In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common In order to set the rate range of a hw sunxi_ccu_probe calls hw_to_ccu_common() assuming all entries in desc->ccu_clks are contained in a ccu_common struct. This assumption is incorrect and, in consequence, causes invalid pointer de-references. Remove the faulty call. Instead, add one more loop that iterates over the ccu_clks and sets the rate range, if required.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Avoid null pointer dereference in region lookup cxl_dpa_to_region() looks up a region based on a memdev and DPA. It wrongly assumes an endpoint found mapping the DPA is also of a fully assembled region. When not true it leads to a null pointer dereference looking up the region name. This appears during testing of region lookup after a failure to assemble a BIOS defined region or if the lookup raced with the assembly of the BIOS defined region. Failure to clean up BIOS defined regions that fail assembly is an issue in itself and a fix to that problem will alleviate some of the impact. It will not alleviate the race condition so let's harden this path. The behavior change is that the kernel oops due to a null pointer dereference is replaced with a dev_dbg() message noting that an endpoint was mapped. Additional comments are added so that future users of this function can more clearly understand what it provides.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: discard write access to the directory open may_open() does not allow a directory to be opened with the write access. However, some writing flags set by client result in adding write access on server, making ksmbd incompatible with FUSE file system. Simply, let's discard the write access when opening a directory. list_add corruption. next is NULL. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:26! pc : __list_add_valid+0x88/0xbc lr : __list_add_valid+0x88/0xbc Call trace: __list_add_valid+0x88/0xbc fuse_finish_open+0x11c/0x170 fuse_open_common+0x284/0x5e8 fuse_dir_open+0x14/0x24 do_dentry_open+0x2a4/0x4e0 dentry_open+0x50/0x80 smb2_open+0xbe4/0x15a4 handle_ksmbd_work+0x478/0x5ec process_one_work+0x1b4/0x448 worker_thread+0x25c/0x430 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_ld_modes In nv17_tv_get_ld_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors input_action_end_dx4() and input_action_end_dx6() are called NF_HOOK() for PREROUTING hook, in PREROUTING hook, we should passing a valid indev, and a NULL outdev to NF_HOOK(), otherwise may trigger a NULL pointer dereference, as below: [74830.647293] BUG: kernel NULL pointer dereference, address: 0000000000000090 [74830.655633] #PF: supervisor read access in kernel mode [74830.657888] #PF: error_code(0x0000) - not-present page [74830.659500] PGD 0 P4D 0 [74830.660450] Oops: 0000 [#1] PREEMPT SMP PTI ... [74830.664953] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [74830.666569] RIP: 0010:rpfilter_mt+0x44/0x15e [ipt_rpfilter] ... [74830.689725] Call Trace: [74830.690402] <IRQ> [74830.690953] ? show_trace_log_lvl+0x1c4/0x2df [74830.692020] ? show_trace_log_lvl+0x1c4/0x2df [74830.693095] ? ipt_do_table+0x286/0x710 [ip_tables] [74830.694275] ? __die_body.cold+0x8/0xd [74830.695205] ? page_fault_oops+0xac/0x140 [74830.696244] ? exc_page_fault+0x62/0x150 [74830.697225] ? asm_exc_page_fault+0x22/0x30 [74830.698344] ? rpfilter_mt+0x44/0x15e [ipt_rpfilter] [74830.699540] ipt_do_table+0x286/0x710 [ip_tables] [74830.700758] ? ip6_route_input+0x19d/0x240 [74830.701752] nf_hook_slow+0x3f/0xb0 [74830.702678] input_action_end_dx4+0x19b/0x1e0 [74830.703735] ? input_action_end_t+0xe0/0xe0 [74830.704734] seg6_local_input_core+0x2d/0x60 [74830.705782] lwtunnel_input+0x5b/0xb0 [74830.706690] __netif_receive_skb_one_core+0x63/0xa0 [74830.707825] process_backlog+0x99/0x140 [74830.709538] __napi_poll+0x2c/0x160 [74830.710673] net_rx_action+0x296/0x350 [74830.711860] __do_softirq+0xcb/0x2ac [74830.713049] do_softirq+0x63/0x90 input_action_end_dx4() passing a NULL indev to NF_HOOK(), and finally trigger a NULL dereference in rpfilter_mt()->rpfilter_is_loopback(): static bool rpfilter_is_loopback(const struct sk_buff *skb, const struct net_device *in) { // in is NULL return skb->pkt_type == PACKET_LOOPBACK || in->flags & IFF_LOOPBACK; }

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix NULL pointer dereference in gfs2_log_flush In gfs2_jindex_free(), set sdp->sd_jdesc to NULL under the log flush lock to provide exclusion against gfs2_log_flush(). In gfs2_log_flush(), check if sdp->sd_jdesc is non-NULL before dereferencing it. Otherwise, we could run into a NULL pointer dereference when outstanding glock work races with an unmount (glock_work_func -> run_queue -> do_xmote -> inode_go_sync -> gfs2_log_flush).

In the Linux kernel, the following vulnerability has been resolved: net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool() Clang static checker (scan-build) warning: net/ethtool/ioctl.c:line 2233, column 2 Called function pointer is null (null dereference). Return '-EOPNOTSUPP' when 'ops->get_ethtool_phy_stats' is NULL to fix this typo error.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix possible double free in error handling path When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function adev_release calls kfree(madev). We shouldn't call kfree(madev) again in the error handling path. Set 'madev' to NULL.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix ufshcd_abort_one racing issue When ufshcd_abort_one is racing with the completion ISR, the completed tag of the request's mq_hctx pointer will be set to NULL by ISR. Return success when request is completed by ISR because ufshcd_abort_one does not need to do anything. The racing flow is: Thread A ufshcd_err_handler step 1 ... ufshcd_abort_one ufshcd_try_to_abort_task ufshcd_cmd_inflight(true) step 3 ufshcd_mcq_req_to_hwq blk_mq_unique_tag rq->mq_hctx->queue_num step 5 Thread B ufs_mtk_mcq_intr(cq complete ISR) step 2 scsi_done ... __blk_mq_free_request rq->mq_hctx = NULL; step 4 Below is KE back trace. ufshcd_try_to_abort_task: cmd at tag 41 not pending in the device. ufshcd_try_to_abort_task: cmd at tag=41 is cleared. Aborting tag 41 / CDB 0x28 succeeded Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194 pc : [0xffffffddd7a79bf8] blk_mq_unique_tag+0x8/0x14 lr : [0xffffffddd6155b84] ufshcd_mcq_req_to_hwq+0x1c/0x40 [ufs_mediatek_mod_ise] do_mem_abort+0x58/0x118 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x54/0x90 el1h_64_sync+0x68/0x6c blk_mq_unique_tag+0x8/0x14 ufshcd_err_handler+0xae4/0xfa8 [ufs_mediatek_mod_ise] process_one_work+0x208/0x4fc worker_thread+0x228/0x438 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind() The cs35l41_hda_unbind() function clears the hda_component entry matching it's index and then dereferences the codec pointer held in the first element of the hda_component array, this is an issue when the device index was 0. Instead use the codec pointer stashed in the cs35l41_hda structure as it will still be valid.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible NULL dereference in rt6_probe() syzbot caught a NULL dereference in rt6_probe() [1] Bail out if __in6_dev_get() returns NULL. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cb: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000658-0x000000000000065f] CPU: 1 PID: 22444 Comm: syz-executor.0 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381d4e2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 RIP: 0010:rt6_probe net/ipv6/route.c:656 [inline] RIP: 0010:find_match+0x8c4/0xf50 net/ipv6/route.c:758 Code: 14 fd f7 48 8b 85 38 ff ff ff 48 c7 45 b0 00 00 00 00 48 8d b8 5c 06 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 19 RSP: 0018:ffffc900034af070 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004521000 RDX: 00000000000000cb RSI: ffffffff8990d0cd RDI: 000000000000065c RBP: ffffc900034af150 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000002 R12: 000000000000000a R13: 1ffff92000695e18 R14: ffff8880244a1d20 R15: 0000000000000000 FS: 00007f4844a5a6c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31b27000 CR3: 000000002d42c000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rt6_nh_find_match+0xfa/0x1a0 net/ipv6/route.c:784 nexthop_for_each_fib6_nh+0x26d/0x4a0 net/ipv4/nexthop.c:1496 __find_rr_leaf+0x6e7/0xe00 net/ipv6/route.c:825 find_rr_leaf net/ipv6/route.c:853 [inline] rt6_select net/ipv6/route.c:897 [inline] fib6_table_lookup+0x57e/0xa30 net/ipv6/route.c:2195 ip6_pol_route+0x1cd/0x1150 net/ipv6/route.c:2231 pol_lookup_func include/net/ip6_fib.h:616 [inline] fib6_rule_lookup+0x386/0x720 net/ipv6/fib6_rules.c:121 ip6_route_output_flags_noref net/ipv6/route.c:2639 [inline] ip6_route_output_flags+0x1d0/0x640 net/ipv6/route.c:2651 ip6_dst_lookup_tail.constprop.0+0x961/0x1760 net/ipv6/ip6_output.c:1147 ip6_dst_lookup_flow+0x99/0x1d0 net/ipv6/ip6_output.c:1250 rawv6_sendmsg+0xdab/0x4340 net/ipv6/raw.c:898 inet_sendmsg+0x119/0x140 net/ipv4/af_inet.c:853 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_write_iter+0x4b8/0x5c0 net/socket.c:1160 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x6b6/0x1140 fs/read_write.c:590 ksys_write+0x1f8/0x260 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: eventfs: Fix a possible null pointer dereference in eventfs_find_events() In function eventfs_find_events,there is a potential null pointer that may be caused by calling update_events_attr which will perform some operations on the members of the ei struct when ei is NULL. Hence,When ei->is_freed is set,return NULL directly.

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/qcom/lmh: Check for SCM availability at probe Up until now, the necessary scm availability check has not been performed, leading to possible null pointer dereferences (which did happen for me on RB1). Fix that.

In the Linux kernel, the following vulnerability has been resolved: drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2 [Why] Commit: - commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") accidently overwrite the commit - commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2") which cause regression. [How] Recover the original NULL fix and remove the unnecessary input parameter 'state' for drm_dp_add_payload_part2(). (cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305)

In the Linux kernel, the following vulnerability has been resolved: liquidio: Adjust a NULL pointer handling path in lio_vf_rep_copy_packet In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value, but then it is unconditionally passed to skb_add_rx_frag() which looks strange and could lead to null pointer dereference. lio_vf_rep_copy_packet() call trace looks like: octeon_droq_process_packets octeon_droq_fast_process_packets octeon_droq_dispatch_pkt octeon_create_recv_info ...search in the dispatch_list... ->disp_fn(rdisp->rinfo, ...) lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...) In this path there is no code which sets pg_info->page to NULL. So this check looks unneeded and doesn't solve potential problem. But I guess the author had reason to add a check and I have no such card and can't do real test. In addition, the code in the function liquidio_push_packet() in liquidio/lio_core.c does exactly the same. Based on this, I consider the most acceptable compromise solution to adjust this issue by moving skb_add_rx_frag() into conditional scope. Found by Linux Verification Center (linuxtesting.org) with SVACE.

kernel/trace/ftrace.c in the Linux kernel before 2.6.35.5, when debugfs is enabled, does not properly handle interaction between mutex possession and llseek operations, which allows local users to cause a denial of service (NULL pointer dereference and outage of all function tracing files) via an lseek call on a file descriptor associated with the set_ftrace_filter file.

In the Linux kernel, the following vulnerability has been resolved: drm/komeda: check for error-valued pointer komeda_pipeline_get_state() may return an error-valued pointer, thus check the pointer for negative or null value before dereferencing.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: validate mandatory meta and payload Check for mandatory netlink attributes in payload and meta expression when used embedded from the inner expression, otherwise NULL pointer dereference is possible from userspace.

In the Linux kernel, the following vulnerability has been resolved: serial: max3100: Update uart_driver_registered on driver removal The removal of the last MAX3100 device triggers the removal of the driver. However, code doesn't update the respective global variable and after insmod — rmmod — insmod cycle the kernel oopses: max3100 spi-PRP0001:01: max3100_probe: adding port 0 BUG: kernel NULL pointer dereference, address: 0000000000000408 ... RIP: 0010:serial_core_register_port+0xa0/0x840 ... max3100_probe+0x1b6/0x280 [max3100] spi_probe+0x8d/0xb0 Update the actual state so next time UART driver will be registered again. Hugo also noticed, that the error path in the probe also affected by having the variable set, and not cleared. Instead of clearing it move the assignment after the successfull uart_register_driver() call.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: exit() callback is optional The exit() callback is optional and shouldn't be called without checking a valid pointer first. Also, we must clear freq_table pointer even if the exit() callback isn't present.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: check for null before dereferencing The wcid can be NULL. It should be checked for validity before dereferencing it to avoid crash.

In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe() In the prueth_probe() function, if one of the calls to emac_phy_connect() fails due to of_phy_connect() returning NULL, then the subsequent call to phy_attached_info() will dereference a NULL pointer. Check the return code of emac_phy_connect and fail cleanly if there is an error.

In the Linux kernel, the following vulnerability has been resolved: drm: bridge: cdns-mhdp8546: Fix possible null pointer dereference In cdns_mhdp_atomic_enable(), the return value of drm_mode_duplicate() is assigned to mhdp_state->current_mode, and there is a dereference of it in drm_mode_set_name(), which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Fix this bug add a check of mhdp_state->current_mode.

In the Linux kernel, the following vulnerability has been resolved: greybus: lights: check return of get_channel_from_mode If channel for the given node is not found we return null from get_channel_from_mode. Make sure we validate the return pointer before using it in two of the missing places. This was originally reported in [0]: Found by Linux Verification Center (linuxtesting.org) with SVACE. [0] https://lore.kernel.org/all/20240301190425.120605-1-m.lobanov@rosalinux.ru

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix netif state handling mlx5e_suspend cleans resources only if netif_device_present() returns true. However, mlx5e_resume changes the state of netif, via mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED. In the below case, the above leads to NULL-ptr Oops[1] and memory leaks: mlx5e_probe _mlx5e_resume mlx5e_attach_netdev mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach() register_netdev <-- failed for some reason. ERROR_FLOW: _mlx5e_suspend <-- netif_device_present return false, resources aren't freed :( Hence, clean resources in this case as well. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at0xffffffffffffffd6. RSP: 0018:ffff888178aaf758 EFLAGS: 00010246 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x14c/0x3c0 ? exc_page_fault+0x75/0x140 ? asm_exc_page_fault+0x22/0x30 notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core] mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib] mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib] __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe1/0x210 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x637/0x840 __auxiliary_device_add+0x3b/0xa0 add_adev+0xc9/0x140 [mlx5_core] mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core] mlx5_register_device+0x53/0xa0 [mlx5_core] mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x44c/0x730 [mlx5_core] local_pci_probe+0x3e/0x90 pci_device_probe+0xbf/0x210 ? kernfs_create_link+0x5d/0xa0 ? sysfs_do_create_link_sd+0x60/0xc0 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 pci_bus_add_device+0x54/0x80 pci_iov_add_virtfn+0x2e6/0x320 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 kernfs_fop_write_iter+0x10c/0x1a0 vfs_write+0x291/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 CR2: 0000000000000000 ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: libbpf: Prevent null-pointer dereference when prog to load has no BTF In bpf_objec_load_prog(), there's no guarantee that obj->btf is non-NULL when passing it to btf__fd(), and this function does not perform any check before dereferencing its argument (as bpf_object__btf_fd() used to do). As a consequence, we get segmentation fault errors in bpftool (for example) when trying to load programs that come without BTF information. v2: Keep btf__fd() in the fix instead of reverting to bpf_object__btf_fd().

In the Linux kernel, the following vulnerability has been resolved: drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails Calling a6xx_destroy() before adreno_gpu_init() leads to a null pointer dereference on: msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL); as gpu->pdev is only assigned in: a6xx_gpu_init() |_ adreno_gpu_init |_ msm_gpu_init() Instead of relying on handwavy null checks down the cleanup chain, explicitly de-allocate the LLC data and free a6xx_gpu instead. Patchwork: https://patchwork.freedesktop.org/patch/588919/

In the Linux kernel, the following vulnerability has been resolved: drm: vc4: Fix possible null pointer dereference In vc4_hdmi_audio_init() of_get_address() may return NULL which is later dereferenced. Fix this bug by adding NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Check 'folio' pointer for NULL It can be NULL if bmap is called.

In the Linux kernel, the following vulnerability has been resolved: media: atomisp: ssh_css: Fix a null-pointer dereference in load_video_binaries The allocation failure of mycs->yuv_scaler_binary in load_video_binaries() is followed with a dereference of mycs->yuv_scaler_binary after the following call chain: sh_css_pipe_load_binaries() |-> load_video_binaries(mycs->yuv_scaler_binary == NULL) | |-> sh_css_pipe_unload_binaries() |-> unload_video_binaries() In unload_video_binaries(), it calls to ia_css_binary_unload with argument &pipe->pipe_settings.video.yuv_scaler_binary[i], which refers to the same memory slot as mycs->yuv_scaler_binary. Thus, a null-pointer dereference is triggered.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add callback function pointer check before its call In dpu_core_irq_callback_handler() callback function pointer is compared to NULL, but then callback function is unconditionally called by this pointer. Fix this bug by adding conditional return. Found by Linux Verification Center (linuxtesting.org) with SVACE. Patchwork: https://patchwork.freedesktop.org/patch/588237/

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tsens: Fix null pointer dereference compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c) as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null pointer dereference (if DEBUG or DYNAMIC_DEBUG set). Fix this bug by adding null pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: pcie: handle randbuf allocation failure The kzalloc() in brcmf_pcie_download_fw_nvram() will return null if the physical memory has run out. As a result, if we use get_random_bytes() to generate random bytes in the randbuf, the null pointer dereference bug will happen. In order to prevent allocation failure, this patch adds a separate function using buffer on kernel stack to generate random bytes in the randbuf, which could prevent the kernel stack from overflow.

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe() A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could possibly return NULL pointer. NULL Pointer Dereference may be triggerred without addtional check. Add a NULL check for the returned pointer.

In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix shrinker NULL crash with cgroup_disable=memory Christian reports a NULL deref in zswap that he bisected down to the zswap shrinker. The issue also cropped up in the bug trackers of libguestfs [1] and the Red Hat bugzilla [2]. The problem is that when memcg is disabled with the boot time flag, the zswap shrinker might get called with sc->memcg == NULL. This is okay in many places, like the lruvec operations. But it crashes in memcg_page_state() - which is only used due to the non-node accounting of cgroup's the zswap memory to begin with. Nhat spotted that the memcg can be NULL in the memcg-disabled case, and I was then able to reproduce the crash locally as well. [1] https://github.com/libguestfs/libguestfs/issues/139 [2] https://bugzilla.redhat.com/show_bug.cgi?id=2275252

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Use the correct type in nvidia_smmu_context_fault() This was missed because of the function pointer indirection. nvidia_smmu_context_fault() is also installed as a irq function, and the 'void *' was changed to a struct arm_smmu_domain. Since the iommu_domain is embedded at a non-zero offset this causes nvidia_smmu_context_fault() to miscompute the offset. Fixup the types. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107c9f000 [0000000000000120] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 1 PID: 47 Comm: kworker/u25:0 Not tainted 6.9.0-0.rc7.58.eln136.aarch64 #1 Hardware name: Unknown NVIDIA Jetson Orin NX/NVIDIA Jetson Orin NX, BIOS 3.1-32827747 03/19/2023 Workqueue: events_unbound deferred_probe_work_func pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : nvidia_smmu_context_fault+0x1c/0x158 lr : __free_irq+0x1d4/0x2e8 sp : ffff80008044b6f0 x29: ffff80008044b6f0 x28: ffff000080a60b18 x27: ffffd32b5172e970 x26: 0000000000000000 x25: ffff0000802f5aac x24: ffff0000802f5a30 x23: ffff0000802f5b60 x22: 0000000000000057 x21: 0000000000000000 x20: ffff0000802f5a00 x19: ffff000087d4cd80 x18: ffffffffffffffff x17: 6234362066666666 x16: 6630303078302d30 x15: ffff00008156d888 x14: 0000000000000000 x13: ffff0000801db910 x12: ffff00008156d6d0 x11: 0000000000000003 x10: ffff0000801db918 x9 : ffffd32b50f94d9c x8 : 1fffe0001032fda1 x7 : ffff00008197ed00 x6 : 000000000000000f x5 : 000000000000010e x4 : 000000000000010e x3 : 0000000000000000 x2 : ffffd32b51720cd8 x1 : ffff000087e6f700 x0 : 0000000000000057 Call trace: nvidia_smmu_context_fault+0x1c/0x158 __free_irq+0x1d4/0x2e8 free_irq+0x3c/0x80 devm_free_irq+0x64/0xa8 arm_smmu_domain_free+0xc4/0x158 iommu_domain_free+0x44/0xa0 iommu_deinit_device+0xd0/0xf8 __iommu_group_remove_device+0xcc/0xe0 iommu_bus_notifier+0x64/0xa8 notifier_call_chain+0x78/0x148 blocking_notifier_call_chain+0x4c/0x90 bus_notify+0x44/0x70 device_del+0x264/0x3e8 pci_remove_bus_device+0x84/0x120 pci_remove_root_bus+0x5c/0xc0 dw_pcie_host_deinit+0x38/0xe0 tegra_pcie_config_rp+0xc0/0x1f0 tegra_pcie_dw_probe+0x34c/0x700 platform_probe+0x70/0xe8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x160 driver_probe_device+0x44/0x130 __device_attach_driver+0xc4/0x170 bus_for_each_drv+0x90/0x100 __device_attach+0xa8/0x1c8 device_initial_probe+0x1c/0x30 bus_probe_device+0xb0/0xc0 deferred_probe_work_func+0xbc/0x120 process_one_work+0x194/0x490 worker_thread+0x284/0x3b0 kthread+0xf4/0x108 ret_from_fork+0x10/0x20 Code: a9b97bfd 910003fd a9025bf5 f85a0035 (b94122a1)

In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() It was possible to have pick_eevdf() return NULL, which then causes a NULL-deref. This turned out to be due to entity_eligible() returning falsely negative because of a s64 multiplcation overflow. Specifically, reweight_eevdf() computes the vlag without considering the limit placed upon vlag as update_entity_lag() does, and then the scaling multiplication (remember that weight is 20bit fixed point) can overflow. This then leads to the new vruntime being weird which then causes the above entity_eligible() to go side-ways and claim nothing is eligible. Thus limit the range of vlag accordingly. All this was quite rare, but fatal when it does happen.

In the Linux kernel, the following vulnerability has been resolved: gso: fix udp gso fraglist segmentation after pull from frag_list Detect gso fraglist skbs with corrupted geometry (see below) and pass these to skb_segment instead of skb_segment_list, as the first can segment them correctly. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify these skbs, breaking these invariants. In extreme cases they pull all data into skb linear. For UDP, this causes a NULL ptr deref in __udpv4_gso_segment_list_csum at udp_hdr(seg->next)->dest. Detect invalid geometry due to pull, by checking head_skb size. Don't just drop, as this may blackhole a destination. Convert to be able to pass to regular skb_segment.

In the Linux kernel, the following vulnerability has been resolved: net: core: reject skb_copy(_expand) for fraglist GSO skbs SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become invalid. Return NULL if such an skb is passed to skb_copy or skb_copy_expand, in order to prevent a crash on a potential later call to skb_gso_segment.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NULL-deref on non-serdev suspend Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when wakeup() is called for a non-serdev controller during suspend. Just return true for now to restore the original behaviour and address the crash with pre-6.2 kernels, which do not have commit e9b3e5b8c657 ("Bluetooth: hci_qca: only assign wakeup with serial port support") that causes the crash to happen already at setup() time.

In the Linux kernel, the following vulnerability has been resolved: ipv4: check for NULL idev in ip_route_use_hint() syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199

In the Linux kernel, the following vulnerability has been resolved: Julia Lawall reported this null pointer dereference, this should fix it.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Atom Integrated System Info v2_2 for DCN35 New request from KMD/VBIOS in order to support new UMA carveout model. This fixes a null dereference from accessing Ctx->dc_bios->integrated_info while it was NULL. DAL parses through the BIOS and extracts the necessary integrated_info but was missing a case for the new BIOS version 2.3.

In the Linux kernel, the following vulnerability has been resolved: null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues' Writing 'power' and 'submit_queues' concurrently will trigger kernel panic: Test script: modprobe null_blk nr_devices=0 mkdir -p /sys/kernel/config/nullb/nullb0 while true; do echo 1 > submit_queues; echo 4 > submit_queues; done & while true; do echo 1 > power; echo 0 > power; done Test result: BUG: kernel NULL pointer dereference, address: 0000000000000148 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:__lock_acquire+0x41d/0x28f0 Call Trace: <TASK> lock_acquire+0x121/0x450 down_write+0x5f/0x1d0 simple_recursive_removal+0x12f/0x5c0 blk_mq_debugfs_unregister_hctxs+0x7c/0x100 blk_mq_update_nr_hw_queues+0x4a3/0x720 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x79/0xf0 [null_blk] configfs_write_iter+0x119/0x1e0 vfs_write+0x326/0x730 ksys_write+0x74/0x150 This is because del_gendisk() can concurrent with blk_mq_update_nr_hw_queues(): nullb_device_power_store nullb_apply_submit_queues null_del_dev del_gendisk nullb_update_nr_hw_queues if (!dev->nullb) // still set while gendisk is deleted return 0 blk_mq_update_nr_hw_queues dev->nullb = NULL Fix this problem by resuing the global mutex to protect nullb_device_power_store() and nullb_update_nr_hw_queues() from configfs.

In the Linux kernel, the following vulnerability has been resolved: tls: fix missing memory barrier in tls_init In tls_init(), a write memory barrier is missing, and store-store reordering may cause NULL dereference in tls_{setsockopt,getsockopt}. CPU0 CPU1 ----- ----- // In tls_init() // In tls_ctx_create() ctx = kzalloc() ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1) // In update_sk_prot() WRITE_ONCE(sk->sk_prot, tls_prots) -(2) // In sock_common_setsockopt() READ_ONCE(sk->sk_prot)->setsockopt() // In tls_{setsockopt,getsockopt}() ctx->sk_proto->setsockopt() -(3) In the above scenario, when (1) and (2) are reordered, (3) can observe the NULL value of ctx->sk_proto, causing NULL dereference. To fix it, we rely on rcu_assign_pointer() which implies the release barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is initialized, we can ensure that ctx->sk_proto are visible when changing sk->sk_prot.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr() vgic_v2_parse_attr() is responsible for finding the vCPU that matches the user-provided CPUID, which (of course) may not be valid. If the ID is invalid, kvm_get_vcpu_by_id() returns NULL, which isn't handled gracefully. Similar to the GICv3 uaccess flow, check that kvm_get_vcpu_by_id() actually returns something and fail the ioctl if not.

In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Fix bpf_plt pointer arithmetic Kui-Feng Lee reported a crash on s390x triggered by the dummy_st_ops/dummy_init_ptr_arg test [1]: [<0000000000000002>] 0x2 [<00000000009d5cde>] bpf_struct_ops_test_run+0x156/0x250 [<000000000033145a>] __sys_bpf+0xa1a/0xd00 [<00000000003319dc>] __s390x_sys_bpf+0x44/0x50 [<0000000000c4382c>] __do_syscall+0x244/0x300 [<0000000000c59a40>] system_call+0x70/0x98 This is caused by GCC moving memcpy() after assignments in bpf_jit_plt(), resulting in NULL pointers being written instead of the return and the target addresses. Looking at the GCC internals, the reordering is allowed because the alias analysis thinks that the memcpy() destination and the assignments' left-hand-sides are based on different objects: new_plt and bpf_plt_ret/bpf_plt_target respectively, and therefore they cannot alias. This is in turn due to a violation of the C standard: When two pointers are subtracted, both shall point to elements of the same array object, or one past the last element of the array object ... From the C's perspective, bpf_plt_ret and bpf_plt are distinct objects and cannot be subtracted. In the practical terms, doing so confuses the GCC's alias analysis. The code was written this way in order to let the C side know a few offsets defined in the assembly. While nice, this is by no means necessary. Fix the noncompliance by hardcoding these offsets. [1] https://lore.kernel.org/bpf/c9923c1d-971d-4022-8dc8-1364e929d34c@gmail.com/

In the Linux kernel, the following vulnerability has been resolved: selinux: avoid dereference of garbage after mount failure In case kern_mount() fails and returns an error pointer return in the error branch instead of continuing and dereferencing the error pointer. While on it drop the never read static variable selinuxfs_mount.

In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix null pointer dereference when IPv6 is not enabled When we try to add an IPv6 nexthop and IPv6 is not enabled (!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug has been present since the beginning of IPv6 nexthop gateway support. Commit 1aefd3de7bc6 ("ipv6: Add fib6_nh_init and release to stubs") tells us that only fib6_nh_init has a dummy stub because fib6_nh_release should not be called if fib6_nh_init returns an error, but the commit below added a call to ipv6_stub->fib6_nh_release in its error path. To fix it return the dummy stub's -EAFNOSUPPORT error directly without calling ipv6_stub->fib6_nh_release in nh_create_ipv6()'s error path. [1] Output is a bit truncated, but it clearly shows the error. BUG: kernel NULL pointer dereference, address: 000000000000000000 #PF: supervisor instruction fetch in kernel modede #PF: error_code(0x0010) - not-present pagege PGD 0 P4D 0 Oops: 0010 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 638 Comm: ip Kdump: loaded Not tainted 5.16.0-rc1+ #446 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888109f5b8f0 EFLAGS: 00010286^Ac RAX: 0000000000000000 RBX: ffff888109f5ba28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8881008a2860 RBP: ffff888109f5b9d8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff888109f5b978 R11: ffff888109f5b948 R12: 00000000ffffff9f R13: ffff8881008a2a80 R14: ffff8881008a2860 R15: ffff8881008a2840 FS: 00007f98de70f100(0000) GS:ffff88822bf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000100efc000 CR4: 00000000000006e0 Call Trace: <TASK> nh_create_ipv6+0xed/0x10c rtm_new_nexthop+0x6d7/0x13f3 ? check_preemption_disabled+0x3d/0xf2 ? lock_is_held_type+0xbe/0xfd rtnetlink_rcv_msg+0x23f/0x26a ? check_preemption_disabled+0x3d/0xf2 ? rtnl_calcit.isra.0+0x147/0x147 netlink_rcv_skb+0x61/0xb2 netlink_unicast+0x100/0x187 netlink_sendmsg+0x37f/0x3a0 ? netlink_unicast+0x187/0x187 sock_sendmsg_nosec+0x67/0x9b ____sys_sendmsg+0x19d/0x1f9 ? copy_msghdr_from_user+0x4c/0x5e ? rcu_read_lock_any_held+0x2a/0x78 ___sys_sendmsg+0x6c/0x8c ? asm_sysvec_apic_timer_interrupt+0x12/0x20 ? lockdep_hardirqs_on+0xd9/0x102 ? sockfd_lookup_light+0x69/0x99 __sys_sendmsg+0x50/0x6e do_syscall_64+0xcb/0xf2 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f98dea28914 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53 RSP: 002b:00007fff859f5e68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e2e RAX: ffffffffffffffda RBX: 00000000619cb810 RCX: 00007f98dea28914 RDX: 0000000000000000 RSI: 00007fff859f5ed0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008 R10: fffffffffffffce6 R11: 0000000000000246 R12: 0000000000000001 R13: 000055c0097ae520 R14: 000055c0097957fd R15: 00007fff859f63a0 </TASK> Modules linked in: bridge stp llc bonding virtio_net

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix null pointer access when abort scan During cancel scan we might use vif that weren't scanning. Fix this by using the actual scanning vif.