598/0x2a30 __skb_datagram_iter+0x168/0x1060 skb_copy_datagram_iter+0x5b/0x220 netlink_recvmsg+0x362/0x1700 sock_recvmsg+0x2dc/0x390 __sys_recvfrom+0x381/0x6d0 __x64_sys_recvfrom+0x130/0x200 x64_sys_call+0x32c8/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was stored to memory at: copy_to_user_state_extra+0xcc1/0x1e00 dump_one_state+0x28c/0x5f0 xfrm_state_walk+0x548/0x11e0 xfrm_dump_sa+0x1e0/0x840 netlink_dump+0x943/0x1c40 __netlink_dump_start+0x746/0xdb0 xfrm_user_rcv_msg+0x429/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was created at: __kmalloc+0x571/0xd30 attach_auth+0x106/0x3e0 xfrm_add_sa+0x2aa0/0x4230 xfrm_user_rcv_msg+0x832/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Bytes 328-379 of 732 are uninitialized Memory access of size 732 starts at ffff88800e18e000 Data copied to user address 00007ff30f48aff0 CPU: 2 PID: 18167 Comm: syz-executor.0 Not tainted 6.8.11 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Fixes copying of xfrm algorithms where some random data of the structure fields can end up in userspace. Padding in structures may be filled with random (possibly sensitve) data and should never be given directly to user-space. A similar issue was resolved in the commit 8222d5910dae ("xfrm: Zero padding when dumping algos and encap") Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error The `nouveau_dmem_copy_one` function ensures that the copy push command is sent to the device firmware but does not track whether it was executed successfully. In the case of a copy error (e.g., firmware or hardware failure), the copy push command will be sent via the firmware channel, and `nouveau_dmem_copy_one` will likely report success, leading to the `migrate_to_ram` function returning a dirty HIGH_USER page to the user. This can result in a security vulnerability, as a HIGH_USER page that may contain sensitive or corrupted data could be returned to the user. To prevent this vulnerability, we allocate a zero page. Thus, in case of an error, a non-dirty (zero) page will be returned to the user.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an unprivileged regular user can cause an integer to be truncated, which may lead to denial of service or data tampering.

In the Linux kernel, the following vulnerability has been resolved: x86: fix user address masking non-canonical speculation issue It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical accesses in kernel space. And so using just the high bit to decide whether an access is in user space or kernel space ends up with the good old "leak speculative data" if you have the right gadget using the result: CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“ Now, the kernel surrounds the access with a STAC/CLAC pair, and those instructions end up serializing execution on older Zen architectures, which closes the speculation window. But that was true only up until Zen 5, which renames the AC bit [1]. That improves performance of STAC/CLAC a lot, but also means that the speculation window is now open. Note that this affects not just the new address masking, but also the regular valid_user_address() check used by access_ok(), and the asm version of the sign bit check in the get_user() helpers. It does not affect put_user() or clear_user() variants, since there's no speculative result to be used in a gadget for those operations.

IBM Sterling External Authentication Server 6.1.0 and IBM Sterling Secure Proxy 6.0.3 uses weaker than expected cryptographic algorithms during installation that could allow a local attacker to decrypt sensitive information. IBM X-Force ID: 231373.

IBM QRadar SIEM 7.4 and 7.5 could disclose sensitive information via a local service to a privileged user. IBM X-Force ID: 227366.

Insufficiently Protected Credentials vulnerability in the remote backups application on Western Digital My Cloud devices that could allow an attacker who has gained access to a relevant endpoint to use that information to access protected data. This issue affects: Western Digital My Cloud My Cloud versions prior to 5.25.124 on Linux.

kernel/bpf/verifier.c in the Linux kernel through 5.12.1 performs undesirable speculative loads, leading to disclosure of stack content via side-channel attacks, aka CID-801c6058d14a. The specific concern is not protecting the BPF stack area against speculative loads. Also, the BPF stack can contain uninitialized data that might represent sensitive information previously operated on by the kernel.

An issue was discovered in the Linux kernel before 5.11.11. qrtr_recvmsg in net/qrtr/qrtr.c allows attackers to obtain sensitive information from kernel memory because of a partially uninitialized data structure, aka CID-50535249f624.

An issue was discovered in the Linux kernel through 5.11.x. kernel/bpf/verifier.c performs undesirable out-of-bounds speculation on pointer arithmetic, leading to side-channel attacks that defeat Spectre mitigations and obtain sensitive information from kernel memory. Specifically, for sequences of pointer arithmetic operations, the pointer modification performed by the first operation is not correctly accounted for when restricting subsequent operations.

A flaw was found in s390 eBPF JIT in bpf_jit_insn in arch/s390/net/bpf_jit_comp.c in the Linux kernel. In this flaw, a local attacker with special user privilege can circumvent the verifier and may lead to a confidentiality problem.

A sensitive information disclosure vulnerability in Tableau Server 10.5, 2018.x, 2019.x, 2020.x released before June 26, 2020, could allow access to sensitive information in log files.

Insertion of Sensitive Information into Log File vulnerability in Hitachi Cosminexus Component Container allows local users to gain sensitive information.This issue affects Cosminexus Component Container: from 11-30 before 11-30-05, from 11-20 before 11-20-07, from 11-10 before 11-10-10, from 11-00 before 11-00-12, All versions of V8 and V9.

Insertion of Sensitive Information into Log File vulnerability in Hitachi Ops Center Administrator allows local users to gain sensitive information.This issue affects Hitachi Ops Center Administrator: before 11.0.1.

IBM QRadar SIEM 7.3, 7.4, and 7.5 stores potentially sensitive information in log files that could be read by an user with access to creating domains. IBM X-Force ID: 211037.

Tor Browser through 10.5.6 and 11.x through 11.0a4 allows a correlation attack that can compromise the privacy of visits to v2 onion addresses. Exact timestamps of these onion-service visits are logged locally, and an attacker might be able to compare them to timestamp data collected by the destination server (or collected by a rogue site within the Tor network).

IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.6.0 stores potentially sensitive information in log files that could be read by a privileged user. IBM X-Force ID: 213645.

The klsi_105_get_line_state function in drivers/usb/serial/kl5kusb105.c in the Linux kernel before 4.9.5 places uninitialized heap-memory contents into a log entry upon a failure to read the line status, which allows local users to obtain sensitive information by reading the log.

__btrfs_free_extent in fs/btrfs/extent-tree.c in the Linux kernel through 5.3.12 calls btrfs_print_leaf in a certain ENOENT case, which allows local users to obtain potentially sensitive information about register values via the dmesg program. NOTE: The BTRFS development team disputes this issues as not being a vulnerability because “1) The kernel provide facilities to restrict access to dmesg - dmesg_restrict=1 sysctl option. So it's really up to the system administrator to judge whether dmesg access shall be disallowed or not. 2) WARN/WARN_ON are widely used macros in the linux kernel. If this CVE is considered valid this would mean there are literally thousands CVE lurking in the kernel - something which clearly is not the case.

Sensitive information leak through log files. The following products are affected: Acronis Cyber Protect 15 (Linux, Windows) before build 35979.

An issue was discovered in EMC ScaleIO 2.0.1.x. In a Linux environment, one of the support scripts saves the credentials of the ScaleIO MDM user who executed the script in clear text in temporary log files. The temporary files may potentially be read by an unprivileged user with access to the server where the script was executed to recover exposed credentials.

IBM InfoSphere Information Server 11.7 could disclose sensitive user credentials from log files during new installation of the product.

The aoedisk_debugfs_show function in drivers/block/aoe/aoeblk.c in the Linux kernel through 4.16.4rc4 allows local users to obtain sensitive address information by reading "ffree: " lines in a debugfs file.

Hitachi Vantara Pentaho Business Analytics Server versions before 9.4.0.0 and 9.3.0.1, including 8.3.x with the Big Data Plugin expose the username and password of clusters in clear text into system logs. 

IBM App Connect Enterprise 11.0.0.17 through 11.0.0.19 and 12.0.4.0 and 12.0.5.0 contains an unspecified vulnerability in the Discovery Connector nodes which may cause a 3rd party system’s credentials to be exposed to a privileged attacker. IBM X-Force ID: 238211.