The administrator is able to configure an insecure captive portal script

A vulnerability classified as critical has been found in TOTOLINK A720R 4.1.5. Affected is the function exportOvpn. The manipulation leads to os command injection. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The vendor was contacted early about this disclosure but did not respond in any way.

Command Injection in the CPE WAN Management Protocol (CWMP) registration in Amino Communications AK45x series, AK5xx series, AK65x series, Aria6xx series, Aria7/AK7Xx series and Kami7B allows man-in-the-middle attackers to execute arbitrary commands with root level privileges.

A command injection issue in TRENDnet TEW-411BRPplus v.2.07_eu that allows a local attacker to execute arbitrary code via the data1 parameter in the debug.cgi page.

baserCMS is a website development framework. Prior to version 5.0.9, there is an OS Command Injection vulnerability in the site search feature of baserCMS. Version 5.0.9 contains a fix for this vulnerability.

Pillow through 10.1.0 allows PIL.ImageMath.eval Arbitrary Code Execution via the environment parameter, a different vulnerability than CVE-2022-22817 (which was about the expression parameter).

Deno is a JavaScript, TypeScript, and WebAssembly runtime. Before 2.5.6, a prior patch aimed to block spawning Windows batch/shell files by returning an error when a spawned path’s extension matched .bat or .cmd. That check performs a case-sensitive comparison against lowercase literals and therefore can be bypassed when the extension uses alternate casing (for example .BAT, .Bat, etc.). This vulnerability is fixed in 2.5.6.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP225(V3) 5.1.0 Build 20220926 of the AC1350 Wireless MU-MIMO Gigabit Access Point.

ConnectWise ScreenConnect through 23.8.4 allows man-in-the-middle attackers to achieve remote code execution via crafted messages.

The Bit File Manager plugin for WordPress is vulnerable to Remote Code Execution in versions 6.0 to 6.5.5 via the 'checkSyntax' function. This is due to writing a temporary file to a publicly accessible directory before performing file validation. This makes it possible for unauthenticated attackers to execute code on the server if an administrator has allowed Guest User read permissions.

B&R Automation Studio Upgrade Service and B&R Technology Guarding use insufficient cryptography for communication to the upgrade and the licensing servers. A network-based attacker could exploit the vulnerability to execute arbitrary code on the products or sniff sensitive data.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal'), Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in flow computer and remote controller products of ABB ( RMC-100 (Standard), RMC-100-LITE, XIO, XFCG5 , XRCG5 , uFLOG5 , UDC) allows an attacker who successfully exploited this vulnerability could insert and run arbitrary code in an affected system node.

A vulnerability, which was classified as critical, has been found in D-Link DAR-8000-10 up to 20230819. Affected by this issue is some unknown functionality of the file /log/decodmail.php. The manipulation of the argument file leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. VDB-238574 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Catalog Importer, Scraper & Crawler plugin for WordPress is vulnerable to PHP code injection in all versions up to, and including, 5.1.4. This is due to reliance on a guessable numeric token (e.g. ?key= 900001705) without proper authentication, combined with the unsafe use of eval() on user-supplied input. This makes it possible for unauthenticated attackers to execute arbitrary PHP code on the server via a forged request granted they can guess or brute-force the numeric key.

totolink EX300_v2 V4.0.3c.140_B20210429 was discovered to contain a command injection vulnerability via the component process forceugpo.

Microsoft Internet Explorer 6, 6 SP1, 7, and 8 does not properly handle objects in memory, which allows remote attackers to execute arbitrary code by accessing an object that (1) was not properly initialized or (2) is deleted, leading to memory corruption, aka "HTML Object Memory Corruption Vulnerability."

A flaw has been found in wong2 mcp-cli 1.13.0. Affected is the function redirectToAuthorization of the file /src/oauth/provider.js of the component oAuth Handler. This manipulation causes os command injection. The attack may be initiated remotely. The attack is considered to have high complexity. The exploitability is told to be difficult. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue in OpenSourcePOS v3.4.1 allows attackers to execute arbitrary code via returning a crafted AJAX response.

A vulnerability, which was classified as critical, has been found in Comodo Internet Security Premium 12.3.4.8162. This issue affects some unknown processing of the file cis_update_x64.xml of the component Manifest File Handler. The manipulation of the argument binary/params leads to os command injection. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Roo Code is an AI-powered autonomous coding agent that lives in users' editors. Prior to version 3.26.7, Due to an error in validation it was possible for Roo to automatically execute commands that did not match the allow list prefixes. This issue has been patched in version 3.26.7.

A Shell Metacharacter Injection vulnerability in result.php in DRK Odenwaldkreis Testerfassung March-2021 allow an attacker with a valid token of a COVID-19 test result to execute shell commands with the permissions of the web server.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP115(V4) 5.0.4 Build 20220216 of the N300 Wireless Gigabit Access Point.

Google-it is a Node.js package which allows its users to send search queries to Google and receive the results in a JSON format. When using the 'Open in browser' option in versions up to 1.6.2, google-it will unsafely concat the result's link retrieved from google to a shell command, potentially exposing the server to RCE.

Microsoft Internet Explorer 5.01 SP4, 6, 6 SP1, 7, and 8 does not properly handle argument validation for unspecified variables, which allows remote attackers to execute arbitrary code via a crafted HTML document, aka "HTML Component Handling Vulnerability."

fail2ban is a daemon to ban hosts that cause multiple authentication errors. In versions 0.9.7 and prior, 0.10.0 through 0.10.6, and 0.11.0 through 0.11.2, there is a vulnerability that leads to possible remote code execution in the mailing action mail-whois. Command `mail` from mailutils package used in mail actions like `mail-whois` can execute command if unescaped sequences (`\n~`) are available in "foreign" input (for instance in whois output). To exploit the vulnerability, an attacker would need to insert malicious characters into the response sent by the whois server, either via a MITM attack or by taking over a whois server. The issue is patched in versions 0.10.7 and 0.11.3. As a workaround, one may avoid the usage of action `mail-whois` or patch the vulnerability manually.

Proxyee-Down is open source proxy software. An attacker being able to provide an extension script (eg: through a MiTM attack or by hosting a malicious extension) may be able to run arbitrary commands on the system running Proxyee-Down. For more details including a PoC see the referenced GHSL-2021-053. As of the writing of this CVE there is currently no patched version.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS management interface exists when performing dynamic updates. This vulnerability enables a man-in-the-middle attacker to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20-h1; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h3; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h2; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. Prisma Access customers that have Prisma Access 2.1 Preferred or Prisma Access 2.1 Innovation firewalls are impacted by this issue.

An OS command injection vulnerability in the Simple Certificate Enrollment Protocol (SCEP) feature of PAN-OS software allows an unauthenticated network-based attacker with specific knowledge of the firewall configuration to execute arbitrary code with root user privileges. The attacker must have network access to the GlobalProtect interfaces to exploit this issue. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20-h1; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h3; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h2; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. Prisma Access customers with Prisma Access 2.1 Preferred and Prisma Access 2.1 Innovation firewalls are impacted by this issue.

A command injection vulnerability has been reported to affect QNAP NAS running legacy versions of QTS. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. This issue affects: QNAP Systems Inc. QTS versions prior to 4.3.6.1663 Build 20210504; versions prior to 4.3.3.1624 Build 20210416. This issue does not affect: QNAP Systems Inc. QTS 4.5.3. QNAP Systems Inc. QuTS hero h4.5.3. QNAP Systems Inc. QuTScloud c4.5.5.

Roo Code is an AI-powered autonomous coding agent that lives in users' editors. Versions 3.25.23 and below contain a vulnerability where certain VS Code workspace configuration files (.code-workspace) are not protected in the same way as the .vscode folder. If the agent was configured to auto-approve file writes, an attacker able to influence prompts (for example via prompt injection) could cause malicious workspace settings or tasks to be written. These tasks could then be executed automatically when the workspace is reopened, resulting in arbitrary code execution. This issue is fixed in version 3.26.0.

yt-dlp is a feature-rich command-line audio/video downloader. In versions 2025.06.25 and below, when the --exec option is used on Windows with the default placeholder (or {}), insufficient sanitization is applied to the expanded filepath, allowing for remote code execution. This is a bypass of the mitigation for CVE-2024-22423 where the default placeholder and {} were not covered by the new escaping rules. Windows users who are unable to upgrade should avoid using --exec altogether. Instead, the --write-info-json or --dump-json options could be used, with an external script or command line consuming the JSON output. This is fixed in version 2025.07.21.

Improper Control of Generation of Code ('Code Injection') vulnerability in emarket-design YouTube Showcase allows Object Injection. This issue affects YouTube Showcase: from n/a through 3.5.1.

Use-after-free vulnerability in mstime.dll in Microsoft Internet Explorer 8 allows remote attackers to execute arbitrary code via vectors related to the TIME2 behavior, the CTimeAction object, and destruction of markup, leading to memory corruption, aka "HTML Object Memory Corruption Vulnerability."

1Panel is a web interface and MCP Server that manages websites, files, containers, databases, and LLMs on a Linux server. In versions 2.0.5 and below, the HTTPS protocol used for communication between the Core and Agent endpoints has incomplete certificate verification during certificate validation, leading to unauthorized interface access. Due to the presence of numerous command execution or high-privilege interfaces in 1Panel, this results in Remote Code Execution (RCE). This is fixed in version 2.0.6. The CVE has been translated from Simplified Chinese using GitHub Copilot.

Roo Code is an AI-powered autonomous coding agent. The project-specific MCP configuration for the Roo Code agent is stored in the `.roo/mcp.json` file within the VS Code workspace. Because the MCP configuration format allows for execution of arbitrary commands, prior to version 3.20.3, it would have been possible for an attacker with access to craft a prompt to ask the agent to write a malicious command to the MCP configuration file. If the user had opted-in to auto-approving file writes within the project, this would have led to arbitrary command execution. This issue is of moderate severity, since it requires the attacker to already be able to submit prompts to the agent (for instance through a prompt injection attack), for the user to have MCP enabled (on by default), and for the user to have enabled auto-approved file writes (off by default). Version 3.20.3 fixes the issue by adding an additional layer of opt-in configuration for auto-approving writing to Roo's configuration files, including all files within the `.roo/` folder.

Successful exploitation of the vulnerability could allow an attacker to execute arbitrary commands as root, potentially leading to the loss of confidentiality, integrity, availability, and full control of the access point.

An issue was discovered in Pulse Secure Pulse Connect Secure (PCS) through 2020-04-06. The applet in tncc.jar, executed on macOS, Linux, and Solaris clients when a Host Checker policy is enforced, allows a man-in-the-middle attacker to perform OS command injection attacks (against a client) via shell metacharacters to the doCustomRemediateInstructions method, because Runtime.getRuntime().exec() is used.

An issue was discovered on FIRSTNUM JC21A-04 devices through 2.01ME/FN that allows authenticated attackers to execute arbitrary OS system commands with root privileges via crafted payloads to the xml_action.cgi?method= endpoint.

Jointelli 5G CPE 21H01 firmware JY_21H01_A3_v1.36 devices allow (blind) OS command injection. Multiple endpoints are vulnerable, including /ubus/?flag=set_WPS_pin and /ubus/?flag=netAppStar1 and /ubus/?flag=set_wifi_cfgs. This allows an authenticated attacker to execute arbitrary OS commands with root privileges via crafted inputs to the SSID, WPS, Traceroute, and Ping fields.

GNU Mailman 2.1.39, as bundled in cPanel (and WHM), in certain external archiver configurations, allows unauthenticated attackers to execute arbitrary OS commands via shell metacharacters in an email Subject line. NOTE: multiple third parties report that they are unable to reproduce this, regardless of whether cPanel or WHM is used.

OS command injection vulnerability exists in WPS Office version 10.8.0.6186. If a remote attacker who can conduct a man-in-the-middle attack connects the product to a malicious server and sends a specially crafted data, an arbitrary OS command may be executed on the system where the product is installed.

A vulnerability was found in inclusionAI AWorld up to 8c257626e648d98d793dd9a1a950c2af4dd84c4e. It has been rated as critical. This issue affects the function subprocess.run/subprocess.Popen of the file AWorld/aworld/virtual_environments/terminals/shell_tool.py. The manipulation leads to os command injection. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable.

A CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that could allow a user that knows the credentials to execute unprivileged shell commands on the appliance over SSH. Affected products: StruxureWare Data Center Expert (V7.9.2 and prior)

IBM WebSphere Application Server 8.5 and 9.0 traditional could allow a remote attacker to execute arbitrary code on the system with a specially crafted sequence of serialized objects. IBM X-Force ID: 245513.

Netdata is an open source option for real-time infrastructure monitoring and troubleshooting. An attacker with the ability to establish a streaming connection can execute arbitrary commands on the targeted Netdata agent. When an alert is triggered, the function `health_alarm_execute` is called. This function performs different checks and then enqueues a command by calling `spawn_enq_cmd`. This command is populated with several arguments that are not sanitized. One of them is the `registry_hostname` of the node for which the alert is raised. By providing a specially crafted `registry_hostname` as part of the health data that is streamed to a Netdata (parent) agent, an attacker can execute arbitrary commands at the remote host as a side-effect of the raised alert. Note that the commands are executed as the user running the Netdata Agent. This user is usually named `netdata`. The ability to run arbitrary commands may allow an attacker to escalate privileges by escalating other vulnerabilities in the system, as that user. The problem has been fixed in: Netdata agent v1.37 (stable) and Netdata agent v1.36.0-409 (nightly). As a workaround, streaming is not enabled by default. If you have previously enabled this, it can be disabled. Limiting access to the port on the recipient Agent to trusted child connections may mitigate the impact of this vulnerability.

An os command injection vulnerability exists in the liburvpn.so create_private_key functionality of Milesight VPN v2.0.2. A specially-crafted network request can lead to command execution. An attacker can send a malicious packet to trigger this vulnerability.

A vulnerability in the Cisco Adaptive Security Device Manager (ASDM) Launcher could allow an unauthenticated, remote attacker to execute arbitrary code on a user's operating system. This vulnerability is due to a lack of proper signature verification for specific code exchanged between the ASDM and the Launcher. An attacker could exploit this vulnerability by leveraging a man-in-the-middle position on the network to intercept the traffic between the Launcher and the ASDM and then inject arbitrary code. A successful exploit could allow the attacker to execute arbitrary code on the user's operating system with the level of privileges assigned to the ASDM Launcher. A successful exploit may require the attacker to perform a social engineering attack to persuade the user to initiate communication from the Launcher to the ASDM.

Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are Prior to 6.1.42 and prior to 7.0.6. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle VM VirtualBox. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H).

Command injection when ingesting a remote Kaggle dataset due to a lack of input sanitization in the ingest_kaggle() API

The Vanna library uses a prompt function to present the user with visualized results, it is possible to alter the prompt using prompt injection and run arbitrary Python code instead of the intended visualization code. Specifically - allowing external input to the library’s “ask” method with "visualize" set to True (default behavior) leads to remote code execution.