Lepton-CMS 4.7.0 is affected by cross-site scripting (XSS). An attacker can inject the XSS payload in the URL field of the admin page and each time an admin visits the Menu-Pages-Pages Overview section, the XSS will be triggered.

A vulnerability was found in Bdtask Multi-Store Inventory Management System up to 20240320. It has been classified as problematic. Affected is an unknown function of the component Page Title Handler. The manipulation leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-258198 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Cimatti Consulting Contact Forms by Cimatti allows Stored XSS.This issue affects Contact Forms by Cimatti: from n/a through 1.8.0.

The Resource Settings page allows a high privilege attacker to load exploitable payload to be stored and reflected whenever a User visits the page. In a successful attack, some information could be obtained and/or modified. However, the attacker does not have control over what information is obtained, or the amount or kind of loss is limited.

The Save as Image Plugin by Pdfcrowd WordPress plugin before 3.2.2 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup)

Cross Site Scripting (XSS) vulnerability in Metagauss EventPrime.This issue affects EventPrime: from n/a through 3.3.9.

The WP-Eggdrop plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 0.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled.

Multiple vulnerabilities in the web-based management interface of Cisco Packaged Contact Center Enterprise (Packaged CCE) and Cisco Unified Contact Center Enterprise (Unified CCE) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device.  These vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have valid administrative credentials.

The way URIs are handled in admin/header.php in Chadha PHPKB Standard Multi-Language 9 allows Reflected XSS (injecting arbitrary web script or HTML) in admin/add-glossary.php by adding a question mark (?) followed by the payload.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Supsystic Photo Gallery by Supsystic allows Stored XSS.This issue affects Photo Gallery by Supsystic: from n/a through 1.15.16.

The way URIs are handled in admin/header.php in Chadha PHPKB Standard Multi-Language 9 allows Reflected XSS (injecting arbitrary web script or HTML) in admin/email-harvester.php by adding a question mark (?) followed by the payload.

A vulnerability in the web conferencing component of Mitel MiCollab through 9.7.1.110 could allow an authenticated attacker with administrative privileges to conduct a Stored Cross-Site Scripting (XSS) attack due to insufficient validation of user input. A successful exploit could allow an attacker to execute arbitrary scripts.

The Custom Field Suite plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'cfs[fields][*][name]' parameter in all versions up to, and including, 2.6.5 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled.

DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Prior to version 10.1.0, administrators and content editors can set html in module titles that could include javascript which could be used for XSS based attacks. This issue has been patched in version 10.1.0.

The LuckyWP Table of Contents plugin for WordPress is vulnerable to Stored Cross-Site Scripting via multiple parameters in versions up to, and including, 2.1.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers with Contributor permissions and above to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The application allows a high privilege attacker to append a malicious GET query parameter to Service invocations, which are reflected in the server response. Under certain circumstances, if the parameter contains a JavaScript, the script could be processed on client side.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WP Email Newsletter Team - FluentCRM Fluent CRM allows Stored XSS.This issue affects Fluent CRM: from n/a through 2.8.44.

The SVS Pricing Tables plugin for WordPress is vulnerable to Stored Cross-Site Scripting via pricing table settings in all versions up to, and including, 1.0.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled.

There is a reflected cross site scripting vulnerability in Esri Portal for ArcGIS 11.4 and below that may allow a remote authenticated attacker with administrative access to supply a crafted string which would execute arbitrary JavaScript code in the browser.

The Social Share, Social Login and Social Comments Plugin WordPress plugin before 7.13.64 does not sanitise and escape some of its settings, which could allow high privilege users such as editors to perform Cross-Site Scripting attacks even when unfiltered_html is disallowed

OpenCart 3.0.3.6 is affected by cross-site scripting (XSS) in the Profile Image. An admin can upload a profile image as a malicious code using JavaScript. Whenever anyone will see the profile picture, the code will execute and XSS will trigger.

The SolarWinds Platform was determined to be affected by a stored cross-site scripting vulnerability affecting the web console. A high-privileged user and user interaction is required to exploit this vulnerability.

The SolarWinds Platform was determined to be affected by a reflected cross-site scripting vulnerability affecting the web console. A high-privileged user and user interaction is required to exploit this vulnerability.

There is a reflected cross site scripting vulnerability in Esri Portal for ArcGIS 11.4 and below that may allow a remote authenticated attacker with administrative access to supply a crafted string which would execute arbitrary JavaScript code in the browser.

There is a reflected cross site scripting vulnerability in Esri Portal for ArcGIS 11.4 and below that may allow a remote authenticated attacker with administrative access to supply a crafted string which would execute arbitrary JavaScript code in the browser.

osCommerce 2.3.4.1 has XSS vulnerability via the authenticated user entering the XSS payload into the title section of newsletters.

The socialdriver-framework WordPress plugin before 2024.04.30 does not sanitise and escape some of its settings, which could allow high privilege users such as contributor to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup)

A vulnerability in web UI input field of GateManager allows authenticated attacker to enter script tags that could cause XSS. This issue affects: GateManager all versions prior to 9.3.

There is a stored Cross-site Scripting vulnerability in Esri Portal for ArcGIS 11.4 and below that may allow a remote, authenticated attacker to inject malicious a file with an embedded xss script which when loaded could potentially execute arbitrary JavaScript code in the victim’s browser. The privileges required to execute this attack are high. The attack could disclose a privileged token which may result in the attacker gaining full control of the Portal.

Dell PowerProtect DD, versions prior to 8.0, LTS 7.13.1.0, LTS 7.10.1.30, LTS 7.7.5.40 contain a Stored Cross-Site Scripting Vulnerability. A remote high privileged attacker could potentially exploit this vulnerability, leading to the storage of malicious HTML or JavaScript codes in a trusted application data store. When a high privileged victim user accesses the data store through their browsers, the malicious code gets executed by the web browser in the context of the vulnerable web application. Exploitation may lead to information disclosure, session theft, or client-side request forgery

OctoPrint provides a web interface for controlling consumer 3D printers. OctoPrint versions up until and including 1.9.3 contain a vulnerability that allows malicious admins to configure or talk a victim with administrator rights into configuring a webcam snapshot URL which when tested through the "Test" button included in the web interface will execute JavaScript code in the victims browser when attempting to render the snapshot image. An attacker who successfully talked a victim with admin rights into performing a snapshot test with such a crafted URL could use this to retrieve or modify sensitive configuration settings, interrupt prints or otherwise interact with the OctoPrint instance in a malicious way. The vulnerability is patched in version 1.10.0rc3. OctoPrint administrators are strongly advised to thoroughly vet who has admin access to their installation and what settings they modify based on instructions by strangers.

Senayan Library Management System v9.4.2 was discovered to contain a cross-site scripting (XSS) vulnerability via the component pop_chart.php.

Stored XSS in the Crash Report page in Checkmk before versions 2.3.0p7, 2.2.0p28, 2.1.0p45, and 2.0.0 (EOL) allows users with permission to change Global Settings to execute arbitrary scripts by injecting HTML elements into the Crash Report URL in the Global Settings.

Dell OpenManage Enterprise, versions 4.1.0 and older, contains an Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Script injection.

phpMyFAQ is an open source FAQ web application for PHP 8.1+ and MySQL, PostgreSQL and other databases. An attacker with admin privileges can upload an attachment containing JS code without extension and the application will render it as HTML which allows for XSS attacks.

Certain NETGEAR devices are affected by stored XSS. This affects EX7000 before 1.0.1.78, R6250 before 1.0.4.34, R6400 before 1.0.1.46, R6400v2 before 1.0.2.66, R7100LG before 1.0.0.50, R7300DST before 1.0.0.70, R7900 before 1.0.3.8, R8300 before 1.0.2.128, and R8500 before 1.0.2.128.

Peering Manager is a BGP session management tool. Affected versions of Peering Manager are subject to a potential stored Cross-Site Scripting (XSS) attack in the `name` attribute of AS or Platform. The XSS triggers on a routers detail page. Adversaries are able to execute arbitrary JavaScript code with the permission of a victim. XSS attacks are often used to steal credentials or login tokens of other users. This issue has been addressed in version 1.8.3. Users are advised to upgrade. There are no known workarounds for this vulnerability.

An improper neutralization of input during web page generation vulnerability [CWE-79] in FortiSIEM 7.2.0 through 7.2.2, 7.1 all versions, 7.0 all versions, 6.7 all versions, 6.6 all versions, 6.5 all versions, 6.4 all versions, 6.3 all versions, 6.2 all versions may allow an authenticated attacker to perform a stored cross site scripting (XSS) attack via crafted HTTP requests.

Improper Input Validation vulnerability in Hallo Welt! GmbH BlueSpice (Extension:CognitiveProcessDesigner) allows Cross-Site Scripting (XSS).This issue affects BlueSpice: from 5 through 5.1.1.

A cross-site scripting (XSS) vulnerability has been reported to affect Helpdesk. If exploited, the vulnerability could allow authenticated administrators to inject malicious code via a network. We have already fixed the vulnerability in the following version: Helpdesk 3.3.1 and later

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WPFunnels Team WPFunnels allows Stored XSS.This issue affects WPFunnels: from n/a through 3.0.6.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Survey Maker team Survey Maker allows Stored XSS.This issue affects Survey Maker: from n/a through 4.0.5.

A cross-site scripting (XSS) vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2 could allow an attacker to tamper with the web interface of the product in a manner separate from the similar CVE-2020-8462.

Concrete CMS version 9 before 9.2.8 and previous versions prior to 8.5.16 is vulnerable to Stored XSS on the calendar color settings screen since Information input by the user is output without escaping. A rogue administrator could inject malicious javascript into the Calendar Color Settings screen which might be executed when users visit the affected page. The Concrete CMS security team gave this vulnerability a CVSS v3.1 score of 2.0 with a vector of AV:N/AC:H/PR:H/UI:R/S:U/C:L/I:N/A:N&version=3.1 https://nvd.nist.gov/vuln-metrics/cvss/v3-calculator   Thank you Rikuto Tauchi for reporting

Decidim is a participatory democracy framework. The admin panel is subject to potential XSS attach in case the attacker manages to modify some records being uploaded to the server. This vulnerability is fixed in 0.27.6 and 0.28.1.

There is a reflected cross site scripting vulnerability in Esri Portal for ArcGIS 11.4 and below that may allow a remote authenticated attacker with administrative access to supply a crafted string which would execute arbitrary JavaScript code in the browser.

The socialdriver-framework WordPress plugin before 2024.04.30 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup)

GLPI is a Free Asset and IT Management Software package, Data center management, ITIL Service Desk, licenses tracking and software auditing. A user with rights to create and share dashboards can build a dashboard containing javascript code. Any user that will open this dashboard will be subject to an XSS attack. This issue has been patched in version 10.0.13.

Certain NETGEAR devices are affected by stored XSS. This affects EX7000 before 1.0.1.78, R6250 before 1.0.4.34, R6400 before 1.0.1.46, R6400v2 before 1.0.2.66, R6700v3 before 1.0.2.66, R7100LG before 1.0.0.50, R7300DST before 1.0.0.70, R7900 before 1.0.3.8, R8300 before 1.0.2.128, and R8500 before 1.0.2.128.

CMS Made Simple Version 2.2.19 is vulnerable to Cross Site Scripting (XSS). This vulnerability resides in the File Manager module of the admin panel. Specifically, the issue arises due to inadequate sanitization of user input in the "New directory" field.