In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix crypto_free_acomp() deadlock in zswap_cpu_comp_dead() Currently, zswap_cpu_comp_dead() calls crypto_free_acomp() while holding the per-CPU acomp_ctx mutex. crypto_free_acomp() then holds scomp_lock (through crypto_exit_scomp_ops_async()). On the other hand, crypto_alloc_acomp_node() holds the scomp_lock (through crypto_scomp_init_tfm()), and then allocates memory. If the allocation results in reclaim, we may attempt to hold the per-CPU acomp_ctx mutex. The above dependencies can cause an ABBA deadlock. For example in the following scenario: (1) Task A running on CPU #1: crypto_alloc_acomp_node() Holds scomp_lock Enters reclaim Reads per_cpu_ptr(pool->acomp_ctx, 1) (2) Task A is descheduled (3) CPU #1 goes offline zswap_cpu_comp_dead(CPU #1) Holds per_cpu_ptr(pool->acomp_ctx, 1)) Calls crypto_free_acomp() Waits for scomp_lock (4) Task A running on CPU #2: Waits for per_cpu_ptr(pool->acomp_ctx, 1) // Read on CPU #1 DEADLOCK Since there is no requirement to call crypto_free_acomp() with the per-CPU acomp_ctx mutex held in zswap_cpu_comp_dead(), move it after the mutex is unlocked. Also move the acomp_request_free() and kfree() calls for consistency and to avoid any potential sublte locking dependencies in the future. With this, only setting acomp_ctx fields to NULL occurs with the mutex held. This is similar to how zswap_cpu_comp_prepare() only initializes acomp_ctx fields with the mutex held, after performing all allocations before holding the mutex. Opportunistically, move the NULL check on acomp_ctx so that it takes place before the mutex dereference.

In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix memory leak in firmware upload In the case of firmware-upload, an instance of struct fw_upload is allocated in firmware_upload_register(). This data needs to be freed in fw_dev_release(). Create a new fw_upload_free() function in sysfs_upload.c to handle the firmware-upload specific memory frees and incorporate the missing kfree call for the fw_upload structure.

In the Linux kernel, the following vulnerability has been resolved: net: sched: cake: fix null pointer access issue when cake_init() fails When the default qdisc is cake, if the qdisc of dev_queue fails to be inited during mqprio_init(), cake_reset() is invoked to clear resources. In this case, the tins is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() cake_init() q->tins = kvcalloc(...) --->failed, q->tins is NULL ... qdisc_put() ... cake_reset() ... cake_dequeue_one() b = &q->tins[...] --->q->tins is NULL The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:cake_dequeue_one+0xc9/0x3c0 Call Trace: <TASK> cake_reset+0xb1/0x140 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f89e5122d04 </TASK>

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is used.

In the Linux kernel, the following vulnerability has been resolved: misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram() `struct vmci_event_qp` allocated by qp_notify_peer() contains padding, which may carry uninitialized data to the userspace, as observed by KMSAN: BUG: KMSAN: kernel-infoleak in instrument_copy_to_user ./include/linux/instrumented.h:121 instrument_copy_to_user ./include/linux/instrumented.h:121 _copy_to_user+0x5f/0xb0 lib/usercopy.c:33 copy_to_user ./include/linux/uaccess.h:169 vmci_host_do_receive_datagram drivers/misc/vmw_vmci/vmci_host.c:431 vmci_host_unlocked_ioctl+0x33d/0x43d0 drivers/misc/vmw_vmci/vmci_host.c:925 vfs_ioctl fs/ioctl.c:51 ... Uninit was stored to memory at: kmemdup+0x74/0xb0 mm/util.c:131 dg_dispatch_as_host drivers/misc/vmw_vmci/vmci_datagram.c:271 vmci_datagram_dispatch+0x4f8/0xfc0 drivers/misc/vmw_vmci/vmci_datagram.c:339 qp_notify_peer+0x19a/0x290 drivers/misc/vmw_vmci/vmci_queue_pair.c:1479 qp_broker_attach drivers/misc/vmw_vmci/vmci_queue_pair.c:1662 qp_broker_alloc+0x2977/0x2f30 drivers/misc/vmw_vmci/vmci_queue_pair.c:1750 vmci_qp_broker_alloc+0x96/0xd0 drivers/misc/vmw_vmci/vmci_queue_pair.c:1940 vmci_host_do_alloc_queuepair drivers/misc/vmw_vmci/vmci_host.c:488 vmci_host_unlocked_ioctl+0x24fd/0x43d0 drivers/misc/vmw_vmci/vmci_host.c:927 ... Local variable ev created at: qp_notify_peer+0x54/0x290 drivers/misc/vmw_vmci/vmci_queue_pair.c:1456 qp_broker_attach drivers/misc/vmw_vmci/vmci_queue_pair.c:1662 qp_broker_alloc+0x2977/0x2f30 drivers/misc/vmw_vmci/vmci_queue_pair.c:1750 Bytes 28-31 of 48 are uninitialized Memory access of size 48 starts at ffff888035155e00 Data copied to user address 0000000020000100 Use memset() to prevent the infoleaks. Also speculatively fix qp_notify_peer_local(), which may suffer from the same problem.

In the Linux kernel, the following vulnerability has been resolved: bpf: make sure skb->len != 0 when redirecting to a tunneling device syzkaller managed to trigger another case where skb->len == 0 when we enter __dev_queue_xmit: WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 skb_assert_len include/linux/skbuff.h:2576 [inline] WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 __dev_queue_xmit+0x2069/0x35e0 net/core/dev.c:4295 Call Trace: dev_queue_xmit+0x17/0x20 net/core/dev.c:4406 __bpf_tx_skb net/core/filter.c:2115 [inline] __bpf_redirect_no_mac net/core/filter.c:2140 [inline] __bpf_redirect+0x5fb/0xda0 net/core/filter.c:2163 ____bpf_clone_redirect net/core/filter.c:2447 [inline] bpf_clone_redirect+0x247/0x390 net/core/filter.c:2419 bpf_prog_48159a89cb4a9a16+0x59/0x5e bpf_dispatcher_nop_func include/linux/bpf.h:897 [inline] __bpf_prog_run include/linux/filter.h:596 [inline] bpf_prog_run include/linux/filter.h:603 [inline] bpf_test_run+0x46c/0x890 net/bpf/test_run.c:402 bpf_prog_test_run_skb+0xbdc/0x14c0 net/bpf/test_run.c:1170 bpf_prog_test_run+0x345/0x3c0 kernel/bpf/syscall.c:3648 __sys_bpf+0x43a/0x6c0 kernel/bpf/syscall.c:5005 __do_sys_bpf kernel/bpf/syscall.c:5091 [inline] __se_sys_bpf kernel/bpf/syscall.c:5089 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5089 do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x61/0xc6 The reproducer doesn't really reproduce outside of syzkaller environment, so I'm taking a guess here. It looks like we do generate correct ETH_HLEN-sized packet, but we redirect the packet to the tunneling device. Before we do so, we __skb_pull l2 header and arrive again at skb->len == 0. Doesn't seem like we can do anything better than having an explicit check after __skb_pull?

In the Linux kernel 4.4 through 5.7.6, usbtest_disconnect in drivers/usb/misc/usbtest.c has a memory leak, aka CID-28ebeb8db770.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix the svc_deferred_event trace class Fix a NULL deref crash that occurs when an svc_rqst is deferred while the sunrpc tracing subsystem is enabled. svc_revisit() sets dr->xprt to NULL, so it can't be relied upon in the tracepoint to provide the remote's address. Unfortunately we can't revert the "svc_deferred_class" hunk in commit ece200ddd54b ("sunrpc: Save remote presentation address in svc_xprt for trace events") because there is now a specific check of event format specifiers for unsafe dereferences. The warning that check emits is: event svc_defer_recv has unsafe dereference of argument 1 A "%pISpc" format specifier with a "struct sockaddr *" is indeed flagged by this check. Instead, take the brute-force approach used by the svcrdma_qp_error tracepoint. Convert the dr::addr field into a presentation address in the TP_fast_assign() arm of the trace event, and store that as a string. This fix can be backported to -stable kernels. In the meantime, commit c6ced22997ad ("tracing: Update print fmt check to handle new __get_sockaddr() macro") is now in v5.18, so this wonky fix can be replaced with __sockaddr() and friends properly during the v5.19 merge window.

In the Linux kernel, the following vulnerability has been resolved: hwmon: Handle failure to register sensor with thermal zone correctly If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device.

In the Linux kernel, the following vulnerability has been resolved: ath10k: Fix error handling in ath10k_setup_msa_resources The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error path.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix free of uninitialized nfs4_label on referral lookup. Send along the already-allocated fattr along with nfs4_fs_locations, and drop the memcpy of fattr. We end up growing two more allocations, but this fixes up a crash as: PID: 790 TASK: ffff88811b43c000 CPU: 0 COMMAND: "ls" #0 [ffffc90000857920] panic at ffffffff81b9bfde #1 [ffffc900008579c0] do_trap at ffffffff81023a9b #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs] #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f #7 [ffffc90000857c60] walk_component at ffffffff813a86c4 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals Kuee reported a corner case where the tnum becomes constant after the call to __reg_bound_offset(), but the register's bounds are not, that is, its min bounds are still not equal to the register's max bounds. This in turn allows to leak pointers through turning a pointer register as is into an unknown scalar via adjust_ptr_min_max_vals(). Before: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)) <--- [*] 10: (95) exit What can be seen here is that R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) after the operation R3 += -32767 results in a 'malformed' constant, that is, R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)). Intersecting with var_off has not been done at that point via __update_reg_bounds(), which would have improved the umax to be equal to umin. Refactor the tnum <> min/max bounds information flow into a reg_bounds_sync() helper and use it consistently everywhere. After the fix, bounds have been corrected to R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) and thus the register is regarded as a 'proper' constant scalar of 0. After: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0 ---truncated---

A NULL pointer dereference flaw was found in the az6027 driver in drivers/media/usb/dev-usb/az6027.c in the Linux Kernel. The message from user space is not checked properly before transferring into the device. This flaw allows a local user to crash the system or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix a potential memory leak in r871xu_drv_init() In r871xu_drv_init(), if r8712_init_drv_sw() fails, then the memory allocated by r8712_alloc_io_queue() in r8712_usb_dvobj_init() is not properly released as there is no action will be performed by r8712_usb_dvobj_deinit(). To properly release it, we should call r8712_free_io_queue() in r8712_usb_dvobj_deinit(). Besides, in r871xu_dev_remove(), r8712_usb_dvobj_deinit() will be called by r871x_dev_unload() under condition `padapter->bup` and r8712_free_io_queue() is called by r8712_free_drv_sw(). However, r8712_usb_dvobj_deinit() does not rely on `padapter->bup` and calling r8712_free_io_queue() in r8712_free_drv_sw() is negative for better understading the code. So I move r8712_usb_dvobj_deinit() into r871xu_dev_remove(), and remove r8712_free_io_queue() from r8712_free_drv_sw().

In the Linux kernel, the following vulnerability has been resolved: tipc: fix kernel panic when enabling bearer When enabling a bearer on a node, a kernel panic is observed: [ 4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc] ... [ 4.520030] Call Trace: [ 4.520689] <IRQ> [ 4.521236] tipc_link_build_proto_msg+0x375/0x750 [tipc] [ 4.522654] tipc_link_build_state_msg+0x48/0xc0 [tipc] [ 4.524034] __tipc_node_link_up+0xd7/0x290 [tipc] [ 4.525292] tipc_rcv+0x5da/0x730 [tipc] [ 4.526346] ? __netif_receive_skb_core+0xb7/0xfc0 [ 4.527601] tipc_l2_rcv_msg+0x5e/0x90 [tipc] [ 4.528737] __netif_receive_skb_list_core+0x20b/0x260 [ 4.530068] netif_receive_skb_list_internal+0x1bf/0x2e0 [ 4.531450] ? dev_gro_receive+0x4c2/0x680 [ 4.532512] napi_complete_done+0x6f/0x180 [ 4.533570] virtnet_poll+0x29c/0x42e [virtio_net] ... The node in question is receiving activate messages in another thread after changing bearer status to allow message sending/ receiving in current thread: thread 1 | thread 2 -------- | -------- | tipc_enable_bearer() | test_and_set_bit_lock() | tipc_bearer_xmit_skb() | | tipc_l2_rcv_msg() | tipc_rcv() | __tipc_node_link_up() | tipc_link_build_state_msg() | tipc_link_build_proto_msg() | tipc_mon_prep() | { | ... | // null-pointer dereference | u16 gen = mon->dom_gen; | ... | } // Not being executed yet | tipc_mon_create() | { | ... | // allocate | mon = kzalloc(); | ... | } | Monitoring pointer in thread 2 is dereferenced before monitoring data is allocated in thread 1. This causes kernel panic. This commit fixes it by allocating the monitoring data before enabling the bearer to receive messages.

A memory out-of-bounds read flaw was found in the Linux kernel before 5.9-rc2 with the ext3/ext4 file system, in the way it accesses a directory with broken indexing. This flaw allows a local user to crash the system if the directory exists. The highest threat from this vulnerability is to system availability.

In the Linux kernel, the following vulnerability has been resolved: x86/kexec: fix memory leak of elf header buffer This is reported by kmemleak detector: unreferenced object 0xffffc900002a9000 (size 4096): comm "kexec", pid 14950, jiffies 4295110793 (age 373.951s) hex dump (first 32 bytes): 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 .ELF............ 04 00 3e 00 01 00 00 00 00 00 00 00 00 00 00 00 ..>............. backtrace: [<0000000016a8ef9f>] __vmalloc_node_range+0x101/0x170 [<000000002b66b6c0>] __vmalloc_node+0xb4/0x160 [<00000000ad40107d>] crash_prepare_elf64_headers+0x8e/0xcd0 [<0000000019afff23>] crash_load_segments+0x260/0x470 [<0000000019ebe95c>] bzImage64_load+0x814/0xad0 [<0000000093e16b05>] arch_kexec_kernel_image_load+0x1be/0x2a0 [<000000009ef2fc88>] kimage_file_alloc_init+0x2ec/0x5a0 [<0000000038f5a97a>] __do_sys_kexec_file_load+0x28d/0x530 [<0000000087c19992>] do_syscall_64+0x3b/0x90 [<0000000066e063a4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In crash_prepare_elf64_headers(), a buffer is allocated via vmalloc() to store elf headers. While it's not freed back to system correctly when kdump kernel is reloaded or unloaded. Then memory leak is caused. Fix it by introducing x86 specific function arch_kimage_file_post_load_cleanup(), and freeing the buffer there. And also remove the incorrect elf header buffer freeing code. Before calling arch specific kexec_file loading function, the image instance has been initialized. So 'image->elf_headers' must be NULL. It doesn't make sense to free the elf header buffer in the place. Three different people have reported three bugs about the memory leak on x86_64 inside Redhat.

A NULL pointer dereference flaw was found in the UNIX protocol in net/unix/diag.c In unix_diag_get_exact in the Linux Kernel. The newly allocated skb does not have sk, leading to a NULL pointer. This flaw allows a local user to crash or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: net/9p: fix uninit-value in p9_client_rpc() Syzbot with the help of KMSAN reported the following error: BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline] BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 trace_9p_client_res include/trace/events/9p.h:146 [inline] p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: __alloc_pages+0x9d6/0xe70 mm/page_alloc.c:4598 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2175 [inline] allocate_slab mm/slub.c:2338 [inline] new_slab+0x2de/0x1400 mm/slub.c:2391 ___slab_alloc+0x1184/0x33d0 mm/slub.c:3525 __slab_alloc mm/slub.c:3610 [inline] __slab_alloc_node mm/slub.c:3663 [inline] slab_alloc_node mm/slub.c:3835 [inline] kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852 p9_tag_alloc net/9p/client.c:278 [inline] p9_client_prepare_req+0x20a/0x1770 net/9p/client.c:641 p9_client_rpc+0x27e/0x1340 net/9p/client.c:688 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 If p9_check_errors() fails early in p9_client_rpc(), req->rc.tag will not be properly initialized. However, trace_9p_client_res() ends up trying to print it out anyway before p9_client_rpc() finishes. Fix this issue by assigning default values to p9_fcall fields such as 'tag' and (just in case KMSAN unearths something new) 'id' during the tag allocation stage.

A use-after-free vulnerabilitity was discovered in drivers/net/hamradio/6pack.c of linux that allows an attacker to crash linux kernel by simulating ax25 device using 6pack driver from user space.

A flaw was found in the Linux kernel. A denial of service problem is identified if an extent tree is corrupted in a crafted ext4 filesystem in fs/ext4/extents.c in ext4_es_cache_extent. Fabricating an integer overflow, A local attacker with a special user privilege may cause a system crash problem which can lead to an availability threat.

In the Linux kernel, the following vulnerability has been resolved: net: skb_partial_csum_set() fix against transport header magic value skb->transport_header uses the special 0xFFFF value to mark if the transport header was set or not. We must prevent callers to accidentaly set skb->transport_header to 0xFFFF. Note that only fuzzers can possibly do this today. syzbot reported: WARNING: CPU: 0 PID: 2340 at include/linux/skbuff.h:2847 skb_transport_offset include/linux/skbuff.h:2956 [inline] WARNING: CPU: 0 PID: 2340 at include/linux/skbuff.h:2847 virtio_net_hdr_to_skb+0xbcc/0x10c0 include/linux/virtio_net.h:103 Modules linked in: CPU: 0 PID: 2340 Comm: syz-executor.0 Not tainted 6.3.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 RIP: 0010:skb_transport_header include/linux/skbuff.h:2847 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:2956 [inline] RIP: 0010:virtio_net_hdr_to_skb+0xbcc/0x10c0 include/linux/virtio_net.h:103 Code: 41 39 df 0f 82 c3 04 00 00 48 8b 7c 24 10 44 89 e6 e8 08 6e 59 ff 48 85 c0 74 54 e8 ce 36 7e fc e9 37 f8 ff ff e8 c4 36 7e fc <0f> 0b e9 93 f8 ff ff 44 89 f7 44 89 e6 e8 32 38 7e fc 45 39 e6 0f RSP: 0018:ffffc90004497880 EFLAGS: 00010293 RAX: ffffffff84fea55c RBX: 000000000000ffff RCX: ffff888120be2100 RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff RBP: ffffc90004497990 R08: ffffffff84fe9de5 R09: 0000000000000034 R10: ffffea00048ebd80 R11: 0000000000000034 R12: ffff88811dc2d9c8 R13: dffffc0000000000 R14: ffff88811dc2d9ae R15: 1ffff11023b85b35 FS: 00007f9211a59700(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200002c0 CR3: 00000001215a5000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> packet_snd net/packet/af_packet.c:3076 [inline] packet_sendmsg+0x4590/0x61a0 net/packet/af_packet.c:3115 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] __sys_sendto+0x472/0x630 net/socket.c:2144 __do_sys_sendto net/socket.c:2156 [inline] __se_sys_sendto net/socket.c:2152 [inline] __x64_sys_sendto+0xe5/0x100 net/socket.c:2152 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f9210c8c169 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9211a59168 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9210dabf80 RCX: 00007f9210c8c169 RDX: 000000000000ffed RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 00007f9210ce7ca1 R08: 0000000020000540 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe135d65cf R14: 00007f9211a59300 R15: 0000000000022000

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix memory leak in alloc_wbufs() kmemleak reported a sequence of memory leaks, and show them as following: unreferenced object 0xffff8881575f8400 (size 1024): comm "mount", pid 19625, jiffies 4297119604 (age 20.383s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa0406b2b>] ubifs_mount+0x307b/0x7170 [ubifs] [<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0 [<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230 [<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0 [<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270 [<ffffffff83c14295>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff8881798a6e00 (size 512): comm "mount", pid 19677, jiffies 4297121912 (age 37.816s) hex dump (first 32 bytes): 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa0418342>] ubifs_wbuf_init+0x52/0x480 [ubifs] [<ffffffffa0406ca5>] ubifs_mount+0x31f5/0x7170 [ubifs] [<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0 [<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230 [<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0 [<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270 [<ffffffff83c14295>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The problem is that the ubifs_wbuf_init() returns an error in the loop which in the alloc_wbufs(), then the wbuf->buf and wbuf->inodes that were successfully alloced before are not freed. Fix it by adding error hanging path in alloc_wbufs() which frees the memory alloced before when ubifs_wbuf_init() returns an error.

In the Linux kernel, the following vulnerability has been resolved: perf trace: Really free the evsel->priv area In 3cb4d5e00e037c70 ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1".

gss_mech_free in net/sunrpc/auth_gss/gss_mech_switch.c in the rpcsec_gss_krb5 implementation in the Linux kernel through 5.6.10 lacks certain domain_release calls, leading to a memory leak. Note: This was disputed with the assertion that the issue does not grant any access not already available. It is a problem that on unloading a specific kernel module some memory is leaked, but loading kernel modules is a privileged operation. A user could also write a kernel module to consume any amount of memory they like and load that replicating the effect of this bug

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Fix SKB corruption in REO destination ring While running traffics for a long time, randomly an RX descriptor filled with value "0" from REO destination ring is received. This descriptor which is invalid causes the wrong SKB (SKB stored in the IDR lookup with buffer id "0") to be fetched which in turn causes SKB memory corruption issue and the same leads to crash after some time. Changed the start id for idr allocation to "1" and the buffer id "0" is reserved for error validation. Introduced Sanity check to validate the descriptor, before processing the SKB. Crash Signature : Unable to handle kernel paging request at virtual address 3f004900 PC points to "b15_dma_inv_range+0x30/0x50" LR points to "dma_cache_maint_page+0x8c/0x128". The Backtrace obtained is as follows: [<8031716c>] (b15_dma_inv_range) from [<80313a4c>] (dma_cache_maint_page+0x8c/0x128) [<80313a4c>] (dma_cache_maint_page) from [<80313b90>] (__dma_page_dev_to_cpu+0x28/0xcc) [<80313b90>] (__dma_page_dev_to_cpu) from [<7fb5dd68>] (ath11k_dp_process_rx+0x1e8/0x4a4 [ath11k]) [<7fb5dd68>] (ath11k_dp_process_rx [ath11k]) from [<7fb53c20>] (ath11k_dp_service_srng+0xb0/0x2ac [ath11k]) [<7fb53c20>] (ath11k_dp_service_srng [ath11k]) from [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll+0x1c/0x78 [ath11k_pci]) [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll [ath11k_pci]) from [<807d5cf4>] (__napi_poll+0x28/0xb8) [<807d5cf4>] (__napi_poll) from [<807d5f28>] (net_rx_action+0xf0/0x280) [<807d5f28>] (net_rx_action) from [<80302148>] (__do_softirq+0xd0/0x280) [<80302148>] (__do_softirq) from [<80320408>] (irq_exit+0x74/0xd4) [<80320408>] (irq_exit) from [<803638a4>] (__handle_domain_irq+0x90/0xb4) [<803638a4>] (__handle_domain_irq) from [<805bedec>] (gic_handle_irq+0x58/0x90) [<805bedec>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

A flaw null pointer dereference in the Linux kernel UDF file system functionality was found in the way user triggers udf_file_write_iter function for the malicious UDF image. A local user could use this flaw to crash the system. Actual from Linux kernel 4.2-rc1 till 5.17-rc2.

In the Linux kernel, the following vulnerability has been resolved: iocost: Fix divide-by-zero on donation from low hweight cgroup The donation calculation logic assumes that the donor has non-zero after-donation hweight, so the lowest active hweight a donating cgroup can have is 2 so that it can donate 1 while keeping the other 1 for itself. Earlier, we only donated from cgroups with sizable surpluses so this condition was always true. However, with the precise donation algorithm implemented, f1de2439ec43 ("blk-iocost: revamp donation amount determination") made the donation amount calculation exact enabling even low hweight cgroups to donate. This means that in rare occasions, a cgroup with active hweight of 1 can enter donation calculation triggering the following warning and then a divide-by-zero oops. WARNING: CPU: 4 PID: 0 at block/blk-iocost.c:1928 transfer_surpluses.cold+0x0/0x53 [884/94867] ... RIP: 0010:transfer_surpluses.cold+0x0/0x53 Code: 92 ff 48 c7 c7 28 d1 ab b5 65 48 8b 34 25 00 ae 01 00 48 81 c6 90 06 00 00 e8 8b 3f fe ff 48 c7 c0 ea ff ff ff e9 95 ff 92 ff <0f> 0b 48 c7 c7 30 da ab b5 e8 71 3f fe ff 4c 89 e8 4d 85 ed 74 0 4 ... Call Trace: <IRQ> ioc_timer_fn+0x1043/0x1390 call_timer_fn+0xa1/0x2c0 __run_timers.part.0+0x1ec/0x2e0 run_timer_softirq+0x35/0x70 ... iocg: invalid donation weights in /a/b: active=1 donating=1 after=0 Fix it by excluding cgroups w/ active hweight < 2 from donating. Excluding these extreme low hweight donations shouldn't affect work conservation in any meaningful way.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/devfreq: Fix OPP refcnt leak

In the Linux kernel, the following vulnerability has been resolved: ice: Avoid crash from unnecessary IDA free In the remove path, there is an attempt to free the aux_idx IDA whether it was allocated or not. This can potentially cause a crash when unloading the driver on systems that do not initialize support for RDMA. But, this free cannot be gated by the status bit for RDMA, since it is allocated if the driver detects support for RDMA at probe time, but the driver can enter into a state where RDMA is not supported after the IDA has been allocated at probe time and this would lead to a memory leak. Initialize aux_idx to an invalid value and check for a valid value when unloading to determine if an IDA free is necessary.

In the Linux kernel, the following vulnerability has been resolved: PCI: pciehp: Fix infinite loop in IRQ handler upon power fault The Power Fault Detected bit in the Slot Status register differs from all other hotplug events in that it is sticky: It can only be cleared after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8: If a power controller detects a main power fault on the hot-plug slot, it must automatically set its internal main power fault latch [...]. The main power fault latch is cleared when software turns off power to the hot-plug slot. The stickiness used to cause interrupt storms and infinite loops which were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable software notification on empty slots"). Unfortunately in 2020 the infinite loop issue was inadvertently reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race"): The hardirq handler pciehp_isr() clears the PFD bit until pciehp's power_fault_detected flag is set. That happens in the IRQ thread pciehp_ist(), which never learns of the event because the hardirq handler is stuck in an infinite loop. Fix by setting the power_fault_detected flag already in the hardirq handler.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Arturo reported this backtrace: [709732.358791] WARNING: CPU: 3 PID: 456 at arch/x86/kernel/fpu/core.c:128 kernel_fpu_begin_mask+0xae/0xe0 [709732.358793] Modules linked in: binfmt_misc nft_nat nft_chain_nat nf_nat nft_counter nft_ct nf_tables nf_conntrack_netlink nfnetlink 8021q garp stp mrp llc vrf intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul mgag200 ghash_clmulni_intel drm_kms_helper cec aesni_intel drm libaes crypto_simd cryptd glue_helper mei_me dell_smbios iTCO_wdt evdev intel_pmc_bxt iTCO_vendor_support dcdbas pcspkr rapl dell_wmi_descriptor wmi_bmof sg i2c_algo_bit watchdog mei acpi_ipmi ipmi_si button nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipmi_devintf ipmi_msghandler ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor sd_mod t10_pi crc_t10dif crct10dif_generic raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ahci libahci tg3 libata xhci_pci libphy xhci_hcd ptp usbcore crct10dif_pclmul crct10dif_common bnxt_en crc32c_intel scsi_mod [709732.358941] pps_core i2c_i801 lpc_ich i2c_smbus wmi usb_common [709732.358957] CPU: 3 PID: 456 Comm: jbd2/dm-0-8 Not tainted 5.10.0-0.bpo.5-amd64 #1 Debian 5.10.24-1~bpo10+1 [709732.358959] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020 [709732.358964] RIP: 0010:kernel_fpu_begin_mask+0xae/0xe0 [709732.358969] Code: ae 54 24 04 83 e3 01 75 38 48 8b 44 24 08 65 48 33 04 25 28 00 00 00 75 33 48 83 c4 10 5b c3 65 8a 05 5e 21 5e 76 84 c0 74 92 <0f> 0b eb 8e f0 80 4f 01 40 48 81 c7 00 14 00 00 e8 dd fb ff ff eb [709732.358972] RSP: 0018:ffffbb9700304740 EFLAGS: 00010202 [709732.358976] RAX: 0000000000000001 RBX: 0000000000000003 RCX: 0000000000000001 [709732.358979] RDX: ffffbb9700304970 RSI: ffff922fe1952e00 RDI: 0000000000000003 [709732.358981] RBP: ffffbb9700304970 R08: ffff922fc868a600 R09: ffff922fc711e462 [709732.358984] R10: 000000000000005f R11: ffff922ff0b27180 R12: ffffbb9700304960 [709732.358987] R13: ffffbb9700304b08 R14: ffff922fc664b6c8 R15: ffff922fc664b660 [709732.358990] FS: 0000000000000000(0000) GS:ffff92371fec0000(0000) knlGS:0000000000000000 [709732.358993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [709732.358996] CR2: 0000557a6655bdd0 CR3: 000000026020a001 CR4: 00000000007706e0 [709732.358999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [709732.359001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [709732.359003] PKRU: 55555554 [709732.359005] Call Trace: [709732.359009] <IRQ> [709732.359035] nft_pipapo_avx2_lookup+0x4c/0x1cba [nf_tables] [709732.359046] ? sched_clock+0x5/0x10 [709732.359054] ? sched_clock_cpu+0xc/0xb0 [709732.359061] ? record_times+0x16/0x80 [709732.359068] ? plist_add+0xc1/0x100 [709732.359073] ? psi_group_change+0x47/0x230 [709732.359079] ? skb_clone+0x4d/0xb0 [709732.359085] ? enqueue_task_rt+0x22b/0x310 [709732.359098] ? bnxt_start_xmit+0x1e8/0xaf0 [bnxt_en] [709732.359102] ? packet_rcv+0x40/0x4a0 [709732.359121] nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359133] nft_do_chain+0x350/0x500 [nf_tables] [709732.359152] ? nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359163] ? nft_do_chain+0x364/0x500 [nf_tables] [709732.359172] ? fib4_rule_action+0x6d/0x80 [709732.359178] ? fib_rules_lookup+0x107/0x250 [709732.359184] nft_nat_do_chain+0x8a/0xf2 [nft_chain_nat] [709732.359193] nf_nat_inet_fn+0xea/0x210 [nf_nat] [709732.359202] nf_nat_ipv4_out+0x14/0xa0 [nf_nat] [709732.359207] nf_hook_slow+0x44/0xc0 [709732.359214] ip_output+0xd2/0x100 [709732.359221] ? __ip_finish_output+0x210/0x210 [709732.359226] ip_forward+0x37d/0x4a0 [709732.359232] ? ip4_key_hashfn+0xb0/0xb0 [709732.359238] ip_subli ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after conversion from inline format Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") uncovered a latent bug in ocfs2 conversion from inline inode format to a normal inode format. The code in ocfs2_convert_inline_data_to_extents() attempts to zero out the whole cluster allocated for file data by grabbing, zeroing, and dirtying all pages covering this cluster. However these pages are beyond i_size, thus writeback code generally ignores these dirty pages and no blocks were ever actually zeroed on the disk. This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero pages past i_size.") for standard ocfs2 write path, inline conversion path was apparently forgotten; the commit log also has a reasoning why the zeroing actually is not needed. After commit 6dbf7bb55598, things became worse as writeback code stopped invalidating buffers on pages beyond i_size and thus these pages end up with clean PageDirty bit but with buffers attached to these pages being still dirty. So when a file is converted from inline format, then writeback triggers, and then the file is grown so that these pages become valid, the invalid dirtiness state is preserved, mark_buffer_dirty() does nothing on these pages (buffers are already dirty) but page is never written back because it is clean. So data written to these pages is lost once pages are reclaimed. Simple reproducer for the problem is: xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \ -c "pwrite 4000 2000" ocfs2_file After unmounting and mounting the fs again, you can observe that end of 'ocfs2_file' has lost its contents. Fix the problem by not doing the pointless zeroing during conversion from inline format similarly as in the standard write path. [akpm@linux-foundation.org: fix whitespace, per Joseph]

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Don't attempt to resume the ports before they exist This will fix null pointer dereference that was caused by the driver attempting to resume ports that were not yet registered.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tail_call_reachable rejection for interpreter when jit failed During testing of f263a81451c1 ("bpf: Track subprog poke descriptors correctly and fix use-after-free") under various failure conditions, for example, when jit_subprogs() fails and tries to clean up the program to be run under the interpreter, we ran into the following freeze: [...] #127/8 tailcall_bpf2bpf_3:FAIL [...] [ 92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20 [ 92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682 [ 92.043707] [ 92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G O 5.13.0-53301-ge6c08cb33a30-dirty #87 [ 92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 92.046785] Call Trace: [ 92.047171] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.047773] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.048389] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.049019] ? ktime_get+0x117/0x130 [...] // few hundred [similar] lines more [ 92.659025] ? ktime_get+0x117/0x130 [ 92.659845] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.660738] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.661528] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.662378] ? print_usage_bug+0x50/0x50 [ 92.663221] ? print_usage_bug+0x50/0x50 [ 92.664077] ? bpf_ksym_find+0x9c/0xe0 [ 92.664887] ? ktime_get+0x117/0x130 [ 92.665624] ? kernel_text_address+0xf5/0x100 [ 92.666529] ? __kernel_text_address+0xe/0x30 [ 92.667725] ? unwind_get_return_address+0x2f/0x50 [ 92.668854] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.670185] ? ktime_get+0x117/0x130 [ 92.671130] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.672020] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.672860] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.675159] ? ktime_get+0x117/0x130 [ 92.677074] ? lock_is_held_type+0xd5/0x130 [ 92.678662] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.680046] ? ktime_get+0x117/0x130 [ 92.681285] ? __bpf_prog_run32+0x6b/0x90 [ 92.682601] ? __bpf_prog_run64+0x90/0x90 [ 92.683636] ? lock_downgrade+0x370/0x370 [ 92.684647] ? mark_held_locks+0x44/0x90 [ 92.685652] ? ktime_get+0x117/0x130 [ 92.686752] ? lockdep_hardirqs_on+0x79/0x100 [ 92.688004] ? ktime_get+0x117/0x130 [ 92.688573] ? __cant_migrate+0x2b/0x80 [ 92.689192] ? bpf_test_run+0x2f4/0x510 [ 92.689869] ? bpf_test_timer_continue+0x1c0/0x1c0 [ 92.690856] ? rcu_read_lock_bh_held+0x90/0x90 [ 92.691506] ? __kasan_slab_alloc+0x61/0x80 [ 92.692128] ? eth_type_trans+0x128/0x240 [ 92.692737] ? __build_skb+0x46/0x50 [ 92.693252] ? bpf_prog_test_run_skb+0x65e/0xc50 [ 92.693954] ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0 [ 92.694639] ? __fget_light+0xa1/0x100 [ 92.695162] ? bpf_prog_inc+0x23/0x30 [ 92.695685] ? __sys_bpf+0xb40/0x2c80 [ 92.696324] ? bpf_link_get_from_fd+0x90/0x90 [ 92.697150] ? mark_held_locks+0x24/0x90 [ 92.698007] ? lockdep_hardirqs_on_prepare+0x124/0x220 [ 92.699045] ? finish_task_switch+0xe6/0x370 [ 92.700072] ? lockdep_hardirqs_on+0x79/0x100 [ 92.701233] ? finish_task_switch+0x11d/0x370 [ 92.702264] ? __switch_to+0x2c0/0x740 [ 92.703148] ? mark_held_locks+0x24/0x90 [ 92.704155] ? __x64_sys_bpf+0x45/0x50 [ 92.705146] ? do_syscall_64+0x35/0x80 [ 92.706953] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Turns out that the program rejection from e411901c0b77 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable is never true. Commit ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") added a tracker into check_max_stack_depth() which propagates the tail_call_reachable condition throughout the subprograms. This info is then assigned to the subprogram's ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: fix null deref in parse dev addr Fix a logic error that could result in a null deref if the user sets the mode incorrectly for the given addr type.

In the Linux kernel, the following vulnerability has been resolved: mm, slub: fix potential memoryleak in kmem_cache_open() In error path, the random_seq of slub cache might be leaked. Fix this by using __kmem_cache_release() to release all the relevant resources.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix possible null pointer dereference. This patch fixes possible null pointer dereference in files "rvu_debugfs.c" and "rvu_nix.c"

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix Null-point-dereference in fmt_single_name() Check the return value of devm_kstrdup() in case of Null-point-dereference.

In the Linux kernel, the following vulnerability has been resolved: phonet/pep: refuse to enable an unbound pipe This ioctl() implicitly assumed that the socket was already bound to a valid local socket name, i.e. Phonet object. If the socket was not bound, two separate problems would occur: 1) We'd send an pipe enablement request with an invalid source object. 2) Later socket calls could BUG on the socket unexpectedly being connected yet not bound to a valid object.

An issue was discovered in xfs_agf_verify in fs/xfs/libxfs/xfs_alloc.c in the Linux kernel through 5.6.10. Attackers may trigger a sync of excessive duration via an XFS v5 image with crafted metadata, aka CID-d0c7feaf8767.

In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadgets null ptr deref on 10gbps cabling. This avoids a null pointer dereference in f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm} by simply reusing the 5gbps config for 10gbps.

In the Linux kernel, the following vulnerability has been resolved: dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock __dma_entry_alloc_check_leak() calls into printk -> serial console output (qcom geni) and grabs port->lock under free_entries_lock spin lock, which is a reverse locking dependency chain as qcom_geni IRQ handler can call into dma-debug code and grab free_entries_lock under port->lock. Move __dma_entry_alloc_check_leak() call out of free_entries_lock scope so that we don't acquire serial console's port->lock under it. Trimmed-down lockdep splat: The existing dependency chain (in reverse order) is: -> #2 (free_entries_lock){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 dma_entry_alloc+0x38/0x110 debug_dma_map_page+0x60/0xf8 dma_map_page_attrs+0x1e0/0x230 dma_map_single_attrs.constprop.0+0x6c/0xc8 geni_se_rx_dma_prep+0x40/0xcc qcom_geni_serial_isr+0x310/0x510 __handle_irq_event_percpu+0x110/0x244 handle_irq_event_percpu+0x20/0x54 handle_irq_event+0x50/0x88 handle_fasteoi_irq+0xa4/0xcc handle_irq_desc+0x28/0x40 generic_handle_domain_irq+0x24/0x30 gic_handle_irq+0xc4/0x148 do_interrupt_handler+0xa4/0xb0 el1_interrupt+0x34/0x64 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 arch_local_irq_enable+0x4/0x8 ____do_softirq+0x18/0x24 ... -> #1 (&port_lock_key){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 qcom_geni_serial_console_write+0x184/0x1dc console_flush_all+0x344/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 register_console+0x230/0x38c uart_add_one_port+0x338/0x494 qcom_geni_serial_probe+0x390/0x424 platform_probe+0x70/0xc0 really_probe+0x148/0x280 __driver_probe_device+0xfc/0x114 driver_probe_device+0x44/0x100 __device_attach_driver+0x64/0xdc bus_for_each_drv+0xb0/0xd8 __device_attach+0xe4/0x140 device_initial_probe+0x1c/0x28 bus_probe_device+0x44/0xb0 device_add+0x538/0x668 of_device_add+0x44/0x50 of_platform_device_create_pdata+0x94/0xc8 of_platform_bus_create+0x270/0x304 of_platform_populate+0xac/0xc4 devm_of_platform_populate+0x60/0xac geni_se_probe+0x154/0x160 platform_probe+0x70/0xc0 ... -> #0 (console_owner){-...}-{0:0}: __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4 dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm] msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ... Chain exists of: console_owner --> &port_lock_key --> free_entries_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(free_entries_lock); lock(&port_lock_key); lock(free_entries_lock); lock(console_owner); *** DEADLOCK *** Call trace: dump_backtrace+0xb4/0xf0 show_stack+0x20/0x30 dump_stack_lvl+0x60/0x84 dump_stack+0x18/0x24 print_circular_bug+0x1cc/0x234 check_noncircular+0x78/0xac __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 consol ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy() After the commit in Fixes:, if a module that created a slab cache does not release all of its allocated objects before destroying the cache (at rmmod time), we might end up releasing the kmem_cache object without removing it from the slab_caches list thus corrupting the list as kmem_cache_destroy() ignores the return value from shutdown_cache(), which in turn never removes the kmem_cache object from slabs_list in case __kmem_cache_shutdown() fails to release all of the cache's slabs. This is easily observable on a kernel built with CONFIG_DEBUG_LIST=y as after that ill release the system will immediately trip on list_add, or list_del, assertions similar to the one shown below as soon as another kmem_cache gets created, or destroyed: [ 1041.213632] list_del corruption. next->prev should be ffff89f596fb5768, but was 52f1e5016aeee75d. (next=ffff89f595a1b268) [ 1041.219165] ------------[ cut here ]------------ [ 1041.221517] kernel BUG at lib/list_debug.c:62! [ 1041.223452] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 1041.225408] CPU: 2 PID: 1852 Comm: rmmod Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 1041.228244] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 1041.231212] RIP: 0010:__list_del_entry_valid+0xae/0xb0 Another quick way to trigger this issue, in a kernel with CONFIG_SLUB=y, is to set slub_debug to poison the released objects and then just run cat /proc/slabinfo after removing the module that leaks slab objects, in which case the kernel will panic: [ 50.954843] general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 [#1] PREEMPT SMP PTI [ 50.961545] CPU: 2 PID: 1495 Comm: cat Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 50.966808] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 50.972663] RIP: 0010:get_slabinfo+0x42/0xf0 This patch fixes this issue by properly checking shutdown_cache()'s return value before taking the kmem_cache_release() branch.

In the Linux kernel, the following vulnerability has been resolved: net: fec: Use page_pool_put_full_page when freeing rx buffers The page_pool_release_page was used when freeing rx buffers, and this function just unmaps the page (if mapped) and does not recycle the page. So after hundreds of down/up the eth0, the system will out of memory. For more details, please refer to the following reproduce steps and bug logs. To solve this issue and refer to the doc of page pool, the page_pool_put_full_page should be used to replace page_pool_release_page. Because this API will try to recycle the page if the page refcnt equal to 1. After testing 20000 times, the issue can not be reproduced anymore (about testing 391 times the issue will occur on i.MX8MN-EVK before). Reproduce steps: Create the test script and run the script. The script content is as follows: LOOPS=20000 i=1 while [ $i -le $LOOPS ] do echo "TINFO:ENET $curface up and down test $i times" org_macaddr=$(cat /sys/class/net/eth0/address) ifconfig eth0 down ifconfig eth0 hw ether $org_macaddr up i=$(expr $i + 1) done sleep 5 if cat /sys/class/net/eth0/operstate | grep 'up';then echo "TEST PASS" else echo "TEST FAIL" fi Bug detail logs: TINFO:ENET up and down test 391 times [ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec [ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec TINFO:ENET up and down test 392 times [ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec [ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec [ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec [ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec [ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec [ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec [ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec TINFO:ENET up and down test 393 times [ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec [ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec [ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec [ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec [ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec [ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec [ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec [ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec [ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec [ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec [ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec TINFO:ENET up and down test 394 times [ 1492.8305 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel_pmc_core: fix memleak on registration failure In case device registration fails during module initialisation, the platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name).

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix a memleak bug in rvu_mbox_init() In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: ptp: Fix possible memory leak in ptp_clock_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88800906c618 (size 8): comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s) hex dump (first 8 bytes): 70 74 70 30 00 00 00 00 ptp0.... backtrace: [<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000079f6e2ff>] kvasprintf+0xb5/0x150 [<0000000026aae54f>] kvasprintf_const+0x60/0x190 [<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150 [<000000004e35abdd>] dev_set_name+0xc0/0x100 [<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp] [<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33] When posix_clock_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used to give up the device reference, then the name will be freed in kobject_cleanup() and other memory will be freed in ptp_clock_release().

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix tc flower deletion for VLAN priority Rx steering To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue.

In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix potential NULL pointer dereference devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at registration that will cause NULL pointer dereference since corresponding data is not initialized yet. The patch moves initialization of data before devm_add_action_or_reset(). Found by Linux Driver Verification project (linuxtesting.org). [jkosina@suse.cz: rebase]