OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, there is a critical vulnerability which can lead to pre-auth remote code execution. AttachmentUploadServlet deserializes untrusted data from the `Attachment-Support` header. This Servlet does not enforce any authentication or authorization checks. This issue may lead to pre-auth remote code execution. This issue was fixed in 4.0.3 by removing AttachmentUploadServlet and not using deserialization

OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, a Kubernetes REST endpoint exposes two methods that deserialize untrusted data from the request body. These endpoints do not enforce any authentication or authorization checks. This issue may lead to pre-auth RCE. This issue was fixed in 4.0.3 by not using deserialization at KubernetesResource side.

OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, There is a vulnerability that enabled pre-auth server side template injection via Bean validation message tampering. Full details in the reference GHSA. This issue was fixed in 4.0.3 by disabling validation interpolation completely.

OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, AttachmentUploadServlet also saves user controlled data (`request.getInputStream()`) to a user specified location (`request.getHeader("File-Name")`). This issue may lead to arbitrary file upload which can be used to upload a WebShell to OneDev server. This issue is addressed in 4.0.3 by only allowing uploaded file to be in attachments folder. The webshell issue is not possible as OneDev never executes files in attachments folder.

ESPv2 is a service proxy that provides API management capabilities using Google Service Infrastructure. ESPv2 2.20.0 through 2.42.0 contains an authentication bypass vulnerability. API clients can craft a malicious `X-HTTP-Method-Override` header value to bypass JWT authentication in specific cases. ESPv2 allows malicious requests to bypass authentication if both the conditions are true: The requested HTTP method is **not** in the API service definition (OpenAPI spec or gRPC `google.api.http` proto annotations, and the specified `X-HTTP-Method-Override` is a valid HTTP method in the API service definition. ESPv2 will forward the request to your backend without checking the JWT. Attackers can craft requests with a malicious `X-HTTP-Method-Override` value that allows them to bypass specifying JWTs. Restricting API access with API keys works as intended and is not affected by this vulnerability. Upgrade deployments to release v2.43.0 or higher to receive a patch. This release ensures that JWT authentication occurs, even when the caller specifies `x-http-method-override`. `x-http-method-override` is still supported by v2.43.0+. API clients can continue sending this header to ESPv2.

Azure Entra ID Elevation of Privilege Vulnerability

An issue was discovered in the ALU unit of the OR1200 (aka OpenRISC 1200) processor 2011-09-10 through 2015-11-11. The overflow flag is not being updated for the msb and mac instructions, which results in an incorrect value in the overflow flag. Any software that relies on this flag may experience corruption in execution.

The RegistrationMagic WordPress plugin made it possible for unauthenticated users to log in as any site user, including administrators, if they knew a valid username on the site due to missing identity validation in the social login function social_login_using_email() of the plugin. This affects versions equal to, and less than, 5.0.1.7.

The Limit Login Attempts plugin before 1.7.1 for WordPress does not clear auth cookies upon a lockout, which might make it easier for remote attackers to conduct brute-force authentication attempts.

A vulnerability was found in Netgear WNR614 1.1.0.28_1.0.1WW. It has been classified as critical. This affects an unknown part of the component URL Handler. The manipulation with the input %00currentsetting.htm leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This issue appears to have been circulating as an 0day since 2024.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

Properly formatted POST requests to multiple resources on the HTTP and HTTPS web servers of the Digi PortServer TS 16 Rack device do not require authentication or authentication tokens. This vulnerability could allow an attacker to enable the SNMP service and manipulate the community strings to achieve further control in.

An Improper Authentication issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3.1 build 150410 to V5.4.4 Build 161125, DS-2CD4x2xFWD Series V5.2.0 build 140721 to V5.4.0 Build 160414, DS-2CD4xx5 Series V5.2.0 build 140721 to V5.4.0 Build 160421, DS-2DFx Series V5.2.0 build 140805 to V5.4.5 Build 160928, and DS-2CD63xx Series V5.0.9 build 140305 to V5.3.5 Build 160106 devices. The improper authentication vulnerability occurs when an application does not adequately or correctly authenticate users. This may allow a malicious user to escalate his or her privileges on the system and gain access to sensitive information.

Geyser is a bridge between Minecraft: Bedrock Edition and Minecraft: Java Edition. Versions of Geyser prior to 1.4.2-SNAPSHOT allow anyone that can connect to the server to forge a LoginPacket with manipulated JWT token allowing impersonation as any user. Version 1.4.2-SNAPSHOT contains a patch for the issue. There are no known workarounds aside from upgrading.

An improper authentication vulnerability has been reported to affect QNAP NAS running Kazoo Server. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Kazoo Server: Kazoo Server 4.11.22 and later

Barco wePresent WiPG-1600W devices allow Authentication Bypass. Affected Version(s): 2.5.1.8. The Barco wePresent WiPG-1600W web interface does not use session cookies for tracking authenticated sessions. Instead, the web interface uses a "SEID" token that is appended to the end of URLs in GET requests. Thus the "SEID" would be exposed in web proxy logs and browser history. An attacker that is able to capture the "SEID" and originate requests from the same IP address (via a NAT device or web proxy) would be able to access the user interface of the device without having to know the credentials.

WP Cerber before 8.9.3 allows MFA bypass via wordpress_logged_in_[hash] manipulation.

Unverified Password Change in GitHub repository tsolucio/corebos prior to 8.

Schneider Electric Modicon Quantum PLC does not perform authentication between the Unity software and PLC, which allows remote attackers to cause a denial of service or possibly execute arbitrary code via unspecified vectors.

An authentication bypass vulnerability exists in the OAS Engine functionality of Open Automation Software OAS Platform v18.00.0072. A specially-crafted series of network requests can lead to arbitrary authentication. An attacker can send a sequence of requests to trigger this vulnerability.

Loxone Miniserver devices with firmware before 11.1 (aka 11.1.9.3) are unable to use an authentication method that is based on the "signature of the update package." Therefore, these devices (or attackers who are spoofing these devices) can continue to use an unauthenticated cloud service for an indeterminate time period (possibly forever). Once an individual device's firmware is updated, and authentication occurs once, the cloud service recategorizes the device so that authentication is subsequently always required, and spoofing cannot occur.

A flaw was found in Apache ShenYu Admin. The incorrect use of JWT in ShenyuAdminBootstrap allows an attacker to bypass authentication. This issue affected Apache ShenYu 2.3.0 and 2.4.0

An authentication bypass by capture-replay issue was discovered in Schneider Electric Modicon Modbus Protocol. Sensitive information is transmitted in cleartext in the Modicon Modbus protocol, which may allow an attacker to replay the following commands: run, stop, upload, and download.

There is an improper authentication vulnerability in Hero-CT060 before 1.0.0.200. The vulnerability is due to that when an user wants to do certain operation, the software does not insufficiently validate the user's identity. Successful exploit could allow the attacker to do certain operations which the user are supposed not to do.

Networking OS10, versions prior to October 2021 with RESTCONF API enabled, contains an authentication bypass vulnerability. A remote unauthenticated attacker could exploit this vulnerability to gain access and perform actions on the affected system.

Couchbase Server 6.5.x and 6.6.x through 6.6.2 has Incorrect Access Control. Externally managed users are not prevented from using an empty password, per RFC4513.

In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed.

TYPO3 before 4.3.12, 4.4.x before 4.4.9, and 4.5.x before 4.5.4 allows remote attackers to bypass authentication mechanisms in the backend through a crafted request.

Adobe Framemaker Publishing Server versions 2020.3, 2022.2 and earlier are affected by an Improper Authentication vulnerability that could result in privilege escalation. An attacker could exploit this vulnerability to gain unauthorized access or elevated privileges within the application. Exploitation of this issue does not require user interaction.

An exploitable vulnerability exists in the generation of authentication token functionality of Circle with Disney. Specially crafted network packets can cause a valid authentication token to be returned to the attacker resulting in authentication bypass. An attacker can send a series of packets to trigger this vulnerability.

Hirschmann Industrial HiVision versions prior to 06.0.07 and 07.0.03 contains an authentication bypass vulnerability in the master service that allows unauthenticated remote attackers to execute arbitrary commands with administrative privileges. Attackers can invoke exposed interface methods over the remote service to bypass authentication and achieve remote code execution on the underlying operating system.

An issue in the administrator authentication panel of PTCL HG150-Ub v3.0 allows attackers to bypass authentication via modification of the cookie value and Response Path.

This vulnerability allows remote attackers to bypass authentication on affected installations of Commvault CommCell 11.22.22. Authentication is not required to exploit this vulnerability. The specific flaw exists within the CVSearchService service. The issue results from the lack of proper validation prior to authentication. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-13706.

An Improper Authentication vulnerability in upload-file.php, used by the J-Web component of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to upload arbitrary files to temporary folders on the device. This issue affects Juniper Networks Junos OS: All versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 version 21.1R1 and later versions; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.

An issue was discovered in Mattermost Server before 4.0.0, 3.10.2, and 3.9.2. A password-reset request was sometime sent to an attacker-provided e-mail address.

A vulnerability, which was classified as critical, was found in Itech Job Portal Script 9.13. This affects an unknown part of the file /admin. The manipulation leads to improper authentication. It is possible to initiate the attack remotely.

ProSoft Technology ICX35-HWC version 1.3 and prior cellular gateways contain an authentication bypass vulnerability in the web user interface that allows unauthenticated attackers to gain access to administrative functions without valid credentials. Attackers can bypass the authentication mechanism in affected firmware versions to obtain full administrative access to device configuration and settings.

A vulnerability in the TACACS+ authentication, authorization and accounting (AAA) feature of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to bypass authentication and log in to an affected device as an administrator. This vulnerability is due to incomplete validation of user-supplied input that is passed to an authentication script. An attacker could exploit this vulnerability by injecting parameters into an authentication request. A successful exploit could allow the attacker to bypass authentication and log in as an administrator to the affected device.

aEnrich a+HRD has improper validation for login function. An unauthenticated remote attacker can exploit this vulnerability to bypass authentication and access API function to perform arbitrary system command or disrupt service.

This vulnerability allows an attacker who has access to the WBM to read and write settings-parameters of the device by sending specifically constructed requests without authentication on multiple WAGO PLCs in firmware versions up to FW07.

The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

Some Dahua products have access control vulnerability in the password reset process. Attackers can exploit this vulnerability through specific deployments to reset device passwords.

Automation Direct CLICK PLC CPU Modules: C0-1x CPUs with firmware prior to v3.00 does not protect against additional software programming connections. An attacker can connect to the PLC while an existing connection is already active.

Delta Electronics DIAEnergie Version 1.7.5 and prior may allow an attacker to add a new administrative user without being authenticated or authorized, which may allow the attacker to log in and use the device with administrative privileges.

An authentication bypass in telnet server in BF-430 and BF431 232/422 TCP/IP Converter, BF-450M and SEMAC from CHIYU Technology Inc allows obtaining a privileged connection with the target device by supplying a specially malformed request and an attacker may force the remote telnet server to believe that the user has already authenticated.

Apollos Apps is an open source platform for launching church-related apps. In Apollos Apps versions prior to 2.20.0, new user registrations are able to access anyone's account by only knowing their basic profile information (name, birthday, gender, etc). This includes all app functionality within the app, as well as any authenticated links to Rock-based webpages (such as giving and events). There is a patch in version 2.20.0. As a workaround, one can patch one's server by overriding the `create` data source method on the `People` class.

In versions 8.2.1 through 8.5.2 of Pega Infinity, the password reset functionality for local accounts can be used to bypass local authentication checks.

In Drobo 5N2 4.0.5, all optional applications lack any form of authentication/authorization validation. As a result, any user capable of accessing the device over the network may interact with and control these applications. This not only poses a severe risk to the availability of these applications, but also poses severe risks to the confidentiality and integrity of data stored within the applications and the device itself.

The usage of an internal HTTP header created an authentication bypass vulnerability (CWE-287), allowing an attacker to view internal files, change settings, manipulate services and execute arbitrary code. This issue affects all Juniper Networks 128 Technology Session Smart Router versions prior to 4.5.11, and all versions of 5.0 up to and including 5.0.1.