In IXP EasyInstall 6.2.13723, there are cleartext credentials in network communication on TCP port 20050 when using the Administrator console remotely.

A Vulnerability in OTRS AgentInterface and ExternalInterface allows the reading of plain text passwords which are send back to the client in the server response- This issue affects OTRS: from 8.0.X through 8.0.37.

An issue was discovered on Alcatel-Lucent OmniVista 4760 devices, and 8770 devices before 4.1.2. An incorrect web server configuration allows a remote unauthenticated attacker to retrieve the content of its own session files. Every session file contains the administrative LDAP credentials encoded in a reversible format. Sessions are stored in /sessions/sess_<sessionid>.

An issue was discovered on Humax Wireless Voice Gateway HGB10R-2 20160817_1855 devices. Admin credentials are sent over cleartext HTTP.

In NGINX Controller 3.0.0-3.4.0, recovery code required to change a user's password is transmitted and stored in the database in plain text, which allows an attacker who can intercept the database connection or have read access to the database, to request a password reset using the email address of another registered user then retrieve the recovery code.

BMC Control-M/Agent 7.0.00.000 has Insecure Password Storage.

A password disclosure vulnerability in the Secure PDF eXchange (SPX) feature allows attackers with full email access to decrypt PDFs in Sophos Firewall version 19.5 MR3 (19.5.3) and older, if the password type is set to “Specified by sender”.

SuiteCRM 7.10.x prior to 7.10.21 and 7.11.x prior to 7.11.9 mishandles API access tokens and credentials.

D-Link DSL-2875AL devices through 1.00.05 are prone to password disclosure via a simple crafted /romfile.cfg request to the web management server. This request doesn't require any authentication and will lead to saving the configuration file. The password is stored in cleartext.

D-Link DSL-2875AL and DSL-2877AL devices through 1.00.05 are prone to information disclosure via a simple crafted request to index.asp on the web management server because of username_v and password_v variables.

NETSAS Enigma NMS 65.0.0 and prior utilises basic authentication over HTTP for enforcing access control to the web application. The use of weak authentication transmitted over cleartext protocols can allow an attacker to steal username and password combinations by intercepting authentication traffic in transit.

Apache CXF ships with a OpenId Connect JWK Keys service, which allows a client to obtain the public keys in JWK format, which can then be used to verify the signature of tokens issued by the service. Typically, the service obtains the public key from a local keystore (JKS/PKCS12) by specifing the path of the keystore and the alias of the keystore entry. This case is not vulnerable. However it is also possible to obtain the keys from a JWK keystore file, by setting the configuration parameter "rs.security.keystore.type" to "jwk". For this case all keys are returned in this file "as is", including all private key and secret key credentials. This is an obvious security risk if the user has configured the signature keystore file with private or secret key credentials. From CXF 3.3.5 and 3.2.12, it is mandatory to specify an alias corresponding to the id of the key in the JWK file, and only this key is returned. In addition, any private key information is omitted by default. "oct" keys, which contain secret keys, are not returned at all.

Comba AP2600-I devices through A02,0202N00PD2 are prone to password disclosure via an insecure authentication mechanism. The HTML source code of the login page contains values that allow obtaining the username and password. The username are password values are a double md5 of the plaintext real value, i.e., md5(md5(value)).

An issue was discovered in TeamViewer 14.2.2558. Updating the product as a non-administrative user requires entering administrative credentials into the GUI. Subsequently, these credentials are processed in Teamviewer.exe, which allows any application running in the same non-administrative user context to intercept them in cleartext within process memory. By using this technique, a local attacker is able to obtain administrative credentials in order to elevate privileges. This vulnerability can be exploited by injecting code into Teamviewer.exe which intercepts calls to GetWindowTextW and logs the processed credentials.

Cloud Foundry BOSH 270.x versions prior to v270.1.1, contain a BOSH Director that does not properly redact credentials when configured to use a MySQL database. A local authenticated malicious user may read any credentials that are contained in a BOSH manifest.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Unencrypted storage of passwords in the project could allow an attacker with access to port 10005/tcp to obtain passwords of the device. The security vulnerability could be exploited by an unauthenticated attacker with network access to port 10005/tcp. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confidentiality of the device. At the time of advisory publication no public exploitation of this security vulnerability was known

In WFTPD 3.25, usernames and password hashes are stored in an openly viewable wftpd.ini configuration file within the WFTPD directory. NOTE: this is a product from 2006.

Zebra Industrial Printers All Versions, Zebra printers are shipped with unrestricted end-user access to front panel options. If the option to use a passcode to limit the functionality of the front panel is applied, specially crafted packets could be sent over the same network to a port on the printer and the printer will respond with an array of information that includes the front panel passcode for the printer. Once the passcode is retrieved, an attacker must have physical access to the front panel of the printer to enter the passcode to access the full functionality of the front panel.

IBM CICS Transaction Gateway for Multiplatforms 9.2 and 9.3 transmits or stores authentication credentials, but it uses an insecure method that is susceptible to unauthorized interception and/or retrieval.

An insufficiently protected credentials vulnerability exists in Jenkins Repository Connector Plugin 1.2.4 and earlier in src/main/java/org/jvnet/hudson/plugins/repositoryconnector/ArtifactDeployer.java, src/main/java/org/jvnet/hudson/plugins/repositoryconnector/Repository.java, src/main/java/org/jvnet/hudson/plugins/repositoryconnector/UserPwd.java that allows an attacker with local file system access or control of a Jenkins administrator's web browser (e.g. malicious extension) to retrieve the password stored in the plugin configuration.

Jenkins Bitbucket OAuth Plugin 0.9 and earlier stored credentials unencrypted in the global config.xml configuration file on the Jenkins master where they could be viewed by users with access to the master file system.

A vulnerability, which was classified as problematic, has been found in SourceCodester Prison Management System 1.0. This issue affects some unknown processing of the file /uploadImage/Profile/ of the component Profile Image Handler. The manipulation leads to insufficiently protected credentials. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

An issue found in DERICIA Co. Ltd, DELICIA v.13.6.1 allows a remote attacker to gain access to sensitive information via the channel access token in the miniapp DELICIA function.

Jenkins Zulip Plugin 1.1.0 and earlier stored credentials unencrypted in its global configuration file on the Jenkins master where they could be viewed by users with access to the master file system.

typed-rest-client is a library for Node Rest and Http Clients with typings for use with TypeScript. Users of the typed-rest-client library version 1.7.3 or lower are vulnerable to leak authentication data to 3rd parties. The flow of the vulnerability is as follows: First, send any request with `BasicCredentialHandler`, `BearerCredentialHandler` or `PersonalAccessTokenCredentialHandler`. Second, the target host may return a redirection (3xx), with a link to a second host. Third, the next request will use the credentials to authenticate with the second host, by setting the `Authorization` header. The expected behavior is that the next request will *NOT* set the `Authorization` header. The problem was fixed in version 1.8.0. There are no known workarounds.

A vulnerability, which was classified as critical, was found in LB-LINK BL-AC3600 up to 1.0.22. This affects the function geteasycfg of the file /cgi-bin/lighttpd.cgi of the component Web Management Interface. The manipulation of the argument Password leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The local Vuforia web application does not support HTTPS, and federated credentials are passed via basic authentication.

Missing Password Field Masking vulnerability in Hitachi Device Manager on Windows, Linux (Device Manager Agent component).This issue affects Hitachi Device Manager: before 8.8.5-04.

Jenkins Dynatrace Application Monitoring Plugin 2.1.3 and earlier stored credentials unencrypted in its global configuration file on the Jenkins master where they could be viewed by users with access to the master file system.

During HE deployment via cockpit-ovirt, cockpit-ovirt generates an ansible variable file `/var/lib/ovirt-hosted-engine-setup/cockpit/ansibleVarFileXXXXXX.var` which contains the admin and the appliance passwords as plain-text. At the of the deployment procedure, these files are deleted.

Apereo CAS is an open source multilingual single sign-on solution for the web. Apereo CAS can be configured to use authentication based on client X509 certificates. These certificates can be provided via TLS handshake or a special HTTP header, such as “ssl_client_cert”. When checking the validity of the provided client certificate, X509CredentialsAuthenticationHandler performs check that this certificate is not revoked. To do so, it fetches URLs provided in the “CRL Distribution Points” extension of the certificate, which are taken from the certificate itself and therefore can be controlled by a malicious user. If the CAS server is configured to use an LDAP server for x509 authentication with a password, for example by setting a “cas.authn.x509.ldap.ldap-url” and “cas.authn.x509.ldap.bind-credential” properties, X509CredentialsAuthenticationHandler fetches revocation URLs from the certificate, which can be LDAP urls. When making requests to this LDAP urls, Apereo CAS uses the same password as for initially configured LDAP server, which can lead to a password leak. An unauthenticated user can leak the password used to LDAP connection configured on server. This issue has been addressed in version 6.6.6. Users are advised to upgrade. There are no known workarounds for this vulnerability.

An elevation of privilege vulnerability exists when the Windows Kernel improperly handles key enumeration, aka 'Windows Kernel Elevation of Privilege Vulnerability'.

In Apache Kylin version 2.0.0 to 4.0.3, there is a Server Config web interface that displays the content of file 'kylin.properties', that may contain serverside credentials. When the kylin service runs over HTTP (or other plain text protocol), it is possible for network sniffers to hijack the HTTP payload and get access to the content of kylin.properties and potentially the containing credentials. To avoid this threat, users are recommended to  * Always turn on HTTPS so that network payload is encrypted. * Avoid putting credentials in kylin.properties, or at least not in plain text. * Use network firewalls to protect the serverside such that it is not accessible to external attackers. * Upgrade to version Apache Kylin 4.0.4, which filters out the sensitive content that goes to the Server Config web interface.

A password management issue exists where the Organization authentication username and password were stored in plaintext in log files. A locally authenticated attacker who is able to access these stored plaintext credentials can use them to login to the Organization. Affected products are: Juniper Networks Service Insight versions from 15.1R1, prior to 18.1R1. Service Now versions from 15.1R1, prior to 18.1R1.

An HPE OneView appliance dump may expose SAN switch administrative credentials

An information disclosure vulnerability exists in SAP GUI for Windows - versions < 7.60 PL13, 7.70 PL4, which allows an attacker with sufficient privileges on the local client-side PC to obtain an equivalent of the user’s password. With this highly sensitive data leaked, the attacker would be able to logon to the backend system the SAP GUI for Windows was connected to and launch further attacks depending on the authorizations of the user.

A flaw was found in the RHDM, where sensitive HTML form fields like Password has auto-complete enabled which may lead to leak of credentials.

NVIDIA DGX H100 BMC contains a vulnerability in IPMI, where an attacker may cause insufficient protection of credentials. A successful exploit of this vulnerability may lead to information disclosure.

Aten PE8108 2.4.232 is vulnerable to Incorrect Access Control. The device allows unauthenticated access to Telnet and SNMP credentials.

AMI MegaRAC SPX devices allow Password Disclosure through Redfish. The fixed versions are SPx_12-update-7.00 and SPx_13-update-5.00.

In Unisys Stealth (core) before 6.0.025.0, the Keycloak password is stored in a recoverable format that might be accessible by a local attacker, who could gain access to the Management Server and change the Stealth configuration.

Milesight NCR/camera version 71.8.0.6-r5 exposes credentials through an unspecified request.

An uspecified endpoint in the web server of the switch does not properly authenticate the user identity, and may allow downloading a config page with the password to the switch in clear text.

Plaintext Password in Registry vulnerability in 42gears surelock windows surelockwinsetupv2.40.0.Exe on Windows (Registery modules) allows Retrieve Admin user credentials This issue affects surelock windows: from 2.3.12 through 2.40.0.

IBM Aspera Connect 4.2.5 and IBM Aspera Cargo 4.2.5 transmits authentication credentials, but it uses an insecure method that is susceptible to unauthorized interception and/or retrieval.

Sunell DVR, latest version, Insufficiently Protected Credentials (CWE-522) may be exposed through an unspecified request.

An issue was discovered in Mattermost Server before 5.4.0. It mishandles possession of superfluous authentication credentials.

In pam/gkr-pam-module.c in GNOME Keyring before 3.27.2, the user's password is kept in a session-child process spawned from the LightDM daemon. This can expose the credential in cleartext.

The Sovremennye Delovye Tekhnologii FX Aggregator terminal client 1 stores authentication credentials in cleartext in login.sav when the Save Password box is checked.

An issue was discovered in AdGuard before 0.105.2. An attacker able to get the user's cookie is able to bruteforce their password offline, because the hash of the password is stored in the cookie.