A vulnerability was found in Netgear WNDR3700v2 1.0.1.14 and classified as problematic. This issue affects some unknown processing of the component Web Interface. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-221153 was assigned to this vulnerability.

Netgear RP114 Cable/DSL Web Safe Router Firmware 3.26, when configured to block traffic below port 1024, allows remote attackers to cause a denial of service (hang) via a port scan of the WAN port.

Atmel Firmware 1.3 Wireless Access Point (WAP) allows remote attackers to cause a denial of service via a SNMP request with (1) a community string other than "public" or (2) an unknown OID, which causes the WAP to deny subsequent SNMP requests.

Certain NETGEAR devices are affected by denial of service. This affects R6400v2 before 1.0.4.98, R6700v3 before 1.0.4.98, R7900 before 1.0.3.18, and R8000 before 1.0.4.46.

A vulnerability has been found in Netgear R6900P and R7000P 1.3.3.154 and classified as critical. Affected by this vulnerability is the function sub_16C4C of the component HTTP Header Handler. The manipulation of the argument Host leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

In Netgear R7000 V1.3.1.64_10.1.36 and EAX80 V1.0.1.70_1.0.2, the USERLIMIT_GLOBAL option is set to 0 in the bftpd.conf configuration file. This can cause DoS attacks when unlimited users are connected.

Certain NETGEAR devices are affected by insecure renegotiation. This affects SRX5308 before 2017-02-10, FVS336Gv3 before 2017-02-10, FVS318N before 2017-02-10, and FVS318Gv2 before 2017-02-10.

NetGear WNDR4700 Media Server devices with firmware 1.0.0.34 allow remote attackers to cause a denial of service (device crash).

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects RAX35 before 1.0.3.94, RAX38 before 1.0.3.94, and RAX40 before 1.0.3.94.

Any request send to a Netgear Nighthawk Wifi6 Router (RAX30)'s web service containing a “Content-Type” of “multipartboundary=” will result in the request body being written to “/tmp/mulipartFile” on the device itself. A sufficiently large file will cause device resources to be exhausted, resulting in the device becoming unusable until it is rebooted.

Certain NETGEAR devices are affected by slowdown/stoppage. This affects C6300 before 2017-05-30, CM400 before 2017-05-30, CM700 before 2017-05-30, and CMD31T before 2017-05-30.

Web-Based Administration in Netgear FVS318 VPN Router allows remote attackers to cause a denial of service (no new connections) via a large number of open HTTP connections.

Netgear RM-356 and RT-338 series SOHO routers allow remote attackers to cause a denial of service (crash) via a UDP port scan, as demonstrated using nmap.

Certain NETGEAR devices are affected by denial of service. This affects R8900 before 1.0.5.2, R9000 before 1.0.5.2, XR500 before 2.3.2.56, and XR700 before 1.0.1.20.

An exploitable denial-of-service vulnerability exists in the Host Access Point Daemon (hostapd) on the NETGEAR N300 (WNR2000v5 with Firmware Version V1.0.0.70) wireless router. A SOAP request sent in an invalid sequence to the <WFAWLANConfig:1#PutMessage> service can cause a null pointer dereference, resulting in the hostapd service crashing. An unauthenticated attacker can send a specially-crafted SOAP request to trigger this vulnerability.

An exploitable denial-of-service vulnerability exists in the session handling functionality of the NETGEAR N300 (WNR2000v5 with Firmware Version V1.0.0.70) HTTP server. An HTTP request with an empty User-Agent string sent to a page requiring authentication can cause a null pointer dereference, resulting in the HTTP service crashing. An unauthenticated attacker can send a specially crafted HTTP request to trigger this vulnerability.

NETGEAR DG834GT Wireless ADSL router running firmware 1.01.28 allows attackers to cause a denial of service (device hang) via a long string in the username field in the login window.

Certain NETGEAR devices are affected by denial of service. This affects D6200 before 1.1.00.34, D7000 before 1.0.1.70, JR6150 before 1.0.1.18, R6050 before 1.0.1.18, and WNR2020 before 1.1.0.62.

A vulnerability, which was classified as problematic, was found in Netgear SRX5308 up to 4.3.5-3. Affected is an unknown function. The manipulation leads to denial of service. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-227658 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

In MPLS environments, receipt of a specific SNMP packet may cause the routing protocol daemon (RPD) process to crash and restart. By continuously sending a specially crafted SNMP packet, an attacker can repetitively crash the RPD process causing prolonged denial of service. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS : 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D48 on EX/QFX series; 15.1 versions prior to 15.1R4-S9, 15.1R7-S2; 15.1F6 versions prior to 15.1F6-S11; 15.1X49 versions prior to 15.1X49-D141, 15.1X49-D144, 15.1X49-D150 on SRX Series; 15.1X53 versions prior to 15.1X53-D234 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D68 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 15.1X53 versions prior to 15.1X53-D590 on EX2300/EX3400 Series; 15.1X54 on ACX Series; 16.1 versions prior to 16.1R3-S10, 16.1R4-S11, 16.1R6-S5, 16.1R7; 16.1X65 versions prior to 16.1X65-D48; 16.2 versions prior to 16.2R2-S6; 17.1 versions prior to 17.1R2-S8, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R3; 17.2X75 versions prior to 17.2X75-D92, 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R3; 17.4 versions prior to 17.4R1-S4, 17.4R2; 18.1 versions prior to 18.1R1-S1, 18.1R2-S1, 18.1R3; 18.2X75 versions prior to 18.2X75-D10.

The srxpfe process may crash on SRX Series services gateways when the UTM module processes a specific fragmented HTTP packet. The packet is misinterpreted as a regular TCP packet which causes the processor to crash. This issue affects all SRX Series platforms that support URL-Filtering and have web-filtering enabled. Affected releases are Juniper Networks Junos OS: 12.3X48 versions prior to 12.3X48-D85 on SRX Series; 15.1X49 versions prior to 15.1X49-D181, 15.1X49-D190 on SRX Series; 17.3 versions on SRX Series; 17.4 versions prior to 17.4R1-S8, 17.4R2-S5, 17.4R3 on SRX Series; 18.1 versions prior to 18.1R3-S6 on SRX Series; 18.2 versions prior to 18.2R2-S1, 18.2R3 on SRX Series; 18.3 versions prior to 18.3R1-S2, 18.3R2 on SRX Series; 18.4 versions prior to 18.4R1-S1, 18.4R2 on SRX Series.

When BGP tracing is enabled an incoming BGP message may cause the Junos OS routing protocol daemon (rpd) process to crash and restart. While rpd restarts after a crash, repeated crashes can result in an extended DoS condition. Affected releases are Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S4, 16.1R7-S5; 16.2 versions prior to 16.2R2-S9, 16.2R3; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3-S1; 17.3 versions prior to 17.3R3-S3, 17.3R3-S4, 17.3R4; 17.4 versions prior to 17.4R1-S7, 17.4R2-S3, 17.4R2-S4, 17.4R3; 18.1 versions prior to 18.1R2-S4, 18.1R3-S4, 18.1R4; 18.2 versions prior to 18.2R2-S2, 18.2R2-S3, 18.2R3; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S3, 18.3R2; 18.4 versions prior to 18.4R1-S2, 18.4R2. This issue does not affect Junos releases prior to 16.1R1.

Salt masters prior to 3005.2 or 3006.2 contain a DOS in minion return. After receiving several bad packets on the request server equal to the number of worker threads, the master will become unresponsive to return requests until restarted.

Receipt of a specific packet on the out-of-band management interface fxp0 may cause the system to crash and restart (vmcore). By continuously sending a specially crafted packet to the fxp0 interface, an attacker can repetitively crash the rpd process causing prolonged Denial of Service (DoS). Affected releases are Juniper Networks SRX5000 Series: 12.1X46 versions prior to 12.1X46-D82; 12.3X48 versions prior to 12.3X48-D80; 15.1X49 versions prior to 15.1X49-D160.

On Junos devices with the BGP graceful restart helper mode enabled or the BGP graceful restart mechanism enabled, a BGP session restart on a remote peer that has the graceful restart mechanism enabled may cause the local routing protocol daemon (RPD) process to crash and restart. By simulating a specific BGP session restart, an attacker can repeatedly crash the RPD process causing prolonged denial of service (DoS). Graceful restart helper mode for BGP is enabled by default. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS: 16.1 versions prior to 16.1R7; 16.1X65 versions prior to 16.1X65-D48; 16.2 versions prior to 16.2R2-S8; 17.1 versions prior to 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R3; 17.2X75 versions prior to 17.2X75-D92, 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S4, 17.4R2; 18.1 versions prior to 18.1R2. Junos OS releases prior to 16.1R1 are not affected.

A vulnerability has been found in INSTAR 2K+ and 4K 3.11.1 Build 1124. This vulnerability affects unknown code of the component Backend IPC Server. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

On Junos devices with the BGP graceful restart helper mode enabled or the BGP graceful restart mechanism enabled, a certain sequence of BGP session restart on a remote peer that has the graceful restart mechanism enabled may cause the local routing protocol daemon (RPD) process to crash and restart. Repeated crashes of the RPD process can cause prolonged Denial of Service (DoS). Graceful restart helper mode for BGP is enabled by default. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S3; 16.2 versions prior to 16.2R2-S9; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3; 17.2X75 versions prior to 17.2X75-D105; 17.3 versions prior to 17.3R3-S2; 17.4 versions prior to 17.4R1-S7, 17.4R2-S2, 17.4R3; 18.1 versions prior to 18.1R3-S2; 18.2 versions prior to 18.2R2; 18.2X75 versions prior to 18.2X75-D12, 18.2X75-D30; 18.3 versions prior to 18.3R1-S4, 18.3R2. Junos OS releases prior to 16.1R1 are not affected.

Wago 750 Series PLCs with firmware version 10 and prior include a remote attack may take advantage of an improper implementation of the 3 way handshake during a TCP connection affecting the communications with commission and service tools. Specially crafted packets may also be sent to Port 2455/TCP/IP, used in Codesys management software, which may result in a denial-of-service condition of communications with commissioning and service tools.

A vulnerability has been found in Open5GS up to 2.7.5. Affected by this issue is the function esm_handle_pdn_connectivity_request of the file src/mme/esm-handler.c of the component AMF Component. The manipulation leads to denial of service. The attack may be launched remotely. Upgrading to version 2.7.6 is able to address this issue. The name of the patch is 701505102f514cbde2856cd2ebc9bedb7efc820d. It is recommended to upgrade the affected component.

A vulnerability was identified in Open5GS up to 2.7.5. Affected by this vulnerability is the function amf_npcf_am_policy_control_build_create/amf_nsmf_pdusession_build_create_sm_context of the file src/amf/npcf-build.c of the component AMF. The manipulation leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.7.6 is able to address this issue. The patch is named cf63dd63197bf61a4b041aa364ba6a6199ab15e4. It is recommended to upgrade the affected component.

A vulnerability was found in Open5GS up to 2.7.5. This affects the function gmm_state_exception of the file src/amf/gmm-sm.c of the component AMF. The manipulation leads to denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.7.6 is able to address this issue. The identifier of the patch is f47f2bd4f7274295c5fbb19e2f806753d183d09a. It is recommended to upgrade the affected component.

A vulnerability has been found in Open5GS up to 2.7.5. Affected is the function gmm_state_de_registered/gmm_state_exception of the file src/amf/gmm-sm.c of the component AMF. The manipulation leads to denial of service. It is possible to launch the attack remotely. Upgrading to version 2.7.6 is able to address this issue. The name of the patch is 1f30edac27f69f61cff50162e980fe58fdeb30ca. It is recommended to upgrade the affected component.

A vulnerability was determined in Open5GS up to 2.7.5. This vulnerability affects the function smf_state_operational of the file src/smf/smf-sm.c of the component SMF. The manipulation of the argument stream leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version v2.7.6 is able to address this issue. The patch is identified as f168f7586a4fa536cee95ae60ac437d997f15b97. It is recommended to upgrade the affected component.

A vulnerability was found in Filseclab Twister Antivirus 8. It has been declared as problematic. This vulnerability affects the function 0x80112053 in the library fildds.sys of the component IoControlCode Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-223288.

A mismatch caused by client-triggered server-sent stream resets between HTTP/2 specifications and the internal architectures of some HTTP/2 implementations may result in excessive server resource consumption leading to denial-of-service (DoS). By opening streams and then rapidly triggering the server to reset them—using malformed frames or flow control errors—an attacker can exploit incorrect stream accounting. Streams reset by the server are considered closed at the protocol level, even though backend processing continues. This allows a client to cause the server to handle an unbounded number of concurrent streams on a single connection. This CVE will be updated as affected product details are released.

A vulnerability classified as problematic was found in Arborator Server. This vulnerability affects the function start of the file project.cgi. The manipulation of the argument project leads to denial of service. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The patch is identified as cdbdbcbd491db65e9d697ab4365605fdfab1a604. It is recommended to apply a patch to fix this issue. VDB-230662 is the identifier assigned to this vulnerability.

A vulnerability was determined in Open5GS up to 2.7.5. Affected by this issue is the function smf_gsm_state_wait_pfcp_deletion of the file src/smf/gsm-sm.c of the component SMF. The manipulation leads to denial of service. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.7.6 is able to address this issue. The patch is identified as c58b8f081986aaf2a312d73a0a17985518b47fe6. It is recommended to upgrade the affected component.

A vulnerability was found in Filseclab Twister Antivirus 8. It has been rated as critical. This issue affects the function 0x8011206B in the library fildds.sys of the component IoControlCode Handler. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-223289 was assigned to this vulnerability.

wasm3 139076a is vulnerable to Denial of Service (DoS).

A vulnerability, which was classified as problematic, was found in Shemes GrabIt up to 1.7.2 Beta 4. This affects the component NZB Date Parser. The manipulation of the argument date with the input 1000000000000000 as part of a NZB File leads to a denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

The deferred_image_processing (aka Deferred image processing) extension before 1.0.2 for TYPO3 allows Denial of Service via the FAL API because of /var/transient disk consumption.

A vulnerability was found in GNU cflow 1.7. It has been rated as problematic. This issue affects the function func_body/parse_variable_declaration of the file parser.c. The manipulation leads to denial of service. The exploit has been disclosed to the public and may be used. The identifier VDB-229373 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as problematic has been found in flar2 ElementalX up to 6.x on Nexus 9. Affected is the function xfrm_dump_policy_done of the file net/xfrm/xfrm_user.c of the component ipsec. The manipulation leads to denial of service. Upgrading to version 7.00 is able to address this issue. The name of the patch is 1df72c9f0f61304437f4f1037df03b5fb36d5a79. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-217152.

The TCP Server module in toxcore before 0.2.8 doesn't free the TCP priority queue under certain conditions, which allows a remote attacker to exhaust the system's memory, causing a denial of service (DoS).

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in blockmason credit-protocol. It has been declared as problematic. Affected by this vulnerability is the function executeUcacTx of the file contracts/CreditProtocol.sol of the component UCAC Handler. The manipulation leads to denial of service. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The patch is named 082e01f18707ef995e80ebe97fcedb229a55efc5. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-252799. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Configuration defects in the secure OS module.Successful exploitation of this vulnerability will affect availability.

A vulnerability was found in Artifex GhostPDL up to 3989415a5b8e99b9d1b87cc9902bde9b7cdea145. It has been classified as problematic. This affects the function pdf_ferror of the file devices/vector/gdevpdf.c of the component New Output File Open Error Handler. The manipulation leads to null pointer dereference. It is possible to initiate the attack remotely. The identifier of the patch is 619a106ba4c4abed95110f84d5efcd7aee38c7cb. It is recommended to apply a patch to fix this issue.

A vulnerability was found in GPAC up to 2.4. It has been rated as problematic. Affected by this issue is the function gf_dash_download_init_segment of the file src/media_tools/dash_client.c. The manipulation of the argument base_init_url leads to null pointer dereference. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The patch is identified as 153ea314b6b053db17164f8bc3c7e1e460938eaa. It is recommended to apply a patch to fix this issue.

A vulnerability was found in Open5GS up to 2.7.3. It has been declared as problematic. Affected by this vulnerability is the function common_register_state of the file src/mme/emm-sm.c of the component AMF/MME. The manipulation of the argument ran_ue_id leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of the patch is 62cb99755243c9c38e4c060c5d8d0e158fe8cdd5. It is recommended to apply a patch to fix this issue.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in AOL AIM Triton 1.0.4. It has been declared as problematic. This vulnerability affects unknown code of the component Invite Handler. The manipulation of the argument CSeq leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-256318 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.