Improper Authentication vulnerability in S&D smarthome(smartcare) application can cause authentication bypass and information exposure. Remote attackers can use this vulerability to take control of the home environment including indoor control.
The web server in ABB Telephone Gateway TG/S 3.2 and Busch-Jaeger 6186/11 Telefon-Gateway allows access to different endpoints of the application without authenticating by accessing a specific uniform resource locator (URL) , violating the access-control (ACL) rules. This issue allows obtaining sensitive information that may aid in further attacks and privilege escalation.
CWE - CWE-287: Improper Authentication vulnerability in SUSE Linux Enterprise Server 15 SP 3; openSUSE Tumbleweed allows local attackers to execute arbitrary code via salt without the need to specify valid credentials. This issue affects: SUSE Linux Enterprise Server 15 SP 3 salt versions prior to 3002.2-3. openSUSE Tumbleweed salt version 3002.2-2.1 and prior versions. This issue affects: SUSE Linux Enterprise Server 15 SP 3 salt versions prior to 3002.2-3. openSUSE Tumbleweed salt version 3002.2-2.1 and prior versions.
Aspire-derived NEC PBXes, including the SV8100, SV9100, SL1100 and SL2100 with software releases 7.0 or higher contain the possibility if incorrectly configured to allow a blank username and password combination to be entered as a valid, successfully authenticating account.
The SolarWinds Access Rights Manager was found to be susceptible to a Remote Code Execution Vulnerability. If exploited, this vulnerability allows an authenticated user to abuse a SolarWinds service resulting in remote code execution.
MFScripts YetiShare v3.5.2 through v4.5.4 might allow an attacker to reset a password by using a leaked hash (the hash never expires until used).
The Synergy Systems & Solutions PLC & RTU system has a vulnerability in HUSKY RTU 6049-E70 firmware versions 5.0 and prior. The affected product does not require adequate authentication, which may allow an attacker to read sensitive information or execute arbitrary code. This is a different issue than CVE-2019-16879 and CVE-2019-20045.
TYPO3 before 4.3.12, 4.4.x before 4.4.9, and 4.5.x before 4.5.4 allows remote attackers to bypass authentication mechanisms in the backend through a crafted request.
libc in OpenBSD 6.6 allows authentication bypass via the -schallenge username, as demonstrated by smtpd, ldapd, or radiusd. This is related to gen/auth_subr.c and gen/authenticate.c in libc (and login/login.c and xenocara/app/xenodm/greeter/verify.c).
On certain TOTOLINK Realtek SDK based routers, the CAPTCHA text can be retrieved via an {"topicurl":"setting/getSanvas"} POST to the boafrm/formLogin URI, leading to a CAPTCHA bypass. (Also, the CAPTCHA text is not needed once the attacker has determined valid credentials. The attacker can perform router actions via HTTP requests with Basic Authentication.) This affects A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, and N100RE through 3.4.0.
CA Automic Sysload 5.6.0 through 6.1.2 contains a vulnerability, related to a lack of authentication on the File Server port, that potentially allows remote attackers to execute arbitrary commands.
A vulnerability has been identified in Control Center Server (CCS) (All versions < V1.5.0). The Control Center Server (CCS) contains an authentication bypass vulnerability in its XML-based communication protocol as provided by default on ports 5444/tcp and 5440/tcp. A remote attacker with network access to the CCS server could exploit this vulnerability to read the CCS users database, including the passwords of all users in obfuscated cleartext.
A vulnerability was found in Netgear WNR614 1.1.0.28_1.0.1WW. It has been classified as critical. This affects an unknown part of the component URL Handler. The manipulation with the input %00currentsetting.htm leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This issue appears to have been circulating as an 0day since 2024.
A Improper Authentication vulnerability in cryptctl of SUSE Linux Enterprise Server for SAP 12-SP5, SUSE Manager Server 4.0 allows attackers with access to the hashed password to use it without having to crack it. This issue affects: SUSE Linux Enterprise Server for SAP 12-SP5 cryptctl versions prior to 2.4. SUSE Manager Server 4.0 cryptctl versions prior to 2.4.
An issue in StrangeBee TheHive v.5.0.8, v.4.1.21 and Cortex v.3.1.6 allows a remote attacker to gain privileges via Active Directory authentication mechanism.
Symantec Critical System Protection (CSP), versions 8.0, 8.0 HF1 & 8.0 MP1, may be susceptible to an authentication bypass vulnerability, which is a type of issue that can potentially allow a threat actor to circumvent existing authentication controls.
A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). The AdminService is available without authentication on the Application Server. An attacker can use methods exposed via this interface to receive password hashes of other users and to change user passwords. Please note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.
Sangoma FreePBX 115.0.16.26 and below, 14.0.13.11 and below, 13.0.197.13 and below have Incorrect Access Control.
In all versions of ABB Power Generation Information Manager (PGIM) and Plant Connect, the affected product is vulnerable to authentication bypass, which may allow an attacker to remotely bypass authentication and extract credentials from the affected device.
An improper authentication vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later
HCL MyXalytics is affected by broken authentication. It allows attackers to compromise keys, passwords, and session tokens, potentially leading to identity theft and system control. This vulnerability arises from poor configuration, logic errors, or software bugs and can affect any application with access control, including databases, network infrastructure, and web applications.
A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). An attacker with network access to the Application Server could gain remote code execution by sending specifically crafted packets to 8888/tcp. Please note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.
An issue in Ocuco Innovation - INVCLIENT.EXE v2.10.24.5 allows attackers to bypass authentication and escalate privileges to Administrator via a crafted TCP packet.
SharePort Web Access on D-Link DIR-868L REVB through 2.03, DIR-885L REVA through 1.20, and DIR-895L REVA through 1.21 devices allows Authentication Bypass, as demonstrated by a direct request to folder_view.php or category_view.php.
D-Link DIR-601 B1 2.00NA devices are vulnerable to authentication bypass. They do not check for authentication at the server side and rely on client-side validation, which is bypassable. NOTE: this is an end-of-life product.
An improper authentication vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTScloud c5.1.5.2651 and later
Improper authentication of Non-EAPOL/WAPI plaintext frames during four-way handshake can lead to arbitrary network packet injection in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music
A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper handling of Lightweight Directory Access Protocol (LDAP) authentication responses from an external authentication server. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to gain administrative access to the web-based management interface of the affected device.
An issue was discovered in through SaltStack Salt before 3002.5. salt-api does not honor eauth credentials for the wheel_async client. Thus, an attacker can remotely run any wheel modules on the master.
The WP User Frontend WordPress plugin before 3.5.29 uses a user supplied argument called urhidden in its registration form, which contains the role for the account to be created with, encrypted via wpuf_encryption(). This could allow an attacker having access to the AUTH_KEY and AUTH_SALT constant (via an arbitrary file access issue for example, or if the blog is using the default keys) to create an account with any role they want, such as admin
Rubygems.org is the Ruby community's gem hosting service. Rubygems.org users with MFA enabled would normally be protected from account takeover in the case of email account takeover. However, a workaround on the forgotten password form allows an attacker to bypass the MFA requirement and takeover the account. This vulnerability has been patched in commit 0b3272a.
In TOTOLINK EX1200T firmware 4.1.2cu.5215, an attacker can bypass login by sending a specific request through formLoginAuth.htm.
Improper authentication exists in < 12.3.2, < 12.2.6, and < 12.1.12 for GitLab Community Edition (CE) and Enterprise Edition (EE) in the GitLab SAML integration had a validation issue that permitted an attacker to takeover another user's account.
A vulnerability was found in keycloak 7.x, when keycloak is configured with LDAP user federation and StartTLS is used instead of SSL/TLS from the LDAP server (ldaps), in this case user authentication succeeds even if invalid password has entered.
JeeWMS 771e4f5d0c01ffdeae1671be4cf102b73a3fe644 (2025-05-19) contains incorrect authentication bypass vulnerability, which can lead to arbitrary file reading.
Clerk helps developers build user management. Unauthorized access or privilege escalation due to a logic flaw in auth() in the App Router or getAuth() in the Pages Router. This vulnerability was patched in version 4.29.3.
An issue in Konga v0.14.9 allows attackers to bypass authentication via a crafted JWT token.
Azure IPAM (IP Address Management) is a lightweight solution developed on top of the Azure platform designed to help Azure customers manage their IP Address space easily and effectively. By design there is no write access to customers' Azure environments as the Service Principal used is only assigned the Reader role at the root Management Group level. Until recently, the solution lacked the validation of the passed in authentication token which may result in attacker impersonating any privileged user to access data stored within the IPAM instance and subsequently from Azure, causing an elevation of privilege. This vulnerability has been patched in version 3.0.0.
/web/Lib/Action/IndexAction.class.php in D-Link Central WiFi Manager CWM(100) before v1.03R0100_BETA6 allows remote attackers to execute arbitrary PHP code via a cookie because a cookie's username field allows eval injection, and an empty password bypasses authentication.
The dbell Wi-Fi Smart Video Doorbell DB01-S Gen 1 allows remote attackers to launch commands with no authentication verification via TCP port 81, because the loginuse and loginpass parameters to openlock.cgi can have arbitrary values. NOTE: the vendor's position is that this product reached end of life in 2016.
DataEase is an open source business intelligence and data visualization tool. Prior to version 2.10.10, secret verification does not take effect successfully, so a user can use any secret to forge a JWT token. The vulnerability has been fixed in v2.10.10. No known workarounds are available.
A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). An attacker with network access to the Application Server could gain remote code execution by sending specifically crafted objects via RMI. Please note that an attacker needs to have network access to the Application Server in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.
Open Access Management (OpenAM) is an access management solution that includes Authentication, SSO, Authorization, Federation, Entitlements and Web Services Security. OpenAM up to version 14.7.2 does not properly validate the signature of SAML responses received as part of the SAMLv1.x Single Sign-On process. Attackers can use this fact to impersonate any OpenAM user, including the administrator, by sending a specially crafted SAML response to the SAMLPOSTProfileServlet servlet. This problem has been patched in OpenAM 14.7.3-SNAPSHOT and later. User unable to upgrade should comment servlet `SAMLPOSTProfileServlet` from their pom file. See the linked GHSA for details.
Improper authentication is possible in Apache Traffic Control versions 3.0.0 and 3.0.1 if LDAP is enabled for login in the Traffic Ops API component. Given a username for a user that can be authenticated via LDAP, it is possible to improperly authenticate as that user without that user's correct password.
NETGEAR ProSAFE Network Management System MyHandlerInterceptor Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of NETGEAR ProSAFE Network Management System. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MyHandlerInterceptor class. The issue results from improper implementation of the authentication mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19718.
IRC5 exposes an ftp server (port 21). Upon attempting to gain access you are challenged with a request of username and password, however you can input whatever you like. As long as the field isn't empty it will be accepted.
Anviz access control devices allow unverified password change which allows remote attackers to change the administrator password without prior authentication.
On Grandstream GXV3611IR_HD before 1.0.3.23 devices, the root account lacks a password.
A vulnerability of remote credential disclosure was discovered in Advan VD-1 firmware versions up to 230. An attacker can export system configuration which is not encrypted to get the administrator’s account and password in plain text via cgibin/ExportSettings.cgi?Export=1 without any authentication.
An issue in D-Link DI-8100 16.07.26A1 allows a remote attacker to bypass administrator login authentication