An issue was discovered on AudioCodes VoIP desk phones through 3.4.4.1000. Due to the use of a hard-coded cryptographic key, an attacker is able to decrypt encrypted configuration files and retrieve sensitive information.

An issue was discovered in AudioCodes One Voice Operations Center (OVOC) before 8.4.582. Due to the use of a hard-coded key, an attacker is able to decrypt sensitive data such as passwords extracted from the topology file.

An issue was discovered in AudioCodes One Voice Operations Center (OVOC) before 8.4.582. Due to a path traversal vulnerability, sensitive data can be read without any authentication.

An issue was discovered in AudioCodes Mediant Session Border Controller (SBC) before 7.40A.501.841. Due to the use of weak password obfuscation/encryption, an attacker with access to configuration exports (INI) is able to decrypt the passwords.

An issue was discovered on AudioCodes Mediant 500L-MSBR, 500-MBSR, M800B-MSBR and 800C-MSBR devices with firmware versions F7.20A to F7.20A.251. An internal interface exposed to the link-local address 169.254.254.253 allows attackers in the local network to access multiple quagga VTYs. Attackers can authenticate with the default 1234 password that cannot be changed, and can execute malicious and unauthorized actions.

Brocade SANnav OVA before v2.3.1 and v2.3.0a contain hard-coded credentials in the documentation that appear as the appliance's root password. The vulnerability could allow an unauthenticated attacker full access to the Brocade SANnav appliance.

Use of Hard-coded Password vulnerability in Mitsubishi Electric GX Works3 versions from 1.000A to 1.090U and GT Designer3 Version1 (GOT2000) versions from 1.122C to 1.290C allows an unauthenticated attacker to disclose sensitive information. As a result, unauthenticated users may view programs and project files or execute programs illegally.

This vulnerability affects all of the company's products that also include the FW versions: update_i90_cv2.021_b20210104, update_i50_v1.0.55_b20200509, update_x6_v2.1.2_b202001127, update_b5_v2.0.9_b20200706. This vulnerability makes it possible to extract from the FW the existing user passwords on their operating systems and passwords.

Use of Hard-coded Cryptographic Key vulnerability in Mitsubishi Electric GX Works3 versions from 1.000A and later allows a remote unauthenticated attacker to disclose sensitive information. As a result, unauthenticated attackers may view programs and project file or execute programs illegally.

The Cellebrite UFED physical device 5.0 through 7.5.0.845 relies on key material hardcoded within both the executable code supporting the decryption process, and within the encrypted files themselves by using a key enveloping technique. The recovered key material is the same for every device running the same version of the software, and does not appear to be changed with each new build. It is possible to reconstruct the decryption process using the hardcoded key material and obtain easy access to otherwise protected data.

The Secure Monitor in Microchip Atmel ATSAMA5 products use a hardcoded key to encrypt and authenticate secure applets.

On Verizon 5G Home LVSKIHP InDoorUnit (IDU) 3.4.66.162 and OutDoorUnit (ODU) 3.33.101.0 devices, the CRTC and ODU RPC endpoints rely on a static certificate for access control. This certificate is embedded in the firmware, and is identical across the fleet of devices. An attacker need only download this firmware and extract the private components of these certificates (from /etc/lighttpd.d/ca.pem and /etc/lighttpd.d/server.pem) to gain access. (The firmware download location is shown in a device's upgrade logs.)

Delta Industrial Automation DIALink versions 1.4.0.0 and prior are vulnerable to the use of a hard-coded cryptographic key which could allow an attacker to decrypt sensitive data and compromise the machine.

An Authentication Bypass vulnerability exists in the web interface in Zavio IP Cameras through 1.6.03 due to a hardcoded admin account found in boa.conf, which lets a remote malicious user obtain sensitive information.

A Security Bypass vulnerability exists in TP-LINK IP Cameras TL-SC 3130, TL-SC 3130G, 3171G, 4171G, and 3130 1.6.18P12 due to default hard-coded credentials for the administrative Web interface, which could let a malicious user obtain unauthorized access to CGI files.

Verax NMS prior to 2.1.0 uses an encryption key that is hardcoded in a JAR archive.

A vulnerability has been discovered in the firmware of Paxton Paxton10 before 4.6 SR6. The firmware file, rootfs.tar.gz, contains hard-coded credentials for the Twilio API. A remote attacker who obtains a copy of the firmware can extract these credentials. This could allow the attacker to gain unauthorized access to the associated Twilio account, leading to information disclosure, potential service disruption, and unauthorized use of the Twilio services.

Usage of hard-coded cryptographic keys to encrypt configuration files and debug logs in FortiAuthenticator versions before 6.3.0 may allow an attacker with access to the files or the CLI configuration to decrypt the sensitive data, via knowledge of the hard-coded key.

The SNMP daemon in UTStarcom F1000 VOIP WIFI Phone s2.0 running VxWorks 5.5.1 with kernel WIND 2.6 has hard-coded public credentials that cannot be changed, which allows attackers to obtain sensitive information.

RunAsSpc 4.0 uses a universal and recoverable encryption key. In possession of a file encrypted by RunAsSpc, an attacker can recover the credentials that were used.

Cisco IP Phone (VoIP) 7920 1.0(8) contains certain hard-coded ("fixed") public and private SNMP community strings that cannot be changed, which allows remote attackers to obtain sensitive information.

Ovarro TBox TWinSoft uses the custom hardcoded user “TWinSoft” with a hardcoded key.

IBM Security Verify Bridge contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 196618.

Use of a hard-coded cryptographic key to encrypt password data in CLI configuration in FortiManager 6.2.3 and below, FortiAnalyzer 6.2.3 and below may allow an attacker with access to the CLI configuration or the CLI backup file to decrypt the sensitive data, via knowledge of the hard-coded key.

Use of Hard-coded Password vulnerability in Mitsubishi Electric Corporation GX Works3 versions from 1.015R to 1.095Z allows a remote unauthenticated attacker to obtain information about the project file for MELSEC safety CPU modules.

A hardcoded cryptographic key in Automation360 22 allows an attacker to decrypt exported RPA packages.

ZTE E8810/E8820/E8822 series routers have an information leak vulnerability, which is caused by hard-coded MQTT service access credentials on the device. The remote attacker could use this credential to connect to the MQTT server, so as to obtain information about other devices by sending specific topics. This affects:<ZXHN E8810, ZXHN E8820, ZXHN E8822><E8810 V1.0.26, E8810 V2.0.1, E8820 V1.1.3L, E8820 V2.0.13, E8822 V2.0.13>

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, the affected products use a hard-coded cryptographic key, increasing the possibility that confidential data can be recovered.

IBM QRadar 7.3.0 to 7.3.3 Patch 2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-ForceID: 175845.

IBM QRadar Network Security 5.4.0 and 5.5.0 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 174337.

Isode SWIFT v4.0.2 was discovered to contain hard-coded credentials in the Registry Editor. This allows attackers to access sensitive information such as user credentials and certificates.

The MobileIron agents through 2021-03-22 for Android and iOS contain a hardcoded API key, used to communicate with the MobileIron SaaS discovery API, as demonstrated by Mobile@Work (aka com.mobileiron). The key is in com/mobileiron/registration/RegisterActivity.java and can be used for api/v1/gateway/customers/servers requests. NOTE: Vendor states that this is an opt-in feature to the product - it is not enabled by default and customers cannot enable it without an explicit email to support. At this time, they do not plan change to make any changes to this feature.

The D-Link router DIR-880L 1.07 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

The D-Link router DIR-868L 3.01 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

An issue was discovered on Athom Homey and Homey Pro devices before 5.0.0. ZigBee hub devices should generate a unique Standard Network Key that is then exchanged with all enrolled devices so that all inter-device communication is encrypted. However, the cited Athom products use another widely known key that is designed for testing purposes: "01030507090b0d0f00020406080a0c0d" (the decimal equivalent of 1 3 5 7 9 11 13 15 0 2 4 6 8 10 12 13), which is human generated and static across all issued devices.

The D-link router DIR-885L-MFC 1.15b02, v1.21b05 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

Use of Hard-coded Credentials vulnerability in PAVO Inc. PAVO Pay allows Read Sensitive Constants Within an Executable.This issue affects PAVO Pay: before 13.05.2025.

auth_db_config.py in Pyftpd 0.8.4 contains hard-coded usernames and passwords for the (1) test, (2) user, and (3) roxon accounts, which allows remote attackers to read arbitrary files from the FTP server.

IBM Concert Software 1.0.0 through 1.1.0 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.

Live.me - live stream video chat, 3.7.20, 2017-11-06, Android application uses a hard-coded key for encryption. Data stored using this key can be decrypted by anyone able to access this key.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Project data stored on the device, which is accessible via port 10005/tcp, can be decrypted due to a hardcoded encryption key. The security vulnerability could be exploited by an unauthenticated attacker with network access to port 10005/tcp. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confidentiality of the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

Use of Hard-coded Credentials in temi Robox OS prior to 120, temi Android app up to 1.3.7931 allows remote attackers to listen in on any ongoing calls between temi robots and their users if they can brute-force/guess a six-digit value via unspecified vectors.

On Xiaomi router AX1800 rom version < 1.0.336 and RM1800 root version < 1.0.26, the encryption scheme for a user's backup files uses hard-coded keys, which can expose sensitive information such as a user's password.

NVIDIA DGX servers, all BMC firmware versions prior to 3.38.30, contain a vulnerability in the AMI BMC firmware in which it uses a hard-coded RC4 cipher key, which may lead to information disclosure.

An issue was discovered in Programi Bilanc build 007 release 014 31.01.2020 and possibly below. It relies on broken encryption with a weak and guessable static encryption key.

NVIDIA DGX servers, DGX-1 with BMC firmware versions prior to 3.38.30. DGX-2 with BMC firmware versions prior to 1.06.06 and all DGX A100 Servers with all BMC firmware versions, contains a vulnerability in the AMI BMC firmware in which the use of a hard-coded RSA 1024 key with weak ciphers may lead to information disclosure.

A CWE-798: Use of Hardcoded Credentials vulnerability exists in Modicon Controllers (All versions of the following CPUs and Communication Module product references listed in the Security Notifications), which could cause the disclosure of FTP hardcoded credentials when using the Web server of the controller on an unsecure network.

The optional Web Screens feature for Sage 300 through version 2022 uses a hard-coded 40-byte blowfish key ("PASS_KEY") to encrypt and decrypt the database connection string for the PORTAL database found in the "dbconfig.xml". This issue could allow attackers to obtain access to the SQL database.