D-Link DIR845L v1.00-v1.03 contains a Static Default Credential vulnerability in /etc/init0.d/S80telnetd.sh.

Improper Authentication vulnerability in Repute Infosystems BookingPress allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects BookingPress: from n/a through 1.0.74.

Kaseya Virtual System Administrator (VSA) 7.x before 7.0.0.33, 8.x before 8.0.0.23, 9.0 before 9.0.0.19, and 9.1 before 9.1.0.9 does not properly require authentication, which allows remote attackers to bypass authentication and (1) add an administrative account via crafted request to LocalAuth/setAccount.aspx or (2) write to and execute arbitrary files via a full pathname in the PathData parameter to ConfigTab/uploader.aspx.

An Improper Authentication vulnerability affecting DELMIA Apriso from Release 2020 through Release 2026 could allow an attacker to gain privileged access to the server.

The authentication mechanism can be bypassed by overflowing the value of the Cookie "authentication" field, provided there is an active user session.

There is broken access control during authentication in Jamf Pro Server before 10.46.1.

Improper Authentication vulnerability in Elementor Elementor Website Builder allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Elementor Website Builder: from n/a through 3.16.4.

An exposure of sensitive information vulnerability has been reported to affect Media Streaming add-on. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following version: Media Streaming add-on 500.1.1.5 ( 2024/01/22 ) and later

authentik is an open-source identity provider. When initialising a oauth2 flow with a `code_challenge` and `code_method` (thus requesting PKCE), the single sign-on provider (authentik) must check if there is a matching and existing `code_verifier` during the token step. Prior to versions 2023.10.4 and 2023.8.5, authentik checks if the contents of `code_verifier` is matching only when it is provided. When it is left out completely, authentik simply accepts the token request with out it; even when the flow was started with a `code_challenge`. authentik 2023.8.5 and 2023.10.4 fix this issue.

Improper Authentication vulnerability in WPMU DEV Defender Security allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Defender Security: from n/a through 4.2.0.

A vulnerability, which was classified as critical, was found in holdennb CollabCal. Affected is the function handleGet of the file calenderServer.cpp. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The patch is identified as b80f6d1893607c99e5113967592417d0fe310ce6. It is recommended to apply a patch to fix this issue. VDB-217614 is the identifier assigned to this vulnerability.

IBM DS8900F HMC 89.21.19.0, 89.21.31.0, 89.30.68.0, 89.32.40.0, and 89.33.48.0 could allow a remote attacker to bypass authentication restrictions for authorized user. IBM X-Force ID: 269409.

authentik is an open-source Identity Provider. Prior to versions 2023.8.4 and 2023.10.2, when the default admin user has been deleted, it is potentially possible for an attacker to set the password of the default admin user without any authentication. authentik uses a blueprint to create the default admin user, which can also optionally set the default admin users' password from an environment variable. When the user is deleted, the `initial-setup` flow used to configure authentik after the first installation becomes available again. authentik 2023.8.4 and 2023.10.2 fix this issue. As a workaround, ensure the default admin user (Username `akadmin`) exists and has a password set. It is recommended to use a very strong password for this user, and store it in a secure location like a password manager. It is also possible to deactivate the user to prevent any logins as akadmin.

CloudExplorer Lite is an open source, lightweight cloud management platform. Prior to version 1.4.1, the gateway filter of CloudExplorer Lite uses a controller with path starting with `matching/API/`, which can cause a permission bypass. Version 1.4.1 contains a patch for this issue.

An issue in Student Study Center Desk Management System v1.0 allows attackers to bypass authentication via a crafted GET request to /php-sscdms/admin/login.php.

The Burst Statistics – Privacy-Friendly WordPress Analytics (Google Analytics Alternative) plugin for WordPress is vulnerable to Authentication Bypass in versions 3.4.0 to 3.4.1.1. This is due to incorrect return-value handling in the `is_mainwp_authenticated()` function when validating application passwords from the Authorization header. This makes it possible for unauthenticated attackers, with knowledge of an administrator username, to impersonate that administrator for the duration of the request by supplying any random Basic Authentication password achieving privilege escalation.

IBM Langflow OSS 1.0.0 through 1.8.4 could allow unauthenticated attackers to access protected MCP project resources and execute MCP operations due to improper authorization enforcement in the Streamable MCP transport endpoint.

A vulnerability was detected in OpenClaw up to 2026.1.24. The impacted element is the function handleBlueBubblesWebhookRequest of the file extensions/bluebubbles/src/monitor.ts of the component bluebubbles Webhook. Performing a manipulation results in improper authentication. It is possible to initiate the attack remotely. The exploit is now public and may be used. Upgrading to version 2026.2.12 is sufficient to resolve this issue. The patch is named a6653be0265f1f02b9de46c06f52ea7c81a836e6. The affected component should be upgraded.

An authentication bypass exists in Arcserve UDP prior to version 9.2. An unauthenticated, remote attacker can obtain a valid authentication identifier that allows them to authenticate to the management console and perform tasks that require authentication.

An issue in Kloudq Technologies Limited Tor Equip 1.0, Tor Loco Mini 1.0 through 3.1 allows a remote attacker to execute arbitrary code via a crafted request to the MQTT component.

Improper Authentication, Missing authentication for critical function, Weak Authentication vulnerability in DTS Electronics Industry and Trade Ltd. Co. Redline WR3200 allows Accessing Functionality Not Properly Constrained by ACLs. This issue affects Redline WR3200: from 7.1.3 before 7.1.8.

InfluxDB before 1.7.6 has an authentication bypass vulnerability in the authenticate function in services/httpd/handler.go because a JWT token may have an empty SharedSecret (aka shared secret).

Netwrix Usercube before 6.0.215, in certain misconfigured on-premises installations, allows authentication bypass on deployment endpoints, leading to privilege escalation. This only occurs if the configuration omits the required restSettings.AuthorizedClientId and restSettings.AuthorizedSecret fields (for the POST /api/Deployment/ExportConfiguration and POST /api/Deployment endpoints).

The WLAN module has a vulnerability in permission verification. Successful exploitation of this vulnerability may cause third-party apps to affect WLAN functions.

handleIncomingPacket in conn.go in Pion DTLS before 1.5.2 lacks a check for application data with epoch 0, which allows remote attackers to inject arbitrary unencrypted data after handshake completion.

Improper Authentication vulnerability in Genians Genian NAC V4.0, Genians Genian NAC V5.0, Genians Genian NAC Suite V5.0, Genians Genian ZTNA allows Authentication Abuse.This issue affects Genian NAC V4.0: from V4.0.0 through V4.0.155; Genian NAC V5.0: from V5.0.0 through V5.0.42 (Revision 117460); Genian NAC Suite V5.0: from V5.0.0 through V5.0.54; Genian ZTNA: from V6.0.0 through V6.0.15.

aEnrich a+HRD has improper validation for login function. An unauthenticated remote attacker can exploit this vulnerability to bypass authentication and access API function to perform arbitrary system command or disrupt service.

An improper authentication vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTScloud c5.1.5.2651 and later

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.

CasaOS is an open-source Personal Cloud system. Unauthenticated attackers can craft arbitrary JWTs and access features that usually require authentication and execute arbitrary commands as `root` on CasaOS instances. This problem was addressed by improving the validation of JWTs in commit `705bf1f`. This patch is part of CasaOS 0.4.4. Users should upgrade to CasaOS 0.4.4. If they can't, they should temporarily restrict access to CasaOS to untrusted users, for instance by not exposing it publicly.

The "remember me" functionality in login.php in Burden before 1.8.1 allows remote attackers to bypass authentication and gain privileges by setting the burden_user_rememberme cookie to 1.

libc in OpenBSD 6.6 allows authentication bypass via the -schallenge username, as demonstrated by smtpd, ldapd, or radiusd. This is related to gen/auth_subr.c and gen/authenticate.c in libc (and login/login.c and xenocara/app/xenodm/greeter/verify.c).

The login REST API in ProLion CryptoSpike 3.0.15P2 (when LDAP or Active Directory is used as the users store) allows a remote blocked user to login and obtain an authentication token by specifying a username with different uppercase/lowercase character combination.

Loftware Spectrum before 4.6 HF14 has Missing Authentication for a Critical Function.

On Aspire-derived NEC PBXes, including all versions of SV8100 devices, a set of documented, static login credentials may be used to access the DIM interface.

A vulnerability was determined in Technostrobe HI-LED-WR120-G2 5.5.0.1R6.03.30. The affected element is the function index_config of the file /LoginCB. This manipulation causes improper authentication. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Open Access Management (OpenAM) is an access management solution that includes Authentication, SSO, Authorization, Federation, Entitlements and Web Services Security. OpenAM up to version 14.7.2 does not properly validate the signature of SAML responses received as part of the SAMLv1.x Single Sign-On process. Attackers can use this fact to impersonate any OpenAM user, including the administrator, by sending a specially crafted SAML response to the SAMLPOSTProfileServlet servlet. This problem has been patched in OpenAM 14.7.3-SNAPSHOT and later. User unable to upgrade should comment servlet `SAMLPOSTProfileServlet` from their pom file. See the linked GHSA for details.

The Synergy Systems & Solutions PLC & RTU system has a vulnerability in HUSKY RTU 6049-E70 firmware versions 5.0 and prior. The affected product does not require adequate authentication, which may allow an attacker to read sensitive information or execute arbitrary code. This is a different issue than CVE-2019-16879 and CVE-2019-20045.

An authentication bypass vulnerability in Ivanti EPMM 11.10 and older, allows unauthorized users to access restricted functionality or resources of the application without proper authentication. This vulnerability is unique to CVE-2023-35078 announced earlier.

A vulnerability has been identified in Mendix SAML (Mendix 7 compatible) (All versions >= V1.17.3 < V1.18.0), Mendix SAML (Mendix 7 compatible) (All versions >= V1.16.4 < V1.17.3), Mendix SAML (Mendix 8 compatible) (All versions >= V2.3.0 < V2.4.0), Mendix SAML (Mendix 8 compatible) (All versions >= V2.2.0 < V2.3.0), Mendix SAML (Mendix 9 latest compatible, New Track) (All versions >= V3.3.1 < V3.6.1), Mendix SAML (Mendix 9 latest compatible, New Track) (All versions >= V3.1.9 < V3.3.1), Mendix SAML (Mendix 9 latest compatible, Upgrade Track) (All versions >= V3.3.0 < V3.6.0), Mendix SAML (Mendix 9 latest compatible, Upgrade Track) (All versions >= V3.1.8 < V3.3.0), Mendix SAML (Mendix 9.12/9.18 compatible, New Track) (All versions >= V3.3.1 < V3.3.15), Mendix SAML (Mendix 9.12/9.18 compatible, Upgrade Track) (All versions >= V3.3.0 < V3.3.14), Mendix SAML (Mendix 9.6 compatible, New Track) (All versions >= V3.1.9 < V3.2.7), Mendix SAML (Mendix 9.6 compatible, Upgrade Track) (All versions >= V3.1.8 < V3.2.6). The affected versions of the module insufficiently verify the SAML assertions. This could allow unauthenticated remote attackers to bypass authentication and get access to the application. This CVE entry describes the incomplete fix for CVE-2023-25957 in a specific non default configuration.

An authentication bypass vulnerability in Ivanti EPMM allows unauthorized users to access restricted functionality or resources of the application without proper authentication.

MFScripts YetiShare v3.5.2 through v4.5.4 might allow an attacker to reset a password by using a leaked hash (the hash never expires until used).

Aspire-derived NEC PBXes, including the SV8100, SV9100, SL1100 and SL2100 with software releases 7.0 or higher contain the possibility if incorrectly configured to allow a blank username and password combination to be entered as a valid, successfully authenticating account.

In MIELE XGW 3000 ZigBee Gateway before 2.4.0, the Password Change Function does not require knowledge of the old password. This can be exploited in conjunction with CVE-2019-20480.

UPSMON Pro login function has insufficient authentication. An unauthenticated remote attacker can exploit this vulnerability to bypass authentication and get administrator privilege to access, control system or disrupt service.

Symantec Critical System Protection (CSP), versions 8.0, 8.0 HF1 & 8.0 MP1, may be susceptible to an authentication bypass vulnerability, which is a type of issue that can potentially allow a threat actor to circumvent existing authentication controls.

An Improper Authentication vulnerability in the Schweitzer Engineering Laboratories SEL-451 could allow a remote unauthenticated attacker to potentially perform session hijacking attack and bypass authentication. See product Instruction Manual Appendix A dated 20230830 for more details.

Wekan is open source kanban built with Meteor. Prior to 9.46, header-login with HEADER_LOGIN_TRUSTED_IPS uses getRequestIp() in server/lib/headerLoginAuth.js to trust the client-supplied X-Forwarded-For header before the real socket address, allowing an unauthenticated attacker to send HEADER_LOGIN_ID for any username and receive a meteor_login_token session, including for admin. This issue is fixed in version 9.46.

A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). An attacker with network access to the Application Server could gain remote code execution by sending specifically crafted packets to 8888/tcp. Please note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

Improper authentication in the vault password feature in Devolutions Remote Desktop Manager 2024.1.31.0 and earlier allows an attacker that has compromised an access to an RDM instance to bypass the vault master password via the offline mode feature.