An issue was discovered in libac_des3.so on AudioCodes VoIP desk phones through 3.4.4.1000. Due to the use of hard-coded cryptographic key, an attacker with access to backup or configuration files is able to decrypt encrypted values and retrieve sensitive information, e.g., the device root password.

An issue was discovered in AudioCodes One Voice Operations Center (OVOC) before 8.4.582. Due to a path traversal vulnerability, sensitive data can be read without any authentication.

An issue was discovered in AudioCodes Mediant Session Border Controller (SBC) before 7.40A.501.841. Due to the use of weak password obfuscation/encryption, an attacker with access to configuration exports (INI) is able to decrypt the passwords.

An issue was discovered in AudioCodes One Voice Operations Center (OVOC) before 8.4.582. Due to the use of a hard-coded key, an attacker is able to decrypt sensitive data such as passwords extracted from the topology file.

An issue was discovered on AudioCodes Mediant 500L-MSBR, 500-MBSR, M800B-MSBR and 800C-MSBR devices with firmware versions F7.20A to F7.20A.251. An internal interface exposed to the link-local address 169.254.254.253 allows attackers in the local network to access multiple quagga VTYs. Attackers can authenticate with the default 1234 password that cannot be changed, and can execute malicious and unauthorized actions.

The configuration file is encrypted with a static key derived from a static five-character password which allows an attacker to decrypt this file. The application hashes this five-character password with the outdated and broken MD5 algorithm (no salt) and uses the first five bytes as the key for RC4. The configuration file is then encrypted with these parameters.

Apache Doris, prior to 1.0.0, used a hardcoded key and IV to initialize the cipher used for ldap password, which may lead to information disclosure.

Shenzen Tenda Technology IP Camera CP3 V11.10.00.2211041355 was discovered to contain a hard-coded default password for root which is stored using weak encryption. This vulnerability allows attackers to connect to the TELNET service (or UART) by using the exposed credentials.

A hardcoded credentials vulnerability exists in Verint 5620PTZ Verint_FW_0_42, Verint 4320 V4320_FW_0_23, V4320_FW_0_31, and Verint S5120FD Verint_FW_0_42units. This could cause a confidentiality issue when using the FTP, Telnet, or SSH protocols.

auth_db_config.py in Pyftpd 0.8.4 contains hard-coded usernames and passwords for the (1) test, (2) user, and (3) roxon accounts, which allows remote attackers to read arbitrary files from the FTP server.

'OfferBox' App for Android versions 2.0.0 to 2.3.17 and 'OfferBox' App for iOS versions 2.1.7 to 2.6.14 use a hard-coded secret key for JWT. Secret key for JWT may be retrieved if the application binary is reverse-engineered.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a hard code password for the telnet service which is stored in the component /etc/config/product.ini.

A hardcoded privileged ID within Lumisxp v15.0.x to v16.1.x allows attackers to bypass authentication and access internal pages and other sensitive information.

Selfwealth iOS mobile App 3.3.1 is vulnerable to Sensitive key disclosure. The application reveals hardcoded API keys.

An issue was discovered on the D-Link DWR-932B router. There is a hardcoded WPS PIN of 28296607.

Vulnerability in the Elasticsearch database used in the of Cisco SD-WAN vManage software could allow an unauthenticated, remote attacker to access the Elasticsearch configuration database of an affected device with the privileges of the elasticsearch user. These vulnerability is due to the presence of a static username and password configured on the vManage. An attacker could exploit this vulnerability by sending a crafted HTTP request to a reachable vManage on port 9200. A successful exploit could allow the attacker to view the Elasticsearch database content. There are workarounds that address this vulnerability.

Use of Hard-coded Password vulnerability in FTP function on Mitsubishi Electric Corporation MELSEC iQ-R Series EtherNet/IP module RJ71EIP91 and MELSEC iQ-F Series EtherNet/IP module FX5-ENET/IP allows a remote unauthenticated attacker to obtain a hard-coded password and access to the module via FTP.

IBM Security Verify Access Appliance 10.0.0 through 10.0.7 contains hard-coded credentials which it uses for its own inbound authentication that could be obtained by a malicious actor. IBM X-Force ID: 287317.

Use of Hard-coded Credentials in temi Robox OS prior to 120, temi Android app up to 1.3.7931 allows remote attackers to listen in on any ongoing calls between temi robots and their users if they can brute-force/guess a six-digit value via unspecified vectors.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices use the same hardcoded /etc/stunnel.key private key across different customers' installations, which allows remote attackers to defeat the HTTPS cryptographic protection mechanisms by leveraging knowledge of this key from another installation.

Some Dahua software products have a vulnerability of using of hard-coded cryptographic key. An attacker can obtain the AES crypto key by exploiting this vulnerability.

Live.me - live stream video chat, 3.7.20, 2017-11-06, Android application uses a hard-coded key for encryption. Data stored using this key can be decrypted by anyone able to access this key.

The optional Global Search feature for Sage 300 through version 2022 uses a set of hard-coded credentials for the accompanying Apache Solr instance. This issue could allow attackers to login to the Solr dashboard with admin privileges and access sensitive information.

The optional Web Screens feature for Sage 300 through version 2022 uses a hard-coded 40-byte blowfish key ("PASS_KEY") to encrypt and decrypt the database connection string for the PORTAL database found in the "dbconfig.xml". This issue could allow attackers to obtain access to the SQL database.

In TOTOLINK A860R V4.1.2cu.5182_B20201027 there is a hard coded password for root in /etc/shadow.sample.

TP-Link Tapo C310 1.3.0 devices allow access to the RTSP video feed via credentials of User --- and Password TPL075526460603.

The SNMP daemon in UTStarcom F1000 VOIP WIFI Phone s2.0 running VxWorks 5.5.1 with kernel WIND 2.6 has hard-coded public credentials that cannot be changed, which allows attackers to obtain sensitive information.

'Hulu / フールー' App for Android from version 3.0.47 to the version prior to 3.1.2 uses a hard-coded API key for an external service. By exploiting this vulnerability, API key for an external service may be obtained by analyzing data in the app.

A hard-coded cryptographic key is used in FileWave before 14.6.3 and 14.7.x before 14.7.2. Exploitation could allow an unauthenticated actor to decrypt sensitive information saved in FileWave, and even send crafted requests.

Dell Enterprise SONiC OS, 4.0.0, 4.0.1, contain a cryptographic key vulnerability in SSH. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to unauthorized access to communication.

Isode SWIFT v4.0.2 was discovered to contain hard-coded credentials in the Registry Editor. This allows attackers to access sensitive information such as user credentials and certificates.

The Civi - Job Board & Freelance Marketplace WordPress Theme plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.1.4 via hard-coded credentials. This makes it possible for unauthenticated attackers to extract sensitive data including LinkedIn client and secret keys.

Verax NMS prior to 2.1.0 uses an encryption key that is hardcoded in a JAR archive.

Zoho ManageEngine Remote Access Plus before 10.1.2121.1 has hardcoded credentials for read-only access. The credentials are in the source code that corresponds to the DCBackupRestore JAR archive.

The Cellebrite UFED physical device 5.0 through 7.5.0.845 relies on key material hardcoded within both the executable code supporting the decryption process, and within the encrypted files themselves by using a key enveloping technique. The recovered key material is the same for every device running the same version of the software, and does not appear to be changed with each new build. It is possible to reconstruct the decryption process using the hardcoded key material and obtain easy access to otherwise protected data.

Hardcoded .htaccess Credentials for getlogs.cgi exist on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0.

Use of Hard-coded Credentials vulnerability in Utarit Information Technologies SoliPay Mobile App allows Read Sensitive Strings Within an Executable.This issue affects SoliPay Mobile App: before 5.0.8.

Use of Hard-coded Cryptographic Key vulnerability in Mitsubishi Electric GX Works3 versions from 1.000A to 1.090U, GT Designer3 Version1 (GOT2000) versions from 1.122C to 1.290C and Motion Control Setting(GX Works3 related software) versions from 1.035M to 1.042U allows a remote unauthenticated attacker to disclose sensitive information. As a result, unauthenticated users may view programs and project files or execute programs illegally.

Use of Hard-coded Credentials in GitHub repository microweber/microweber prior to 2.0.

Use of hard-coded credentials vulnerability in php component in Synology Calendar before 2.4.0-0761 allows remote attackers to obtain sensitive information via unspecified vectors.

Common encryption key appears to be used across all deployed instances of Serv-U FTP Server. Because of this an encrypted value that is exposed to an attacker can be simply recovered to plaintext.

This vulnerability affects all of the company's products that also include the FW versions: update_i90_cv2.021_b20210104, update_i50_v1.0.55_b20200509, update_x6_v2.1.2_b202001127, update_b5_v2.0.9_b20200706. This vulnerability makes it possible to extract from the FW the existing user passwords on their operating systems and passwords.

It is possible to download the configuration backup without authorization and decrypt included passwords using hardcoded static key.

On Xiaomi router AX1800 rom version < 1.0.336 and RM1800 root version < 1.0.26, the encryption scheme for a user's backup files uses hard-coded keys, which can expose sensitive information such as a user's password.

IBM Security Guardium Key Lifecycle Manager 4.3 contains plain text hard-coded credentials or other secrets in source code repository. IBM X-Force ID: 271220.

Use of Hard-coded Cryptographic Key vulnerability in Mitsubishi Electric GX Works3 versions from 1.000A and later allows a remote unauthenticated attacker to disclose sensitive information. As a result, unauthenticated attackers may view programs and project files or execute programs illegally.

Archery v1.10.0 uses a non-random or static IV for Cipher Block Chaining (CBC) mode in AES encryption. This vulnerability can lead to the disclosure of information and communications.

SuperAGI v0.0.13 was discovered to use a hardcoded key for encryption operations. This vulnerability can lead to the disclosure of information and communications.

IBM Security Identity Manager 7.0.2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 200252.

An issue was discovered on FiberHome HG6245D devices through RP2613. The web management is done over HTTPS, using a hardcoded private key that has 0777 permissions.