In the Linux kernel, the following vulnerability has been resolved: sctp: Fix null-ptr-deref in reuseport_add_sock(). syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in reuseport_add_sock(). [0] The repro first creates a listener with SO_REUSEPORT. Then, it creates another listener on the same port and concurrently closes the first listener. The second listen() calls reuseport_add_sock() with the first listener as sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently, but the close() does clear it by reuseport_detach_sock(). The problem is SCTP does not properly synchronise reuseport_alloc(), reuseport_add_sock(), and reuseport_detach_sock(). The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must provide synchronisation for sockets that are classified into the same reuseport group. Otherwise, such sockets form multiple identical reuseport groups, and all groups except one would be silently dead. 1. Two sockets call listen() concurrently 2. No socket in the same group found in sctp_ep_hashtable[] 3. Two sockets call reuseport_alloc() and form two reuseport groups 4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives incoming packets Also, the reported null-ptr-deref could occur. TCP/UDP guarantees that would not happen by holding the hash bucket lock. Let's apply the locking strategy to __sctp_hash_endpoint() and __sctp_unhash_endpoint(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350 Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14 RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012 RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385 R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0 R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __sctp_hash_endpoint net/sctp/input.c:762 [inline] sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790 sctp_listen_start net/sctp/socket.c:8570 [inline] sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625 __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] __se_sys_listen net/socket.c:1900 [inline] __x64_sys_listen+0x5a/0x70 net/socket.c:1900 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f24e46039b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9 RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004 RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0 R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c R13: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: free reset-work-item when flushing Fix a tiny memory leak when flushing the reset work queue.

In the Linux kernel, the following vulnerability has been resolved: PM: core: keep irq flags in device_pm_check_callbacks() The function device_pm_check_callbacks() can be called under the spin lock (in the reported case it happens from genpd_add_device() -> dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes. However this function uncoditionally uses spin_lock_irq() / spin_unlock_irq(), thus not preserving the CPU flags. Use the irqsave/irqrestore instead. The backtrace for the reference: [ 2.752010] ------------[ cut here ]------------ [ 2.756769] raw_local_irq_restore() called with IRQs enabled [ 2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50 [ 2.772338] Modules linked in: [ 2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S 5.17.0-rc6-00384-ge330d0d82eff-dirty #684 [ 2.781384] Freeing initrd memory: 46024K [ 2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.785841] pc : warn_bogus_irq_restore+0x34/0x50 [ 2.785844] lr : warn_bogus_irq_restore+0x34/0x50 [ 2.785846] sp : ffff80000805b7d0 [ 2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002 [ 2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800 [ 2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00 [ 2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff [ 2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7 [ 2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8 [ 2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0 [ 2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0 [ 2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000 [ 2.889774] Call trace: [ 2.892290] warn_bogus_irq_restore+0x34/0x50 [ 2.896770] _raw_spin_unlock_irqrestore+0x94/0xa0 [ 2.901690] genpd_unlock_spin+0x20/0x30 [ 2.905724] genpd_add_device+0x100/0x2d0 [ 2.909850] __genpd_dev_pm_attach+0xa8/0x23c [ 2.914329] genpd_dev_pm_attach_by_id+0xc4/0x190 [ 2.919167] genpd_dev_pm_attach_by_name+0x3c/0xd0 [ 2.924086] dev_pm_domain_attach_by_name+0x24/0x30 [ 2.929102] psci_dt_attach_cpu+0x24/0x90 [ 2.933230] psci_cpuidle_probe+0x2d4/0x46c [ 2.937534] platform_probe+0x68/0xe0 [ 2.941304] really_probe.part.0+0x9c/0x2fc [ 2.945605] __driver_probe_device+0x98/0x144 [ 2.950085] driver_probe_device+0x44/0x15c [ 2.954385] __device_attach_driver+0xb8/0x120 [ 2.958950] bus_for_each_drv+0x78/0xd0 [ 2.962896] __device_attach+0xd8/0x180 [ 2.966843] device_initial_probe+0x14/0x20 [ 2.971144] bus_probe_device+0x9c/0xa4 [ 2.975092] device_add+0x380/0x88c [ 2.978679] platform_device_add+0x114/0x234 [ 2.983067] platform_device_register_full+0x100/0x190 [ 2.988344] psci_idle_init+0x6c/0xb0 [ 2.992113] do_one_initcall+0x74/0x3a0 [ 2.996060] kernel_init_freeable+0x2fc/0x384 [ 3.000543] kernel_init+0x28/0x130 [ 3.004132] ret_from_fork+0x10/0x20 [ 3.007817] irq event stamp: 319826 [ 3.011404] hardirqs last enabled at (319825): [<ffffd40e7eda0268>] __up_console_sem+0x78/0x84 [ 3.020332] hardirqs last disabled at (319826): [<ffffd40e7fd6d9d8>] el1_dbg+0x24/0x8c [ 3.028458] softirqs last enabled at (318312): [<ffffd40e7ec90410>] _stext+0x410/0x588 [ 3.036678] softirqs last disabled at (318299): [<ffffd40e7ed1bf68>] __irq_exit_rcu+0x158/0x174 [ 3.045607] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: btrfs: add the missing error handling inside get_canonical_dev_path Inside function get_canonical_dev_path(), we call d_path() to get the final device path. But d_path() can return error, and in that case the next strscpy() call will trigger an invalid memory access. Add back the missing error handling for d_path().

In the Linux kernel, the following vulnerability has been resolved: bpf: avoid holding freeze_mutex during mmap operation We use map->freeze_mutex to prevent races between map_freeze() and memory mapping BPF map contents with writable permissions. The way we naively do this means we'll hold freeze_mutex for entire duration of all the mm and VMA manipulations, which is completely unnecessary. This can potentially also lead to deadlocks, as reported by syzbot in [0]. So, instead, hold freeze_mutex only during writeability checks, bump (proactively) "write active" count for the map, unlock the mutex and proceed with mmap logic. And only if something went wrong during mmap logic, then undo that "write active" counter increment. [0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/

In the Linux kernel, the following vulnerability has been resolved: staging: gpib: Fix Oops after disconnect in agilent usb If the agilent usb dongle is disconnected subsequent calls to the driver cause a NULL dereference Oops as the bus_interface is set to NULL on disconnect. This problem was introduced by setting usb_dev from the bus_interface for dev_xxx messages. Previously bus_interface was checked for NULL only in the functions directly calling usb_fill_bulk_urb or usb_control_msg. Check for valid bus_interface on all interface entry points and return -ENODEV if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: regulator: of: Fix refcount leak bug in of_get_regulation_constraints() We should call the of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params Null pointer dereference issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not null before accessing. This prevents a null pointer dereference. Found by code review. (cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092)

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix possible memory leak in btrfs_get_dev_args_from_path() In btrfs_get_dev_args_from_path(), btrfs_get_bdev_and_sb() can fail if the path is invalid. In this case, btrfs_get_dev_args_from_path() returns directly without freeing args->uuid and args->fsid allocated before, which causes memory leak. To fix these possible leaks, when btrfs_get_bdev_and_sb() fails, btrfs_put_dev_args_from_path() is called to clean up the memory.

In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace Call kvm_init() only after _all_ setup is complete, as kvm_init() exposes /dev/kvm to userspace and thus allows userspace to create VMs (and call other ioctls). E.g. KVM will encounter a NULL pointer when attempting to add a vCPU to the per-CPU loaded_vmcss_on_cpu list if userspace is able to create a VM before vmx_init() configures said list. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP CPU: 6 PID: 1143 Comm: stable Not tainted 6.0.0-rc7+ #988 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:vmx_vcpu_load_vmcs+0x68/0x230 [kvm_intel] <TASK> vmx_vcpu_load+0x16/0x60 [kvm_intel] kvm_arch_vcpu_load+0x32/0x1f0 [kvm] vcpu_load+0x2f/0x40 [kvm] kvm_arch_vcpu_create+0x231/0x310 [kvm] kvm_vm_ioctl+0x79f/0xe10 [kvm] ? handle_mm_fault+0xb1/0x220 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f5a6b05743b </TASK> Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel(+) kvm irqbypass

In the Linux kernel, the following vulnerability has been resolved: ovl: support encoding fid from inode with no alias Dmitry Safonov reported that a WARN_ON() assertion can be trigered by userspace when calling inotify_show_fdinfo() for an overlayfs watched inode, whose dentry aliases were discarded with drop_caches. The WARN_ON() assertion in inotify_show_fdinfo() was removed, because it is possible for encoding file handle to fail for other reason, but the impact of failing to encode an overlayfs file handle goes beyond this assertion. As shown in the LTP test case mentioned in the link below, failure to encode an overlayfs file handle from a non-aliased inode also leads to failure to report an fid with FAN_DELETE_SELF fanotify events. As Dmitry notes in his analyzis of the problem, ovl_encode_fh() fails if it cannot find an alias for the inode, but this failure can be fixed. ovl_encode_fh() seldom uses the alias and in the case of non-decodable file handles, as is often the case with fanotify fid info, ovl_encode_fh() never needs to use the alias to encode a file handle. Defer finding an alias until it is actually needed so ovl_encode_fh() will not fail in the common case of FAN_DELETE_SELF fanotify events.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters() On some machines the number of listed CPUs may be bigger than the actual CPUs that exist. The tracing subsystem allocates a per_cpu directory with access to the per CPU ring buffer via a cpuX file. But to save space, the ring buffer will only allocate buffers for online CPUs, even though the CPU array will be as big as the nr_cpu_ids. With the addition of waking waiters on the ring buffer when closing the file, the ring_buffer_wake_waiters() now needs to make sure that the buffer is allocated (with the irq_work allocated with it) before trying to wake waiters, as it will cause a NULL pointer dereference. While debugging this, I added a NULL check for the buffer itself (which is OK to do), and also NULL pointer checks against buffer->buffers (which is not fine, and will WARN) as well as making sure the CPU number passed in is within the nr_cpu_ids (which is also not fine if it isn't). Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1204705

In the Linux kernel, the following vulnerability has been resolved: fbdev: hyperv_fb: Allow graceful removal of framebuffer When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to release the framebuffer forcefully. If this framebuffer is in use it produce the following WARN and hence this framebuffer is never released. [ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40 < snip > [ 44.111289] Call Trace: [ 44.111290] <TASK> [ 44.111291] ? show_regs+0x6c/0x80 [ 44.111295] ? __warn+0x8d/0x150 [ 44.111298] ? framebuffer_release+0x2c/0x40 [ 44.111300] ? report_bug+0x182/0x1b0 [ 44.111303] ? handle_bug+0x6e/0xb0 [ 44.111306] ? exc_invalid_op+0x18/0x80 [ 44.111308] ? asm_exc_invalid_op+0x1b/0x20 [ 44.111311] ? framebuffer_release+0x2c/0x40 [ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb] [ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus] [ 44.111323] device_remove+0x40/0x80 [ 44.111325] device_release_driver_internal+0x20b/0x270 [ 44.111327] ? bus_find_device+0xb3/0xf0 Fix this by moving the release of framebuffer and assosiated memory to fb_ops.fb_destroy function, so that framebuffer framework handles it gracefully. While we fix this, also replace manual registrations/unregistration of framebuffer with devm_register_framebuffer.

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes matching snd_seq_dump_func_t. Adjust this and remove the casts. There are not resulting binary output differences. This was found as a result of Clang's new -Wcast-function-type-strict flag, which is more sensitive than the simpler -Wcast-function-type, which only checks for type width mismatches.

In the Linux kernel, the following vulnerability has been resolved: f2fs: initialize locks earlier in f2fs_fill_super() syzbot is reporting lockdep warning at f2fs_handle_error() [1], for spin_lock(&sbi->error_lock) is called before spin_lock_init() is called. For safe locking in error handling, move initialization of locks (and obvious structures) in f2fs_fill_super() to immediately after memory allocation.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix queue selection for mesh/OCB interfaces When using iTXQ, the code assumes that there is only one vif queue for broadcast packets, using the BE queue. Allowing non-BE queue marking violates that assumption and txq->ac == skb_queue_mapping is no longer guaranteed. This can cause issues with queue handling in the driver and also causes issues with the recent ATF change, resulting in an AQL underflow warning.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix memory leak in vhci_write Syzkaller reports a memory leak as follows: ==================================== BUG: memory leak unreferenced object 0xffff88810d81ac00 (size 240): [...] hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff838733d9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:418 [<ffffffff833f742f>] alloc_skb include/linux/skbuff.h:1257 [inline] [<ffffffff833f742f>] bt_skb_alloc include/net/bluetooth/bluetooth.h:469 [inline] [<ffffffff833f742f>] vhci_get_user drivers/bluetooth/hci_vhci.c:391 [inline] [<ffffffff833f742f>] vhci_write+0x5f/0x230 drivers/bluetooth/hci_vhci.c:511 [<ffffffff815e398d>] call_write_iter include/linux/fs.h:2192 [inline] [<ffffffff815e398d>] new_sync_write fs/read_write.c:491 [inline] [<ffffffff815e398d>] vfs_write+0x42d/0x540 fs/read_write.c:578 [<ffffffff815e3cdd>] ksys_write+0x9d/0x160 fs/read_write.c:631 [<ffffffff845e0645>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845e0645>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd ==================================== HCI core will uses hci_rx_work() to process frame, which is queued to the hdev->rx_q tail in hci_recv_frame() by HCI driver. Yet the problem is that, HCI core may not free the skb after handling ACL data packets. To be more specific, when start fragment does not contain the L2CAP length, HCI core just copies skb into conn->rx_skb and finishes frame process in l2cap_recv_acldata(), without freeing the skb, which triggers the above memory leak. This patch solves it by releasing the relative skb, after processing the above case in l2cap_recv_acldata().

In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix metadata dst->dev xmit null pointer dereference When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace captured via netconsole: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60 Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02 RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80 RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000 R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0 Call Trace: <TASK> xfrmi_xmit+0xde/0x460 ? tcf_bpf_act+0x13d/0x2a0 dev_hard_start_xmit+0x72/0x1e0 __dev_queue_xmit+0x251/0xd30 ip_finish_output2+0x140/0x550 ip_push_pending_frames+0x56/0x80 raw_sendmsg+0x663/0x10a0 ? try_charge_memcg+0x3fd/0x7a0 ? __mod_memcg_lruvec_state+0x93/0x110 ? sock_sendmsg+0x30/0x40 sock_sendmsg+0x30/0x40 __sys_sendto+0xeb/0x130 ? handle_mm_fault+0xae/0x280 ? do_user_addr_fault+0x1e7/0x680 ? kvm_read_and_reset_apf_flags+0x3b/0x50 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff35cac1366 Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366 RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003 RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001 </TASK> Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole] CR2: 00000000000000c0

In the Linux kernel, the following vulnerability has been resolved: tipc: move bc link creation back to tipc_node_create Shuang Li reported a NULL pointer dereference crash: [] BUG: kernel NULL pointer dereference, address: 0000000000000068 [] RIP: 0010:tipc_link_is_up+0x5/0x10 [tipc] [] Call Trace: [] <IRQ> [] tipc_bcast_rcv+0xa2/0x190 [tipc] [] tipc_node_bc_rcv+0x8b/0x200 [tipc] [] tipc_rcv+0x3af/0x5b0 [tipc] [] tipc_udp_recv+0xc7/0x1e0 [tipc] It was caused by the 'l' passed into tipc_bcast_rcv() is NULL. When it creates a node in tipc_node_check_dest(), after inserting the new node into hashtable in tipc_node_create(), it creates the bc link. However, there is a gap between this insert and bc link creation, a bc packet may come in and get the node from the hashtable then try to dereference its bc link, which is NULL. This patch is to fix it by moving the bc link creation before inserting into the hashtable. Note that for a preliminary node becoming "real", the bc link creation should also be called before it's rehashed, as we don't create it for preliminary nodes.

In the Linux kernel, the following vulnerability has been resolved: Input: aiptek - properly check endpoint type Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. There was a check for the number of endpoints, but not for the type of endpoint. Fix it by replacing old desc.bNumEndpoints check with usb_find_common_endpoints() helper for finding endpoints Fail log: usb 5-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: usb_hub_wq hub_event ... Call Trace: <TASK> aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830 input_open_device+0x1bb/0x320 drivers/input/input.c:629 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593

In the Linux kernel, the following vulnerability has been resolved: memory: of: Fix refcount leak bug in of_get_ddr_timings() We should add the of_node_put() when breaking out of for_each_child_of_node() as it will automatically increase and decrease the refcount.

In the Linux kernel, the following vulnerability has been resolved: tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd syzbot got a new report [1] finally pointing to a very old bug, added in initial support for MTU probing. tcp_mtu_probe() has checks about starting an MTU probe if tcp_snd_cwnd(tp) >= 11. But nothing prevents tcp_snd_cwnd(tp) to be reduced later and before the MTU probe succeeds. This bug would lead to potential zero-divides. Debugging added in commit 40570375356c ("tcp: add accessors to read/set tp->snd_cwnd") has paid off :) While we are at it, address potential overflows in this code. [1] WARNING: CPU: 1 PID: 14132 at include/net/tcp.h:1219 tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712 Modules linked in: CPU: 1 PID: 14132 Comm: syz-executor.2 Not tainted 5.18.0-syzkaller-07857-gbabf0bb978e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_snd_cwnd_set include/net/tcp.h:1219 [inline] RIP: 0010:tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712 Code: 74 08 48 89 ef e8 da 80 17 f9 48 8b 45 00 65 48 ff 80 80 03 00 00 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 aa b0 c5 f8 <0f> 0b e9 16 fe ff ff 48 8b 4c 24 08 80 e1 07 38 c1 0f 8c c7 fc ff RSP: 0018:ffffc900079e70f8 EFLAGS: 00010287 RAX: ffffffff88c0f7f6 RBX: ffff8880756e7a80 RCX: 0000000000040000 RDX: ffffc9000c6c4000 RSI: 0000000000031f9e RDI: 0000000000031f9f RBP: 0000000000000000 R08: ffffffff88c0f606 R09: ffffc900079e7520 R10: ffffed101011226d R11: 1ffff1101011226c R12: 1ffff1100eadcf50 R13: ffff8880756e72c0 R14: 1ffff1100eadcf89 R15: dffffc0000000000 FS: 00007f643236e700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1ab3f1e2a0 CR3: 0000000064fe7000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_clean_rtx_queue+0x223a/0x2da0 net/ipv4/tcp_input.c:3356 tcp_ack+0x1962/0x3c90 net/ipv4/tcp_input.c:3861 tcp_rcv_established+0x7c8/0x1ac0 net/ipv4/tcp_input.c:5973 tcp_v6_do_rcv+0x57b/0x1210 net/ipv6/tcp_ipv6.c:1476 sk_backlog_rcv include/net/sock.h:1061 [inline] __release_sock+0x1d8/0x4c0 net/core/sock.c:2849 release_sock+0x5d/0x1c0 net/core/sock.c:3404 sk_stream_wait_memory+0x700/0xdc0 net/core/stream.c:145 tcp_sendmsg_locked+0x111d/0x3fc0 net/ipv4/tcp.c:1410 tcp_sendmsg+0x2c/0x40 net/ipv4/tcp.c:1448 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] __sys_sendto+0x439/0x5c0 net/socket.c:2119 __do_sys_sendto net/socket.c:2131 [inline] __se_sys_sendto net/socket.c:2127 [inline] __x64_sys_sendto+0xda/0xf0 net/socket.c:2127 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6431289109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f643236e168 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f643139c100 RCX: 00007f6431289109 RDX: 00000000d0d0c2ac RSI: 0000000020000080 RDI: 000000000000000a RBP: 00007f64312e308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff372533af R14: 00007f643236e300 R15: 0000000000022000

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw(). fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything when it fails. Commit 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh") moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init() but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak. Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the error path. Note that we can remove the fib6_nh_release() call in nh_create_ipv6() later in net-next.git.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on in ext4_writepages we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first..

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() On removal of the device or unloading of the kernel module a potential NULL pointer dereference occurs. The following sequence deletes the interface: brcmf_detach() brcmf_remove_interface() brcmf_del_if() Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches. After brcmf_remove_interface() call the brcmf_proto_detach() function is called providing the following sequence: brcmf_detach() brcmf_proto_detach() brcmf_proto_msgbuf_detach() brcmf_flowring_detach() brcmf_msgbuf_delete_flowring() brcmf_msgbuf_remove_flowring() brcmf_flowring_delete() brcmf_get_ifp() brcmf_txfinalize() Since brcmf_get_ip() can and actually will return NULL in this case the call to brcmf_txfinalize() will result in a NULL pointer dereference inside brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors. This will only happen if a flowring still has an skb. Although the NULL pointer dereference has only been seen when trying to update the tx statistic, all other uses of the ifp pointer have been guarded as well with an early return if ifp is NULL.

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Ratelimit warning logs to prevent VM denial of service If there's a persistent error in the hypervisor, the SCSI warning for failed I/O can flood the kernel log and max out CPU utilization, preventing troubleshooting from the VM side. Ratelimit the warning so it doesn't DoS the VM.

In the Linux kernel, the following vulnerability has been resolved: net/9p: Fix a potential socket leak in p9_socket_open Both p9_fd_create_tcp() and p9_fd_create_unix() will call p9_socket_open(). If the creation of p9_trans_fd fails, p9_fd_create_tcp() and p9_fd_create_unix() will return an error directly instead of releasing the cscoket, which will result in a socket leak. This patch adds sock_release() to fix the leak issue.

In the Linux kernel, the following vulnerability has been resolved: crypto: qcom-rng - ensure buffer for generate is completely filled The generate function in struct rng_alg expects that the destination buffer is completely filled if the function returns 0. qcom_rng_read() can run into a situation where the buffer is partially filled with randomness and the remaining part of the buffer is zeroed since qcom_rng_generate() doesn't check the return value. This issue can be reproduced by running the following from libkcapi: kcapi-rng -b 9000000 > OUTFILE The generated OUTFILE will have three huge sections that contain all zeros, and this is caused by the code where the test 'val & PRNG_STATUS_DATA_AVAIL' fails. Let's fix this issue by ensuring that qcom_rng_read() always returns with a full buffer if the function returns success. Let's also have qcom_rng_generate() return the correct value. Here's some statistics from the ent project (https://www.fourmilab.ch/random/) that shows information about the quality of the generated numbers: $ ent -c qcom-random-before Value Char Occurrences Fraction 0 606748 0.067416 1 33104 0.003678 2 33001 0.003667 ... 253 � 32883 0.003654 254 � 33035 0.003671 255 � 33239 0.003693 Total: 9000000 1.000000 Entropy = 7.811590 bits per byte. Optimum compression would reduce the size of this 9000000 byte file by 2 percent. Chi square distribution for 9000000 samples is 9329962.81, and randomly would exceed this value less than 0.01 percent of the times. Arithmetic mean value of data bytes is 119.3731 (127.5 = random). Monte Carlo value for Pi is 3.197293333 (error 1.77 percent). Serial correlation coefficient is 0.159130 (totally uncorrelated = 0.0). Without this patch, the results of the chi-square test is 0.01%, and the numbers are certainly not random according to ent's project page. The results improve with this patch: $ ent -c qcom-random-after Value Char Occurrences Fraction 0 35432 0.003937 1 35127 0.003903 2 35424 0.003936 ... 253 � 35201 0.003911 254 � 34835 0.003871 255 � 35368 0.003930 Total: 9000000 1.000000 Entropy = 7.999979 bits per byte. Optimum compression would reduce the size of this 9000000 byte file by 0 percent. Chi square distribution for 9000000 samples is 258.77, and randomly would exceed this value 42.24 percent of the times. Arithmetic mean value of data bytes is 127.5006 (127.5 = random). Monte Carlo value for Pi is 3.141277333 (error 0.01 percent). Serial correlation coefficient is 0.000468 (totally uncorrelated = 0.0). This change was tested on a Nexus 5 phone (msm8974 SoC).

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it Wakeup for IRQ1 should be disabled only in cases where i8042 had actually enabled it, otherwise "wake_depth" for this IRQ will try to drop below zero and there will be an unpleasant WARN() logged: kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug kernel: ------------[ cut here ]------------ kernel: Unbalanced IRQ 1 wake disable kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0 The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and .poweroff handlers. i8042_pm_suspend(), however, is only set as the .suspend handler. Fix the issue by call PMC suspend handler only from the same set of dev_pm_ops handlers as i8042_pm_suspend(), which currently means just the .suspend handler. To reproduce this issue try hibernating (S4) the machine after a fresh boot without putting it into s2idle first. [ij: edited the commit message.]

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: drop beyond-EOF folios with the right number of refs When an after-split folio is large and needs to be dropped due to EOF, folio_put_refs(folio, folio_nr_pages(folio)) should be used to drop all page cache refs. Otherwise, the folio will not be freed, causing memory leak. This leak would happen on a filesystem with blocksize > page_size and a truncate is performed, where the blocksize makes folios split to >0 order ones, causing truncated folios not being freed.

In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix fence reference count leak The last_scheduled fence leaks when an entity is being killed and adding the cleanup callback fails. Decrement the reference count of prev when dma_fence_add_callback() fails, ensuring proper balance. [phasta: add git tag info for stable kernel]

In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu' Commit 176cda0619b6 ("powerpc/perf: Add perf interface to expose vpa counters") introduced 'vpa_pmu' to expose Book3s-HV nested APIv2 provided L1<->L2 context switch latency counters to L1 user-space via perf-events. However the newly introduced PMU named 'vpa_pmu' doesn't assign ownership of the PMU to the module 'vpa_pmu'. Consequently the module 'vpa_pmu' can be unloaded while one of the perf-events are still active, which can lead to kernel oops and panic of the form below on a Pseries-LPAR: BUG: Kernel NULL pointer dereference on read at 0x00000058 <snip> NIP [c000000000506cb8] event_sched_out+0x40/0x258 LR [c00000000050e8a4] __perf_remove_from_context+0x7c/0x2b0 Call Trace: [c00000025fc3fc30] [c00000025f8457a8] 0xc00000025f8457a8 (unreliable) [c00000025fc3fc80] [fffffffffffffee0] 0xfffffffffffffee0 [c00000025fc3fcd0] [c000000000501e70] event_function+0xa8/0x120 <snip> Kernel panic - not syncing: Aiee, killing interrupt handler! Fix this by adding the module ownership to 'vpa_pmu' so that the module 'vpa_pmu' is ref-counted and prevented from being unloaded when perf-events are initialized.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region The device_node pointer is returned by of_parse_phandle() or of_get_child_by_name() with refcount incremented. We should use of_node_put() on it when done. This function only call of_node_put(node) when of_address_to_resource succeeds, missing error cases.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/cs: make commands with 0 chunks illegal behaviour. Submitting a cs with 0 chunks, causes an oops later, found trying to execute the wrong userspace driver. MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo [172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8 [172536.665188] #PF: supervisor read access in kernel mode [172536.665189] #PF: error_code(0x0000) - not-present page [172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0 [172536.665195] Oops: 0000 [#1] SMP NOPTI [172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS [172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015 [172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu] [172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10 [172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246 [172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68 [172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38 [172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40 [172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28 [172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000 [172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0 [172536.665287] Call Trace: [172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm] [172536.665338] drm_ioctl+0x201/0x3b0 [drm] [172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665372] ? selinux_file_ioctl+0x135/0x230 [172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] [172536.665403] __x64_sys_ioctl+0x83/0xb0 [172536.665406] do_syscall_64+0x33/0x40 [172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases If the XDP program doesn't result in XDP_PASS then we leak the memory allocated by am65_cpsw_build_skb(). It is pointless to allocate SKB memory before running the XDP program as we would be wasting CPU cycles for cases other than XDP_PASS. Move the SKB allocation after evaluating the XDP program result. This fixes the memleak. A performance boost is seen for XDP_DROP test. XDP_DROP test: Before: 460256 rx/s 0 err/s After: 784130 rx/s 0 err/s

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix ia_size underflow iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and NFSv4 both define file size as an unsigned 64-bit type. Thus there is a range of valid file size values an NFS client can send that is already larger than Linux can handle. Currently decode_fattr4() dumps a full u64 value into ia_size. If that value happens to be larger than S64_MAX, then ia_size underflows. I'm about to fix up the NFSv3 behavior as well, so let's catch the underflow in the common code path: nfsd_setattr().

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix kernel async DIO Netfslib needs to be able to handle kernel-initiated asynchronous DIO that is supplied with a bio_vec[] array. Currently, because of the async flag, this gets passed to netfs_extract_user_iter() which throws a warning and fails because it only handles IOVEC and UBUF iterators. This can be triggered through a combination of cifs and a loopback blockdev with something like: mount //my/cifs/share /foo dd if=/dev/zero of=/foo/m0 bs=4K count=1K losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0 echo hello >/dev/loop2046 This causes the following to appear in syslog: WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs] and the write to fail. Fix this by removing the check in netfs_unbuffered_write_iter_locked() that causes async kernel DIO writes to be handled as userspace writes. Note that this change relies on the kernel caller maintaining the existence of the bio_vec array (or kvec[] or folio_queue) until the op is complete.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix missing free nid in f2fs_handle_failed_inode This patch fixes xfstests/generic/475 failure. [ 293.680694] F2FS-fs (dm-1): May loss orphan inode, run fsck to fix. [ 293.685358] Buffer I/O error on dev dm-1, logical block 8388592, async page read [ 293.691527] Buffer I/O error on dev dm-1, logical block 8388592, async page read [ 293.691764] sh (7615): drop_caches: 3 [ 293.691819] sh (7616): drop_caches: 3 [ 293.694017] Buffer I/O error on dev dm-1, logical block 1, async page read [ 293.695659] sh (7618): drop_caches: 3 [ 293.696979] sh (7617): drop_caches: 3 [ 293.700290] sh (7623): drop_caches: 3 [ 293.708621] sh (7626): drop_caches: 3 [ 293.711386] sh (7628): drop_caches: 3 [ 293.711825] sh (7627): drop_caches: 3 [ 293.716738] sh (7630): drop_caches: 3 [ 293.719613] sh (7632): drop_caches: 3 [ 293.720971] sh (7633): drop_caches: 3 [ 293.727741] sh (7634): drop_caches: 3 [ 293.730783] sh (7636): drop_caches: 3 [ 293.732681] sh (7635): drop_caches: 3 [ 293.732988] sh (7637): drop_caches: 3 [ 293.738836] sh (7639): drop_caches: 3 [ 293.740568] sh (7641): drop_caches: 3 [ 293.743053] sh (7640): drop_caches: 3 [ 293.821889] ------------[ cut here ]------------ [ 293.824654] kernel BUG at fs/f2fs/node.c:3334! [ 293.826226] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 293.828713] CPU: 0 PID: 7653 Comm: umount Tainted: G OE 5.17.0-rc1-custom #1 [ 293.830946] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 293.832526] RIP: 0010:f2fs_destroy_node_manager+0x33f/0x350 [f2fs] [ 293.833905] Code: e8 d6 3d f9 f9 48 8b 45 d0 65 48 2b 04 25 28 00 00 00 75 1a 48 81 c4 28 03 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b [ 293.837783] RSP: 0018:ffffb04ec31e7a20 EFLAGS: 00010202 [ 293.839062] RAX: 0000000000000001 RBX: ffff9df947db2eb8 RCX: 0000000080aa0072 [ 293.840666] RDX: 0000000000000000 RSI: ffffe86c0432a140 RDI: ffffffffc0b72a21 [ 293.842261] RBP: ffffb04ec31e7d70 R08: ffff9df94ca85780 R09: 0000000080aa0072 [ 293.843909] R10: ffff9df94ca85700 R11: ffff9df94e1ccf58 R12: ffff9df947db2e00 [ 293.845594] R13: ffff9df947db2ed0 R14: ffff9df947db2eb8 R15: ffff9df947db2eb8 [ 293.847855] FS: 00007f5a97379800(0000) GS:ffff9dfa77c00000(0000) knlGS:0000000000000000 [ 293.850647] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 293.852940] CR2: 00007f5a97528730 CR3: 000000010bc76005 CR4: 0000000000370ef0 [ 293.854680] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 293.856423] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 293.858380] Call Trace: [ 293.859302] <TASK> [ 293.860311] ? ttwu_do_wakeup+0x1c/0x170 [ 293.861800] ? ttwu_do_activate+0x6d/0xb0 [ 293.863057] ? _raw_spin_unlock_irqrestore+0x29/0x40 [ 293.864411] ? try_to_wake_up+0x9d/0x5e0 [ 293.865618] ? debug_smp_processor_id+0x17/0x20 [ 293.866934] ? debug_smp_processor_id+0x17/0x20 [ 293.868223] ? free_unref_page+0xbf/0x120 [ 293.869470] ? __free_slab+0xcb/0x1c0 [ 293.870614] ? preempt_count_add+0x7a/0xc0 [ 293.871811] ? __slab_free+0xa0/0x2d0 [ 293.872918] ? __wake_up_common_lock+0x8a/0xc0 [ 293.874186] ? __slab_free+0xa0/0x2d0 [ 293.875305] ? free_inode_nonrcu+0x20/0x20 [ 293.876466] ? free_inode_nonrcu+0x20/0x20 [ 293.877650] ? debug_smp_processor_id+0x17/0x20 [ 293.878949] ? call_rcu+0x11a/0x240 [ 293.880060] ? f2fs_destroy_stats+0x59/0x60 [f2fs] [ 293.881437] ? kfree+0x1fe/0x230 [ 293.882674] f2fs_put_super+0x160/0x390 [f2fs] [ 293.883978] generic_shutdown_super+0x7a/0x120 [ 293.885274] kill_block_super+0x27/0x50 [ 293.886496] kill_f2fs_super+0x7f/0x100 [f2fs] [ 293.887806] deactivate_locked_super+0x35/0xa0 [ 293.889271] deactivate_super+0x40/0x50 [ 293.890513] cleanup_mnt+0x139/0x190 [ 293.891689] __cleanup_mnt+0x12/0x20 [ 293.892850] task_work_run+0x64/0xa0 [ 293.894035] exit_to_user_mode_prepare+0x1b7/ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: virtio: use virtio_device_ready() in virtio_device_restore() After waking up a suspended VM, the kernel prints the following trace for virtio drivers which do not directly call virtio_device_ready() in the .restore: PM: suspend exit irq 22: nobody cared (try booting with the "irqpoll" option) Call Trace: <IRQ> dump_stack_lvl+0x38/0x49 dump_stack+0x10/0x12 __report_bad_irq+0x3a/0xaf note_interrupt.cold+0xb/0x60 handle_irq_event+0x71/0x80 handle_fasteoi_irq+0x95/0x1e0 __common_interrupt+0x6b/0x110 common_interrupt+0x63/0xe0 asm_common_interrupt+0x1e/0x40 ? __do_softirq+0x75/0x2f3 irq_exit_rcu+0x93/0xe0 sysvec_apic_timer_interrupt+0xac/0xd0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch_cpu_idle+0x12/0x20 default_idle_call+0x39/0xf0 do_idle+0x1b5/0x210 cpu_startup_entry+0x20/0x30 start_secondary+0xf3/0x100 secondary_startup_64_no_verify+0xc3/0xcb </TASK> handlers: [<000000008f9bac49>] vp_interrupt [<000000008f9bac49>] vp_interrupt Disabling IRQ #22 This happens because we don't invoke .enable_cbs callback in virtio_device_restore(). That callback is used by some transports (e.g. virtio-pci) to enable interrupts. Let's fix it, by calling virtio_device_ready() as we do in virtio_dev_probe(). This function calls .enable_cts callback and sets DRIVER_OK status bit. This fix also avoids setting DRIVER_OK twice for those drivers that call virtio_device_ready() in the .restore.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: Fix memory leaks on probe Handle the error branches to free memory where required. Addresses-Coverity-ID: 1491825 ("Resource leak")

In the Linux kernel, the following vulnerability has been resolved: ath11k: fix kernel panic during unload/load ath11k modules Call netif_napi_del() from ath11k_ahb_free_ext_irq() to fix the following kernel panic when unload/load ath11k modules for few iterations. [ 971.201365] Unable to handle kernel paging request at virtual address 6d97a208 [ 971.204227] pgd = 594c2919 [ 971.211478] [6d97a208] *pgd=00000000 [ 971.214120] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 971.412024] CPU: 2 PID: 4435 Comm: insmod Not tainted 5.4.89 #0 [ 971.434256] Hardware name: Generic DT based system [ 971.440165] PC is at napi_by_id+0x10/0x40 [ 971.445019] LR is at netif_napi_add+0x160/0x1dc [ 971.743127] (napi_by_id) from [<807d89a0>] (netif_napi_add+0x160/0x1dc) [ 971.751295] (netif_napi_add) from [<7f1209ac>] (ath11k_ahb_config_irq+0xf8/0x414 [ath11k_ahb]) [ 971.759164] (ath11k_ahb_config_irq [ath11k_ahb]) from [<7f12135c>] (ath11k_ahb_probe+0x40c/0x51c [ath11k_ahb]) [ 971.768567] (ath11k_ahb_probe [ath11k_ahb]) from [<80666864>] (platform_drv_probe+0x48/0x94) [ 971.779670] (platform_drv_probe) from [<80664718>] (really_probe+0x1c8/0x450) [ 971.789389] (really_probe) from [<80664cc4>] (driver_probe_device+0x15c/0x1b8) [ 971.797547] (driver_probe_device) from [<80664f60>] (device_driver_attach+0x44/0x60) [ 971.805795] (device_driver_attach) from [<806650a0>] (__driver_attach+0x124/0x140) [ 971.814822] (__driver_attach) from [<80662adc>] (bus_for_each_dev+0x58/0xa4) [ 971.823328] (bus_for_each_dev) from [<80663a2c>] (bus_add_driver+0xf0/0x1e8) [ 971.831662] (bus_add_driver) from [<806658a4>] (driver_register+0xa8/0xf0) [ 971.839822] (driver_register) from [<8030269c>] (do_one_initcall+0x78/0x1ac) [ 971.847638] (do_one_initcall) from [<80392524>] (do_init_module+0x54/0x200) [ 971.855968] (do_init_module) from [<803945b0>] (load_module+0x1e30/0x1ffc) [ 971.864126] (load_module) from [<803948b0>] (sys_init_module+0x134/0x17c) [ 971.871852] (sys_init_module) from [<80301000>] (ret_fast_syscall+0x0/0x50) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_arm: Fix possible NPR of keep-alive thread In case vchiq_platform_conn_state_changed() is never called or fails before driver removal, ka_thread won't be a valid pointer to a task_struct. So do the necessary checks before calling kthread_stop to avoid a crash.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent connection release during oplock break notification ksmbd_work could be freed when after connection release. Increment r_count of ksmbd_conn to indicate that requests are not finished yet and to not release the connection.

In the Linux kernel 4.4 through 5.7.6, usbtest_disconnect in drivers/usb/misc/usbtest.c has a memory leak, aka CID-28ebeb8db770.

In the Linux kernel, the following vulnerability has been resolved: ptp: vmclock: Add .owner to vmclock_miscdev_fops Without the .owner field, the module can be unloaded while /dev/vmclock0 is open, leading to an oops.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag: depending on that flag, the pages in the address space will either use buffer heads or iomap_folio_state structs, and we cannot mix the two.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error During the initialization of ptp, hclge_ptp_get_cycle might return an error and returned directly without unregister clock and free it. To avoid that, call hclge_ptp_destroy_clock to unregist and free clock if hclge_ptp_get_cycle failed.

In the Linux kernel, the following vulnerability has been resolved: firewire: test: Fix potential null dereference in firewire kunit test kunit_kzalloc() may return a NULL pointer, dereferencing it without NULL check may lead to NULL dereference. Add a NULL check for test_state.

In the Linux kernel, the following vulnerability has been resolved: clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context The following bug report happened with a PREEMPT_RT kernel: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2012, name: kwatchdog preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 get_random_u32+0x4f/0x110 clocksource_verify_choose_cpus+0xab/0x1a0 clocksource_verify_percpu.part.0+0x6b/0x330 clocksource_watchdog_kthread+0x193/0x1a0 It is due to the fact that clocksource_verify_choose_cpus() is invoked with preemption disabled. This function invokes get_random_u32() to obtain random numbers for choosing CPUs. The batched_entropy_32 local lock and/or the base_crng.lock spinlock in driver/char/random.c will be acquired during the call. In PREEMPT_RT kernel, they are both sleeping locks and so cannot be acquired in atomic context. Fix this problem by using migrate_disable() to allow smp_processor_id() to be reliably used without introducing atomic context. preempt_disable() is then called after clocksource_verify_choose_cpus() but before the clocksource measurement is being run to avoid introducing unexpected latency.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, pair only capable devices OFFLOADS paring using devcom is possible only on devices that support LAG. Filter based on lag capabilities. This fixes an issue where mlx5_get_next_phys_dev() was called without holding the interface lock. This issue was found when commit bc4c2f2e0179 ("net/mlx5: Lag, filter non compatible devices") added an assert that verifies the interface lock is held. WARNING: CPU: 9 PID: 1706 at drivers/net/ethernet/mellanox/mlx5/core/dev.c:642 mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Modules linked in: mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm ib_uverbs ib_core overlay fuse [last unloaded: mlx5_core] CPU: 9 PID: 1706 Comm: devlink Not tainted 5.18.0-rc7+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Code: 02 00 75 48 48 8b 85 80 04 00 00 5d c3 31 c0 5d c3 be ff ff ff ff 48 c7 c7 08 41 5b a0 e8 36 87 28 e3 85 c0 0f 85 6f ff ff ff <0f> 0b e9 68 ff ff ff 48 c7 c7 0c 91 cc 84 e8 cb 36 6f e1 e9 4d ff RSP: 0018:ffff88811bf47458 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88811b398000 RCX: 0000000000000001 RDX: 0000000080000000 RSI: ffffffffa05b4108 RDI: ffff88812daaaa78 RBP: ffff88812d050380 R08: 0000000000000001 R09: ffff88811d6b3437 R10: 0000000000000001 R11: 00000000fddd3581 R12: ffff88815238c000 R13: ffff88812d050380 R14: ffff8881018aa7e0 R15: ffff88811d6b3428 FS: 00007fc82e18ae80(0000) GS:ffff88842e080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9630d1b421 CR3: 0000000149802004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mlx5_esw_offloads_devcom_event+0x99/0x3b0 [mlx5_core] mlx5_devcom_send_event+0x167/0x1d0 [mlx5_core] esw_offloads_enable+0x1153/0x1500 [mlx5_core] ? mlx5_esw_offloads_controller_valid+0x170/0x170 [mlx5_core] ? wait_for_completion_io_timeout+0x20/0x20 ? mlx5_rescan_drivers_locked+0x318/0x810 [mlx5_core] mlx5_eswitch_enable_locked+0x586/0xc50 [mlx5_core] ? mlx5_eswitch_disable_pf_vf_vports+0x1d0/0x1d0 [mlx5_core] ? mlx5_esw_try_lock+0x1b/0xb0 [mlx5_core] ? mlx5_eswitch_enable+0x270/0x270 [mlx5_core] ? __debugfs_create_file+0x260/0x3e0 mlx5_devlink_eswitch_mode_set+0x27e/0x870 [mlx5_core] ? mutex_lock_io_nested+0x12c0/0x12c0 ? esw_offloads_disable+0x250/0x250 [mlx5_core] ? devlink_nl_cmd_trap_get_dumpit+0x470/0x470 ? rcu_read_lock_sched_held+0x3f/0x70 devlink_nl_cmd_eswitch_set_doit+0x217/0x620