In the Linux kernel, the following vulnerability has been resolved: tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized This commit fixes a bug (found by syzkaller) that could cause spurious double-initializations for congestion control modules, which could cause memory leaks or other problems for congestion control modules (like CDG) that allocate memory in their init functions. The buggy scenario constructed by syzkaller was something like: (1) create a TCP socket (2) initiate a TFO connect via sendto() (3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION), which calls: tcp_set_congestion_control() -> tcp_reinit_congestion_control() -> tcp_init_congestion_control() (4) receive ACK, connection is established, call tcp_init_transfer(), set icsk_ca_initialized=0 (without first calling cc->release()), call tcp_init_congestion_control() again. Note that in this sequence tcp_init_congestion_control() is called twice without a cc->release() call in between. Thus, for CC modules that allocate memory in their init() function, e.g, CDG, a memory leak may occur. The syzkaller tool managed to find a reproducer that triggered such a leak in CDG. The bug was introduced when that commit 8919a9b31eb4 ("tcp: Only init congestion control if not initialized already") introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in tcp_init_transfer(), missing the possibility for a sequence like the one above, where a process could call setsockopt(TCP_CONGESTION) in state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()), which would call tcp_init_congestion_control(). It did not intend to reset any initialization that the user had already explicitly made; it just missed the possibility of that particular sequence (which syzkaller managed to find).

In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Fix potential memory leak about jit_data Make sure to free jit_data through kfree() in the error path.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() Commit 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()"), intended to change: bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN bsg_job->request->msgcode != FC_BSG_RPT_ELS but changed it to: bsg_job->request->msgcode == FC_BSG_RPT_ELS instead. Change the == to a != to avoid leaking the fcport structure or freeing unallocated memory.

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free() If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it happened in the bug report by syzbot), virtio_gpu_array_put_free() could be called with objs equal to NULL. Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise return from the function.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: cirrusfb: check pixclock to avoid divide by zero Do a sanity check on pixclock value to avoid divide by zero. If the pixclock value is zero, the cirrusfb driver will round up pixclock to get the derived frequency as close to maxclock as possible. Syzkaller reported a divide error in cirrusfb_check_pixclock. divide error: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2 RIP: 0010:cirrusfb_check_var+0x6f1/0x1260 Call Trace: fb_set_var+0x398/0xf90 do_fb_ioctl+0x4b8/0x6f0 fb_ioctl+0xeb/0x130 __x64_sys_ioctl+0x19d/0x220 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: net: usb: fix memory leak in smsc75xx_bind Syzbot reported memory leak in smsc75xx_bind(). The problem was is non-freed memory in case of errors after memory allocation. backtrace: [<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline] [<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline] [<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460 [<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip netdev events generated on netns removal syzbot reported following (harmless) WARN: WARNING: CPU: 1 PID: 2648 at net/netfilter/core.c:468 nft_netdev_unregister_hooks net/netfilter/nf_tables_api.c:230 [inline] nf_tables_unregister_hook include/net/netfilter/nf_tables.h:1090 [inline] __nft_release_basechain+0x138/0x640 net/netfilter/nf_tables_api.c:9524 nft_netdev_event net/netfilter/nft_chain_filter.c:351 [inline] nf_tables_netdev_event+0x521/0x8a0 net/netfilter/nft_chain_filter.c:382 reproducer: unshare -n bash -c 'ip link add br0 type bridge; nft add table netdev t ; \ nft add chain netdev t ingress \{ type filter hook ingress device "br0" \ priority 0\; policy drop\; \}' Problem is that when netns device exit hooks create the UNREGISTER event, the .pre_exit hook for nf_tables core has already removed the base hook. Notifier attempts to do this again. The need to do base hook unregister unconditionally was needed in the past, because notifier was last stage where reg->dev dereference was safe. Now that nf_tables does the hook removal in .pre_exit, this isn't needed anymore.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_ets: don't remove idle classes from the round-robin list Shuang reported that the following script: 1) tc qdisc add dev ddd0 handle 10: parent 1: ets bands 8 strict 4 priomap 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 2) mausezahn ddd0 -A 10.10.10.1 -B 10.10.10.2 -c 0 -a own -b 00:c1:a0:c1:a0:00 -t udp & 3) tc qdisc change dev ddd0 handle 10: ets bands 4 strict 2 quanta 2500 2500 priomap 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 crashes systematically when line 2) is commented: list_del corruption, ffff8e028404bd30->next is LIST_POISON1 (dead000000000100) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 954 Comm: tc Not tainted 5.16.0-rc4+ #478 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000682f48 CR3: 00000001058be000 CR4: 0000000000350ef0 Call Trace: <TASK> ets_qdisc_change+0x58b/0xa70 [sch_ets] tc_modify_qdisc+0x323/0x880 rtnetlink_rcv_msg+0x169/0x4a0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x257/0x4d0 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7efdc8031338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffdf1ce9828 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061b37a97 RCX: 00007efdc8031338 RDX: 0000000000000000 RSI: 00007ffdf1ce9890 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000078a940 R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000688880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev pcspkr i2c_i801 virtio_balloon i2c_smbus lpc_ich ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel serio_raw ghash_clmulni_intel ahci libahci libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: sch_ets] ---[ end trace f35878d1912655c2 ]--- RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd934x: handle channel mappping list correctly Currently each channel is added as list to dai channel list, however there is danger of adding same channel to multiple dai channel list which endups corrupting the other list where its already added. This patch ensures that the channel is actually free before adding to the dai channel list and also ensures that the channel is on the list before deleting it. This check was missing previously, and we did not hit this issue as we were testing very simple usecases with sequence of amixer commands.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe Following commit 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()"), COMP_DUMMY() became an array with zero length, and only gets populated with the dummy struct after the card is registered. Since the sound card driver's probe happens before the card registration, accessing any of the members of a dummy component during probe will result in undefined behavior. This can be observed in the mt8188 and mt8195 machine sound drivers. By omitting a dai link subnode in the sound card's node in the Devicetree, the default uninitialized dummy codec is used, and when its dai_name pointer gets passed to strcmp() it results in a null pointer dereference and a kernel panic. In addition to that, set_card_codec_info() in the generic helpers file, mtk-soundcard-driver.c, will populate a dai link with a dummy codec when a dai link node is present in DT but with no codec property. The result is that at probe time, a dummy codec can either be uninitialized with num_codecs = 0, or be an initialized dummy codec, with num_codecs = 1 and dai_name = "snd-soc-dummy-dai". In order to accommodate for both situations, check that num_codecs is not zero before accessing the codecs' fields but still check for the codec's dai name against "snd-soc-dummy-dai" as needed. While at it, also drop the check that dai_name is not null in the mt8192 driver, introduced in commit 4d4e1b6319e5 ("ASoC: mediatek: mt8192: Check existence of dai_name before dereferencing"), as it is actually redundant given the preceding num_codecs != 0 check.

In the Linux kernel, the following vulnerability has been resolved: tipc: improve size validations for received domain records The function tipc_mon_rcv() allows a node to receive and process domain_record structs from peer nodes to track their views of the network topology. This patch verifies that the number of members in a received domain record does not exceed the limit defined by MAX_MON_DOMAIN, something that may otherwise lead to a stack overflow. tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where we are reading a 32 bit message data length field into a uint16. To avert any risk of bit overflow, we add an extra sanity check for this in that function. We cannot see that happen with the current code, but future designers being unaware of this risk, may introduce it by allowing delivery of very large (> 64k) sk buffers from the bearer layer. This potential problem was identified by Eric Dumazet. This fixes CVE-2022-0435

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix freeing of uninitialized misc IRQ vector When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized.

In the Linux kernel, the following vulnerability has been resolved: dm btree remove: assign new_root only when removal succeeds remove_raw() in dm_btree_remove() may fail due to IO read error (e.g. read the content of origin block fails during shadowing), and the value of shadow_spine::root is uninitialized, but the uninitialized value is still assign to new_root in the end of dm_btree_remove(). For dm-thin, the value of pmd->details_root or pmd->root will become an uninitialized value, so if trying to read details_info tree again out-of-bound memory may occur as showed below: general protection fault, probably for non-canonical address 0x3fdcb14c8d7520 CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6 Hardware name: QEMU Standard PC RIP: 0010:metadata_ll_load_ie+0x14/0x30 Call Trace: sm_metadata_count_is_more_than_one+0xb9/0xe0 dm_tm_shadow_block+0x52/0x1c0 shadow_step+0x59/0xf0 remove_raw+0xb2/0x170 dm_btree_remove+0xf4/0x1c0 dm_pool_delete_thin_device+0xc3/0x140 pool_message+0x218/0x2b0 target_message+0x251/0x290 ctl_ioctl+0x1c4/0x4d0 dm_ctl_ioctl+0xe/0x20 __x64_sys_ioctl+0x7b/0xb0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixing it by only assign new_root when removal succeeds

In the Linux kernel, the following vulnerability has been resolved: blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release() For avoiding to slow down queue destroy, we don't call blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to cancel dispatch work in blk_release_queue(). However, this way has caused kernel oops[1], reported by Changhui. The log shows that scsi_device can be freed before running blk_release_queue(), which is expected too since scsi_device is released after the scsi disk is closed and the scsi_device is removed. Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue() and disk_release(): 1) when disk_release() is run, the disk has been closed, and any sync dispatch activities have been done, so canceling dispatch work is enough to quiesce filesystem I/O dispatch activity. 2) in blk_cleanup_queue(), we only focus on passthrough request, and passthrough request is always explicitly allocated & freed by its caller, so once queue is frozen, all sync dispatch activity for passthrough request has been done, then it is enough to just cancel dispatch work for avoiding any dispatch activity. [1] kernel panic log [12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300 [12622.777186] #PF: supervisor read access in kernel mode [12622.782918] #PF: error_code(0x0000) - not-present page [12622.788649] PGD 0 P4D 0 [12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI [12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1 [12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [12622.813321] Workqueue: kblockd blk_mq_run_work_fn [12622.818572] RIP: 0010:sbitmap_get+0x75/0x190 [12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58 [12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202 [12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004 [12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030 [12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334 [12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000 [12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030 [12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000 [12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0 [12622.913328] Call Trace: [12622.916055] <TASK> [12622.918394] scsi_mq_get_budget+0x1a/0x110 [12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320 [12622.928404] ? pick_next_task_fair+0x39/0x390 [12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140 [12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60 [12622.944829] __blk_mq_run_hw_queue+0x30/0xa0 [12622.949593] process_one_work+0x1e8/0x3c0 [12622.954059] worker_thread+0x50/0x3b0 [12622.958144] ? rescuer_thread+0x370/0x370 [12622.962616] kthread+0x158/0x180 [12622.966218] ? set_kthread_struct+0x40/0x40 [12622.970884] ret_from_fork+0x22/0x30 [12622.974875] </TASK> [12622.977309] Modules linked in: scsi_debug rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs sunrpc dm_multipath intel_rapl_msr intel_rapl_common dell_wmi_descriptor sb_edac rfkill video x86_pkg_temp_thermal intel_powerclamp dcdbas coretemp kvm_intel kvm mgag200 irqbypass i2c_algo_bit rapl drm_kms_helper ipmi_ssif intel_cstate intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops pcspkr cec mei_me lpc_ich mei ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg ixgbe ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata megaraid_sas ghash_clmulni_intel tg3 wdat_w ---truncated---

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: fix memory leak in nci_allocate_device nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev. Fix this by freeing hci_dev in nci_free_device. BUG: memory leak unreferenced object 0xffff888111ea6800 (size 1024): comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline] [<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline] [<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784 [<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline] [<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132 [<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153 [<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345 [<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 [<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740 [<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846 [<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914 [<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109 [<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164 [<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554

An issue was discovered in drivers/media/test-drivers/vidtv/vidtv_bridge.c in the Linux kernel 6.2. There is a NULL pointer dereference in vidtv_mux_stop_thread. In vidtv_stop_streaming, after dvb->mux=NULL occurs, it executes vidtv_mux_stop_thread(dvb->mux).

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: bgmac: Fix refcount leak in bcma_mdio_mii_register of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix memleak in sk_psock_queue_msg If tcp_bpf_sendmsg is running during a tear down operation we may enqueue data on the ingress msg queue while tear down is trying to free it. sk1 (redirect sk2) sk2 ------------------- --------------- tcp_bpf_sendmsg() tcp_bpf_send_verdict() tcp_bpf_sendmsg_redir() bpf_tcp_ingress() sock_map_close() lock_sock() lock_sock() ... blocking sk_psock_stop sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED); release_sock(sk); lock_sock() sk_mem_charge() get_page() sk_psock_queue_msg() sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED); drop_sk_msg() release_sock() While drop_sk_msg(), the msg has charged memory form sk by sk_mem_charge and has sg pages need to put. To fix we use sk_msg_free() and then kfee() msg. This issue can cause the following info: WARNING: CPU: 0 PID: 9202 at net/core/stream.c:205 sk_stream_kill_queues+0xc8/0xe0 Call Trace: <IRQ> inet_csk_destroy_sock+0x55/0x110 tcp_rcv_state_process+0xe5f/0xe90 ? sk_filter_trim_cap+0x10d/0x230 ? tcp_v4_do_rcv+0x161/0x250 tcp_v4_do_rcv+0x161/0x250 tcp_v4_rcv+0xc3a/0xce0 ip_protocol_deliver_rcu+0x3d/0x230 ip_local_deliver_finish+0x54/0x60 ip_local_deliver+0xfd/0x110 ? ip_protocol_deliver_rcu+0x230/0x230 ip_rcv+0xd6/0x100 ? ip_local_deliver+0x110/0x110 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0xa4/0x160 __napi_poll+0x29/0x1b0 net_rx_action+0x287/0x300 __do_softirq+0xff/0x2fc do_softirq+0x79/0x90 </IRQ> WARNING: CPU: 0 PID: 531 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x175/0x1b0 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>

The __sys_sendmsg function in net/socket.c in the Linux kernel before 3.1 allows local users to cause a denial of service (system crash) via crafted use of the sendmmsg system call, leading to an incorrect pointer dereference.

The m_stop function in fs/proc/task_mmu.c in the Linux kernel before 2.6.39 allows local users to cause a denial of service (OOPS) via vectors that trigger an m_start error.

A flaw was found in the IPv6 module of the Linux kernel. The arg.result was not used consistently in fib6_rule_lookup, sometimes holding rt6_info and other times fib6_info. This was not accounted for in other parts of the code where rt6_info was expected unconditionally, potentially leading to a kernel panic in fib6_rule_suppress.

In the Linux kernel, the following vulnerability has been resolved: netlink: fix false positive warning in extack during dumps Commit under fixes extended extack reporting to dumps. It works under normal conditions, because extack errors are usually reported during ->start() or the first ->dump(), it's quite rare that the dump starts okay but fails later. If the dump does fail later, however, the input skb will already have the initiating message pulled, so checking if bad attr falls within skb->data will fail. Switch the check to using nlh, which is always valid. syzbot found a way to hit that scenario by filling up the receive queue. In this case we initiate a dump but don't call ->dump() until there is read space for an skb. WARNING: CPU: 1 PID: 5845 at net/netlink/af_netlink.c:2210 netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209 RIP: 0010:netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209 Call Trace: <TASK> netlink_dump_done+0x513/0x970 net/netlink/af_netlink.c:2250 netlink_dump+0x91f/0xe10 net/netlink/af_netlink.c:2351 netlink_recvmsg+0x6bb/0x11d0 net/netlink/af_netlink.c:1983 sock_recvmsg_nosec net/socket.c:1051 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1073 __sys_recvfrom+0x246/0x3d0 net/socket.c:2267 __do_sys_recvfrom net/socket.c:2285 [inline] __se_sys_recvfrom net/socket.c:2281 [inline] __x64_sys_recvfrom+0xde/0x100 net/socket.c:2281 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff37dd17a79

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: fix a NULL-pointer dereference Some SCM calls can be invoked with __scm being NULL (the driver may not have been and will not be probed as there's no SCM entry in device-tree). Make sure we don't dereference a NULL pointer.

The net subsystem in the Linux kernel before 3.1 does not properly restrict use of the IFF_TX_SKB_SHARING flag, which allows local users to cause a denial of service (panic) by leveraging the CAP_NET_ADMIN capability to access /proc/net/pktgen/pgctrl, and then using the pktgen package in conjunction with a bridge device for a VLAN interface.

In the Linux kernel, the following vulnerability has been resolved: block: Prevent potential deadlocks in zone write plug error recovery Zone write plugging for handling writes to zones of a zoned block device always execute a zone report whenever a write BIO to a zone fails. The intent of this is to ensure that the tracking of a zone write pointer is always correct to ensure that the alignment to a zone write pointer of write BIOs can be checked on submission and that we can always correctly emulate zone append operations using regular write BIOs. However, this error recovery scheme introduces a potential deadlock if a device queue freeze is initiated while BIOs are still plugged in a zone write plug and one of these write operation fails. In such case, the disk zone write plug error recovery work is scheduled and executes a report zone. This in turn can result in a request allocation in the underlying driver to issue the report zones command to the device. But with the device queue freeze already started, this allocation will block, preventing the report zone execution and the continuation of the processing of the plugged BIOs. As plugged BIOs hold a queue usage reference, the queue freeze itself will never complete, resulting in a deadlock. Avoid this problem by completely removing from the zone write plugging code the use of report zones operations after a failed write operation, instead relying on the device user to either execute a report zones, reset the zone, finish the zone, or give up writing to the device (which is a fairly common pattern for file systems which degrade to read-only after write failures). This is not an unreasonnable requirement as all well-behaved applications, FSes and device mapper already use report zones to recover from write errors whenever possible by comparing the current position of a zone write pointer with what their assumption about the position is. The changes to remove the automatic error recovery are as follows: - Completely remove the error recovery work and its associated resources (zone write plug list head, disk error list, and disk zone_wplugs_work work struct). This also removes the functions disk_zone_wplug_set_error() and disk_zone_wplug_clear_error(). - Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write plug whenever a write opration targetting the zone of the zone write plug fails. This flag indicates that the zone write pointer offset is not reliable and that it must be updated when the next report zone, reset zone, finish zone or disk revalidation is executed. - Modify blk_zone_write_plug_bio_endio() to set the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed write BIO. - Modify the function disk_zone_wplug_set_wp_offset() to clear this new flag, thus implementing recovery of a correct write pointer offset with the reset (all) zone and finish zone operations. - Modify blkdev_report_zones() to always use the disk_report_zones_cb() callback so that disk_zone_wplug_sync_wp_offset() can be called for any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag. This implements recovery of a correct write pointer offset for zone write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within the range of the report zones operation executed by the user. - Modify blk_revalidate_seq_zone() to call disk_zone_wplug_sync_wp_offset() for all sequential write required zones when a zoned block device is revalidated, thus always resolving any inconsistency between the write pointer offset of zone write plugs and the actual write pointer position of sequential zones.

In the Linux kernel, the following vulnerability has been resolved: bpf: track changes_pkt_data property for global functions When processing calls to certain helpers, verifier invalidates all packet pointers in a current state. For example, consider the following program: __attribute__((__noinline__)) long skb_pull_data(struct __sk_buff *sk, __u32 len) { return bpf_skb_pull_data(sk, len); } SEC("tc") int test_invalidate_checks(struct __sk_buff *sk) { int *p = (void *)(long)sk->data; if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP; skb_pull_data(sk, 0); *p = 42; return TCX_PASS; } After a call to bpf_skb_pull_data() the pointer 'p' can't be used safely. See function filter.c:bpf_helper_changes_pkt_data() for a list of such helpers. At the moment verifier invalidates packet pointers when processing helper function calls, and does not traverse global sub-programs when processing calls to global sub-programs. This means that calls to helpers done from global sub-programs do not invalidate pointers in the caller state. E.g. the program above is unsafe, but is not rejected by verifier. This commit fixes the omission by computing field bpf_subprog_info->changes_pkt_data for each sub-program before main verification pass. changes_pkt_data should be set if: - subprogram calls helper for which bpf_helper_changes_pkt_data returns true; - subprogram calls a global function, for which bpf_subprog_info->changes_pkt_data should be set. The verifier.c:check_cfg() pass is modified to compute this information. The commit relies on depth first instruction traversal done by check_cfg() and absence of recursive function calls: - check_cfg() would eventually visit every call to subprogram S in a state when S is fully explored; - when S is fully explored: - every direct helper call within S is explored (and thus changes_pkt_data is set if needed); - every call to subprogram S1 called by S was visited with S1 fully explored (and thus S inherits changes_pkt_data from S1). The downside of such approach is that dead code elimination is not taken into account: if a helper call inside global function is dead because of current configuration, verifier would conservatively assume that the call occurs for the purpose of the changes_pkt_data computation.

In the Linux kernel, the following vulnerability has been resolved: idpf: convert workqueues to unbound When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`.

In the Linux kernel, the following vulnerability has been resolved: rhashtable: Fix potential deadlock by moving schedule_work outside lock Move the hash table growth check and work scheduling outside the rht lock to prevent a possible circular locking dependency. The original implementation could trigger a lockdep warning due to a potential deadlock scenario involving nested locks between rhashtable bucket, rq lock, and dsq lock. By relocating the growth check and work scheduling after releasing the rth lock, we break this potential deadlock chain. This change expands the flexibility of rhashtable by removing restrictive locking that previously limited its use in scheduler and workqueue contexts. Import to say that this calls rht_grow_above_75(), which reads from struct rhashtable without holding the lock, if this is a problem, we can move the check to the lock, and schedule the workqueue after the lock. Modified so that atomic_inc is also moved outside of the bucket lock along with the growth above 75% check.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: dispcc-sm6350: Add missing parent_map for a clock If a clk_rcg2 has a parent, it should also have parent_map defined, otherwise we'll get a NULL pointer dereference when calling clk_set_rate like the following: [ 3.388105] Call trace: [ 3.390664] qcom_find_src_index+0x3c/0x70 (P) [ 3.395301] qcom_find_src_index+0x1c/0x70 (L) [ 3.399934] _freq_tbl_determine_rate+0x48/0x100 [ 3.404753] clk_rcg2_determine_rate+0x1c/0x28 [ 3.409387] clk_core_determine_round_nolock+0x58/0xe4 [ 3.421414] clk_core_round_rate_nolock+0x48/0xfc [ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc [ 3.444483] clk_core_set_rate_nolock+0x8c/0x300 [ 3.455886] clk_set_rate+0x38/0x14c Add the parent_map property for the clock where it's missing and also un-inline the parent_data as well to keep the matching parent_map and parent_data together.

The Linux kernel before 2.6.37 does not properly implement a certain clock-update optimization, which allows local users to cause a denial of service (system hang) via an application that executes code in a loop.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction atomicity bug when enabling simple quotas Set squota incompat bit before committing the transaction that enables the feature. With the config CONFIG_BTRFS_ASSERT enabled, an assertion failure occurs regarding the simple quota feature. [5.596534] assertion failed: btrfs_fs_incompat(fs_info, SIMPLE_QUOTA), in fs/btrfs/qgroup.c:365 [5.597098] ------------[ cut here ]------------ [5.597371] kernel BUG at fs/btrfs/qgroup.c:365! [5.597946] CPU: 1 UID: 0 PID: 268 Comm: mount Not tainted 6.13.0-rc2-00031-gf92f4749861b #146 [5.598450] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [5.599008] RIP: 0010:btrfs_read_qgroup_config+0x74d/0x7a0 [5.604303] <TASK> [5.605230] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.605538] ? exc_invalid_op+0x56/0x70 [5.605775] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606066] ? asm_exc_invalid_op+0x1f/0x30 [5.606441] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606741] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.607038] ? try_to_wake_up+0x317/0x760 [5.607286] open_ctree+0xd9c/0x1710 [5.607509] btrfs_get_tree+0x58a/0x7e0 [5.608002] vfs_get_tree+0x2e/0x100 [5.608224] fc_mount+0x16/0x60 [5.608420] btrfs_get_tree+0x2f8/0x7e0 [5.608897] vfs_get_tree+0x2e/0x100 [5.609121] path_mount+0x4c8/0xbc0 [5.609538] __x64_sys_mount+0x10d/0x150 The issue can be easily reproduced using the following reproducer: root@q:linux# cat repro.sh set -e mkfs.btrfs -q -f /dev/sdb mount /dev/sdb /mnt/btrfs btrfs quota enable -s /mnt/btrfs umount /mnt/btrfs mount /dev/sdb /mnt/btrfs The issue is that when enabling quotas, at btrfs_quota_enable(), we set BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE at fs_info->qgroup_flags and persist it in the quota root in the item with the key BTRFS_QGROUP_STATUS_KEY, but we only set the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA after we commit the transaction used to enable simple quotas. This means that if after that transaction commit we unmount the filesystem without starting and committing any other transaction, or we have a power failure, the next time we mount the filesystem we will find the flag BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE set in the item with the key BTRFS_QGROUP_STATUS_KEY but we will not find the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA set in the superblock, triggering an assertion failure at: btrfs_read_qgroup_config() -> qgroup_read_enable_gen() To fix this issue, set the BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA flag immediately after setting the BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE. This ensures that both flags are flushed to disk within the same transaction.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs The driver, through the SAS transport, exposes a sysfs interface to enable/disable PHYs in a controller/expander setup. When multiple PHYs are disabled and enabled in rapid succession, the persistent and current config pages related to SAS IO unit/SAS Expander pages could get corrupted. Use separate memory for each config request.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix TCP options overflow. Syzbot reported the following splat: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 UID: 0 PID: 5836 Comm: sshd Not tainted 6.13.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:_compound_head include/linux/page-flags.h:242 [inline] RIP: 0010:put_page+0x23/0x260 include/linux/mm.h:1552 Code: 90 90 90 90 90 90 90 55 41 57 41 56 53 49 89 fe 48 bd 00 00 00 00 00 fc ff df e8 f8 5e 12 f8 49 8d 5e 08 48 89 d8 48 c1 e8 03 <80> 3c 28 00 74 08 48 89 df e8 8f c7 78 f8 48 8b 1b 48 89 de 48 83 RSP: 0000:ffffc90003916c90 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000008 RCX: ffff888030458000 RDX: 0000000000000100 RSI: 0000000000000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff898ca81d R09: 1ffff110054414ac R10: dffffc0000000000 R11: ffffed10054414ad R12: 0000000000000007 R13: ffff88802a20a542 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f34f496e800(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9d6ec9ec28 CR3: 000000004d260000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_page_unref include/linux/skbuff_ref.h:43 [inline] __skb_frag_unref include/linux/skbuff_ref.h:56 [inline] skb_release_data+0x483/0x8a0 net/core/skbuff.c:1119 skb_release_all net/core/skbuff.c:1190 [inline] __kfree_skb+0x55/0x70 net/core/skbuff.c:1204 tcp_clean_rtx_queue net/ipv4/tcp_input.c:3436 [inline] tcp_ack+0x2442/0x6bc0 net/ipv4/tcp_input.c:4032 tcp_rcv_state_process+0x8eb/0x44e0 net/ipv4/tcp_input.c:6805 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1939 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5672 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5785 process_backlog+0x662/0x15b0 net/core/dev.c:6117 __napi_poll+0xcb/0x490 net/core/dev.c:6883 napi_poll net/core/dev.c:6952 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:7074 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x57/0xc0 arch/x86/kernel/apic/apic.c:1049 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0033:0x7f34f4519ad5 Code: 85 d2 74 0d 0f 10 02 48 8d 54 24 20 0f 11 44 24 20 64 8b 04 25 18 00 00 00 85 c0 75 27 41 b8 08 00 00 00 b8 0f 01 00 00 0f 05 <48> 3d 00 f0 ff ff 76 75 48 8b 15 24 73 0d 00 f7 d8 64 89 02 48 83 RSP: 002b:00007ffec5b32ce0 EFLAGS: 00000246 RAX: 0000000000000001 RBX: 00000000000668a0 RCX: 00007f34f4519ad5 RDX: 00007ffec5b32d00 RSI: 0000000000000004 RDI: 0000564f4bc6cae0 RBP: 0000564f4bc6b5a0 R08: 0000000000000008 R09: 0000000000000000 R10: 00007ffec5b32de8 R11: 0000000000000246 R12: 0000564f48ea8aa4 R13: 0000000000000001 R14: 0000564f48ea93e8 R15: 00007ffec5b32d68 </TASK> Eric noted a probable shinfo->nr_frags corruption, which indeed occurs. The root cause is a buggy MPTCP option len computation in some circumstances: the ADD_ADDR option should be mutually exclusive with DSS since the blamed commit. Still, mptcp_established_options_add_addr() tries to set the relevant info in mptcp_out_options, if ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp Similar to the r_pipe sspp protect, add a check to protect the pipe state prints to avoid NULL ptr dereference for cases when the state is dumped without a corresponding atomic_check() where the pipe->sspp is assigned. Patchwork: https://patchwork.freedesktop.org/patch/628404/

Integer overflow in the oom_badness function in mm/oom_kill.c in the Linux kernel before 3.1.8 on 64-bit platforms allows local users to cause a denial of service (memory consumption or process termination) by using a certain large amount of memory.

net/ipv4/udp.c in the Linux kernel before 2.6.29.1 performs an unlocking step in certain incorrect circumstances, which allows local users to cause a denial of service (panic) by reading zero bytes from the /proc/net/udp file and unspecified other files, related to the "udp seq_file infrastructure."

In the Linux kernel, the following vulnerability has been resolved: mac802154: check local interfaces before deleting sdata list syzkaller reported a corrupted list in ieee802154_if_remove. [1] Remove an IEEE 802.15.4 network interface after unregister an IEEE 802.15.4 hardware device from the system. CPU0 CPU1 ==== ==== genl_family_rcv_msg_doit ieee802154_unregister_hw ieee802154_del_iface ieee802154_remove_interfaces rdev_del_virtual_intf_deprecated list_del(&sdata->list) ieee802154_if_remove list_del_rcu The net device has been unregistered, since the rcu grace period, unregistration must be run before ieee802154_if_remove. To avoid this issue, add a check for local->interfaces before deleting sdata list. [1] kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 6277 Comm: syz-executor157 Not tainted 6.12.0-rc6-syzkaller-00005-g557329bcecc2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__list_del_entry_valid_or_report+0xf4/0x140 lib/list_debug.c:56 Code: e8 a1 7e 00 07 90 0f 0b 48 c7 c7 e0 37 60 8c 4c 89 fe e8 8f 7e 00 07 90 0f 0b 48 c7 c7 40 38 60 8c 4c 89 fe e8 7d 7e 00 07 90 <0f> 0b 48 c7 c7 a0 38 60 8c 4c 89 fe e8 6b 7e 00 07 90 0f 0b 48 c7 RSP: 0018:ffffc9000490f3d0 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: d211eee56bb28d00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88805b278dd8 R08: ffffffff8174a12c R09: 1ffffffff2852f0d R10: dffffc0000000000 R11: fffffbfff2852f0e R12: dffffc0000000000 R13: dffffc0000000000 R14: dead000000000100 R15: ffff88805b278cc0 FS: 0000555572f94380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056262e4a3000 CR3: 0000000078496000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_rcu include/linux/rculist.h:157 [inline] ieee802154_if_remove+0x86/0x1e0 net/mac802154/iface.c:687 rdev_del_virtual_intf_deprecated net/ieee802154/rdev-ops.h:24 [inline] ieee802154_del_iface+0x2c0/0x5c0 net/ieee802154/nl-phy.c:323 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:744 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2607 ___sys_sendmsg net/socket.c:2661 [inline] __sys_sendmsg+0x292/0x380 net/socket.c:2690 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name() devm_kstrdup() can return a NULL pointer on failure,but this returned value in btbcm_get_board_name() is not checked. Add NULL check in btbcm_get_board_name(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: erofs: handle NONHEAD !delta[1] lclusters gracefully syzbot reported a WARNING in iomap_iter_done: iomap_fiemap+0x73b/0x9b0 fs/iomap/fiemap.c:80 ioctl_fiemap fs/ioctl.c:220 [inline] Generally, NONHEAD lclusters won't have delta[1]==0, except for crafted images and filesystems created by pre-1.0 mkfs versions. Previously, it would immediately bail out if delta[1]==0, which led to inadequate decompressed lengths (thus FIEMAP is impacted). Treat it as delta[1]=1 to work around these legacy mkfs versions. `lclusterbits > 14` is illegal for compact indexes, error out too.

In the Linux kernel, the following vulnerability has been resolved: ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow() There are code paths from which the function is called without holding the RCU read lock, resulting in a suspicious RCU usage warning [1]. Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire the RCU read lock before calling l3mdev_master_upper_ifindex_by_index_rcu(). [1] WARNING: suspicious RCU usage 6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted ----------------------------- net/core/dev.c:876 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/361: #0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60 stack backtrace: CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0xba/0x110 lockdep_rcu_suspicious.cold+0x4f/0xd6 dev_get_by_index_rcu+0x1d3/0x210 l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0 ip_tunnel_bind_dev+0x72f/0xa00 ip_tunnel_newlink+0x368/0x7a0 ipgre_newlink+0x14c/0x170 __rtnl_newlink+0x1173/0x19c0 rtnl_newlink+0x6c/0xa0 rtnetlink_rcv_msg+0x3cc/0xf60 netlink_rcv_skb+0x171/0x450 netlink_unicast+0x539/0x7f0 netlink_sendmsg+0x8c1/0xd80 ____sys_sendmsg+0x8f9/0xc20 ___sys_sendmsg+0x197/0x1e0 __sys_sendmsg+0x122/0x1f0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: afs: Fix lock recursion afs_wake_up_async_call() can incur lock recursion. The problem is that it is called from AF_RXRPC whilst holding the ->notify_lock, but it tries to take a ref on the afs_call struct in order to pass it to a work queue - but if the afs_call is already queued, we then have an extraneous ref that must be put... calling afs_put_call() may call back down into AF_RXRPC through rxrpc_kernel_shutdown_call(), however, which might try taking the ->notify_lock again. This case isn't very common, however, so defer it to a workqueue. The oops looks something like: BUG: spinlock recursion on CPU#0, krxrpcio/7001/1646 lock: 0xffff888141399b30, .magic: dead4ead, .owner: krxrpcio/7001/1646, .owner_cpu: 0 CPU: 0 UID: 0 PID: 1646 Comm: krxrpcio/7001 Not tainted 6.12.0-rc2-build3+ #4351 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Call Trace: <TASK> dump_stack_lvl+0x47/0x70 do_raw_spin_lock+0x3c/0x90 rxrpc_kernel_shutdown_call+0x83/0xb0 afs_put_call+0xd7/0x180 rxrpc_notify_socket+0xa0/0x190 rxrpc_input_split_jumbo+0x198/0x1d0 rxrpc_input_data+0x14b/0x1e0 ? rxrpc_input_call_packet+0xc2/0x1f0 rxrpc_input_call_event+0xad/0x6b0 rxrpc_input_packet_on_conn+0x1e1/0x210 rxrpc_input_packet+0x3f2/0x4d0 rxrpc_io_thread+0x243/0x410 ? __pfx_rxrpc_io_thread+0x10/0x10 kthread+0xcf/0xe0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x24/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Disable works on hci_unregister_dev This make use of disable_work_* on hci_unregister_dev since the hci_dev is about to be freed new submissions are not disarable.

The inotify_read function in the Linux kernel 2.6.27 to 2.6.27.13, 2.6.28 to 2.6.28.2, and 2.6.29-rc3 allows local users to cause a denial of service (OOPS) via a read with an invalid address to an inotify instance, which causes the device's event list mutex to be unlocked twice and prevents proper synchronization of a data structure for the inotify instance.

In the Linux kernel, the following vulnerability has been resolved: jfs: add check read-only before txBeginAnon() call Added a read-only check before calling `txBeginAnon` in `extAlloc` and `extRecord`. This prevents modification attempts on a read-only mounted filesystem, avoiding potential errors or crashes. Call trace: txBeginAnon+0xac/0x154 extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78 jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248 __block_write_begin_int+0x580/0x166c fs/buffer.c:2128 __block_write_begin fs/buffer.c:2177 [inline] block_write_begin+0x98/0x11c fs/buffer.c:2236 jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Cleanup global '__scm' on probe failures If SCM driver fails the probe, it should not leave global '__scm' variable assigned, because external users of this driver will assume the probe finished successfully. For example TZMEM parts ('__scm->mempool') are initialized later in the probe, but users of it (__scm_smc_call()) rely on the '__scm' variable. This fixes theoretical NULL pointer exception, triggered via introducing probe deferral in SCM driver with call trace: qcom_tzmem_alloc+0x70/0x1ac (P) qcom_tzmem_alloc+0x64/0x1ac (L) qcom_scm_assign_mem+0x78/0x194 qcom_rmtfs_mem_probe+0x2d4/0x38c platform_probe+0x68/0xc8

In the Linux kernel, the following vulnerability has been resolved: af_packet: fix vlan_get_tci() vs MSG_PEEK Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot. Rework vlan_get_tci() to not touch skb at all, so that it can be used from many cpus on the same skb. Add a const qualifier to skb argument. [1] skbuff: skb_under_panic: text:ffffffff8a8da482 len:32 put:14 head:ffff88807a1d5800 data:ffff88807a1d5810 tail:0x14 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 5880 Comm: syz-executor172 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0b 8d 48 c7 c6 9e 6c 26 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 3a 5a 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90003baf5b8 EFLAGS: 00010286 RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 8565c1eec37aa000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88802616fb50 R08: ffffffff817f0a4c R09: 1ffff92000775e50 R10: dffffc0000000000 R11: fffff52000775e51 R12: 0000000000000140 R13: ffff88807a1d5800 R14: ffff88807a1d5810 R15: 0000000000000014 FS: 00007fa03261f6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd65753000 CR3: 0000000031720000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 vlan_get_tci+0x272/0x550 net/packet/af_packet.c:565 packet_recvmsg+0x13c9/0x1ef0 net/packet/af_packet.c:3616 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1066 ____sys_recvmsg+0x1c6/0x480 net/socket.c:2814 ___sys_recvmsg net/socket.c:2856 [inline] do_recvmmsg+0x426/0xab0 net/socket.c:2951 __sys_recvmmsg net/socket.c:3025 [inline] __do_sys_recvmmsg net/socket.c:3048 [inline] __se_sys_recvmmsg net/socket.c:3041 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3041 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_set_pipapo: fix initial map fill The initial buffer has to be inited to all-ones, but it must restrict it to the size of the first field, not the total field size. After each round in the map search step, the result and the fill map are swapped, so if we have a set where f->bsize of the first element is smaller than m->bsize_max, those one-bits are leaked into future rounds result map. This makes pipapo find an incorrect matching results for sets where first field size is not the largest. Followup patch adds a test case to nft_concat_range.sh selftest script. Thanks to Stefano Brivio for pointing out that we need to zero out the remainder explicitly, only correcting memset() argument isn't enough.

The Performance Events subsystem in the Linux kernel before 3.1 does not properly handle event overflows associated with PERF_COUNT_SW_CPU_CLOCK events, which allows local users to cause a denial of service (system hang) via a crafted application.

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool() Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization") introduced a write barrier in probe function to store global '__scm' variable. We all known barriers are paired (see memory-barriers.txt: "Note that write barriers should normally be paired with read or address-dependency barriers"), therefore accessing it from concurrent contexts requires read barrier. Previous commit added such barrier in qcom_scm_is_available(), so let's use that directly. Lack of this read barrier can result in fetching stale '__scm' variable value, NULL, and dereferencing it. Note that barrier in qcom_scm_is_available() satisfies here the control dependency.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add check for granularity in dml ceil/floor helpers [Why] Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2() should check for granularity is non zero to avoid assert and divide-by-zero error in dcn_bw_ functions. [How] Add check for granularity 0. (cherry picked from commit f6e09701c3eb2ccb8cb0518e0b67f1c69742a4ec)