Memory corruption issues in Intel(R) WIFI Drivers before version 21.40 may allow a privileged user to potentially enable escalation of privilege, denial of service, and information disclosure via local access.
Out of bound write can happen in WMI firmware event handler due to lack of validation of data received from WLAN firmware in Snapdragon Auto, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, IPQ4019, IPQ8064, IPQ8074, MDM9206, MDM9207C, MDM9607, MDM9615, MDM9640, MDM9650, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8996AU, QCA6174A, QCA6574AU, QCA9377, QCA9379, QCA9980, QCN7605, QCS605, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SDX24, SM6150, SM7150, SM8150, SXR1130
An out-of-bounds memory access flaw was found in the Linux kernel’s TUN/TAP device driver functionality in how a user generates a malicious (too big) networking packet when napi frags is enabled. This flaw allows a local user to crash or potentially escalate their privileges on the system.
In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix address emission with tag-based KASAN enabled When BPF_TRAMP_F_CALL_ORIG is enabled, the address of a bpf_tramp_image struct on the stack is passed during the size calculation pass and an address on the heap is passed during code generation. This may cause a heap buffer overflow if the heap address is tagged because emit_a64_mov_i64() will emit longer code than it did during the size calculation pass. The same problem could occur without tag-based KASAN if one of the 16-bit words of the stack address happened to be all-ones during the size calculation pass. Fix the problem by assuming the worst case (4 instructions) when calculating the size of the bpf_tramp_image address emission.
A flaw was found in the Xorg-x11-server. The specific flaw exists within the handling of ProcXkbSetDeviceInfo requests. The issue results from the lack of proper validation of user-supplied data, which can result in a memory access past the end of an allocated buffer. This flaw allows an attacker to escalate privileges and execute arbitrary code in the context of root.
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOBs when building SMB2_IOCTL request When using encryption, either enforced by the server or when using 'seal' mount option, the client will squash all compound request buffers down for encryption into a single iov in smb2_set_next_command(). SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the SMB2_IOCTL request in the first iov, and if the user passes an input buffer that is greater than 328 bytes, smb2_set_next_command() will end up writing off the end of @rqst->iov[0].iov_base as shown below: mount.cifs //srv/share /mnt -o ...,seal ln -s $(perl -e "print('a')for 1..1024") /mnt/link BUG: KASAN: slab-out-of-bounds in smb2_set_next_command.cold+0x1d6/0x24c [cifs] Write of size 4116 at addr ffff8881148fcab8 by task ln/859 CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] print_report+0x156/0x4d9 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] ? __virt_addr_valid+0x145/0x310 ? __phys_addr+0x46/0x90 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_report+0xda/0x110 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_check_range+0x10f/0x1f0 __asan_memcpy+0x3c/0x60 smb2_set_next_command.cold+0x1d6/0x24c [cifs] smb2_compound_op+0x238c/0x3840 [cifs] ? kasan_save_track+0x14/0x30 ? kasan_save_free_info+0x3b/0x70 ? vfs_symlink+0x1a1/0x2c0 ? do_symlinkat+0x108/0x1c0 ? __pfx_smb2_compound_op+0x10/0x10 [cifs] ? kmem_cache_free+0x118/0x3e0 ? cifs_get_writable_path+0xeb/0x1a0 [cifs] smb2_get_reparse_inode+0x423/0x540 [cifs] ? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? __kmalloc_noprof+0x37c/0x480 ? smb2_create_reparse_symlink+0x257/0x490 [cifs] ? smb2_create_reparse_symlink+0x38f/0x490 [cifs] smb2_create_reparse_symlink+0x38f/0x490 [cifs] ? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs] ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs] cifs_symlink+0x24f/0x960 [cifs] ? __pfx_make_vfsuid+0x10/0x10 ? __pfx_cifs_symlink+0x10/0x10 [cifs] ? make_vfsgid+0x6b/0xc0 ? generic_permission+0x96/0x2d0 vfs_symlink+0x1a1/0x2c0 do_symlinkat+0x108/0x1c0 ? __pfx_do_symlinkat+0x10/0x10 ? strncpy_from_user+0xaa/0x160 __x64_sys_symlinkat+0xb9/0xf0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08d75c13bb
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds write in trie_get_next_key() trie_get_next_key() allocates a node stack with size trie->max_prefixlen, while it writes (trie->max_prefixlen + 1) nodes to the stack when it has full paths from the root to leaves. For example, consider a trie with max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ... 0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with .prefixlen = 8 make 9 nodes be written on the node stack with size 8.
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Prevent out of bounds access in performance query extensions Check that the number of perfmons userspace is passing in the copy and reset extensions is not greater than the internal kernel storage where the ids will be copied into.
In hwservicemanager, there is a possible out of bounds write due to freeing a wild pointer. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-155646800
In phNxpNciHal_send_ese_hal_cmd of phNxpNciHal_ext.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10Android ID: A-139736386
In createWithSurfaceParent of Client.cpp, there is a possible out of bounds write due to type confusion. This could lead to local escalation of privilege in the graphics server with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10Android ID: A-150226994
Memory corruption during the FRS UDS generation process.
Memory corruption while reading secure file.
A flaw was found in the bash package, where a heap-buffer overflow can occur in valid parameter_transform. This issue may lead to memory problems.
A memory corruption issue was addressed with improved memory handling. This issue is fixed in macOS Mojave 10.14.5. An application may be able to execute arbitrary code with system privileges.
An issue was discovered on Samsung mobile devices with P(9.0) (Exynos chipsets) software. The Wi-Fi kernel drivers have a stack overflow. The Samsung IDs are SVE-2019-14965, SVE-2019-14966, SVE-2019-14968, SVE-2019-14969, SVE-2019-14970, SVE-2019-14980, SVE-2019-14981, SVE-2019-14982, SVE-2019-14983, SVE-2019-14984, SVE-2019-15122, SVE-2019-15123 (November 2019).
In FuseDaemon.cpp, there is a possible out of bounds write due to memory corruption. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
Memory corruption while triggering commands in the PlayReady Trusted application.
In writeInplace of Parcel.cpp, there is a possible out of bounds write. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
An issue was discovered on Samsung mobile devices with N(7.1), O(8.x), and P(9.0) (Exynos chipsets) software. There is a stack overflow in the kernel driver. The Samsung ID is SVE-2019-15034 (November 2019).
A memory corruption vulnerability exists in the Shared String Table Record Parser implementation in xls2csv utility version 0.95. A specially crafted malformed file can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.
In the Linux kernel before 4.20.12, net/ipv4/netfilter/nf_nat_snmp_basic_main.c in the SNMP NAT module has insufficient ASN.1 length checks (aka an array index error), making out-of-bounds read and write operations possible, leading to an OOPS or local privilege escalation. This affects snmp_version and snmp_helper.
In nfa_hci_handle_admin_gate_rsp of nfa_hci_act.cc, there is a possible out of bound write due to missing bounds checks. This could lead to local escalation of privilege with system execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-8.0 Android-8.1 Android-9 Android-10Android ID: A-124524315
In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error Ensure index in rtl2832_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. [hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg]
In imgsys, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10363246; Issue ID: MSV-5779.
drivers/char/virtio_console.c in the Linux kernel 4.9.x and 4.10.x before 4.10.12 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist.
In the Linux kernel, the following vulnerability has been resolved: ocfs2: add bounds checking to ocfs2_xattr_find_entry() Add a paranoia check to make sure it doesn't stray beyond valid memory region containing ocfs2 xattr entries when scanning for a match. It will prevent out-of-bound access in case of crafted images.
In HID_DevAddRecord of hidd_api.cc, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege in the Bluetooth service with User execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android-9. Android ID: A-79946737.
In gt1x_debug_write_proc and gt1x_tool_write of drivers/input/touchscreen/mediatek/GT1151/gt1x_generic.c and gt1x_tools.c, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: Reset cid to con_num - 1 to stay in bounds In the function init_conns(), after the create_con() and create_cm() for loop if something fails. In the cleanup for loop after the destroy tag, we access out of bound memory because cid is set to clt_path->s.con_num. This commits resets the cid to clt_path->s.con_num - 1, to stay in bounds in the cleanup loop later.
Delta PMSoft versions 2.10 and prior have multiple stack-based buffer overflow vulnerabilities where a .ppm file can introduce a value larger than is readable by PMSoft's fixed-length stack buffer. This can cause the buffer to be overwritten, which may allow arbitrary code execution or cause the application to crash. CVSS v3 base score: 7.1; CVSS vector string: AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H. Delta Electronics recommends affected users update to at least PMSoft v2.11, which was made available as of March 22, 2018, or the latest available version.
In mtk_p2p_wext_set_key of drivers/misc/mediatek/connectivity/wlan/gen2/os/linux/gl_p2p.c, there is a possible OOB write due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
In get_binary of vendor/mediatek/proprietary/hardware/connectivity/gps/gps_hal/src/data_coder.c, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
In FT_ACDK_CCT_V2_OP_ISP_SET_TUNING_PARAS of Meta_CCAP_Para.cpp, there is a possible out of bounds write due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In oemCallback of ril.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
In /proc/driver/wmt_dbg driver, there are several possible out of bounds writes. These could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
In multiple functions of gl_proc.c, there is a buffer overwrite due to a missing bounds check. This could lead to escalation of privileges in the kernel.
Insufficient validation of environment variables in the telnet client supplied in Junos OS can lead to stack-based buffer overflows, which can be exploited to bypass veriexec restrictions on Junos OS. A stack-based overflow is present in the handling of environment variables when connecting via the telnet client to remote telnet servers. This issue only affects the telnet client — accessible from the CLI or shell — in Junos OS. Inbound telnet services are not affected by this issue. This issue affects: Juniper Networks Junos OS: 12.3 versions prior to 12.3R12-S13; 12.3X48 versions prior to 12.3X48-D80; 14.1X53 versions prior to 14.1X53-D130, 14.1X53-D49; 15.1 versions prior to 15.1F6-S12, 15.1R7-S4; 15.1X49 versions prior to 15.1X49-D170; 15.1X53 versions prior to 15.1X53-D237, 15.1X53-D496, 15.1X53-D591, 15.1X53-D69; 16.1 versions prior to 16.1R3-S11, 16.1R7-S4; 16.2 versions prior to 16.2R2-S9; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R1-S8, 17.2R2-S7, 17.2R3-S1; 17.3 versions prior to 17.3R3-S4; 17.4 versions prior to 17.4R1-S6, 17.4R2-S3, 17.4R3; 18.1 versions prior to 18.1R2-S4, 18.1R3-S3; 18.2 versions prior to 18.2R1-S5, 18.2R2-S2, 18.2R3; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S3, 18.3R2; 18.4 versions prior to 18.4R1-S2, 18.4R2.
In ResStringPool::setTo of ResourceTypes.cpp, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In the deserialization constructor of NanoAppFilter.java, there is a possible loss of data due to type confusion. This could lead to local escalation of privilege in the system server with no additional execution privileges needed. User interaction is not needed for exploitation.
In sw49408_irq_runtime_engine_debug of touch_sw49408.c, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
In rpc_msg_handler and related handlers of drivers/misc/mediatek/eccci/port_rpc.c, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
Parsing malformed project files in Omron CX-One versions 4.42 and prior, including the following applications: CX-FLnet versions 1.00 and prior, CX-Protocol versions 1.992 and prior, CX-Programmer versions 9.65 and prior, CX-Server versions 5.0.22 and prior, Network Configurator versions 3.63 and prior, and Switch Box Utility versions 1.68 and prior, may cause a heap-based buffer overflow.
In procfile_write of drivers/misc/mediatek/connectivity/wlan/gen2/os/linux/gl_proc.c, there is a possible OOB write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
In fm_set_stat of mediatek FM radio driver, there is a possible OOB write due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
In the MTK_FLP_MSG_HAL_DIAG_REPORT_DATA_NTF handler of flp2hal_- interface.c, there is a possible stack buffer overflow due to a missing bounds check. This could lead to local escalation of privilege in a privileged process with System execution privileges needed. User interaction is not needed for exploitation.
In IMSA_Recv_Thread and VT_IMCB_Thread of ImsaClient.cpp and VideoTelephony.c, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In store_upgrade and store_cmd of drivers/input/touchscreen/stm/ftm4_pdc.c, there are out of bound writes due to missing bounds checks or integer underflows. These could lead to escalation of privilege.
In the Mediatek Preloader, there are out of bounds reads and writes due to an exposed interface that allows arbitrary peripheral memory mapping with insufficient blacklisting/whitelisting. This could lead to local elevation of privilege, given physical access to the device with no additional execution privileges needed. User interaction is needed for exploitation.
in OpenHarmony v4.1.0 and prior versions allow a local attacker cause the common permission is upgraded to root and sensitive information leak through out-of-bounds write.