An attacker can abuse the batch-requests plugin to send requests to bypass the IP restriction of Admin API. A default configuration of Apache APISIX (with default API key) is vulnerable to remote code execution. When the admin key was changed or the port of Admin API was changed to a port different from the data panel, the impact is lower. But there is still a risk to bypass the IP restriction of Apache APISIX's data panel. There is a check in the batch-requests plugin which overrides the client IP with its real remote IP. But due to a bug in the code, this check can be bypassed.

Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability during JSP compilation in Apache Tomcat permits an RCE on case insensitive file systems when the default servlet is enabled for write (non-default configuration). This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.0.97. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue.

Apache CXF 2.0.x before 2.0.13, 2.1.x before 2.1.10, and 2.2.x before 2.2.9, as used in Apache ServiceMix, Apache Camel, Apache Chemistry, Apache jUDDI, Apache Geronimo, and other products, does not properly reject DTDs in SOAP messages, which allows remote attackers to read arbitrary files, send HTTP requests to intranet servers, or cause a denial of service (CPU and memory consumption) via a crafted DTD, as demonstrated by an entity declaration in a request to samples/wsdl_first_pure_xml, a similar issue to CVE-2010-1632.

The authentication method in Apache Doris versions before 2.0.0 was vulnerable to timing attacks. Users are recommended to upgrade to version 2.0.0 + or 1.2.8, which fixes this issue.

By design, the JDBCAppender in Log4j 1.2.x accepts an SQL statement as a configuration parameter where the values to be inserted are converters from PatternLayout. The message converter, %m, is likely to always be included. This allows attackers to manipulate the SQL by entering crafted strings into input fields or headers of an application that are logged allowing unintended SQL queries to be executed. Note this issue only affects Log4j 1.x when specifically configured to use the JDBCAppender, which is not the default. Beginning in version 2.0-beta8, the JDBCAppender was re-introduced with proper support for parameterized SQL queries and further customization over the columns written to in logs. Apache Log4j 1.2 reached end of life in August 2015. Users should upgrade to Log4j 2 as it addresses numerous other issues from the previous versions.

Apache HTTP Server 2.4.52 and earlier fails to close inbound connection when errors are encountered discarding the request body, exposing the server to HTTP Request Smuggling

** UNSUPPORTED WHEN ASSIGNED ** When integrating Apache Axis 1.x in an application, it may not have been obvious that looking up a service through "ServiceFactory.getService" allows potentially dangerous lookup mechanisms such as LDAP. When passing untrusted input to this API method, this could expose the application to DoS, SSRF and even attacks leading to RCE. As Axis 1 has been EOL we recommend you migrate to a different SOAP engine, such as Apache Axis 2/Java. As a workaround, you may review your code to verify no untrusted or unsanitized input is passed to "ServiceFactory.getService", or by applying the patch from https://github.com/apache/axis-axis1-java/commit/7e66753427466590d6def0125e448d2791723210 . The Apache Axis project does not expect to create an Axis 1.x release fixing this problem, though contributors that would like to work towards this are welcome.

An attacker can use SnakeYAML to deserialize java.net.URLClassLoader and make it load a JAR from a specified URL, and then deserialize javax.script.ScriptEngineManager to load code using that ClassLoader. This unbounded deserialization can likely lead to remote code execution. The code can be run in Helix REST start and Workflow creation. Affect all the versions lower and include 1.2.0. Affected products: helix-core, helix-rest Mitigation: Short term, stop using any YAML based configuration and workflow creation.                   Long term, all Helix version bumping up to 1.3.0 

Java object deserialization issue in Jackrabbit webapp/standalone on all platforms allows attacker to remotely execute code via RMIVersions up to (including) 2.20.10 (stable branch) and 2.21.17 (unstable branch) use the component "commons-beanutils", which contains a class that can be used for remote code execution over RMI. Users are advised to immediately update to versions 2.20.11 or 2.21.18. Note that earlier stable branches (1.0.x .. 2.18.x) have been EOLd already and do not receive updates anymore. In general, RMI support can expose vulnerabilities by the mere presence of an exploitable class on the classpath. Even if Jackrabbit itself does not contain any code known to be exploitable anymore, adding other components to your server can expose the same type of problem. We therefore recommend to disable RMI access altogether (see further below), and will discuss deprecating RMI support in future Jackrabbit releases. How to check whether RMI support is enabledRMI support can be over an RMI-specific TCP port, and over an HTTP binding. Both are by default enabled in Jackrabbit webapp/standalone. The native RMI protocol by default uses port 1099. To check whether it is enabled, tools like "netstat" can be used to check. RMI-over-HTTP in Jackrabbit by default uses the path "/rmi". So when running standalone on port 8080, check whether an HTTP GET request on localhost:8080/rmi returns 404 (not enabled) or 200 (enabled). Note that the HTTP path may be different when the webapp is deployed in a container as non-root context, in which case the prefix is under the user's control. Turning off RMIFind web.xml (either in JAR/WAR file or in unpacked web application folder), and remove the declaration and the mapping definition for the RemoteBindingServlet:         <servlet>             <servlet-name>RMI</servlet-name>             <servlet-class>org.apache.jackrabbit.servlet.remote.RemoteBindingServlet</servlet-class>         </servlet>         <servlet-mapping>             <servlet-name>RMI</servlet-name>             <url-pattern>/rmi</url-pattern>         </servlet-mapping> Find the bootstrap.properties file (in $REPOSITORY_HOME), and set         rmi.enabled=false     and also remove         rmi.host         rmi.port         rmi.url-pattern  If there is no file named bootstrap.properties in $REPOSITORY_HOME, it is located somewhere in the classpath. In this case, place a copy in $REPOSITORY_HOME and modify it as explained.

Apache Software Foundation Apache Submarine has an SQL injection vulnerability when a user logs in. This issue can result in unauthorized login. Now we have fixed this issue and now user must have the correct login to access workbench. This issue affects Apache Submarine: from 0.7.0 before 0.8.0. We recommend that all submarine users with 0.7.0 upgrade to 0.8.0, which not only fixes the issue, supports the oidc authentication mode, but also removes the case of unauthenticated logins. If using the version lower than 0.8.0 and not want to upgrade, you can try cherry-pick PR https://github.com/apache/submarine/pull/1037 https://github.com/apache/submarine/pull/1054 and rebuild the submarine-server image to fix this.

Apache Commons Text performs variable interpolation, allowing properties to be dynamically evaluated and expanded. The standard format for interpolation is "${prefix:name}", where "prefix" is used to locate an instance of org.apache.commons.text.lookup.StringLookup that performs the interpolation. Starting with version 1.5 and continuing through 1.9, the set of default Lookup instances included interpolators that could result in arbitrary code execution or contact with remote servers. These lookups are: - "script" - execute expressions using the JVM script execution engine (javax.script) - "dns" - resolve dns records - "url" - load values from urls, including from remote servers Applications using the interpolation defaults in the affected versions may be vulnerable to remote code execution or unintentional contact with remote servers if untrusted configuration values are used. Users are recommended to upgrade to Apache Commons Text 1.10.0, which disables the problematic interpolators by default.

The RocketMQ NameServer component still has a remote command execution vulnerability as the CVE-2023-33246 issue was not completely fixed in version 5.1.1. When NameServer address are leaked on the extranet and lack permission verification, an attacker can exploit this vulnerability by using the update configuration function on the NameServer component to execute commands as the system users that RocketMQ is running as. It is recommended for users to upgrade their NameServer version to 5.1.2 or above for RocketMQ 5.x or 4.9.7 or above for RocketMQ 4.x to prevent these attacks.

Apache Shiro, before 1.12.0 or 2.0.0-alpha-3, may be susceptible to a path traversal attack that results in an authentication bypass when used together with APIs or other web frameworks that route requests based on non-normalized requests. Mitigation: Update to Apache Shiro 1.12.0+ or 2.0.0-alpha-3+

Improper Authentication vulnerability in Apache Software Foundation Apache Accumulo. This issue affects Apache Accumulo: 2.1.0. Accumulo 2.1.0 contains a defect in the user authentication process that may succeed when invalid credentials are provided. Users are advised to upgrade to 2.1.1.

Hardcoded credentials in the Basic Authentication setup tool (bin/solr auth enable) in Apache Solr versions 9.4.0 through 9.10.1 and 10.0.0 allows a remote attacker to gain full administrative access to the cluster via publicly known default credentials installed silently alongside the user-specified account. As an immediate workaround without upgrading, delete the template users (superadmin, admin, search, index) from security.json or change their passwords. The future, not yet released, versions 9.11.0 and 10.1.0 will not be vulnerable, and it will be enough to upgrade to solve the issue. Not affected: * Clusters where bin/solr auth enable was not used to bootstrap BasicAuth * Clusters where template users have been assigned strong passwords after bootstrap

Improper Neutralization of Special Elements Used in an SQL Command ('SQL Injection') vulnerability in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.4.0 through 1.7.0.  In the toAuditCkSql method, the groupId, streamId, auditId, and dt are directly concatenated into the SQL query statement, which may lead to SQL injection attacks. Users are advised to upgrade to Apache InLong's 1.8.0 or cherry-pick [1] to solve it. [1] https://github.com/apache/inlong/pull/8198

Improper Input Validation vulnerability in Apache Software Foundation Apache Airflow Hive Provider. This issue affects Apache Airflow Apache Hive Provider: before 6.1.1. Before version 6.1.1 it was possible to bypass the security check to RCE via principal parameter. For this to be exploited it requires access to modifying the connection details. It is recommended updating provider version to 6.1.1 in order to avoid this vulnerability.

Critical XXE in Apache Tika (tika-parser-pdf-module) in Apache Tika 1.13 through and including 3.2.1 on all platforms allows an attacker to carry out XML External Entity injection via a crafted XFA file inside of a PDF. An attacker may be able to read sensitive data or trigger malicious requests to internal resources or third-party servers. Note that the tika-parser-pdf-module is used as a dependency in several Tika packages including at least: tika-parsers-standard-modules, tika-parsers-standard-package, tika-app, tika-grpc and tika-server-standard. Users are recommended to upgrade to version 3.2.2, which fixes this issue.

Improper Control of Generation of Code ('Code Injection') vulnerability leading to a possible RCE in Apache OFBiz scrum plugin. This issue affects Apache OFBiz: before 24.09.02 only when the scrum plugin is used. Even unauthenticated attackers can exploit this vulnerability. Users are recommended to upgrade to version 24.09.02, which fixes the issue.

Apache on MacOS X Client 10.0.3 with the HFS+ file system allows remote attackers to bypass access restrictions via a URL that contains some characters whose case is not matched by Apache's filters.

In Apache StreamPark versions 2.0.0 through 2.1.7, a security vulnerability involving a hard-coded encryption key exists. This vulnerability occurs because the system uses a fixed, immutable key for encryption instead of dynamically generating or securely configuring the key. Attackers may obtain this key through reverse engineering or code analysis, potentially decrypting sensitive data or forging encrypted information, leading to information disclosure or unauthorized system access. This issue affects Apache StreamPark: from 2.0.0 before 2.1.7. Users are recommended to upgrade to version 2.1.7, which fixes the issue.

For RocketMQ versions 5.1.0 and below, under certain conditions, there is a risk of remote command execution.  Several components of RocketMQ, including NameServer, Broker, and Controller, are leaked on the extranet and lack permission verification, an attacker can exploit this vulnerability by using the update configuration function to execute commands as the system users that RocketMQ is running as. Additionally, an attacker can achieve the same effect by forging the RocketMQ protocol content.  To prevent these attacks, users are recommended to upgrade to version 5.1.1 or above for using RocketMQ 5.x or 4.9.6 or above for using RocketMQ 4.x .

A Deserialization of Untrusted Data vulnerability exists in the Apache ActiveMQ NMS AMQP Client. This issue affects all versions of Apache ActiveMQ NMS AMQP up to and including 2.3.0, when establishing connections to untrusted AMQP servers. Malicious servers could exploit unbounded deserialization logic present in the client to craft responses that may lead to arbitrary code execution on the client side. Although version 2.1.0 introduced a mechanism to restrict deserialization via allow/deny lists, the protection was found to be bypassable under certain conditions. In line with Microsoft’s deprecation of binary serialization in .NET 9, the project is evaluating the removal of .NET binary serialization support from the NMS API entirely in future releases. Mitigation and Recommendations: Users are strongly encouraged to upgrade to version 2.4.0 or later, which resolves the issue. Additionally, projects depending on NMS-AMQP should migrate away from .NET binary serialization as part of a long-term hardening strategy.

Deserialization of Untrusted Data vulnerability in Apache Seata (incubating). This issue affects Apache Seata (incubating): 2.4.0. Users are recommended to upgrade to version 2.5.0, which fixes the issue.

The Struts 1 plugin in Apache Struts 2.1.x and 2.3.x might allow remote code execution via a malicious field value passed in a raw message to the ActionMessage.

Security vulnerability in Apache bRPC <1.5.0 on all platforms allows attackers to execute arbitrary code via ServerOptions::pid_file. An attacker that can influence the ServerOptions pid_file parameter with which the bRPC server is started can execute arbitrary code with the permissions of the bRPC process. Solution: 1. upgrade to bRPC >= 1.5.0, download link:  https://dist.apache.org/repos/dist/release/brpc/1.5.0/ https://dist.apache.org/repos/dist/release/brpc/1.5.0/ 2. If you are using an old version of bRPC and hard to upgrade, you can apply this patch:  https://github.com/apache/brpc/pull/2218 https://github.com/apache/brpc/pull/2218

Incorrect Authorization vulnerability in Apache Software Foundation Apache IoTDB.This issue affects the iotdb-web-workbench component on 0.13.3. iotdb-web-workbench is an optional component of IoTDB, providing a web console of the database. This problem is fixed from version 0.13.4 of iotdb-web-workbench onwards.

Weak Password Requirements vulnerability in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.1.0 through 1.6.0.  When users change their password to a simple password (with any character or symbol), attackers can easily guess the user's password and access the account. Users are advised to upgrade to Apache InLong's 1.7.0 or cherry-pick https://github.com/apache/inlong/pull/7805 https://github.com/apache/inlong/pull/7805 to solve it.

Improper Privilege Management Vulnerabilities in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.2.0 through 1.6.0.  When the attacker has access to a valid (but unprivileged) account, the exploit can be executed using Burp Suite by sending a login request and following it with a subsequent HTTP request using the returned cookie. Users are advised to upgrade to Apache InLong's 1.7.0 or cherry-pick https://github.com/apache/inlong/pull/7836 https://github.com/apache/inlong/pull/7836 to solve it.

Apache Shiro before 1.7.0, when using Apache Shiro with Spring, a specially crafted HTTP request may cause an authentication bypass.

In Apache Linkis <=1.3.1, because the parameters are not effectively filtered, the attacker uses the MySQL data source and malicious parameters to configure a new data source to trigger a deserialization vulnerability, eventually leading to remote code execution. Versions of Apache Linkis <= 1.3.0 will be affected. We recommend users upgrade the version of Linkis to version 1.3.2.

A deserialization vulnerability existed when decode a malicious package.This issue affects Apache Dubbo: from 3.1.0 through 3.1.10, from 3.2.0 through 3.2.4. Users are recommended to upgrade to the latest version, which fixes the issue.

In Apache Linkis <=1.3.1, due to the lack of effective filtering of parameters, an attacker configuring malicious Mysql JDBC parameters in JDBC EengineConn Module will trigger a deserialization vulnerability and eventually lead to remote code execution. Therefore, the parameters in the Mysql JDBC URL should be blacklisted. Versions of Apache Linkis <= 1.3.0 will be affected. We recommend users upgrade the version of Linkis to version 1.3.2.

Groovy Code Injection & SpEL Injection which lead to Remote Code Execution. This issue affected Apache ShenYu 2.4.0 and 2.4.1.

Apache kylin checks the legitimacy of the project before executing some commands with the project name passed in by the user. There is a mismatch between what is being checked and what is being used as the shell command argument in DiagnosisService. This may cause an illegal project name to pass the check and perform the following steps, resulting in a command injection vulnerability. This issue affects Apache Kylin 4.0.0.

Failure to Sanitize Special Elements into a Different Plane (Special Element Injection) vulnerability in Apache Airflow Providers Snowflake. This issue affects Apache Airflow Providers Snowflake: before 6.4.0. Sanitation of table and stage parameters were added in CopyFromExternalStageToSnowflakeOperator to prevent SQL injection Users are recommended to upgrade to version 6.4.0, which fixes the issue.

A carefully crafted request body can cause a buffer overflow in the mod_lua multipart parser (r:parsebody() called from Lua scripts). The Apache httpd team is not aware of an exploit for the vulnerabilty though it might be possible to craft one. This issue affects Apache HTTP Server 2.4.51 and earlier.

Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Software Foundation Apache Airflow Hive Provider.This issue affects Apache Airflow Hive Provider: before 6.0.0.

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Apache Kylin. A backend API refreshing table catalog may cause the injection to the generated SQL. This issue affects Apache Kylin: from 4 through 5.0.3. Users are recommended to upgrade to version 5.0.4, which fixes the issue.

Vendor: The Apache Software Foundation Versions Affected: Apache OpenMeetings from 2.0.0 before 7.0.0 Description: Attacker can elevate their privileges in any room

If untrusted users are allowed to configure JMS for Apache CXF, previously they could use RMI or LDAP URLs, potentially leading to code execution capabilities. This interface is now restricted to reject those protocols, removing this possibility. Users are recommended to upgrade to versions 3.6.8, 4.0.9 or 4.1.3, which fix this issue.

Improper Privilege Management vulnerability in Apache Syncope. When: * the all-Java user workflow adapter is configured, or * the Flowable user workflow adapter is configured, bearing a BPMN definition not requiring admin approval for user self registration of self update requests the following scenario could happen. A REST API call can allow the user to grant themselves one or more of defined Roles, thus gaining their Entitlements and becoming in fact an administrator; the actual Entitlements gained depend on the Roles that are effectively defined on the specific Syncope deployment. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.6, from 4.1.0-M0 through 4.1.1. Users are recommended to upgrade to version 4.0.7 / 4.1.2, which fix this issue.

Direct Request ('Forced Browsing') vulnerability in Apache OFBiz. This issue affects Apache OFBiz: before 18.12.16. Users are recommended to upgrade to version 18.12.16, which fixes the issue.

Improper Authentication vulnerability in Apache Solr. Solr instances using the PKIAuthenticationPlugin, which is enabled by default when Solr Authentication is used, are vulnerable to Authentication bypass. A fake ending at the end of any Solr API URL path, will allow requests to skip Authentication while maintaining the API contract with the original URL Path. This fake ending looks like an unprotected API path, however it is stripped off internally after authentication but before API routing. This issue affects Apache Solr: from 5.3.0 before 8.11.4, from 9.0.0 before 9.7.0. Users are recommended to upgrade to version 9.7.0, or 8.11.4, which fix the issue.

Kylin concatenates and executes a Hive SQL in Hive CLI or beeline when building a new segment; some part of the HQL is from system configurations, while the configuration can be overwritten by certain rest api, which makes SQL injection attack is possible. Users of all previous versions after 2.0 should upgrade to 3.1.0.

A deserialization vulnerability existed in dubbo hessian-lite 3.2.11 and its earlier versions, which could lead to malicious code execution. Most Dubbo users use Hessian2 as the default serialization/deserialization protocol, during Hessian catch unexpected exceptions, Hessian will log out some imformation for users, which may cause remote command execution. This issue affects Apache Dubbo Apache Dubbo 2.6.x versions prior to 2.6.12; Apache Dubbo 2.7.x versions prior to 2.7.15; Apache Dubbo 3.0.x versions prior to 3.0.5.

A SSRF vulnerability in parsing the href attribute of XOP:Include in MTOM requests in versions of Apache CXF before 3.5.5 and 3.4.10 allows an attacker to perform SSRF style attacks on webservices that take at least one parameter of any type. 

Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability was discovered in Apache NuttX RTOS apps/exapmles/xmlrpc application. In this example application device stats structure that stored remotely provided parameters had hardcoded buffer size which could lead to buffer overflow. Structure members buffers were updated to valid size of CONFIG_XMLRPC_STRINGSIZE+1. This issue affects Apache NuttX RTOS users that may have used or base their code on example application as presented in releases from 6.22 before 12.9.0. Users of XMLRPC in Apache NuttX RTOS are advised to review their code for this pattern and update buffer sizes as presented in the version of the example in release 12.9.0.

Improper Input Validation vulnerability in Apache Camel AWS SNS component. The camel-aws2-sns component filters Camel headers through a component-specific HeaderFilterStrategy, Sns2HeaderFilterStrategy. Like the sibling Sqs2HeaderFilterStrategy, it originally configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers from being written out) and did not configure an inbound filter rule. For the related camel-aws2-sqs component this inbound gap was exploitable, because the Sqs2Consumer maps inbound SQS message attributes into the Camel Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, allowing a message sender to inject Camel control headers (tracked as CVE-2026-46456). camel-aws2-sns, by contrast, is producer-only: Sns2Endpoint does not support consumers (createConsumer throws UnsupportedOperationException, 'You cannot receive messages from this endpoint'), so no externally-supplied message attributes are ever mapped inbound into a Camel Exchange through SNS, and the missing inbound filter rule on Sns2HeaderFilterStrategy was therefore not reachable by an attacker. As part of the same fix (CAMEL-23506), an inbound filter rule (setInFilterStartsWith for the Camel namespace) was added to Sns2HeaderFilterStrategy so that its configuration matches the corrected Sqs2HeaderFilterStrategy and the other sibling strategies. This is a defense-in-depth alignment with no known exploit path in camel-aws2-sns. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. This is a defense-in-depth hardening change with no known exploit path in camel-aws2-sns, which is producer-only, so no urgent action or workaround is required. Users who want the aligned behaviour can upgrade to version 4.21.0, or to 4.14.8 on the 4.14.x LTS releases stream, or to 4.18.3 on the 4.18.x releases stream, which contain the change. As a general best practice, operators should continue to apply least-privilege IAM permissions on their SNS topics.

Improper Neutralization of Escape, Meta, or Control Sequences vulnerability in Apache Tomcat. For a subset of unlikely rewrite rule configurations, it was possible for a specially crafted request to bypass some rewrite rules. If those rewrite rules effectively enforced security constraints, those constraints could be bypassed. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.5, from 10.1.0-M1 through 10.1.39, from 9.0.0.M1 through 9.0.102. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version [FIXED_VERSION], which fixes the issue.