Controller DoS due to buffer overflow in the handling of a specially crafted message received by the controller. See Honeywell Security Notification for recommendations on upgrading and versioning. See Honeywell Security Notification for recommendations on upgrading and versioning.
Server or Console Station DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation. See Honeywell Security Notification for recommendations on upgrading and versioning.
Experion server may experience a DoS due to a heap overflow which could occur when handling a specially crafted message
Controller DoS due to stack overflow when decoding a message from the server. See Honeywell Security Notification for recommendations on upgrading and versioning.
Experion server DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation. See Honeywell Security Notification for recommendations on upgrading and versioning.
Uncontrolled Resource Consumption vulnerability in Honeywell Niagara Framework on Windows, Linux, QNX allows Content Spoofing.This issue affects Niagara Framework: before Niagara AX 3.8.1, before Niagara 4.1.
Honeywell Experion PKS C200, C200E, C300, and ACE controllers are vulnerable to relative path traversal, which may allow an attacker access to unauthorized files and directories.
Missing Authentication for Critical Function vulnerability in Honeywell OneWireless allows Authentication Bypass. This issue affects OneWireless version 322.1
C300 information leak due to an analysis feature which allows extracting more memory over the network than required by the function. Honeywell recommends updating to the most recent version of the product. See Honeywell Security Notification for recommendations on upgrading and versioning.
Server information leak of configuration data when an error is generated in response to a specially crafted message. See Honeywell Security Notification for recommendations on upgrading and versioning.
Controller DoS may occur due to buffer overflow when an error is generated in response to a specially crafted message. See Honeywell Security Notification for recommendations on upgrading and versioning.
Some parsing functions in the affected product do not check the return value of malloc and the thread handling the message is forced to close, which may lead to a denial-of-service condition on the OPC UA Tunneller (versions prior to 6.3.0.8233).
The affected product has uncontrolled resource consumption issues, which may allow an attacker to cause a denial-of-service condition on the OPC UA Tunneller (versions prior to 6.3.0.8233).
The Honeywell Experion PKS contains an Uninitialized Variable in the common Epic Platform Analyzer (EPA) communications. An attacker could potentially exploit this vulnerability, leading to a Communication Channel Manipulation, which results in a dereferencing of an uninitialized pointer leading to a denial of service. Honeywell recommends updating to the most recent version of Honeywell Experion PKS: 520.2 TCU9 HF1and 530.1 TCU3 HF1. The affected Experion PKS products are C300 PCNT02, EHB, EHPM, ELMM, Classic ENIM, ETN, FIM4, FIM8, PGM, and RFIM. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3.
ControlEdge PLC (R130.2, R140, R150, and R151) and RTU (R101, R110, R140, R150, and R151) exposes unencrypted passwords on the network.
ControlEdge PLC (R130.2, R140, R150, and R151) and RTU (R101, R110, R140, R150, and R151) exposes a session token on the network.
Honeywell equIP series IP cameras Multiple equIP Series Cameras, A vulnerability exists in the affected products where a specially crafted HTTP packet request could result in a denial of service.
Honeywell equIP and Performance series IP cameras, multiple versions, A vulnerability exists where the affected product allows unauthenticated access to audio streaming over HTTP.
An arbitrary memory write vulnerability exists in the dual_onsrv.exe module in Honeywell Experion PKS R40x before R400.6, R41x before R410.6, and R43x before R430.2, that could lead to possible remote code execution or denial of service. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.
Stack-based buffer overflow in the HMIWeb Browser HSCDSPRenderDLL ActiveX control in Honeywell Process Solutions (HPS) Experion R2xx, R30x, R31x, and R400.x; Honeywell Building Solutions (HBS) Enterprise Building Manager R400 and R410.1; and Honeywell Environmental Combustion and Controls (ECC) SymmetrE R410.1 allows remote attackers to execute arbitrary code via unspecified vectors.
Server communication with a controller can lead to remote code execution using a specially crafted message from the controller. See Honeywell Security Notification for recommendations on upgrading and versioning.
Server information leak for the CDA Server process memory can occur when an error is generated in response to a specially crafted message. See Honeywell Security Notification for recommendations on upgrading and versioning.
The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to manipulate memory with controlled values and remotely execute code on the OPC UA Tunneller (versions prior to 6.3.0.8233).
A CWE-787: Out-of-bounds Write vulnerability exists that could cause sensitive information leakage when accessing a malicious web page from the commissioning software. Affected Products: SoMachine HVAC (Versions prior to V2.1.0), EcoStruxure Machine Expert – HVAC (Versions prior to V1.4.0)
An attacker could send crafted SMTP packets to cause a denial-of-service condition where the controller enters a major non-recoverable faulted state (MNRF) in CompactLogix 5370 L1, L2, and L3 Controllers, Compact GuardLogix 5370 controllers, and Armor Compact GuardLogix 5370 Controllers Versions 20 - 30 and earlier.
A stack overflow in the UpdateWanMode function of H3C Magic B1STV100R012 allows attackers to cause a Denial of Service (DoS) via a crafted POST request.
In Wireshark 2.4.0 to 2.4.13, 2.6.0 to 2.6.7, and 3.0.0, the DOF dissector could crash. This was addressed in epan/dissectors/packet-dof.c by properly handling generated IID and OID bytes.
TOTOLINK A3100R V4.1.2cu.5050_B20200504 and V4.1.2cu.5247_B20211129 were discovered to contain a stack overflow via the macAddress parameter in the function setMacQos. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request.
A heap-based buffer overflow in a network service in Fastweb FASTGate MediaAccess FGA2130FWB, firmware version 18.3.n.0482_FW_230_FGA2130, and DGA4131FWB, firmware version up to 18.3.n.0462_FW_261_DGA4131, allows a remote attacker to reboot the device through a crafted HTTP request, causing DoS.
Tenda AX1806 v1.0.0.1 was discovered to contain a stack overflow via the wanMTU parameter in the function fromAdvSetMacMtuWan. This vulnerability allows attackers to cause a Denial of Service (DoS).
Tenda AX1806 v1.0.0.1 was discovered to contain a stack overflow via the shareSpeed parameter in the function fromSetWifiGusetBasic. This vulnerability allows attackers to cause a Denial of Service (DoS).
Totolink A3600R V4.1.2cu.5182_B20201102 was discovered to contain a stacker overflow in the fread function at infostat.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via the parameter CONTENT_LENGTH.
Zoom On-Premise Meeting Connector Zone Controller (ZC) before version 4.8.20220419.112 fails to properly parse STUN error codes, which can result in memory corruption and could allow a malicious actor to crash the application. In versions older than 4.8.12.20211115, this vulnerability could also be leveraged to execute arbitrary code.
TOTOLINK A3100R V4.1.2cu.5050_B20200504 and V4.1.2cu.5247_B20211129 were discovered to contain a stack overflow via the comment parameter in the function setIpQosRules. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request.
Tenda AC15 US_AC15V1.0BR_V15.03.05.20_multi_TDE01.bin is vulnerable to Buffer Overflow. The stack overflow vulnerability lies in the /goform/setpptpservercfg interface of the web. The sent post data startip and endip are copied to the stack using the sanf function, resulting in stack overflow. Similarly, this vulnerability can be used together with CVE-2021-44971
A heap buffer overflow vulnerability exists in the Netwide Assembler (NASM) due to a lack of bounds checking in the obj_directive() function. This vulnerability can be exploited by a user assembling a malicious .asm file, potentially leading to heap memory corruption, denial of service (crash), and arbitrary code execution.
Multiple Denial-of-Service vulnerabilities was discovered in the F-Secure Atlant and in certain WithSecure products while scanning fuzzed PE32-bit files cause memory corruption and heap buffer overflow which eventually can crash the scanning engine. The exploit can be triggered remotely by an attacker.
Tenda AX1806 v1.0.0.1 was discovered to contain a heap overflow via the mac parameter in the function GetParentControlInfo. This vulnerability allows attackers to cause a Denial of Service (DoS).
In GNOME Epiphany before 41.4 and 42.x before 42.2, an HTML document can trigger a client buffer overflow (in ephy_string_shorten in the UI process) via a long page title. The issue occurs because the number of bytes for a UTF-8 ellipsis character is not properly considered.
Tenda AX1806 v1.0.0.1 was discovered to contain a stack overflow via the timeZone parameter in the function form_fast_setting_wifi_set. This vulnerability allows attackers to cause a Denial of Service (DoS).
Tenda AX12 v22.03.01.21_cn was discovered to contain a stack overflow via the lanIp parameter in /goform/AdvSetLanIp.
D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formWlanSetup. This vulnerability allows attackers to cause a Denial of Service (DoS) via the webpage parameter.
NASM’s disasm() function contains a stack based buffer overflow when formatting disassembly output, allowing an attacker triggered out-of-bounds write when `slen` exceeds the buffer capacity.
D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formAdvanceSetup. This vulnerability allows attackers to cause a Denial of Service (DoS) via the webpage parameter.
D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanPPTP. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.
D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formWlanWizardSetup. This vulnerability allows attackers to cause a Denial of Service (DoS) via the webpage parameter.
D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanDhcpplus. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.
A flaw was found in Blender 3.3.0. An interger overflow in source/blender/blendthumb/src/blendthumb_extract.cc may lead to program crash or memory corruption.
A vulnerability in bmcweb of OpenBMC Project allows user to cause denial of service. When fuzzing the multipart_parser code using AFL++ with address sanitizer enabled to find smallest memory corruptions possible. It detected problem in how multipart_parser handles unclosed http headers. If long enough http header is passed in the multipart form without colon there is one byte overwrite on heap. It can be conducted multiple times in a loop to cause DoS.
D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanNonLogin. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.