Combodo iTop is an open source, web based IT Service Management tool. In versions prior to 2.7.4, there is a command injection vulnerability in the Setup Wizard when providing Graphviz executable path. The vulnerability is patched in version 2.7.4 and 3.0.0.

An issue found in D-Link DSL-3782 v.1.03 and before allows remote authenticated users to execute arbitrary code as root via the Router IP Address fields of the network settings page.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered in Softing uaGate (SI, MB, 840D) firmware through 1.71.00.1225. A CGI script is vulnerable to command injection via a maliciously crafted form parameter.

TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds ACL rules after authentication, and the rule name parameter has injection points.

An issue in Netgate pfSense v.2.7.0 allows a remote attacker to execute arbitrary code via a crafted request to the interfaces_gif_edit.php and interfaces_gre_edit.php components.

A vulnerability was found in D-Link DIR‑818L up to 1.05B01. This issue affects the function getenv of the file /htdocs/cgibin of the component ssdpcgi. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds NAPT rules after authentication, and the rule name has an injection point.

A command injection vulnerability exists in EdgeSwitch firmware <v1.9.0 that allowed an authenticated read-only user to execute arbitrary shell commands over the HTTP interface, allowing them to escalate privileges.

FusionCompute 8.0.0 have a command injection vulnerability. The software does not sufficiently validate certain parameters post from user, successful exploit could allow an authenticated attacker to launch a command injection attack.

We have recently released new version of UniFi Protect firmware v1.13.3 and v1.14.10 for Unifi Cloud Key Gen2 Plus and UniFi Dream Machine Pro/UNVR respectively that fixes vulnerabilities found on Protect firmware v1.13.2, v1.14.9 and prior according to the description below:View only users can run certain custom commands which allows them to assign themselves unauthorized roles and escalate their privileges.

ZPE Systems, Inc Nodegrid OS v5.0.0 to v5.0.17, v5.2.0 to v5.2.19, v5.4.0 to v5.4.16, v5.6.0 to v5.6.13, v5.8.0 to v5.8.10, and v5.10.0 to v5.10.3 was discovered to contain a command injection vulnerability via the endpoint /v1/system/toolkit/files/.

Command injection vulnerability in the homemng.htm endpoint in Juplink RX4-1500 Wifi router firmware versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows authenticated remote attackers to execute commands as root via specially crafted HTTP requests to the vulnerable endpoint.

Command injection in homemng.htm in Juplink RX4-1500 versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows remote authenticated attackers to execute commands via specially crafted requests to the vulnerable endpoint.

An OS command injection vulnerability exists in the httpd wlscan_ASP functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A vulnerability classified as critical was found in Tenda O3V2 1.0.0.12(3880). This vulnerability affects the function fromNetToolGet of the file /goform/setPingInfo of the component httpd. The manipulation of the argument domain leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Belkin F9K1122 1.00.33. It has been classified as critical. This affects the function mp of the file /goform/mp of the component webs. The manipulation of the argument command leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in TOTOLINK N200RE 9.3.5u.6095_B20200916/9.3.5u.6139_B20201216. Affected by this issue is the function sub_41A0F8 of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in Tenda O3V2 1.0.0.12(3880). This issue affects the function fromTraceroutGet of the file /goform/getTraceroute of the component httpd. The manipulation of the argument dest leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this issue is the function formBSSetSitesurvey of the file /goform/formBSSetSitesurvey of the component webs. The manipulation of the argument wan_ipaddr/wan_netmask/wan_gateway/wl_ssid is directly passed by the attacker/so we can control the wan_ipaddr/wan_netmask/wan_gateway/wl_ssid leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in D-Link DI-7300G+ and DI-8200G 17.12.20A1/19.12.25A1. This affects an unknown part of the file msp_info.htm. The manipulation of the argument flag/cmd/iface leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this vulnerability is the function formSetWanStatic of the file /goform/formSetWanStatic of the component webs. The manipulation of the argument m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 is directly passed by the attacker/so we can control the m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in D-Link DIR-645 up to 1.05B01 and classified as critical. This issue affects the function ssdpcgi_main of the file /htdocs/cgibin of the component ssdpcgi. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DI-7300G+ 19.12.25A1. Affected by this issue is some unknown functionality of the file in proxy_client.asp. The manipulation of the argument proxy_srv/proxy_lanport/proxy_lanip/proxy_srvport leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in Netgear D6400 1.0.0.114. This affects an unknown part of the file diag.cgi. The manipulation of the argument host_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early and confirmed the existence of the vulnerability. They reacted very quickly, professional and kind. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in D-Link DI-7300G+ 19.12.25A1. Affected is an unknown function of the file wget_test.asp. The manipulation of the argument url leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in Wifi-soft UniBox Controller up to 20250506. Affected by this issue is some unknown functionality of the file /billing/test_accesscodelogin.php. The manipulation of the argument Password leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Wifi-soft UniBox Controller up to 20250506. This affects an unknown part of the file /billing/pms_check.php. The manipulation of the argument ipaddress leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Tenda CP3 11.10.00.2311090948 and classified as critical. Affected by this vulnerability is the function sub_F3C8C of the file apollo. The manipulation leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A command injection vulnerability in Avaya Session Border Controller for Enterprise could allow an authenticated, remote attacker to send specially crafted messages and execute arbitrary commands with the affected system privileges. Affected versions of Avaya Session Border Controller for Enterprise include 7.x, 8.0 through 8.1.1.x

A vulnerability classified as critical was found in Wifi-soft UniBox Controller up to 20250506. Affected by this vulnerability is an unknown functionality of the file /authentication/logout.php. The manipulation of the argument mac_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been declared as critical. Affected by this vulnerability is the function WPS of the file /goform/WPS. The manipulation of the argument PIN leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Netgear WG302v2 v5.2.9 and WAG302v2 v5.1.19 were discovered to contain multiple command injection vulnerabilities in the upgrade_handler function via the firmwareRestore and firmwareServerip parameters.

A vulnerability classified as critical has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function NTP of the file /goform/NTP. The manipulation of the argument manual_year_select/manual_month_select/manual_day_select/manual_hour_select/manual_min_select/manual_sec_select leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in D-Link DI-500WF-WT up to 20250511 and classified as critical. Affected by this vulnerability is the function sub_456DE8 of the file /msp_info.htm?flag=cmd of the component /usr/sbin/jhttpd. The manipulation of the argument cmd leads to command injection. The attack can be launched remotely.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been rated as critical. Affected by this issue is the function verifyFacebookLike of the file /goform/verifyFacebookLike. The manipulation of the argument uid/accessToken leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Cursor is a code editor built for programming with AI. In versions below 1.3, an attacker can bypass the allow list in auto-run mode with a backtick (`) or $(cmd). If a user has swapped Cursor from its default settings (requiring approval for every terminal call) to an allowlist, an attacker can execute arbitrary command execution outside of the allowlist without user approval. An attacker can trigger this vulnerability if chained with indirect prompt injection. This is fixed in version 1.3.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. Affected is the function setSystemAdmin of the file /setSystemAdmin. The manipulation of the argument AdminID leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

ScanCode.io is a server to script and automate software composition analysis with ScanPipe pipelines. Prior to version 32.5.1, the software has a possible command injection vulnerability in the docker fetch process as it allows to append malicious commands in the `docker_reference` parameter. In the function `scanpipe/pipes/fetch.py:fetch_docker_image` the parameter `docker_reference` is user controllable. The `docker_reference` variable is then passed to the vulnerable function `get_docker_image_platform`. However, the `get_docker_image_plaform` function constructs a shell command with the passed `docker_reference`. The `pipes.run_command` then executes the shell command without any prior sanitization, making the function vulnerable to command injections. A malicious user who is able to create or add inputs to a project can inject commands. Although the command injections are blind and the user will not receive direct feedback without logs, it is still possible to cause damage to the server/container. The vulnerability appears for example if a malicious user adds a semicolon after the input of `docker://;`, it would allow appending malicious commands. Version 32.5.1 contains a patch for this issue. The `docker_reference` input should be sanitized to avoid command injections and, as a workaround, one may avoid creating commands with user controlled input directly.

A vulnerability classified as critical was found in FLIR AX8 up to 1.46.16. This vulnerability affects the function setDataTime of the file \usr\www\application\models\settingsregional.php. The manipulation of the argument year/month/day/hour/minute leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

OPNsense 25.1 contains an authenticated command injection vulnerability in its Bridge Interface Edit endpoint (interfaces_bridge_edit.php). The span POST parameter is concatenated into a system-level command without proper sanitization or escaping, allowing an administrator to inject arbitrary shell operators and payloads. Successful exploitation grants RCE with the privileges of the web service (typically root), potentially leading to full system compromise or lateral movement. This vulnerability arises from inadequate input validation and improper handling of user-supplied data in backend command invocations.

GetSimple CMS is a content management system. In versions starting from 3.3.16 to 3.3.21, an authenticated user with access to the Edit component can inject arbitrary PHP into a component file and execute it via a crafted query string, resulting in Remote Code Execution (RCE). This issue is set to be patched in version 3.3.22.

A vulnerability classified as critical has been found in SevOne Network Management System up to 5.7.2.22. This affects the file traceroute.php of the Traceroute Handler. The manipulation leads to privilege escalation with a command injection. It is possible to initiate the attack remotely.

Lack of input validation/sanitization in the 'setLanCfg' API endpoint in httpd in the Tenda RX2 Pro 16.03.30.14 allows a remote attacker that is authorized to the web management portal to gain root shell access to the device by sending a crafted web request. This is persistent because the command injection is saved in the configuration of the device.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.56, R7800 before 1.0.2.68, R8900 before 1.0.4.26, and R9000 before 1.0.4.26.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBS40V before 2.6.1.4, RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with administrative privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input to the web UI. A successful exploit could allow an attacker to execute arbitrary commands with administrative privileges on an affected device.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7500v2 before 1.0.3.48, R8900 before 1.0.5.2, R9000 before 1.0.5.2, and R7800 before 1.0.2.68.

A vulnerability classified as critical was found in D-Link DIR-600L up to 2.07B01. This vulnerability affects the function wake_on_lan. The manipulation of the argument host leads to command injection. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.