IBM Storage Defender - Resiliency Service 2.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 278748.

SnapGathers versions prior to 4.9 are susceptible to a vulnerability which could allow a local authenticated attacker to discover plaintext domain user credentials

An HPE OneView appliance dump may expose OneView user accounts

HPE OneView and HPE OneView Global Dashboard appliance dumps may expose authentication tokens

An HPE OneView appliance dump may expose SNMPv3 read credentials

In Rapid Software LLC's Rapid SCADA versions prior to Version 5.8.4, the affected product stores plaintext credentials in various places. This may allow an attacker with local access to see them.

Previous releases of the Puppet cisco_ios module output SSH session debug information including login credentials to a world readable file on every run. These issues have been resolved in the 0.4.0 release.

A password is exposed locally.

A vulnerability in the web-based management interface of Cisco ATA 190 Series Multiplatform Analog Telephone Adapter firmware could allow an authenticated, local attacker with low privileges to view passwords on an affected device. This vulnerability is due to incorrect sanitization of HTML content from an affected device. A successful exploit could allow the attacker to view passwords that belong to other users.

A vulnerability in the storage method of the PON Controller configuration file could allow an authenticated, local attacker with low privileges to obtain the MongoDB credentials. This vulnerability is due to improper storage of the unencrypted database credentials on the device that is running Cisco IOS XR Software. An attacker could exploit this vulnerability by accessing the configuration files on an affected system. A successful exploit could allow the attacker to view MongoDB credentials.

KNIME Server before 4.12.6 and 4.13.x before 4.13.4 (when installed in unattended mode) keeps the administrator's password in a file without appropriate file access controls, allowing all local users to read its content.

IBM Security Guardium Key Lifecycle Manager 3.0, 3.0.1, 4.0, 4.1, and 4.1.1 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 247601.

A credentials leak flaw was found in OpenStack Barbican. This flaw allows a local authenticated attacker to read the configuration file, gaining access to sensitive credentials.

Ansible before 1.5.5 sets 0644 permissions for sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by reading a file that uses the "deb http://user:pass@server:port/" format.

The web application stores credentials in clear text in the "admin.xml" file, which can be accessed without logging into the website, which could allow an attacker to obtain credentials related to all users, including admin users, in clear text, and use them to subsequently execute malicious actions.

A unprotected storage of credentials in Fortinet FortiSIEM Windows Agent version 4.1.4 and below allows an authenticated user to disclosure agent password due to plaintext credential storage in log files

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 could allow a local attacker to obtain information due to the autocomplete feature on password input fields. IBM X-Force ID: 214345.

IBM Security Verify Bridge 1.0.5.0 stores user credentials in plain clear text which can be read by a locally authenticated user. IBM X-Force ID: 208154.

rubygem-hammer_cli_foreman: File /etc/hammer/cli.modules.d/foreman.yml world readable

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, 4.0, and 4.1 stores user credentials in plain clear text which can be read by a local user. X-Force ID: 212781.

IBM Host Access Transformation Services (HATS) 9.6 through 9.6.1.4 and 9.7 through 9.7.0.3 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 210989.

IBM Maximo Mobile 8.7 and 8.8 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 237407.

A flaw was found in Ansible Galaxy Collections. When collections are built manually, any files in the repository directory that are not explicitly excluded via the ``build_ignore`` list in "galaxy.yml" include files in the ``.tar.gz`` file. This contains sensitive info, such as the user's Ansible Galaxy API key and any secrets in ``ansible`` or ``ansible-playbook`` verbose output without the``no_log`` redaction. Currently, there is no way to deprecate a Collection Or delete a Collection Version. Once published, anyone who downloads or installs the collection can view the secrets.

A vulnerability in the CLI of Cisco Prime Infrastructure and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, local attacker to access sensitive information stored on the underlying file system of an affected system. This vulnerability exists because sensitive information is not sufficiently secured when it is stored. An attacker could exploit this vulnerability by gaining unauthorized access to sensitive information on an affected system. A successful exploit could allow the attacker to create forged authentication requests and gain unauthorized access to the affected system.

A vulnerability in the CLI interface of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to read arbitrary files on the underlying file system of an affected system. This vulnerability exists because access to sensitive information on an affected system is not sufficiently controlled. An attacker could exploit this vulnerability by gaining unauthorized access to sensitive information on an affected system. A successful exploit could allow the attacker to create forged authentication requests and gain unauthorized access to the web UI of an affected system.

In PEPPERL+FUCHS WirelessHART-Gateway <= 3.0.9 a form contains a password field with autocomplete enabled. The stored credentials can be captured by an attacker who gains control over the user's computer. Therefore the user must have logged in at least once.

The collection remote for pulp_ansible stores tokens in plaintext instead of using pulp's encrypted field and exposes them in read/write mode via the API () instead of marking it as write only.

A vulnerability has been identified in SCALANCE X-200 switch family (incl. SIPLUS NET variants) (All Versions < V5.2.4), SCALANCE X-200IRT switch family (incl. SIPLUS NET variants) (All versions < V5.5.0), SCALANCE X-300 switch family (incl. X408 and SIPLUS NET variants) (All versions < V4.1.3), SCALANCE X-414-3E (All versions). The affected devices store passwords in a recoverable format. An attacker may extract and recover device passwords from the device configuration. Successful exploitation requires access to a device configuration backup and impacts confidentiality of the stored passwords.

A flaw was found in the GNOME Control Center in Red Hat Enterprise Linux 8 versions prior to 8.2, where it improperly uses Red Hat Customer Portal credentials when a user registers a system through the GNOME Settings User Interface. This flaw allows a local attacker to discover the Red Hat Customer Portal password. The highest threat from this vulnerability is to confidentiality.

IBM API Connect V10.0.5.3 and V10.0.6.0 stores user credentials in browser cache which can be read by a local user. IBM X-Force ID: 271912.

IBM UrbanCode Deploy (UCD) 7.0.4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 171250.

Tauri is a framework for building binaries for all major desktop platforms. This advisory is not describing a vulnerability in the Tauri code base itself but a commonly used misconfiguration which could lead to leaking of the private key and updater key password into bundled Tauri applications using the Vite frontend in a specific configuration. The Tauri documentation used an insecure example configuration in the `Vite guide` to showcase how to use Tauri together with Vite. Copying the following snippet `envPrefix: ['VITE_', 'TAURI_'],` from this guide into the `vite.config.ts` of a Tauri project leads to bundling the `TAURI_PRIVATE_KEY` and `TAURI_KEY_PASSWORD` into the Vite frontend code and therefore leaking this value to the released Tauri application. Using the `envPrefix: ['VITE_'],` or any other framework than Vite means you are not impacted by this advisory. Users are advised to rotate their updater private key if they are affected by this (requires Tauri CLI >=1.5.5). After updating the envPrefix configuration, generate a new private key with `tauri signer generate`, saving the new private key and updating the updater's `pubkey` value on `tauri.conf.json` with the new public key. To update your existing application, the next application build must be signed with the older private key in order to be accepted by the existing application.

MySQL-GUI-tools (mysql-administrator) leaks passwords into process list after with launch of mysql text console

IBM Watson Studio Local 1.2.3 stores key files in the user's home directory which could be obtained by another local user. IBM X-Force ID: 161413.

Dell DM5500 5.14.0.0, contain a Plain-text Password Storage Vulnerability in the appliance. A local attacker with privileges could potentially exploit this vulnerability, leading to the disclosure of certain service credentials. The attacker may be able to use the exposed credentials to access the vulnerable application with privileges of the compromised account.

IBM Security Guardium Big Data Intelligence (SonarG) 4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 160987.

IBM MQ Advanced Cloud Pak (IBM Cloud Private 1.0.0 through 3.0.1) stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 159465.

In Versa Director, Versa Analytics and VOS, Passwords are not hashed using an adaptive cryptographic hash function or key derivation function prior to storage. Popular hashing algorithms based on the Merkle-Damgardconstruction (such as MD5 and SHA-1) alone are insufficient in thwarting password cracking. Attackers can generate and use precomputed hashes for all possible password character combinations (commonly referred to as "rainbow tables") relatively quickly. The use of adaptive hashing algorithms such asscryptorbcryptor Key-Derivation Functions (i.e.PBKDF2) to hash passwords make generation of such rainbow tables computationally infeasible.

An attacker with physical access to the host can extract the secrets from the registry and create valid JWT tokens for the Fresenius Kabi Vigilant MasterMed version 2.0.1.3 application and impersonate arbitrary users. An attacker could manipulate RabbitMQ queues and messages by impersonating users.

A RootCA vulnerability found in Trend Micro Password Manager for Windows and macOS exists where the localhost.key of RootCA.crt might be improperly accessed by an unauthorized party and could be used to create malicious self-signed SSL certificates, allowing an attacker to misdirect a user to phishing sites.

An issue was discovered in PRTG 7.x through 19.4.53. Due to insufficient access control on local registry keys for the Core Server Service, a non-administrative user on the local machine is able to access administrative credentials.

The backup function in ABB Telephone Gateway TG/S 3.2 and Busch-Jaeger 6186/11 Telefon-Gateway saves the current settings and configuration of the application, including credentials of existing user accounts and other configuration's credentials in plaintext.

An issue was discovered in Idelji Web ViewPoint H01ABO-H01BY and L01ABP-L01ABZ, Web ViewPoint Plus H01AAG-H01AAQ and L01AAH-L01AAR, and Web ViewPoint Enterprise H01-H01AAE and L01-L01AAF. By reading ADB or AADB file content within the Installation subvolume, a Guardian user can discover the password of the group.user or alias who acknowledges events from the WVP Events screen.

Insufficiently Protected Credentials vulnerability exists in EcoStruxure Control Expert (all versions prior to V15.0 SP1, including all versions of Unity Pro), EcoStruxure Process Expert (all versions, including all versions of EcoStruxure Hybrid DCS), and SCADAPack RemoteConnect for x70, all versions, that could cause a leak of SMTP credential used for mailbox authentication when an attacker can access a project file.

Jenkins Weibo Plugin 1.0.1 and earlier stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

An issue was discovered in the C AMQP client library (aka rabbitmq-c) through 0.13.0 for RabbitMQ. Credentials can only be entered on the command line (e.g., for amqp-publish or amqp-consume) and are thus visible to local attackers by listing a process and its arguments.

Jenkins TraceTronic ECU-TEST Plugin 2.23.1 and earlier stores credentials unencrypted in its global configuration file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

Jenkins Spira Importer Plugin 3.2.2 and earlier stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

AdRem NetCrunch 10.6.0.4587 has Improper Credential Storage since the internal user database is readable by low-privileged users and passwords in the database are weakly encoded or encrypted.

Insufficiently protected credentials in Azure Local Cluster allows an authorized attacker to disclose information locally.