In the Linux kernel, the following vulnerability has been resolved: usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled When only PHY1 is used (for example on Odroid-HC4), the regmap init code uses the usb2 ports when doesn't initialize the PHY1 regmap entry. This fixes: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... pc : regmap_update_bits_base+0x40/0xa0 lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 ... Call trace: regmap_update_bits_base+0x40/0xa0 dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 dwc3_meson_g12a_usb2_init+0x7c/0xc8 dwc3_meson_g12a_usb_init+0x28/0x48 dwc3_meson_g12a_probe+0x298/0x540 platform_probe+0x70/0xe0 really_probe+0xf0/0x4d8 driver_probe_device+0xfc/0x168 ...

In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Avoid smp_processor_id() in preemptible code The BUG message "BUG: using smp_processor_id() in preemptible [00000000] code" was observed for TCMU devices with kernel config DEBUG_PREEMPT. The message was observed when blktests block/005 was run on TCMU devices with fileio backend or user:zbc backend [1]. The commit 1130b499b4a7 ("scsi: target: tcm_loop: Use LIO wq cmd submission helper") triggered the symptom. The commit modified work queue to handle commands and changed 'current->nr_cpu_allowed' at smp_processor_id() call. The message was also observed at system shutdown when TCMU devices were not cleaned up [2]. The function smp_processor_id() was called in SCSI host work queue for abort handling, and triggered the BUG message. This symptom was observed regardless of the commit 1130b499b4a7 ("scsi: target: tcm_loop: Use LIO wq cmd submission helper"). To avoid the preemptible code check at smp_processor_id(), get CPU ID with raw_smp_processor_id() instead. The CPU ID is used for performance improvement then thread move to other CPU will not affect the code. [1] [ 56.468103] run blktests block/005 at 2021-05-12 14:16:38 [ 57.369473] check_preemption_disabled: 85 callbacks suppressed [ 57.369480] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1511 [ 57.369506] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1510 [ 57.369512] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1506 [ 57.369552] caller is __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369606] CPU: 4 PID: 1506 Comm: fio Not tainted 5.13.0-rc1+ #34 [ 57.369613] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 57.369617] Call Trace: [ 57.369621] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1507 [ 57.369628] dump_stack+0x6d/0x89 [ 57.369642] check_preemption_disabled+0xc8/0xd0 [ 57.369628] caller is __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369655] __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369695] target_init_cmd+0x76/0x90 [target_core_mod] [ 57.369732] tcm_loop_queuecommand+0x109/0x210 [tcm_loop] [ 57.369744] scsi_queue_rq+0x38e/0xc40 [ 57.369761] __blk_mq_try_issue_directly+0x109/0x1c0 [ 57.369779] blk_mq_try_issue_directly+0x43/0x90 [ 57.369790] blk_mq_submit_bio+0x4e5/0x5d0 [ 57.369812] submit_bio_noacct+0x46e/0x4e0 [ 57.369830] __blkdev_direct_IO_simple+0x1a3/0x2d0 [ 57.369859] ? set_init_blocksize.isra.0+0x60/0x60 [ 57.369880] generic_file_read_iter+0x89/0x160 [ 57.369898] blkdev_read_iter+0x44/0x60 [ 57.369906] new_sync_read+0x102/0x170 [ 57.369929] vfs_read+0xd4/0x160 [ 57.369941] __x64_sys_pread64+0x6e/0xa0 [ 57.369946] ? lockdep_hardirqs_on+0x79/0x100 [ 57.369958] do_syscall_64+0x3a/0x70 [ 57.369965] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 57.369973] RIP: 0033:0x7f7ed4c1399f [ 57.369979] Code: 08 89 3c 24 48 89 4c 24 18 e8 7d f3 ff ff 4c 8b 54 24 18 48 8b 54 24 10 41 89 c0 48 8b 74 24 08 8b 3c 24 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 04 24 e8 cd f3 ff ff 48 8b [ 57.369983] RSP: 002b:00007ffd7918c580 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 [ 57.369990] RAX: ffffffffffffffda RBX: 00000000015b4540 RCX: 00007f7ed4c1399f [ 57.369993] RDX: 0000000000001000 RSI: 00000000015de000 RDI: 0000000000000009 [ 57.369996] RBP: 00000000015b4540 R08: 0000000000000000 R09: 0000000000000001 [ 57.369999] R10: 0000000000e5c000 R11: 0000000000000293 R12: 00007f7eb5269a70 [ 57.370002] R13: 0000000000000000 R14: 0000000000001000 R15: 00000000015b4568 [ 57.370031] CPU: 7 PID: 1507 Comm: fio Not tainted 5.13.0-rc1+ #34 [ 57.370036] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 57.370039] Call Trace: [ 57.370045] dump_stack+0x6d/0x89 [ 57.370056] ch ---truncated---

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix host stage-2 PGD refcount The KVM page-table library refcounts the pages of concatenated stage-2 PGDs individually. However, when running KVM in protected mode, the host's stage-2 PGD is currently managed by EL2 as a single high-order compound page, which can cause the refcount of the tail pages to reach 0 when they shouldn't, hence corrupting the page-table. Fix this by introducing a new hyp_split_page() helper in the EL2 page allocator (matching the kernel's split_page() function), and make use of it from host_s2_zalloc_pages_exact().

In the Linux kernel, the following vulnerability has been resolved: net:sfc: fix non-freed irq in legacy irq mode SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed...

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in ip_mc_add1_src BUG: memory leak unreferenced object 0xffff888101bc4c00 (size 32): comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................ backtrace: [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline] [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline] [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline] [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095 [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416 [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline] [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423 [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857 [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117 [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline] [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline] [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125 [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47 [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In commit 24803f38a5c0 ("igmp: do not remove igmp souce list info when set link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed, because it was also called in igmpv3_clear_delrec(). Rough callgraph: inetdev_destroy -> ip_mc_destroy_dev -> igmpv3_clear_delrec -> ip_mc_clear_src -> RCU_INIT_POINTER(dev->ip_ptr, NULL) However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through inetdev_by_index() and then in_dev->mc_list->sources cannot be released by ip_mc_del1_src() in the sock_close. Rough call sequence goes like: sock_close -> __sock_release -> inet_release -> ip_mc_drop_socket -> inetdev_by_index -> ip_mc_leave_src -> ip_mc_del_src -> ip_mc_del1_src So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free in_dev->mc_list->sources.

In the Linux kernel, the following vulnerability has been resolved: dm btree remove: assign new_root only when removal succeeds remove_raw() in dm_btree_remove() may fail due to IO read error (e.g. read the content of origin block fails during shadowing), and the value of shadow_spine::root is uninitialized, but the uninitialized value is still assign to new_root in the end of dm_btree_remove(). For dm-thin, the value of pmd->details_root or pmd->root will become an uninitialized value, so if trying to read details_info tree again out-of-bound memory may occur as showed below: general protection fault, probably for non-canonical address 0x3fdcb14c8d7520 CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6 Hardware name: QEMU Standard PC RIP: 0010:metadata_ll_load_ie+0x14/0x30 Call Trace: sm_metadata_count_is_more_than_one+0xb9/0xe0 dm_tm_shadow_block+0x52/0x1c0 shadow_step+0x59/0xf0 remove_raw+0xb2/0x170 dm_btree_remove+0xf4/0x1c0 dm_pool_delete_thin_device+0xc3/0x140 pool_message+0x218/0x2b0 target_message+0x251/0x290 ctl_ioctl+0x1c4/0x4d0 dm_ctl_ioctl+0xe/0x20 __x64_sys_ioctl+0x7b/0xb0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixing it by only assign new_root when removal succeeds

In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: clear BM pool before initialization Register value persist after booting the kernel using kexec which results in kernel panic. Thus clear the BM pool registers before initialisation to fix the issue.

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: efi/fdt: fix panic when no valid fdt found setup_arch() would invoke efi_init()->efi_get_fdt_params(). If no valid fdt found then initial_boot_params will be null. So we should stop further fdt processing here. I encountered this issue on risc-v.

In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: bcm-voter: add a missing of_node_put() Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak.

In the Linux kernel, the following vulnerability has been resolved: driver core: fix potential null-ptr-deref in device_add() I got the following null-ptr-deref report while doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 CPU: 2 PID: 278 Comm: 37-i2c-ds2482 Tainted: G B W N 6.1.0-rc3+ RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x196/0x210 bus_remove_device+0x1bd/0x240 device_add+0xd3d/0x1100 w1_add_master_device+0x476/0x490 [wire] ds2482_probe+0x303/0x3e0 [ds2482] This is how it happened: w1_alloc_dev() // The dev->driver is set to w1_master_driver. memcpy(&dev->dev, device, sizeof(struct device)); device_add() bus_add_device() dpm_sysfs_add() // It fails, calls bus_remove_device. // error path bus_remove_device() // The dev->driver is not null, but driver is not bound. __device_release_driver() klist_remove(&dev->p->knode_driver) <-- It causes null-ptr-deref. // normal path bus_probe_device() // It's not called yet. device_bind_driver() If dev->driver is set, in the error path after calling bus_add_device() in device_add(), bus_remove_device() is called, then the device will be detached from driver. But device_bind_driver() is not called yet, so it causes null-ptr-deref while access the 'knode_driver'. To fix this, set dev->driver to null in the error path before calling bus_remove_device().

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: add error handling in sja1105_setup() If any of sja1105_static_config_load(), sja1105_clocking_setup() or sja1105_devlink_setup() fails, we can't just return in the middle of sja1105_setup() or memory will leak. Add a cleanup path.

In the Linux kernel, the following vulnerability has been resolved: usb: common: usb-conn-gpio: fix NULL pointer dereference of charger When power on system with OTG cable, IDDIG's interrupt arises before the charger registration, it will cause a NULL pointer dereference, fix the issue by registering the power supply before requesting IDDIG/VBUS irq.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix kernel pointer leak Pointers should be printed with %p or %px rather than cast to 'unsigned long long' and printed with %llx. Change %llx to %p to print the secured pointer.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereference on pointer edp The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check")

In the Linux kernel, the following vulnerability has been resolved: NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() 'params' is allocated in digital_tg_listen_mdaa(), but not free when digital_send_cmd() failed, which will cause memory leak. Fix it by freeing 'params' if digital_send_cmd() return failed.

In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: do not decrement idle task preempt count in CPU offline With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we get: BUG: scheduling while atomic: swapper/1/0/0x00000000 no locks held by swapper/1/0. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100 Call Trace: dump_stack_lvl+0xac/0x108 __schedule_bug+0xac/0xe0 __schedule+0xcf8/0x10d0 schedule_idle+0x3c/0x70 do_idle+0x2d8/0x4a0 cpu_startup_entry+0x38/0x40 start_secondary+0x2ec/0x3a0 start_secondary_prolog+0x10/0x14 This is because powerpc's arch_cpu_idle_dead() decrements the idle task's preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc: Re-enable preemption before cpu_die()"), specifically "start_secondary() expects a preempt_count() of 0." However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled"), that justification no longer holds. The idle task isn't supposed to re-enable preemption, so remove the vestigial preempt_enable() from the CPU offline path. Tested with pseries and powernv in qemu, and pseries on PowerVM.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: Remove WARN_ON in tps6598x_block_read Calling tps6598x_block_read with a higher than allowed len can be handled by just returning an error. There's no need to crash systems with panic-on-warn enabled.

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix NULL pointer dereferencing in smc_vlan_by_tcpsk() Coverity reports a possible NULL dereferencing problem: in smc_vlan_by_tcpsk(): 6. returned_null: netdev_lower_get_next returns NULL (checked 29 out of 30 times). 7. var_assigned: Assigning: ndev = NULL return value from netdev_lower_get_next. 1623 ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower); CID 1468509 (#1 of 1): Dereference null return value (NULL_RETURNS) 8. dereference: Dereferencing a pointer that might be NULL ndev when calling is_vlan_dev. 1624 if (is_vlan_dev(ndev)) { Remove the manual implementation and use netdev_walk_all_lower_dev() to iterate over the lower devices. While on it remove an obsolete function parameter comment.

In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - Fix memory leak of pad It appears there are several failure return paths that don't seem to be free'ing pad. Fix these. Addresses-Coverity: ("Resource leak")

In the Linux kernel, the following vulnerability has been resolved: ovl: fix warning in ovl_create_real() Syzbot triggered the following warning in ovl_workdir_create() -> ovl_create_real(): if (!err && WARN_ON(!newdentry->d_inode)) { The reason is that the cgroup2 filesystem returns from mkdir without instantiating the new dentry. Weird filesystems such as this will be rejected by overlayfs at a later stage during setup, but to prevent such a warning, call ovl_mkdir_real() directly from ovl_workdir_create() and reject this case early.

In the Linux kernel, the following vulnerability has been resolved: nfs: fix acl memory leak of posix_acl_create() When looking into another nfs xfstests report, I found acl and default_acl in nfs3_proc_create() and nfs3_proc_mknod() error paths are possibly leaked. Fix them in advance.

In the Linux kernel, the following vulnerability has been resolved: ice: Avoid crash from unnecessary IDA free In the remove path, there is an attempt to free the aux_idx IDA whether it was allocated or not. This can potentially cause a crash when unloading the driver on systems that do not initialize support for RDMA. But, this free cannot be gated by the status bit for RDMA, since it is allocated if the driver detects support for RDMA at probe time, but the driver can enter into a state where RDMA is not supported after the IDA has been allocated at probe time and this would lead to a memory leak. Initialize aux_idx to an invalid value and check for a valid value when unloading to determine if an IDA free is necessary.

In the Linux kernel, the following vulnerability has been resolved: tipc: wait and exit until all work queues are done On some host, a crash could be triggered simply by repeating these commands several times: # modprobe tipc # tipc bearer enable media udp name UDP1 localip 127.0.0.1 # rmmod tipc [] BUG: unable to handle kernel paging request at ffffffffc096bb00 [] Workqueue: events 0xffffffffc096bb00 [] Call Trace: [] ? process_one_work+0x1a7/0x360 [] ? worker_thread+0x30/0x390 [] ? create_worker+0x1a0/0x1a0 [] ? kthread+0x116/0x130 [] ? kthread_flush_work_fn+0x10/0x10 [] ? ret_from_fork+0x35/0x40 When removing the TIPC module, the UDP tunnel sock will be delayed to release in a work queue as sock_release() can't be done in rtnl_lock(). If the work queue is schedule to run after the TIPC module is removed, kernel will crash as the work queue function cleanup_beareri() code no longer exists when trying to invoke it. To fix it, this patch introduce a member wq_count in tipc_net to track the numbers of work queues in schedule, and wait and exit until all work queues are done in tipc_exit_net().

In the Linux kernel, the following vulnerability has been resolved: sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb We should always check if skb_header_pointer's return is NULL before using it, otherwise it may cause null-ptr-deref, as syzbot reported: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline] RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196 Call Trace: <IRQ> sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109 ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422 ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix deadlock in AP/VLAN handling Syzbot reports that when you have AP_VLAN interfaces that are up and close the AP interface they belong to, we get a deadlock. No surprise - since we dev_close() them with the wiphy mutex held, which goes back into the netdev notifier in cfg80211 and tries to acquire the wiphy mutex there. To fix this, we need to do two things: 1) prevent changing iftype while AP_VLANs are up, we can't easily fix this case since cfg80211 already calls us with the wiphy mutex held, but change_interface() is relatively rare in drivers anyway, so changing iftype isn't used much (and userspace has to fall back to down/change/up anyway) 2) pull the dev_close() loop over VLANs out of the wiphy mutex section in the normal stop case

An issue was discovered in ioapic_lazy_update_eoi in arch/x86/kvm/ioapic.c in the Linux kernel before 5.9.2. It has an infinite loop related to improper interaction between a resampler and edge triggering, aka CID-77377064c3a9.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix error handling of scsi_host_alloc() After device is initialized via device_initialize(), or its name is set via dev_set_name(), the device has to be freed via put_device(). Otherwise device name will be leaked because it is allocated dynamically in dev_set_name(). Fix the leak by replacing kfree() with put_device(). Since scsi_host_dev_release() properly handles IDA and kthread removal, remove special-casing these from the error handling as well.

In the Linux kernel, the following vulnerability has been resolved: net: fix uninit-value in caif_seqpkt_sendmsg When nr_segs equal to zero in iovec_from_user, the object msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg which is defined in ___sys_sendmsg. So we cann't just judge msg->msg_iter.iov->base directlly. We can use nr_segs to judge msg in caif_seqpkt_sendmsg whether has data buffers. ===================================================== BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343 ___sys_sendmsg net/socket.c:2397 [inline] __sys_sendmmsg+0x808/0xc90 net/socket.c:2480 __compat_sys_sendmmsg net/compat.c:656 [inline]

In the Linux kernel, the following vulnerability has been resolved: selinux: fix NULL-pointer dereference when hashtab allocation fails When the hash table slot array allocation fails in hashtab_init(), h->size is left initialized with a non-zero value, but the h->htable pointer is NULL. This may then cause a NULL pointer dereference, since the policydb code relies on the assumption that even after a failed hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called on it. Yet, these detect an empty hashtab only by looking at the size. Fix this by making sure that hashtab_init() always leaves behind a valid empty hashtab when the allocation fails.

In the Linux kernel, the following vulnerability has been resolved: i2c: acpi: fix resource leak in reconfiguration device addition acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a reference on the adapter which is never released which will result in a reference count leak and render the adapter unremovable. Make sure to put the adapter after creating the client in the same manner that we do for OF. [wsa: fixed title]

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Protect driver from buggy firmware When processing port up/down events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not the CPU port (local port 0), which exists, but lacks a netdev. This can result in a NULL pointer dereference when calling netif_carrier_{on,off}(). Fix this by bailing early when processing an event reported for the CPU port. Problem was only observed when running on top of a buggy emulator.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix locking in ieee80211_start_ap error path We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it.

In the Linux kernel, the following vulnerability has been resolved: phonet/pep: refuse to enable an unbound pipe This ioctl() implicitly assumed that the socket was already bound to a valid local socket name, i.e. Phonet object. If the socket was not bound, two separate problems would occur: 1) We'd send an pipe enablement request with an invalid source object. 2) Later socket calls could BUG on the socket unexpectedly being connected yet not bound to a valid object.

In the Linux kernel, the following vulnerability has been resolved: net: caif: fix memory leak in caif_device_notify In case of caif_enroll_dev() fail, allocated link_support won't be assigned to the corresponding structure. So simply free allocated pointer in case of error

In the Linux kernel, the following vulnerability has been resolved: net: rds: fix memory leak in rds_recvmsg Syzbot reported memory leak in rds. The problem was in unputted refcount in case of error. int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int msg_flags) { ... if (!rds_next_incoming(rs, &inc)) { ... } After this "if" inc refcount incremented and if (rds_cmsg_recv(inc, msg, rs)) { ret = -EFAULT; goto out; } ... out: return ret; } in case of rds_cmsg_recv() fail the refcount won't be decremented. And it's easy to see from ftrace log, that rds_inc_addref() don't have rds_inc_put() pair in rds_recvmsg() after rds_cmsg_recv() 1) | rds_recvmsg() { 1) 3.721 us | rds_inc_addref(); 1) 3.853 us | rds_message_inc_copy_to_user(); 1) + 10.395 us | rds_cmsg_recv(); 1) + 34.260 us | }

In the Linux kernel, the following vulnerability has been resolved: net: tls, fix WARNIING in __sk_msg_free A splice with MSG_SPLICE_PAGES will cause tls code to use the tls_sw_sendmsg_splice path in the TLS sendmsg code to move the user provided pages from the msg into the msg_pl. This will loop over the msg until msg_pl is full, checked by sk_msg_full(msg_pl). The user can also set the MORE flag to hint stack to delay sending until receiving more pages and ideally a full buffer. If the user adds more pages to the msg than can fit in the msg_pl scatterlist (MAX_MSG_FRAGS) we should ignore the MORE flag and send the buffer anyways. What actually happens though is we abort the msg to msg_pl scatterlist setup and then because we forget to set 'full record' indicating we can no longer consume data without a send we fallthrough to the 'continue' path which will check if msg_data_left(msg) has more bytes to send and then attempts to fit them in the already full msg_pl. Then next iteration of sender doing send will encounter a full msg_pl and throw the warning in the syzbot report. To fix simply check if we have a full_record in splice code path and if not send the msg regardless of MORE flag.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix wait_fence submitqueue leak We weren't dropping the submitqueue reference in all paths. In particular, when the fence has already been signalled. Split out a helper to simplify handling this in the various different return paths.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Arturo reported this backtrace: [709732.358791] WARNING: CPU: 3 PID: 456 at arch/x86/kernel/fpu/core.c:128 kernel_fpu_begin_mask+0xae/0xe0 [709732.358793] Modules linked in: binfmt_misc nft_nat nft_chain_nat nf_nat nft_counter nft_ct nf_tables nf_conntrack_netlink nfnetlink 8021q garp stp mrp llc vrf intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul mgag200 ghash_clmulni_intel drm_kms_helper cec aesni_intel drm libaes crypto_simd cryptd glue_helper mei_me dell_smbios iTCO_wdt evdev intel_pmc_bxt iTCO_vendor_support dcdbas pcspkr rapl dell_wmi_descriptor wmi_bmof sg i2c_algo_bit watchdog mei acpi_ipmi ipmi_si button nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipmi_devintf ipmi_msghandler ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor sd_mod t10_pi crc_t10dif crct10dif_generic raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ahci libahci tg3 libata xhci_pci libphy xhci_hcd ptp usbcore crct10dif_pclmul crct10dif_common bnxt_en crc32c_intel scsi_mod [709732.358941] pps_core i2c_i801 lpc_ich i2c_smbus wmi usb_common [709732.358957] CPU: 3 PID: 456 Comm: jbd2/dm-0-8 Not tainted 5.10.0-0.bpo.5-amd64 #1 Debian 5.10.24-1~bpo10+1 [709732.358959] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020 [709732.358964] RIP: 0010:kernel_fpu_begin_mask+0xae/0xe0 [709732.358969] Code: ae 54 24 04 83 e3 01 75 38 48 8b 44 24 08 65 48 33 04 25 28 00 00 00 75 33 48 83 c4 10 5b c3 65 8a 05 5e 21 5e 76 84 c0 74 92 <0f> 0b eb 8e f0 80 4f 01 40 48 81 c7 00 14 00 00 e8 dd fb ff ff eb [709732.358972] RSP: 0018:ffffbb9700304740 EFLAGS: 00010202 [709732.358976] RAX: 0000000000000001 RBX: 0000000000000003 RCX: 0000000000000001 [709732.358979] RDX: ffffbb9700304970 RSI: ffff922fe1952e00 RDI: 0000000000000003 [709732.358981] RBP: ffffbb9700304970 R08: ffff922fc868a600 R09: ffff922fc711e462 [709732.358984] R10: 000000000000005f R11: ffff922ff0b27180 R12: ffffbb9700304960 [709732.358987] R13: ffffbb9700304b08 R14: ffff922fc664b6c8 R15: ffff922fc664b660 [709732.358990] FS: 0000000000000000(0000) GS:ffff92371fec0000(0000) knlGS:0000000000000000 [709732.358993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [709732.358996] CR2: 0000557a6655bdd0 CR3: 000000026020a001 CR4: 00000000007706e0 [709732.358999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [709732.359001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [709732.359003] PKRU: 55555554 [709732.359005] Call Trace: [709732.359009] <IRQ> [709732.359035] nft_pipapo_avx2_lookup+0x4c/0x1cba [nf_tables] [709732.359046] ? sched_clock+0x5/0x10 [709732.359054] ? sched_clock_cpu+0xc/0xb0 [709732.359061] ? record_times+0x16/0x80 [709732.359068] ? plist_add+0xc1/0x100 [709732.359073] ? psi_group_change+0x47/0x230 [709732.359079] ? skb_clone+0x4d/0xb0 [709732.359085] ? enqueue_task_rt+0x22b/0x310 [709732.359098] ? bnxt_start_xmit+0x1e8/0xaf0 [bnxt_en] [709732.359102] ? packet_rcv+0x40/0x4a0 [709732.359121] nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359133] nft_do_chain+0x350/0x500 [nf_tables] [709732.359152] ? nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359163] ? nft_do_chain+0x364/0x500 [nf_tables] [709732.359172] ? fib4_rule_action+0x6d/0x80 [709732.359178] ? fib_rules_lookup+0x107/0x250 [709732.359184] nft_nat_do_chain+0x8a/0xf2 [nft_chain_nat] [709732.359193] nf_nat_inet_fn+0xea/0x210 [nf_nat] [709732.359202] nf_nat_ipv4_out+0x14/0xa0 [nf_nat] [709732.359207] nf_hook_slow+0x44/0xc0 [709732.359214] ip_output+0xd2/0x100 [709732.359221] ? __ip_finish_output+0x210/0x210 [709732.359226] ip_forward+0x37d/0x4a0 [709732.359232] ? ip4_key_hashfn+0xb0/0xb0 [709732.359238] ip_subli ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ftrace: Do not blindly read the ip address in ftrace_bug() It was reported that a bug on arm64 caused a bad ip address to be used for updating into a nop in ftrace_init(), but the error path (rightfully) returned -EINVAL and not -EFAULT, as the bug caused more than one error to occur. But because -EINVAL was returned, the ftrace_bug() tried to report what was at the location of the ip address, and read it directly. This caused the machine to panic, as the ip was not pointing to a valid memory address. Instead, read the ip address with copy_from_kernel_nofault() to safely access the memory, and if it faults, report that the address faulted, otherwise report what was in that location.

In the Linux kernel, the following vulnerability has been resolved: PM: EM: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: tipc: skb_linearize the head skb when reassembling msgs It's not a good idea to append the frag skb to a skb's frag_list if the frag_list already has skbs from elsewhere, such as this skb was created by pskb_copy() where the frag_list was cloned (all the skbs in it were skb_get'ed) and shared by multiple skbs. However, the new appended frag skb should have been only seen by the current skb. Otherwise, it will cause use after free crashes as this appended frag skb are seen by multiple skbs but it only got skb_get called once. The same thing happens with a skb updated by pskb_may_pull() with a skb_cloned skb. Li Shuang has reported quite a few crashes caused by this when doing testing over macvlan devices: [] kernel BUG at net/core/skbuff.c:1970! [] Call Trace: [] skb_clone+0x4d/0xb0 [] macvlan_broadcast+0xd8/0x160 [macvlan] [] macvlan_process_broadcast+0x148/0x150 [macvlan] [] process_one_work+0x1a7/0x360 [] worker_thread+0x30/0x390 [] kernel BUG at mm/usercopy.c:102! [] Call Trace: [] __check_heap_object+0xd3/0x100 [] __check_object_size+0xff/0x16b [] simple_copy_to_iter+0x1c/0x30 [] __skb_datagram_iter+0x7d/0x310 [] __skb_datagram_iter+0x2a5/0x310 [] skb_copy_datagram_iter+0x3b/0x90 [] tipc_recvmsg+0x14a/0x3a0 [tipc] [] ____sys_recvmsg+0x91/0x150 [] ___sys_recvmsg+0x7b/0xc0 [] kernel BUG at mm/slub.c:305! [] Call Trace: [] <IRQ> [] kmem_cache_free+0x3ff/0x400 [] __netif_receive_skb_core+0x12c/0xc40 [] ? kmem_cache_alloc+0x12e/0x270 [] netif_receive_skb_internal+0x3d/0xb0 [] ? get_rx_page_info+0x8e/0xa0 [be2net] [] be_poll+0x6ef/0xd00 [be2net] [] ? irq_exit+0x4f/0x100 [] net_rx_action+0x149/0x3b0 ... This patch is to fix it by linearizing the head skb if it has frag_list set in tipc_buf_append(). Note that we choose to do this before calling skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can not just drop the frag_list either as the early time.

In the Linux kernel, the following vulnerability has been resolved: sit: do not call ipip6_dev_free() from sit_init_net() ipip6_dev_free is sit dev->priv_destructor, already called by register_netdevice() if something goes wrong. Alternative would be to make ipip6_dev_free() robust against multiple invocations, but other drivers do not implement this strategy. syzbot reported: dst_release underflow WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173 Modules linked in: CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173 Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48 RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246 RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000 RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358 R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000 FS: 00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160 ipip6_dev_free net/ipv6/sit.c:1414 [inline] sit_init_net+0x229/0x550 net/ipv6/sit.c:1936 ops_init+0x313/0x430 net/core/net_namespace.c:140 setup_net+0x35b/0x9d0 net/core/net_namespace.c:326 copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470 create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226 ksys_unshare+0x57d/0xb50 kernel/fork.c:3075 __do_sys_unshare kernel/fork.c:3146 [inline] __se_sys_unshare kernel/fork.c:3144 [inline] __x64_sys_unshare+0x34/0x40 kernel/fork.c:3144 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f66c882ce99 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200 RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000 </TASK>

In the Linux kernel, the following vulnerability has been resolved: io_uring: fail cancellation for EXITING tasks WARNING: CPU: 1 PID: 20 at fs/io_uring.c:6269 io_try_cancel_userdata+0x3c5/0x640 fs/io_uring.c:6269 CPU: 1 PID: 20 Comm: kworker/1:0 Not tainted 5.16.0-rc1-syzkaller #0 Workqueue: events io_fallback_req_func RIP: 0010:io_try_cancel_userdata+0x3c5/0x640 fs/io_uring.c:6269 Call Trace: <TASK> io_req_task_link_timeout+0x6b/0x1e0 fs/io_uring.c:6886 io_fallback_req_func+0xf9/0x1ae fs/io_uring.c:1334 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> We need original task's context to do cancellations, so if it's dying and the callback is executed in a fallback mode, fail the cancellation attempt.

In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix a memory leak in error handling paths If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be updated and 'hv_uio_cleanup()' in the error handling path will not be able to free the corresponding buffer. In such a case, we need to free the buffer explicitly.

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix rdma_resolve_route() memory leak Fix a memory leak when "mda_resolve_route() is called more than once on the same "rdma_cm_id". This is possible if cma_query_handler() triggers the RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and allows rdma_resolve_route() to be called again.

In the Linux kernel, the following vulnerability has been resolved: spi: fix use-after-free of the add_lock mutex Commit 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses") introduced a per-controller mutex. But mutex_unlock() of said lock is called after the controller is already freed: spi_unregister_controller(ctlr) -> put_device(&ctlr->dev) -> spi_controller_release(dev) -> mutex_unlock(&ctrl->add_lock) Move the put_device() after the mutex_unlock().

In the Linux kernel, the following vulnerability has been resolved: memory: fsl_ifc: fix leak of IO mapping on probe failure On probe error the driver should unmap the IO memory. Smatch reports: drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs.

In the Linux kernel, the following vulnerability has been resolved: cfg80211: fix management registrations locking The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists.