In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF When we want to know whether we should look for the mac_id or the link_id in struct iwl_mvm_session_prot_notif, we should look at the version of SESSION_PROTECTION_NOTIF. This causes WARNINGs: WARNING: CPU: 0 PID: 11403 at drivers/net/wireless/intel/iwlwifi/mvm/time-event.c:959 iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] RIP: 0010:iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] Code: 00 49 c7 84 24 48 07 00 00 00 00 00 00 41 c6 84 24 78 07 00 00 ff 4c 89 f7 e8 e9 71 54 d9 e9 7d fd ff ff 0f 0b e9 23 fe ff ff <0f> 0b e9 1c fe ff ff 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffb4bb00003d40 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff9ae63a361000 RCX: ffff9ae4a98b60d4 RDX: ffff9ae4588499c0 RSI: 0000000000000305 RDI: ffff9ae4a98b6358 RBP: ffffb4bb00003d68 R08: 0000000000000003 R09: 0000000000000010 R10: ffffb4bb00003d00 R11: 000000000000000f R12: ffff9ae441399050 R13: ffff9ae4761329e8 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9ae7af400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fb75680018 CR3: 00000003dae32006 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x69/0x80 ? __warn+0x8d/0x150 ? iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] ? report_bug+0x196/0x1c0 ? handle_bug+0x45/0x80 ? exc_invalid_op+0x1c/0xb0 ? asm_exc_invalid_op+0x1f/0x30 ? iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] iwl_mvm_rx_common+0x115/0x340 [iwlmvm] iwl_mvm_rx_mq+0xa6/0x100 [iwlmvm] iwl_pcie_rx_handle+0x263/0xa10 [iwlwifi] iwl_pcie_napi_poll_msix+0x32/0xd0 [iwlwifi]

In the Linux kernel, the following vulnerability has been resolved: net/sched: fix lockdep splat in qdisc_tree_reduce_backlog() qdisc_tree_reduce_backlog() is called with the qdisc lock held, not RTNL. We must use qdisc_lookup_rcu() instead of qdisc_lookup() syzbot reported: WARNING: suspicious RCU usage 6.1.74-syzkaller #0 Not tainted ----------------------------- net/sched/sch_api.c:305 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by udevd/1142: #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline] #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline] #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: net_tx_action+0x64a/0x970 net/core/dev.c:5282 #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline] #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: net_tx_action+0x754/0x970 net/core/dev.c:5297 #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline] #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline] #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: qdisc_tree_reduce_backlog+0x84/0x580 net/sched/sch_api.c:792 stack backtrace: CPU: 1 PID: 1142 Comm: udevd Not tainted 6.1.74-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> [<ffffffff85b85f14>] __dump_stack lib/dump_stack.c:88 [inline] [<ffffffff85b85f14>] dump_stack_lvl+0x1b1/0x28f lib/dump_stack.c:106 [<ffffffff85b86007>] dump_stack+0x15/0x1e lib/dump_stack.c:113 [<ffffffff81802299>] lockdep_rcu_suspicious+0x1b9/0x260 kernel/locking/lockdep.c:6592 [<ffffffff84f0054c>] qdisc_lookup+0xac/0x6f0 net/sched/sch_api.c:305 [<ffffffff84f037c3>] qdisc_tree_reduce_backlog+0x243/0x580 net/sched/sch_api.c:811 [<ffffffff84f5b78c>] pfifo_tail_enqueue+0x32c/0x4b0 net/sched/sch_fifo.c:51 [<ffffffff84fbcf63>] qdisc_enqueue include/net/sch_generic.h:833 [inline] [<ffffffff84fbcf63>] netem_dequeue+0xeb3/0x15d0 net/sched/sch_netem.c:723 [<ffffffff84eecab9>] dequeue_skb net/sched/sch_generic.c:292 [inline] [<ffffffff84eecab9>] qdisc_restart net/sched/sch_generic.c:397 [inline] [<ffffffff84eecab9>] __qdisc_run+0x249/0x1e60 net/sched/sch_generic.c:415 [<ffffffff84d7aa96>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125 [<ffffffff84d85d29>] net_tx_action+0x7c9/0x970 net/core/dev.c:5313 [<ffffffff85e002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:616 [<ffffffff81568bca>] invoke_softirq kernel/softirq.c:447 [inline] [<ffffffff81568bca>] __irq_exit_rcu+0xca/0x230 kernel/softirq.c:700 [<ffffffff81568ae9>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:712 [<ffffffff85b89f52>] sysvec_apic_timer_interrupt+0x42/0x90 arch/x86/kernel/apic/apic.c:1107 [<ffffffff85c00ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:656

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix re-dirty process of tree-log nodes There is a report of a transaction abort of -EAGAIN with the following script. #!/bin/sh for d in sda sdb; do mkfs.btrfs -d single -m single -f /dev/\${d} done mount /dev/sda /mnt/test mount /dev/sdb /mnt/scratch for dir in test scratch; do echo 3 >/proc/sys/vm/drop_caches fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \ --numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \ --group_reporting |& tee /dev/shm/fio.\${dir} echo 3 >/proc/sys/vm/drop_caches done for d in sda sdb; do umount /dev/\${d} done The stack trace is shown in below. [3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction) [3310.968060] BTRFS info (device sda): forced readonly [3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction. [3310.968065] ------------[ cut here ]------------ [3310.968066] BTRFS: Transaction aborted (error -11) [3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1 [3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021 [3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282 [3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027 [3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00 [3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48 [3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00 [3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58 [3310.968154] FS: 00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000 [3310.968157] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0 [3310.968160] PKRU: 55555554 [3310.968161] Call Trace: [3310.968167] ? dput+0xd4/0x300 [3310.968174] btrfs_sync_file+0x3f1/0x490 [3310.968180] __x64_sys_fsync+0x33/0x60 [3310.968185] do_syscall_64+0x3b/0x90 [3310.968190] entry_SYSCALL_64_after_hwframe+0x44/0xae [3310.968194] RIP: 0033:0x7efe6557329b [3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a [3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b [3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006 [3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010 [3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980 [3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000 [3310.968212] ---[ end trace 1a346f4d3c0d96ba ]--- [3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown The abort occurs because of a write hole while writing out freeing tree nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree node to ensure btrfs can write the region and does not leave a hole on write on a zoned device. The current code fails to re-dirty a node when the tree-log tree's depth is greater or equal to 2. That leads to a transaction abort with -EAGAIN. Fix the issue by properly re-dirtying a node on walking up the tree.

In the Linux kernel, the following vulnerability has been resolved: powerpc/32: Fix hardlockup on vmap stack overflow Since the commit c118c7303ad5 ("powerpc/32: Fix vmap stack - Do not activate MMU before reading task struct") a vmap stack overflow results in a hard lockup. This is because emergency_ctx is still addressed with its virtual address allthough data MMU is not active anymore at that time. Fix it by using a physical address instead.

In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Teardown PV features on boot CPU as well Various PV features (Async PF, PV EOI, steal time) work through memory shared with hypervisor and when we restore from hibernation we must properly teardown all these features to make sure hypervisor doesn't write to stale locations after we jump to the previously hibernated kernel (which can try to place anything there). For secondary CPUs the job is already done by kvm_cpu_down_prepare(), register syscore ops to do the same for boot CPU.

In the Linux kernel, the following vulnerability has been resolved: Julia Lawall reported this null pointer dereference, this should fix it.

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest() In commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") kvm_start_guest() became idle_kvm_start_guest(). The old code allocated a stack frame on the emergency stack, but didn't use the frame to store anything, and also didn't store anything in its caller's frame. idle_kvm_start_guest() on the other hand is written more like a normal C function, it creates a frame on entry, and also stores CR/LR into its callers frame (per the ABI). The problem is that there is no caller frame on the emergency stack. The emergency stack for a given CPU is allocated with: paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE; So emergency_sp actually points to the first address above the emergency stack allocation for a given CPU, we must not store above it without first decrementing it to create a frame. This is different to the regular kernel stack, paca->kstack, which is initialised to point at an initial frame that is ready to use. idle_kvm_start_guest() stores the backchain, CR and LR all of which write outside the allocation for the emergency stack. It then creates a stack frame and saves the non-volatile registers. Unfortunately the frame it creates is not large enough to fit the non-volatiles, and so the saving of the non-volatile registers also writes outside the emergency stack allocation. The end result is that we corrupt whatever is at 0-24 bytes, and 112-248 bytes above the emergency stack allocation. In practice this has gone unnoticed because the memory immediately above the emergency stack happens to be used for other stack allocations, either another CPUs mc_emergency_sp or an IRQ stack. See the order of calls to irqstack_early_init() and emergency_stack_init(). The low addresses of another stack are the top of that stack, and so are only used if that stack is under extreme pressue, which essentially never happens in practice - and if it did there's a high likelyhood we'd crash due to that stack overflowing. Still, we shouldn't be corrupting someone else's stack, and it is purely luck that we aren't corrupting something else. To fix it we save CR/LR into the caller's frame using the existing r1 on entry, we then create a SWITCH_FRAME_SIZE frame (which has space for pt_regs) on the emergency stack with the backchain pointing to the existing stack, and then finally we switch to the new frame on the emergency stack.

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: fix memory leak in nci_allocate_device nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev. Fix this by freeing hci_dev in nci_free_device. BUG: memory leak unreferenced object 0xffff888111ea6800 (size 1024): comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline] [<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline] [<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784 [<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline] [<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132 [<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153 [<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345 [<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 [<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740 [<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846 [<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914 [<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109 [<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164 [<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after conversion from inline format Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") uncovered a latent bug in ocfs2 conversion from inline inode format to a normal inode format. The code in ocfs2_convert_inline_data_to_extents() attempts to zero out the whole cluster allocated for file data by grabbing, zeroing, and dirtying all pages covering this cluster. However these pages are beyond i_size, thus writeback code generally ignores these dirty pages and no blocks were ever actually zeroed on the disk. This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero pages past i_size.") for standard ocfs2 write path, inline conversion path was apparently forgotten; the commit log also has a reasoning why the zeroing actually is not needed. After commit 6dbf7bb55598, things became worse as writeback code stopped invalidating buffers on pages beyond i_size and thus these pages end up with clean PageDirty bit but with buffers attached to these pages being still dirty. So when a file is converted from inline format, then writeback triggers, and then the file is grown so that these pages become valid, the invalid dirtiness state is preserved, mark_buffer_dirty() does nothing on these pages (buffers are already dirty) but page is never written back because it is clean. So data written to these pages is lost once pages are reclaimed. Simple reproducer for the problem is: xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \ -c "pwrite 4000 2000" ocfs2_file After unmounting and mounting the fs again, you can observe that end of 'ocfs2_file' has lost its contents. Fix the problem by not doing the pointless zeroing during conversion from inline format similarly as in the standard write path. [akpm@linux-foundation.org: fix whitespace, per Joseph]

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: ep0: fix NULL pointer exception There is no validation of the index from dwc3_wIndex_to_dep() and we might be referring a non-existing ep and trigger a NULL pointer exception. In certain configurations we might use fewer eps and the index might wrongly indicate a larger ep index than existing. By adding this validation from the patch we can actually report a wrong index back to the caller. In our usecase we are using a composite device on an older kernel, but upstream might use this fix also. Unfortunately, I cannot describe the hardware for others to reproduce the issue as it is a proprietary implementation. [ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4 [ 82.966891] Mem abort info: [ 82.969663] ESR = 0x96000006 [ 82.972703] Exception class = DABT (current EL), IL = 32 bits [ 82.978603] SET = 0, FnV = 0 [ 82.981642] EA = 0, S1PTW = 0 [ 82.984765] Data abort info: [ 82.987631] ISV = 0, ISS = 0x00000006 [ 82.991449] CM = 0, WnR = 0 [ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc [ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000 [ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c) [ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1 [ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c [ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94 ... [ 83.141788] Call trace: [ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c [ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94 [ 83.181546] ---[ end trace aac6b5267d84c32f ]---

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Return CQE error if invalid lkey was supplied RXE is missing update of WQE status in LOCAL_WRITE failures. This caused the following kernel panic if someone sent an atomic operation with an explicitly wrong lkey. [leonro@vm ~]$ mkt test test_atomic_invalid_lkey (tests.test_atomic.AtomicTest) ... WARNING: CPU: 5 PID: 263 at drivers/infiniband/sw/rxe/rxe_comp.c:740 rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Modules linked in: crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel rdma_ucm rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core ptp pps_core CPU: 5 PID: 263 Comm: python3 Not tainted 5.13.0-rc1+ #2936 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Code: 03 0f 8e 65 0e 00 00 3b 93 10 06 00 00 0f 84 82 0a 00 00 4c 89 ff 4c 89 44 24 38 e8 2d 74 a9 e1 4c 8b 44 24 38 e9 1c f5 ff ff <0f> 0b e9 0c e8 ff ff b8 05 00 00 00 41 bf 05 00 00 00 e9 ab e7 ff RSP: 0018:ffff8880158af090 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888016a78000 RCX: ffffffffa0cf1652 RDX: 1ffff9200004b442 RSI: 0000000000000004 RDI: ffffc9000025a210 RBP: dffffc0000000000 R08: 00000000ffffffea R09: ffff88801617740b R10: ffffed1002c2ee81 R11: 0000000000000007 R12: ffff88800f3b63e8 R13: ffff888016a78008 R14: ffffc9000025a180 R15: 000000000000000c FS: 00007f88b622a740(0000) GS:ffff88806d540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88b5a1fa10 CR3: 000000000d848004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0xb11/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_responder+0x5532/0x7620 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0x9c8/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_requester+0x1efd/0x58c0 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_post_send+0x998/0x1860 [rdma_rxe] ib_uverbs_post_send+0xd5f/0x1220 [ib_uverbs] ib_uverbs_write+0x847/0xc80 [ib_uverbs] vfs_write+0x1c5/0x840 ksys_write+0x176/0x1d0 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Disable Tx queues when reconfiguring the interface The Tx queues were not disabled in situations where the driver needed to stop the interface to apply a new configuration. This could result in a kernel panic when doing any of the 3 following actions: * reconfiguring the number of queues (ethtool -L) * reconfiguring the size of the ring buffers (ethtool -G) * installing/removing an XDP program (ip l set dev ethX xdp) Prevent the panic by making sure netif_tx_disable is called when stopping an interface. Without this patch, the following kernel panic can be observed when doing any of the actions above: Unable to handle kernel paging request at virtual address ffff80001238d040 [....] Call trace: dwmac4_set_addr+0x8/0x10 dev_hard_start_xmit+0xe4/0x1ac sch_direct_xmit+0xe8/0x39c __dev_queue_xmit+0x3ec/0xaf0 dev_queue_xmit+0x14/0x20 [...] [ end trace 0000000000000002 ]---

In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix memory leak in amd_sfh_work Kmemleak tool detected a memory leak in the amd_sfh driver. ==================== unreferenced object 0xffff88810228ada0 (size 32): comm "insmod", pid 3968, jiffies 4295056001 (age 775.792s) hex dump (first 32 bytes): 00 20 73 1f 81 88 ff ff 00 01 00 00 00 00 ad de . s............. 22 01 00 00 00 00 ad de 01 00 02 00 00 00 00 00 "............... backtrace: [<000000007b4c8799>] kmem_cache_alloc_trace+0x163/0x4f0 [<0000000005326893>] amd_sfh_get_report+0xa4/0x1d0 [amd_sfh] [<000000002a9e5ec4>] amdtp_hid_request+0x62/0x80 [amd_sfh] [<00000000b8a95807>] sensor_hub_get_feature+0x145/0x270 [hid_sensor_hub] [<00000000fda054ee>] hid_sensor_parse_common_attributes+0x215/0x460 [hid_sensor_iio_common] [<0000000021279ecf>] hid_accel_3d_probe+0xff/0x4a0 [hid_sensor_accel_3d] [<00000000915760ce>] platform_probe+0x6a/0xd0 [<0000000060258a1f>] really_probe+0x192/0x620 [<00000000fa812f2d>] driver_probe_device+0x14a/0x1d0 [<000000005e79f7fd>] __device_attach_driver+0xbd/0x110 [<0000000070d15018>] bus_for_each_drv+0xfd/0x160 [<0000000013a3c312>] __device_attach+0x18b/0x220 [<000000008c7b4afc>] device_initial_probe+0x13/0x20 [<00000000e6e99665>] bus_probe_device+0xfe/0x120 [<00000000833fa90b>] device_add+0x6a6/0xe00 [<00000000fa901078>] platform_device_add+0x180/0x380 ==================== The fix is to freeing request_list entry once the processed entry is removed from the request_list.

In the Linux kernel, the following vulnerability has been resolved: btrfs: abort in rename_exchange if we fail to insert the second ref Error injection stress uncovered a problem where we'd leave a dangling inode ref if we failed during a rename_exchange. This happens because we insert the inode ref for one side of the rename, and then for the other side. If this second inode ref insert fails we'll leave the first one dangling and leave a corrupt file system behind. Fix this by aborting if we did the insert for the first inode ref.

In the Linux kernel, the following vulnerability has been resolved: drm/meson: fix shutdown crash when component not probed When main component is not probed, by example when the dw-hdmi module is not loaded yet or in probe defer, the following crash appears on shutdown: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 ... pc : meson_drv_shutdown+0x24/0x50 lr : platform_drv_shutdown+0x20/0x30 ... Call trace: meson_drv_shutdown+0x24/0x50 platform_drv_shutdown+0x20/0x30 device_shutdown+0x158/0x360 kernel_restart_prepare+0x38/0x48 kernel_restart+0x18/0x68 __do_sys_reboot+0x224/0x250 __arm64_sys_reboot+0x24/0x30 ... Simply check if the priv struct has been allocated before using it.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume In current code, when a PCI error state pci_channel_io_normal is detectd, it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI driver will continue the execution of PCI resume callback report_resume by pci_walk_bridge, and the callback will go into amdgpu_pci_resume finally, where write lock is releasd unconditionally without acquiring such lock first. In this case, a deadlock will happen when other threads start to acquire the read lock. To fix this, add a member in amdgpu_device strucutre to cache pci_channel_state, and only continue the execution in amdgpu_pci_resume when it's pci_channel_io_frozen.

In the Linux kernel, the following vulnerability has been resolved: binder: make sure fd closes complete During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object cleanup may close 1 or more fds. The close operations are completed using the task work mechanism -- which means the thread needs to return to userspace or the file object may never be dereferenced -- which can lead to hung processes. Force the binder thread back to userspace if an fd is closed during BC_FREE_BUFFER handling.

In the Linux kernel, the following vulnerability has been resolved: ice: track AF_XDP ZC enabled queues in bitmap Commit c7a219048e45 ("ice: Remove xsk_buff_pool from VSI structure") silently introduced a regression and broke the Tx side of AF_XDP in copy mode. xsk_pool on ice_ring is set only based on the existence of the XDP prog on the VSI which in turn picks ice_clean_tx_irq_zc to be executed. That is not something that should happen for copy mode as it should use the regular data path ice_clean_tx_irq. This results in a following splat when xdpsock is run in txonly or l2fwd scenarios in copy mode: <snip> [ 106.050195] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 106.057269] #PF: supervisor read access in kernel mode [ 106.062493] #PF: error_code(0x0000) - not-present page [ 106.067709] PGD 0 P4D 0 [ 106.070293] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 106.074721] CPU: 61 PID: 0 Comm: swapper/61 Not tainted 5.12.0-rc2+ #45 [ 106.081436] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 106.092027] RIP: 0010:xp_raw_get_dma+0x36/0x50 [ 106.096551] Code: 74 14 48 b8 ff ff ff ff ff ff 00 00 48 21 f0 48 c1 ee 30 48 01 c6 48 8b 87 90 00 00 00 48 89 f2 81 e6 ff 0f 00 00 48 c1 ea 0c <48> 8b 04 d0 48 83 e0 fe 48 01 f0 c3 66 66 2e 0f 1f 84 00 00 00 00 [ 106.115588] RSP: 0018:ffffc9000d694e50 EFLAGS: 00010206 [ 106.120893] RAX: 0000000000000000 RBX: ffff88984b8c8a00 RCX: ffff889852581800 [ 106.128137] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff88984cd8b800 [ 106.135383] RBP: ffff888123b50001 R08: ffff889896800000 R09: 0000000000000800 [ 106.142628] R10: 0000000000000000 R11: ffffffff826060c0 R12: 00000000000000ff [ 106.149872] R13: 0000000000000000 R14: 0000000000000040 R15: ffff888123b50018 [ 106.157117] FS: 0000000000000000(0000) GS:ffff8897e0f40000(0000) knlGS:0000000000000000 [ 106.165332] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.171163] CR2: 0000000000000030 CR3: 000000000560a004 CR4: 00000000007706e0 [ 106.178408] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 106.185653] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 106.192898] PKRU: 55555554 [ 106.195653] Call Trace: [ 106.198143] <IRQ> [ 106.200196] ice_clean_tx_irq_zc+0x183/0x2a0 [ice] [ 106.205087] ice_napi_poll+0x3e/0x590 [ice] [ 106.209356] __napi_poll+0x2a/0x160 [ 106.212911] net_rx_action+0xd6/0x200 [ 106.216634] __do_softirq+0xbf/0x29b [ 106.220274] irq_exit_rcu+0x88/0xc0 [ 106.223819] common_interrupt+0x7b/0xa0 [ 106.227719] </IRQ> [ 106.229857] asm_common_interrupt+0x1e/0x40 </snip> Fix this by introducing the bitmap of queues that are zero-copy enabled, where each bit, corresponding to a queue id that xsk pool is being configured on, will be set/cleared within ice_xsk_pool_{en,dis}able and checked within ice_xsk_pool(). The latter is a function used for deciding which napi poll routine is executed. Idea is being taken from our other drivers such as i40e and ixgbe.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Update error handler for UCTX and UMEM In the fast unload flow, the device state is set to internal error, which indicates that the driver started the destroy process. In this case, when a destroy command is being executed, it should return MLX5_CMD_STAT_OK. Fix MLX5_CMD_OP_DESTROY_UCTX and MLX5_CMD_OP_DESTROY_UMEM to return OK instead of EIO. This fixes a call trace in the umem release process - [ 2633.536695] Call Trace: [ 2633.537518] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] [ 2633.538596] remove_client_context+0x8b/0xd0 [ib_core] [ 2633.539641] disable_device+0x8c/0x130 [ib_core] [ 2633.540615] __ib_unregister_device+0x35/0xa0 [ib_core] [ 2633.541640] ib_unregister_device+0x21/0x30 [ib_core] [ 2633.542663] __mlx5_ib_remove+0x38/0x90 [mlx5_ib] [ 2633.543640] auxiliary_bus_remove+0x1e/0x30 [auxiliary] [ 2633.544661] device_release_driver_internal+0x103/0x1f0 [ 2633.545679] bus_remove_device+0xf7/0x170 [ 2633.546640] device_del+0x181/0x410 [ 2633.547606] mlx5_rescan_drivers_locked.part.10+0x63/0x160 [mlx5_core] [ 2633.548777] mlx5_unregister_device+0x27/0x40 [mlx5_core] [ 2633.549841] mlx5_uninit_one+0x21/0xc0 [mlx5_core] [ 2633.550864] remove_one+0x69/0xe0 [mlx5_core] [ 2633.551819] pci_device_remove+0x3b/0xc0 [ 2633.552731] device_release_driver_internal+0x103/0x1f0 [ 2633.553746] unbind_store+0xf6/0x130 [ 2633.554657] kernfs_fop_write+0x116/0x190 [ 2633.555567] vfs_write+0xa5/0x1a0 [ 2633.556407] ksys_write+0x4f/0xb0 [ 2633.557233] do_syscall_64+0x5b/0x1a0 [ 2633.558071] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 2633.559018] RIP: 0033:0x7f9977132648 [ 2633.559821] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 55 6f 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55 [ 2633.562332] RSP: 002b:00007fffb1a83888 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2633.563472] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f9977132648 [ 2633.564541] RDX: 000000000000000c RSI: 000055b90546e230 RDI: 0000000000000001 [ 2633.565596] RBP: 000055b90546e230 R08: 00007f9977406860 R09: 00007f9977a54740 [ 2633.566653] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f99774056e0 [ 2633.567692] R13: 000000000000000c R14: 00007f9977400880 R15: 000000000000000c [ 2633.568725] ---[ end trace 10b4fe52945e544d ]---

In the Linux kernel, the following vulnerability has been resolved: net_sched: fix NULL deref in fifo_set_limit() syzbot reported another NULL deref in fifo_set_limit() [1] I could repro the issue with : unshare -n tc qd add dev lo root handle 1:0 tbf limit 200000 burst 70000 rate 100Mbit tc qd replace dev lo parent 1:0 pfifo_fast tc qd change dev lo root handle 1:0 tbf limit 300000 burst 70000 rate 100Mbit pfifo_fast does not have a change() operation. Make fifo_set_limit() more robust about this. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 1cf99067 P4D 1cf99067 PUD 7ca49067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 1 PID: 14443 Comm: syz-executor959 Not tainted 5.15.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffffc9000e2f7310 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffffff8d6ecc00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888024c27910 RDI: ffff888071e34000 RBP: ffff888071e34000 R08: 0000000000000001 R09: ffffffff8fcfb947 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888024c27910 R13: ffff888071e34018 R14: 0000000000000000 R15: ffff88801ef74800 FS: 00007f321d897700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000722c3000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: fifo_set_limit net/sched/sch_fifo.c:242 [inline] fifo_set_limit+0x198/0x210 net/sched/sch_fifo.c:227 tbf_change+0x6ec/0x16d0 net/sched/sch_tbf.c:418 qdisc_change net/sched/sch_api.c:1332 [inline] tc_modify_qdisc+0xd9a/0x1a60 net/sched/sch_api.c:1634 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: mptcp: never allow the PM to close a listener subflow Currently, when deleting an endpoint the netlink PM treverses all the local MPTCP sockets, regardless of their status. If an MPTCP listener socket is bound to the IP matching the delete endpoint, the listener TCP socket will be closed. That is unexpected, the PM should only affect data subflows. Additionally, syzbot was able to trigger a NULL ptr dereference due to the above: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 6550 Comm: syz-executor122 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xd7d/0x54a0 kernel/locking/lockdep.c:4897 Code: 0f 0e 41 be 01 00 00 00 0f 86 c8 00 00 00 89 05 69 cc 0f 0e e9 bd 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85 f3 2f 00 00 48 81 3b 20 75 17 8f 0f 84 52 f3 ff RSP: 0018:ffffc90001f2f818 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000a R12: 0000000000000000 R13: ffff88801b98d700 R14: 0000000000000000 R15: 0000000000000001 FS: 00007f177cd3d700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f177cd1b268 CR3: 000000001dd55000 CR4: 0000000000350ee0 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5602 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x39/0x50 kernel/locking/spinlock.c:162 finish_wait+0xc0/0x270 kernel/sched/wait.c:400 inet_csk_wait_for_connect net/ipv4/inet_connection_sock.c:464 [inline] inet_csk_accept+0x7de/0x9d0 net/ipv4/inet_connection_sock.c:497 mptcp_accept+0xe5/0x500 net/mptcp/protocol.c:2865 inet_accept+0xe4/0x7b0 net/ipv4/af_inet.c:739 mptcp_stream_accept+0x2e7/0x10e0 net/mptcp/protocol.c:3345 do_accept+0x382/0x510 net/socket.c:1773 __sys_accept4_file+0x7e/0xe0 net/socket.c:1816 __sys_accept4+0xb0/0x100 net/socket.c:1846 __do_sys_accept net/socket.c:1864 [inline] __se_sys_accept net/socket.c:1861 [inline] __x64_sys_accept+0x71/0xb0 net/socket.c:1861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f177cd8b8e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f177cd3d308 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007f177ce13408 RCX: 00007f177cd8b8e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f177ce13400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f177ce1340c R13: 00007f177cde1004 R14: 6d705f706374706d R15: 0000000000022000 </TASK> Fix the issue explicitly skipping MPTCP socket in TCP_LISTEN status.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix potential memory leak on unlikely error case If skb_linearize is needed and fails we could leak a msg on the error handling. To fix ensure we kfree the msg block before returning error. Found during code review.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix possible stall on recvmsg() recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential memory leak in DMUB hw_init [Why] On resume we perform DMUB hw_init which allocates memory: dm_resume->dm_dmub_hw_init->dc_dmub_srv_create->kzalloc That results in memory leak in suspend/resume scenarios. [How] Allocate memory for the DC wrapper to DMUB only if it was not allocated before. No need to reallocate it on suspend/resume.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not BUG_ON in link_to_fixup_dir While doing error injection testing I got the following panic kernel BUG at fs/btrfs/tree-log.c:1862! invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:link_to_fixup_dir+0xd5/0xe0 RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216 RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0 RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000 RBP: ffff8f5953af9450 R08: 0000000000000019 R09: 0000000000000001 R10: 000151f408682970 R11: 0000000120021001 R12: ffff8f5954978800 R13: ffff8f595287faf0 R14: ffff8f5953c77dd0 R15: 0000000000000065 FS: 00007fc5284c8c40(0000) GS:ffff8f59bbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc5287f47c0 CR3: 000000011275e002 CR4: 0000000000370ee0 Call Trace: replay_one_buffer+0x409/0x470 ? btree_read_extent_buffer_pages+0xd0/0x110 walk_up_log_tree+0x157/0x1e0 walk_log_tree+0xa6/0x1d0 btrfs_recover_log_trees+0x1da/0x360 ? replay_one_extent+0x7b0/0x7b0 open_ctree+0x1486/0x1720 btrfs_mount_root.cold+0x12/0xea ? __kmalloc_track_caller+0x12f/0x240 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? vfs_parse_fs_string+0x4d/0x90 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 path_mount+0x433/0xa10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae We can get -EIO or any number of legitimate errors from btrfs_search_slot(), panicing here is not the appropriate response. The error path for this code handles errors properly, simply return the error.

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: fix program check interrupt emergency stack path Emergency stack path was jumping into a 3: label inside the __GEN_COMMON_BODY macro for the normal path after it had finished, rather than jumping over it. By a small miracle this is the correct place to build up a new interrupt frame with the existing stack pointer, so things basically worked okay with an added weird looking 700 trap frame on top (which had the wrong ->nip so it didn't decode bug messages either). Fix this by avoiding using numeric labels when jumping over non-trivial macros. Before: LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: sh Not tainted 5.15.0-rc2-00034-ge057cdade6e5 #2637 NIP: 7265677368657265 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3a50 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 00000700 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 c0000000fffb3cf0 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [7265677368657265] 0x7265677368657265 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 Call Trace: [c0000000fffb3cf0] [c00000000000bdac] soft_nmi_common+0x13c/0x1d0 (unreliable) --- interrupt: 700 at decrementer_common_virt+0xb8/0x230 NIP: c0000000000098b8 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 22424282 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 0000000000002400 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 --- interrupt: 700 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 6d28218e0cc3c949 ]--- After: ------------[ cut here ]------------ kernel BUG at arch/powerpc/kernel/exceptions-64s.S:491! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: login Not tainted 5.15.0-rc2-00034-ge057cdade6e5-dirty #2638 NIP: c0000000000098b8 LR: c00000000006bf04 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 24482227 XER: 00040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006bf04 0000000000002400 c000000001513800 c000000001271868 GPR04: 00000000100f0d29 0000000042000000 0000000000000007 0000000000000009 GPR08: 00000000100f0d29 0000000024482227 0000000000002710 c000000000181b3c GPR12: 9000000000009033 c0000000016b0000 00000000100f0d29 c000000005b22f00 GPR16: 00000000ffff0000 0000000000000001 0000000000000009 00000000100eed90 GPR20: 00000000100eed90 00000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: fix NULL-deref on disconnect Commit 9d7b18668956 ("HID: magicmouse: add support for Apple Magic Trackpad 2") added a sanity check for an Apple trackpad but returned success instead of -ENODEV when the check failed. This means that the remove callback will dereference the never-initialised driver data pointer when the driver is later unbound (e.g. on USB disconnect).

In the Linux kernel, the following vulnerability has been resolved: net: hns3: do not allow call hns3_nic_net_open repeatedly hns3_nic_net_open() is not allowed to called repeatly, but there is no checking for this. When doing device reset and setup tc concurrently, there is a small oppotunity to call hns3_nic_net_open repeatedly, and cause kernel bug by calling napi_enable twice. The calltrace information is like below: [ 3078.222780] ------------[ cut here ]------------ [ 3078.230255] kernel BUG at net/core/dev.c:6991! [ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1 [ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021 [ 3078.276801] Workqueue: hclge hclge_service_task [hclge] [ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 3078.296168] pc : napi_enable+0x80/0x84 tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3] [ 3078.314771] sp : ffff8000108abb20 [ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300 [ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000 [ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880 [ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000 [ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930 [ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4 [ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8 [ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344 [ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938 [ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0 [ 3078.414657] Call trace: [ 3078.418517] napi_enable+0x80/0x84 [ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3] [ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3] [ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge] [ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge] [ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge] [ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge] [ 3078.475675] process_one_work+0x1dc/0x48c [ 3078.481888] worker_thread+0x15c/0x464 [ 3078.487104] kthread+0x160/0x170 [ 3078.492479] ret_from_fork+0x10/0x18 [ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000) [ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]--- Once hns3_nic_net_open() is excute success, the flag HNS3_NIC_STATE_DOWN will be cleared. So add checking for this flag, directly return when HNS3_NIC_STATE_DOWN is no set.

In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: make sure wait for page writeback in memory_failure Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in clear_inode: kernel BUG at fs/inode.c:519! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7) CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_inode+0x280/0x2a8 lr : clear_inode+0x280/0x2a8 Call trace: clear_inode+0x280/0x2a8 ext4_clear_inode+0x38/0xe8 ext4_free_inode+0x130/0xc68 ext4_evict_inode+0xb20/0xcb8 evict+0x1a8/0x3c0 iput+0x344/0x460 do_unlinkat+0x260/0x410 __arm64_sys_unlinkat+0x6c/0xc0 el0_svc_common+0xdc/0x3b0 el0_svc_handler+0xf8/0x160 el0_svc+0x10/0x218 Kernel panic - not syncing: Fatal exception A crash dump of this problem show that someone called __munlock_pagevec to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap -> munlock_vma_pages_range -> __munlock_pagevec. As a result memory_failure will call identify_page_state without wait_on_page_writeback. And after truncate_error_page clear the mapping of this page. end_page_writeback won't call sb_clear_inode_writeback to clear inode->i_wb_list. That will trigger BUG_ON in clear_inode! Fix it by checking PageWriteback too to help determine should we skip wait_on_page_writeback.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() Commit de144ff4234f changes _pnfs_return_layout() to call pnfs_mark_matching_lsegs_return() passing NULL as the struct pnfs_layout_range argument. Unfortunately, pnfs_mark_matching_lsegs_return() doesn't check if we have a value here before dereferencing it, causing an oops. I'm able to hit this crash consistently when running connectathon basic tests on NFS v4.1/v4.2 against Ontap.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled When only PHY1 is used (for example on Odroid-HC4), the regmap init code uses the usb2 ports when doesn't initialize the PHY1 regmap entry. This fixes: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... pc : regmap_update_bits_base+0x40/0xa0 lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 ... Call trace: regmap_update_bits_base+0x40/0xa0 dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 dwc3_meson_g12a_usb2_init+0x7c/0xc8 dwc3_meson_g12a_usb_init+0x28/0x48 dwc3_meson_g12a_probe+0x298/0x540 platform_probe+0x70/0xe0 really_probe+0xf0/0x4d8 driver_probe_device+0xfc/0x168 ...

In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Avoid smp_processor_id() in preemptible code The BUG message "BUG: using smp_processor_id() in preemptible [00000000] code" was observed for TCMU devices with kernel config DEBUG_PREEMPT. The message was observed when blktests block/005 was run on TCMU devices with fileio backend or user:zbc backend [1]. The commit 1130b499b4a7 ("scsi: target: tcm_loop: Use LIO wq cmd submission helper") triggered the symptom. The commit modified work queue to handle commands and changed 'current->nr_cpu_allowed' at smp_processor_id() call. The message was also observed at system shutdown when TCMU devices were not cleaned up [2]. The function smp_processor_id() was called in SCSI host work queue for abort handling, and triggered the BUG message. This symptom was observed regardless of the commit 1130b499b4a7 ("scsi: target: tcm_loop: Use LIO wq cmd submission helper"). To avoid the preemptible code check at smp_processor_id(), get CPU ID with raw_smp_processor_id() instead. The CPU ID is used for performance improvement then thread move to other CPU will not affect the code. [1] [ 56.468103] run blktests block/005 at 2021-05-12 14:16:38 [ 57.369473] check_preemption_disabled: 85 callbacks suppressed [ 57.369480] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1511 [ 57.369506] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1510 [ 57.369512] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1506 [ 57.369552] caller is __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369606] CPU: 4 PID: 1506 Comm: fio Not tainted 5.13.0-rc1+ #34 [ 57.369613] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 57.369617] Call Trace: [ 57.369621] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1507 [ 57.369628] dump_stack+0x6d/0x89 [ 57.369642] check_preemption_disabled+0xc8/0xd0 [ 57.369628] caller is __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369655] __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369695] target_init_cmd+0x76/0x90 [target_core_mod] [ 57.369732] tcm_loop_queuecommand+0x109/0x210 [tcm_loop] [ 57.369744] scsi_queue_rq+0x38e/0xc40 [ 57.369761] __blk_mq_try_issue_directly+0x109/0x1c0 [ 57.369779] blk_mq_try_issue_directly+0x43/0x90 [ 57.369790] blk_mq_submit_bio+0x4e5/0x5d0 [ 57.369812] submit_bio_noacct+0x46e/0x4e0 [ 57.369830] __blkdev_direct_IO_simple+0x1a3/0x2d0 [ 57.369859] ? set_init_blocksize.isra.0+0x60/0x60 [ 57.369880] generic_file_read_iter+0x89/0x160 [ 57.369898] blkdev_read_iter+0x44/0x60 [ 57.369906] new_sync_read+0x102/0x170 [ 57.369929] vfs_read+0xd4/0x160 [ 57.369941] __x64_sys_pread64+0x6e/0xa0 [ 57.369946] ? lockdep_hardirqs_on+0x79/0x100 [ 57.369958] do_syscall_64+0x3a/0x70 [ 57.369965] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 57.369973] RIP: 0033:0x7f7ed4c1399f [ 57.369979] Code: 08 89 3c 24 48 89 4c 24 18 e8 7d f3 ff ff 4c 8b 54 24 18 48 8b 54 24 10 41 89 c0 48 8b 74 24 08 8b 3c 24 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 04 24 e8 cd f3 ff ff 48 8b [ 57.369983] RSP: 002b:00007ffd7918c580 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 [ 57.369990] RAX: ffffffffffffffda RBX: 00000000015b4540 RCX: 00007f7ed4c1399f [ 57.369993] RDX: 0000000000001000 RSI: 00000000015de000 RDI: 0000000000000009 [ 57.369996] RBP: 00000000015b4540 R08: 0000000000000000 R09: 0000000000000001 [ 57.369999] R10: 0000000000e5c000 R11: 0000000000000293 R12: 00007f7eb5269a70 [ 57.370002] R13: 0000000000000000 R14: 0000000000001000 R15: 00000000015b4568 [ 57.370031] CPU: 7 PID: 1507 Comm: fio Not tainted 5.13.0-rc1+ #34 [ 57.370036] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 57.370039] Call Trace: [ 57.370045] dump_stack+0x6d/0x89 [ 57.370056] ch ---truncated---

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix host stage-2 PGD refcount The KVM page-table library refcounts the pages of concatenated stage-2 PGDs individually. However, when running KVM in protected mode, the host's stage-2 PGD is currently managed by EL2 as a single high-order compound page, which can cause the refcount of the tail pages to reach 0 when they shouldn't, hence corrupting the page-table. Fix this by introducing a new hyp_split_page() helper in the EL2 page allocator (matching the kernel's split_page() function), and make use of it from host_s2_zalloc_pages_exact().

In the Linux kernel, the following vulnerability has been resolved: net:sfc: fix non-freed irq in legacy irq mode SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed...

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in ip_mc_add1_src BUG: memory leak unreferenced object 0xffff888101bc4c00 (size 32): comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................ backtrace: [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline] [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline] [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline] [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095 [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416 [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline] [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423 [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857 [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117 [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline] [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline] [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125 [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47 [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In commit 24803f38a5c0 ("igmp: do not remove igmp souce list info when set link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed, because it was also called in igmpv3_clear_delrec(). Rough callgraph: inetdev_destroy -> ip_mc_destroy_dev -> igmpv3_clear_delrec -> ip_mc_clear_src -> RCU_INIT_POINTER(dev->ip_ptr, NULL) However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through inetdev_by_index() and then in_dev->mc_list->sources cannot be released by ip_mc_del1_src() in the sock_close. Rough call sequence goes like: sock_close -> __sock_release -> inet_release -> ip_mc_drop_socket -> inetdev_by_index -> ip_mc_leave_src -> ip_mc_del_src -> ip_mc_del1_src So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free in_dev->mc_list->sources.

In the Linux kernel, the following vulnerability has been resolved: dm btree remove: assign new_root only when removal succeeds remove_raw() in dm_btree_remove() may fail due to IO read error (e.g. read the content of origin block fails during shadowing), and the value of shadow_spine::root is uninitialized, but the uninitialized value is still assign to new_root in the end of dm_btree_remove(). For dm-thin, the value of pmd->details_root or pmd->root will become an uninitialized value, so if trying to read details_info tree again out-of-bound memory may occur as showed below: general protection fault, probably for non-canonical address 0x3fdcb14c8d7520 CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6 Hardware name: QEMU Standard PC RIP: 0010:metadata_ll_load_ie+0x14/0x30 Call Trace: sm_metadata_count_is_more_than_one+0xb9/0xe0 dm_tm_shadow_block+0x52/0x1c0 shadow_step+0x59/0xf0 remove_raw+0xb2/0x170 dm_btree_remove+0xf4/0x1c0 dm_pool_delete_thin_device+0xc3/0x140 pool_message+0x218/0x2b0 target_message+0x251/0x290 ctl_ioctl+0x1c4/0x4d0 dm_ctl_ioctl+0xe/0x20 __x64_sys_ioctl+0x7b/0xb0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixing it by only assign new_root when removal succeeds

In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: clear BM pool before initialization Register value persist after booting the kernel using kexec which results in kernel panic. Thus clear the BM pool registers before initialisation to fix the issue.

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: efi/fdt: fix panic when no valid fdt found setup_arch() would invoke efi_init()->efi_get_fdt_params(). If no valid fdt found then initial_boot_params will be null. So we should stop further fdt processing here. I encountered this issue on risc-v.

In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: bcm-voter: add a missing of_node_put() Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak.

In the Linux kernel, the following vulnerability has been resolved: driver core: fix potential null-ptr-deref in device_add() I got the following null-ptr-deref report while doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 CPU: 2 PID: 278 Comm: 37-i2c-ds2482 Tainted: G B W N 6.1.0-rc3+ RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x196/0x210 bus_remove_device+0x1bd/0x240 device_add+0xd3d/0x1100 w1_add_master_device+0x476/0x490 [wire] ds2482_probe+0x303/0x3e0 [ds2482] This is how it happened: w1_alloc_dev() // The dev->driver is set to w1_master_driver. memcpy(&dev->dev, device, sizeof(struct device)); device_add() bus_add_device() dpm_sysfs_add() // It fails, calls bus_remove_device. // error path bus_remove_device() // The dev->driver is not null, but driver is not bound. __device_release_driver() klist_remove(&dev->p->knode_driver) <-- It causes null-ptr-deref. // normal path bus_probe_device() // It's not called yet. device_bind_driver() If dev->driver is set, in the error path after calling bus_add_device() in device_add(), bus_remove_device() is called, then the device will be detached from driver. But device_bind_driver() is not called yet, so it causes null-ptr-deref while access the 'knode_driver'. To fix this, set dev->driver to null in the error path before calling bus_remove_device().

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: add error handling in sja1105_setup() If any of sja1105_static_config_load(), sja1105_clocking_setup() or sja1105_devlink_setup() fails, we can't just return in the middle of sja1105_setup() or memory will leak. Add a cleanup path.

In the Linux kernel, the following vulnerability has been resolved: usb: common: usb-conn-gpio: fix NULL pointer dereference of charger When power on system with OTG cable, IDDIG's interrupt arises before the charger registration, it will cause a NULL pointer dereference, fix the issue by registering the power supply before requesting IDDIG/VBUS irq.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix kernel pointer leak Pointers should be printed with %p or %px rather than cast to 'unsigned long long' and printed with %llx. Change %llx to %p to print the secured pointer.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereference on pointer edp The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check")

In the Linux kernel, the following vulnerability has been resolved: NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() 'params' is allocated in digital_tg_listen_mdaa(), but not free when digital_send_cmd() failed, which will cause memory leak. Fix it by freeing 'params' if digital_send_cmd() return failed.

In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: do not decrement idle task preempt count in CPU offline With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we get: BUG: scheduling while atomic: swapper/1/0/0x00000000 no locks held by swapper/1/0. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100 Call Trace: dump_stack_lvl+0xac/0x108 __schedule_bug+0xac/0xe0 __schedule+0xcf8/0x10d0 schedule_idle+0x3c/0x70 do_idle+0x2d8/0x4a0 cpu_startup_entry+0x38/0x40 start_secondary+0x2ec/0x3a0 start_secondary_prolog+0x10/0x14 This is because powerpc's arch_cpu_idle_dead() decrements the idle task's preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc: Re-enable preemption before cpu_die()"), specifically "start_secondary() expects a preempt_count() of 0." However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled"), that justification no longer holds. The idle task isn't supposed to re-enable preemption, so remove the vestigial preempt_enable() from the CPU offline path. Tested with pseries and powernv in qemu, and pseries on PowerVM.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: Remove WARN_ON in tps6598x_block_read Calling tps6598x_block_read with a higher than allowed len can be handled by just returning an error. There's no need to crash systems with panic-on-warn enabled.

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix NULL pointer dereferencing in smc_vlan_by_tcpsk() Coverity reports a possible NULL dereferencing problem: in smc_vlan_by_tcpsk(): 6. returned_null: netdev_lower_get_next returns NULL (checked 29 out of 30 times). 7. var_assigned: Assigning: ndev = NULL return value from netdev_lower_get_next. 1623 ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower); CID 1468509 (#1 of 1): Dereference null return value (NULL_RETURNS) 8. dereference: Dereferencing a pointer that might be NULL ndev when calling is_vlan_dev. 1624 if (is_vlan_dev(ndev)) { Remove the manual implementation and use netdev_walk_all_lower_dev() to iterate over the lower devices. While on it remove an obsolete function parameter comment.

In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - Fix memory leak of pad It appears there are several failure return paths that don't seem to be free'ing pad. Fix these. Addresses-Coverity: ("Resource leak")