An arbitrary code execution vulnerability in Rockwell Automation Arena Simulation could let a malicious user insert unauthorized code into the software. This is done by writing beyond the designated memory area, which causes an access violation. Once inside, the threat actor can run harmful code on the system. This affects the confidentiality, integrity, and availability of the product. To trigger this, the user would unwittingly need to open a malicious file shared by the threat actor.

A heap-based memory buffer overflow vulnerability in Rockwell Automation Arena Simulation software could potentially allow a malicious user to insert unauthorized code into the software by overstepping the memory boundaries, which triggers an access violation. Once inside, the threat actor can run harmful code on the system. This affects the confidentiality, integrity, and availability of the product. To trigger this, the user would unwittingly need to open a malicious file shared by the threat actor.

A third-party vulnerability exists in the Rockwell Automation Arena® that could allow a threat actor to write beyond the boundaries of allocated memory in a DOE file. If exploited, a threat actor could leverage this vulnerability to execute arbitrary code. To exploit this vulnerability, a legitimate user must execute the malicious code crafted by the threat actor.

A third-party vulnerability exists in the Rockwell Automation Arena® that could allow a threat actor to write beyond the boundaries of allocated memory in a DOE file. If exploited, a threat actor could leverage this vulnerability to execute arbitrary code. To exploit this vulnerability, a legitimate user must execute the malicious code crafted by the threat actor.

An “out of bounds write” code execution vulnerability exists in the Rockwell Automation Arena® that could allow a threat actor to write beyond the boundaries of allocated memory in a DOE file. If exploited, a threat actor could leverage this vulnerability to execute arbitrary code. To exploit this vulnerability, a legitimate user must execute the malicious code crafted by the threat actor.

KEPServerEX is vulnerable to a buffer overflow which may allow an attacker to crash the product being accessed or leak information.

An issue was discovered in Rockwell Automation Logix5000 Programmable Automation Controller FRN 16.00 through 21.00 (excluding all firmware versions prior to FRN 16.00, which are not affected). By sending malformed common industrial protocol (CIP) packet, an attacker may be able to overflow a stack-based buffer and execute code on the controller or initiate a nonrecoverable fault resulting in a denial of service.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Kepware KEPServerEX 6.11.718.0. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of text encoding conversions. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-16486.

Products that use EDS Subsystem: Version 28.0.1 and prior (FactoryTalk Linx software (Previously called RSLinx Enterprise): Versions 6.00, 6.10, and 6.11, RSLinx Classic: Version 4.11.00 and prior, RSNetWorx software: Version 28.00.00 and prior, Studio 5000 Logix Designer software: Version 32 and prior) is vulnerable. A memory corruption vulnerability exists in the algorithm that matches square brackets in the EDS subsystem. This may allow an attacker to craft specialized EDS files to crash the EDSParser COM object, leading to denial-of-service conditions.

In all versions of FactoryTalk View SE, after bypassing memory corruption mechanisms found in the operating system, a local, authenticated attacker may corrupt the associated memory space allowing for arbitrary code execution. Rockwell Automation recommends applying patch 1126290. Before installing this patch, the patch rollup dated 06 Apr 2020 or later MUST be applied. 1066644 – Patch Roll-up for CPR9 SRx.

A memory abuse issue exists in the Rockwell Automation Arena® Simulation. A custom file can force Arena Simulation to read and write past the end of memory space. Successful use requires user action, such as opening a bad file or webpage. If used, a threat actor could execute code or disclose information.

A remote code execution security issue exists in the Rockwell Automation Arena®.  A crafted DOE file can force Arena Simulation to write beyond the boundaries of an allocated object. Exploitation requires user interaction, such as opening a malicious file within the software. If exploited, a threat actor could execute arbitrary code on the target system. The software must run under the context of the administrator in order to cause worse case impact. This is reflected in the Rockwell CVSS score, as AT:P.

KEPServerEX: v6.0 to v6.9, ThingWorx Kepware Server: v6.8 and v6.9, ThingWorx Industrial Connectivity: All versions, OPC-Aggregator: All versions, Rockwell Automation KEPServer Enterprise, GE Digital Industrial Gateway Server: v7.68.804 and v7.66, Software Toolbox TOP Server: All 6.x versions, are vulnerable to a heap-based buffer overflow. Opening a specifically crafted OPC UA message could allow an attacker to crash the server and potentially leak data.

KEPServerEX v6.0 to v6.9, ThingWorx Kepware Server v6.8 and v6.9, ThingWorx Industrial Connectivity (all versions), OPC-Aggregator (all versions), Rockwell Automation KEPServer Enterprise, GE Digital Industrial Gateway Server v7.68.804 and v7.66, and Software Toolbox TOP Server all 6.x versions, are vulnerable to a heap-based buffer overflow. Opening a specifically crafted OPC UA message could allow an attacker to crash the server and potentially leak data.

A heap overflow vulnerability exists within FactoryTalk Linx Version 6.11 and prior. This vulnerability could allow a remote, unauthenticated attacker to send malicious set attribute requests, which could result in the leaking of sensitive information. This information disclosure could lead to the bypass of address space layout randomization (ASLR).

A local code execution vulnerability exists in the Rockwell Automation Arena® due to a stack-based memory buffer overflow. The flaw is result of improper validation of user-supplied data. If exploited a threat actor can disclose information and execute arbitrary code on the system. To exploit the vulnerability a legitimate user must open a malicious DOE file.

A local code execution vulnerability exists in the Rockwell Automation Arena® due to a threat actor being able to write outside of the allocated memory buffer. The flaw is a result of improper validation of user-supplied data.  If exploited a threat actor can disclose information and execute arbitrary code on the system. To exploit the vulnerability a legitimate user must open a malicious DOE file.

Where this vulnerability exists in the Rockwell Automation 1756-EN4* Ethernet/IP communication products, it could allow a malicious user to cause a denial of service by asserting the target system through maliciously crafted CIP messages.

A local code execution vulnerability exists in the Rockwell Automation Arena® due to a threat actor being able to write outside of the allocated memory buffer. The flaw is a result of improper validation of user-supplied data.  If exploited a threat actor can disclose information and execute arbitrary code on the system. To exploit the vulnerability a legitimate user must open a malicious DOE file.

A local code execution vulnerability exists in the Rockwell Automation Arena® due to a threat actor being able to write outside of the allocated memory buffer. The flaw is a result of improper validation of user-supplied data.  If exploited a threat actor can disclose information and execute arbitrary code on the system. To exploit the vulnerability a legitimate user must open a malicious DOE file.

An attacker could send crafted SMTP packets to cause a denial-of-service condition where the controller enters a major non-recoverable faulted state (MNRF) in CompactLogix 5370 L1, L2, and L3 Controllers, Compact GuardLogix 5370 controllers, and Armor Compact GuardLogix 5370 Controllers Versions 20 - 30 and earlier.

In Rockwell Automation FactoryTalk Services Platform 2.90 and earlier, a remote unauthenticated attacker could send numerous crafted packets to service ports resulting in memory consumption that could lead to a partial or complete denial-of-service condition to the affected services.

Rockwell Automation RSLinx Classic Versions 4.00.01 and prior. This vulnerability may allow a remote, unauthenticated threat actor to intentionally send a malformed CIP packet to Port 44818, causing the RSLinx Classic application to terminate. The user will need to manually restart the software to regain functionality.

A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause a heap overflow condition on the affected device, which will cause the device to reload and result in a DoS condition. Cisco Bug IDs: CSCvg62730.

H3C GR-1200W MiniGRW1A0V100R006 was discovered to contain a stack overflow via the function set_tftp_upgrad.

A vulnerability classified as critical was found in Tenda AC500 2.0.1.9(1307). Affected by this vulnerability is the function formexeCommand of the file /goform/execCommand. The manipulation of the argument cmdinput leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-261145 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

open5gs v2.6.4 is vulnerable to Buffer Overflow. via /lib/core/abts.c.

There is a stack-overflow at ecma-regexp-object.c:535 in ecma_regexp_match in JerryScript 2.2.0.

A vulnerability was found in Tenda AC500 2.0.1.9(1307). It has been rated as critical. This issue affects the function formSetCfm of the file /goform/setcfm. The manipulation of the argument funcpara1 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261143. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

In Tenda AC15 V15.03.05.19, The function "xkjs_ver32" contains a stack-based buffer overflow vulnerability.

Sofia-SIP is an open-source SIP User-Agent library, compliant with the IETF RFC3261 specification. In affected versions Sofia-SIP **lacks both message length and attributes length checks** when it handles STUN packets, leading to controllable heap-over-flow. For example, in stun_parse_attribute(), after we get the attribute's type and length value, the length will be used directly to copy from the heap, regardless of the message's left size. Since network users control the overflowed length, and the data is written to heap chunks later, attackers may achieve remote code execution by heap grooming or other exploitation methods. The bug was introduced 16 years ago in sofia-sip 1.12.4 (plus some patches through 12/21/2006) to in tree libs with git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3774 d0543943-73ff-0310-b7d9-9358b9ac24b2. Users are advised to upgrade. There are no known workarounds for this vulnerability.

In Tenda AC15 V15.03.05.19, the function "getIfIp" contains a stack-based buffer overflow vulnerability.

Tenda AC5 V15.03.06.28 is vulnerable to Buffer Overflow via the initWebs function.

A buffer overflow in the NRSessionSearchResult parser in Bandai Namco FromSoftware Dark Souls III through 2022-03-19 allows remote attackers to execute arbitrary code via matchmaking servers, a different vulnerability than CVE-2021-34170.

D-Link DIR823G_V1.0.2B05 was discovered to contain a stack overflow via the NewPassword parameters in SetPasswdSettings.

Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble version was discovered to contain a heap overflow in the nav2_amcl process. This vulnerability is triggered via sending a crafted message to the component /initialpose.

An issue was discovered in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 9820, 9825, 980, 990, 850, 1080, 2100, 1280, 2200, 1330, 1380, 1480, 2400, 9110, W920, W930, W1000, Modem 5123, Modem 5300. The baseband software does not properly check the length specified by the CC (Call Control). This can lead to an Out-of-Bounds write.

Out-of-bounds Write vulnerability in mod_sed of Apache HTTP Server allows an attacker to overwrite heap memory with possibly attacker provided data. This issue affects Apache HTTP Server 2.4 version 2.4.52 and prior versions.

In the TP-Link RE365 V1_180213, there is a buffer overflow vulnerability due to the lack of length verification for the USER_AGENT field in /usr/bin/httpd. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. Buffer overread is possible when parsing a specially crafted STUN message with unknown attribute. The vulnerability affects applications that uses STUN including PJNATH and PJSUA-LIB. The patch is available as a commit in the master branch (2.13.1).

The vCenter Server contains a heap-overflow vulnerability in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may trigger this vulnerability by sending a specially crafted network packet potentially leading to remote code execution.

Windows Pragmatic General Multicast (PGM) Remote Code Execution Vulnerability

Windows Remote Desktop Licensing Service Remote Code Execution Vulnerability

An issue was discovered on Samsung mobile devices with M(6.0) software. There is a heap-based buffer overflow in tlc_server. The Samsung IDs are SVE-2016-7220 and SVE-2016-7225 (November 2016).

There is a heap-buffer-overflow at lit-strings.c:431 in lit_read_code_unit_from_utf8 in JerryScript 2.2.0.

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. This issue is similar to GHSA-9pfh-r8x4-w26w. Possible buffer overread when parsing a certain STUN message. The vulnerability affects applications that uses STUN including PJNATH and PJSUA-LIB. The patch is available as commit in the master branch.

TP-Link TL-WPA7510 (EU)_V2_190125 was discovered to contain a stack overflow via the operation parameter at /admin/locale.

A stack-based buffer overflow vulnerability exists in the confsrv set_mf_rule functionality of TCL LinkHub Mesh Wifi MS1G_00_01.00_14. A specially-crafted network packet can lead to stack-based buffer overflow. An attacker can send a malicious packet to trigger this vulnerability.This vulnerability leverages the ethAddr field within the protobuf message to cause a buffer overflow.

Windows TCP/IP Remote Code Execution Vulnerability

Tenda AC15 V15.03.05.19 is vulnerable to Buffer Overflow.