A vulnerability was found in Tenda 4G300 1.01.42. It has been classified as critical. This affects the function sub_4260F0. The manipulation of the argument upfilen leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The associated identifier of this vulnerability is VDB-261987. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Tenda 4G300 1.01.42 and classified as critical. Affected by this vulnerability is the function sub_41E858. The manipulation of the argument GO/page leads to stack-based buffer overflow. The attack can be launched remotely. The identifier VDB-261985 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Tenda W15E 15.11.0.14 and classified as critical. This vulnerability affects the function formSetStaticRoute of the file /goform/setStaticRoute. The manipulation of the argument staticRouteIndex leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-261868. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Tenda FH1201 v1.2.0.14 was discovered to contain a stack-based buffer overflow vulnerability via the PPPOEPassword parameter at ip/goform/QuickIndex.

A vulnerability, which was classified as critical, was found in Tenda W15E 15.11.0.14. Affected is the function formAddDnsForward of the file /goform/AddDnsForward. The manipulation of the argument DnsForwardRule leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-261858 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda W15E 15.11.0.14. It has been classified as critical. Affected is the function guestWifiRuleRefresh. The manipulation of the argument qosGuestDownstream leads to stack-based buffer overflow. It is possible to launch the attack remotely. VDB-261870 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

fmwlan.c on D-Link DIR-615Jx10 devices has a stack-based buffer overflow via the formWlanSetup webpage parameter when f_radius_ip1 is malformed.

fmwlan.c on D-Link DIR-615Jx10 devices has a stack-based buffer overflow via the formWlanSetup_Wizard webpage parameter when f_radius_ip1 is malformed.

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. The function do_cgi(), which processes cgi requests supplied to the device's web servers, is vulnerable to a remotely exploitable stack-based buffer overflow. Unauthenticated exploitation is possible by combining this vulnerability with CVE-2020-9277.

A flaw was found in the ptp4l program of the linuxptp package. A missing length check when forwarding a PTP message between ports allows a remote attacker to cause an information leak, crash, or potentially remote code execution. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. This flaw affects linuxptp versions before 3.1.1, before 2.0.1, before 1.9.3, before 1.8.1, before 1.7.1, before 1.6.1 and before 1.5.1.

Multiple stack-based buffer overflows in the API controllers of FortiWeb 6.4.1, 6.4.0, and 6.3.0 through 6.3.15 may allow an authenticated attacker to achieve arbitrary code execution via specially crafted requests.

Redis is an in-memory database that persists on disk. In Redit 7.0 prior to 7.0.12, extracting key names from a command and a list of arguments may, in some cases, trigger a heap overflow and result in reading random heap memory, heap corruption and potentially remote code execution. Several scenarios that may lead to authenticated users executing a specially crafted `COMMAND GETKEYS` or `COMMAND GETKEYSANDFLAGS`and authenticated users who were set with ACL rules that match key names, executing a specially crafted command that refers to a variadic list of key names. The vulnerability is patched in Redis 7.0.12.

TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain an authenticated stack overflow via the sPort/ePort parameter in the setIpPortFilterRules function.

TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain an authenticated stack overflow via the pppoeUser parameter in the setOpModeCfg function.

Amcrest cameras and NVR are vulnerable to a stack-based buffer overflow over port 37777. An authenticated remote attacker can abuse this issue to crash the device and possibly execute arbitrary code.

TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain an authenticated stack overflow via the ip parameter in the setDiagnosisCfg function.

A out-of-bounds write in Fortinet FortiOS version 7.2.0 through 7.2.3, FortiOS version 7.0.0 through 7.0.10, FortiOS version 6.4.0 through 6.4.11, FortiOS version 6.2.0 through 6.2.13, FortiOS all versions 6.0, FortiProxy version 7.2.0 through 7.2.1, FortiProxy version 7.0.0 through 7.0.7, FortiProxy all versions 2.0, FortiProxy all versions 1.2, FortiProxy all versions 1.1, FortiProxy all versions 1.0 allows an authenticated attacker to execute unauthorized code or commands via specifically crafted requests.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contains a post-authentication buffer overflow via parameter sPort/ePort in the addEffect function.

Multiple stack buffer overflow vulnerabilities in Jensen of Scandinavia AS Air:Link 3G (AL3G) version 2.23m (Rev. 3), Air:Link 5000AC (AL5000AC) version 1.13, and Air:Link 59300 (AL59300) version 1.04 (Rev. 4) devices allow remote attackers to execute arbitrary code or crash the web service via the (1) ateFunc, (2) ateGain, (3) ateTxCount, (4) ateChan, (5) ateRate, (6) ateMacID, (7) e2pTxPower1, (8) e2pTxPower2, (9) e2pTxPower3, (10) e2pTxPower4, (11) e2pTxPower5, (12) e2pTxPower6, (13) e2pTxPower7, (14) e2pTx2Power1, (15) e2pTx2Power2, (16) e2pTx2Power3, (17) e2pTx2Power4, (18) e2pTx2Power5, (19) e2pTx2Power6, (20) e2pTx2Power7, (21) ateTxFreqOffset, (22) ateMode, (23) ateBW, (24) ateAntenna, (25) e2pTxFreqOffset, (26) e2pTxPwDeltaB, (27) e2pTxPwDeltaG, (28) e2pTxPwDeltaMix, (29) e2pTxPwDeltaN, and (30) readE2P parameters of the /goform/formWlanMP endpoint.

A vulnerability was found in X.Org. This security flaw occurs because the handler for the XIPassiveUngrab request accesses out-of-bounds memory when invoked with a high keycode or button code. This issue can lead to local privileges elevation on systems where the X server is running privileged and remote code execution for ssh X forwarding sessions.

Software installed and run as a non-privileged user may conduct improper GPU system calls resulting in platform instability and reboots.

An issue was discovered in ksmbd in the Linux kernel 5.15 through 5.19 before 5.19.2. There is a heap-based buffer overflow in set_ntacl_dacl, related to use of SMB2_QUERY_INFO_HE after a malformed SMB2_SET_INFO_HE command.

An authenticated, remote attacker may use a stack based out-of-bounds write vulnerability in the CmpTraceMgr Component of multiple CODESYS products in multiple versions to write data into the stack which can lead to a denial-of-service condition, memory overwriting, or remote code execution.

Multiple exploitable buffer overflow vulnerabilities exist in the PubNub message handler for the "cc" channel of Insteon Hub running firmware version 1012. Specially crafted commands sent through the PubNub service can cause a stack-based buffer overflow overwriting arbitrary data. An attacker should send an authenticated HTTP request to trigger this vulnerability. In cmd g_b, at 0x9d015714, the value for the `grp` key is copied using `strcpy` to the buffer at `$sp+0x280`.This buffer is 16 bytes large, sending anything longer will cause a buffer overflow.

An authenticated, remote attacker may use a out-of-bounds write vulnerability in multiple CODESYS products in multiple versions to write data into memory which can lead to a denial-of-service condition, memory overwriting, or remote code execution.

An authenticated, remote attacker may use a stack based out-of-bounds write vulnerability in the CmpTraceMgr Component of multiple CODESYS products in multiple versions to write data into the stack which can lead to a denial-of-service condition, memory overwriting, or remote code execution.

An authenticated remote attacker may use a stack based out-of-bounds write vulnerability in multiple CODESYS products in multiple versions to write data into the stack which can lead to a denial-of-service condition, memory overwriting, or remote code execution.

An authenticated remote attacker may use a stack based  out-of-bounds write vulnerability in multiple CODESYS products in multiple versions to write data into the stack which can lead to a denial-of-service condition, memory overwriting, or remote code execution.

An authenticated, remote attacker may use a stack based out-of-bounds write vulnerability in the CmpTraceMgr Component of multiple CODESYS products in multiple versions to write data into the stack which can lead to a denial-of-service condition, memory overwriting, or remote code execution.

An authenticated, remote attacker may use a stack based out-of-bounds write vulnerability in the CmpTraceMgr Component of multiple CODESYS products in multiple versions to write data into the stack which can lead to a denial-of-service condition, memory overwriting, or remote code execution.

An authenticated remote attacker may use a stack based out-of-bounds write vulnerability in the CmpTraceMgr Component of multiple CODESYS products in multiple versions to write data into the stack which can lead to a denial-of-service condition, memory overwriting, or remote code execution.

An authenticated remote attacker may use a stack based out-of-bounds write vulnerability in the CmpTraceMgr Component of multiple CODESYS products in multiple versions to write data into the stack which can lead to a denial-of-service condition, memory overwriting, or remote code execution.

An authenticated, remote attacker may use a stack based out-of-bounds write vulnerability in the CmpTraceMgr Component of multiple CODESYS products in multiple versions to write data into the stack which can lead to a denial-of-service condition, memory overwriting, or remote code execution.

A vulnerability was found in X.Org. This security flaw occurs becuase the swap handler for the XTestFakeInput request of the XTest extension may corrupt the stack if GenericEvents with lengths larger than 32 bytes are sent through a the XTestFakeInput request. This issue can lead to local privileges elevation on systems where the X server is running privileged and remote code execution for ssh X forwarding sessions. This issue does not affect systems where client and server use the same byte order.

Buffer Overflow vulnerability in Tenda AX1803 v1.0.0.1_2994 and earlier allows attackers to run arbitrary code via /goform/SetOnlineDevName.

TOTOLINK LR350 V9.3.5u.6369_B20220309 contains a post-authentication buffer overflow via parameter lang in the setLanguageCfg function.

TOTOLINK LR350 V9.3.5u.6369_B20220309 contains a post-authentication buffer overflow via parameter command in the setTracerouteCfg function.

TOTOLINK LR350 V9.3.5u.6369_B20220309 contains a post-authentication buffer overflow via parameter pppoeUser in the setOpModeCfg function.

TOTOLINK LR350 V9.3.5u.6369_B20220309 contains a post-authentication buffer overflow via parameter sPort/ePort in the setIpPortFilterRules function.

TOTOLINK LR350 V9.3.5u.6369_B20220309 contains a post-authentication buffer overflow via parameter week, sTime, and eTime in the setParentalRules function.

TOTOLINK LR350 V9.3.5u.6369_B20220309 contains a post-authentication buffer overflow via parameter ip in the setDiagnosisCfg function.

TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain an authenticated stack overflow via the command parameter in the setTracerouteCfg function.

TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain an authenticated stack overflow via the text parameter in the setSmsCfg function.

Unlimited strcpy on user input when setting a locale file leads to stack buffer overflow in mIPC camera firmware 5.3.1.2003161406.

A vulnerability was found in Tenda O3 1.0.0.10(2478). It has been rated as critical. This issue affects the function fromSafeSetMacFilter of the file /goform/setMacFilterList. The manipulation of the argument time leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-272555. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Stack-based buffer overflow in the *printf function implementations in PostgreSQL before 9.0.19, 9.1.x before 9.1.15, 9.2.x before 9.2.10, 9.3.x before 9.3.6, and 9.4.x before 9.4.1, when running on a Windows system, allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a floating point number with a large precision, as demonstrated by using the to_char function.

Tenda AC9 V15.03.05.19 was discovered to contain a stack overflow via the list parameter at /goform/setPptpUserList.

A remote code execution vulnerability was found in the firmware used in some Lenovo printers, which can be caused by a remote user pushing an illegal string to the server-side interface via a script, resulting in a stack overflow.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in the Contiki-NG operating system (file os/net/ipv6/sicslowpan.c) contains an input function that processes incoming packets and copies them into a packet buffer. Because of a missing length check in the input function, it is possible to write outside the packet buffer's boundary. The vulnerability can be exploited by anyone who has the possibility to send 6LoWPAN packets to a Contiki-NG system. In particular, the vulnerability is exposed when sending either of two types of 6LoWPAN packets: an unfragmented packet or the first fragment of a fragmented packet. If the packet is sufficiently large, a subsequent memory copy will cause an out-of-bounds write with data supplied by the attacker.