NETGEAR RAX30 libcms_cli Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the libcms_cli module. The issue results from the lack of proper validation of a user-supplied command before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19838.

Softnext Mail SQR Expert is an email management platform, it has insufficient filtering for a special character within a spcific function. A remote attacker authenticated as a localhost can exploit this vulnerability to perform command injection attacks, to execute arbitrary system command, manipulate system or disrupt service.

A vulnerability was found in Tecno 4G Portable WiFi TR118 TR118-M30E-RR-D-EnFrArSwHaPo-OP-V008-20220830. It has been declared as critical. This vulnerability affects unknown code of the file /goform/goform_get_cmd_process of the component Ping Tool. The manipulation of the argument url leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-246130 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Brivo ACS100, ACS300 allows OS Command Injection, Bypassing Physical Security.This issue affects ACS100 (Network Adjacent Access), ACS300 (Physical Access): from 5.2.4 before 6.2.4.3.

Command injection vulnerability in Comtrend router WLD71-T1_v2.0.201820, affecting the GRG-4280us version. This vulnerability could allow an authenticated user to execute commands inside the router by making a POST request to the URL “/boaform/admin/formUserTracert”.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

An issue in TPLINK TL-WPA 8630 TL-WPA8630(US)_V2_2.0.4 Build 20230427 allows a remote attacker to execute arbitrary code via function sub_4256CC, which allows command injection by injecting 'devpwd'.

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `commandTable.`

D-Link DIR-X3260 SetSysEmailSettings AccountName Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within prog.cgi, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21159.

An OS command injection vulnerability was discovered in D-Link DSL-3782 v1.01 via the public_type parameter. This vulnerability allows attackers to execute arbitrary operating system (OS) commands via a crafted packet.

An OS command injection vulnerability has been found to affect legacy QNAP VioStor NVR models running QVR Firmware 4.x. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following versions: QVR Firmware 5.0.0 and later

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the restore function.

The web application allows user input to pass unfiltered to a command executed on the underlying operating system. The vulnerable component is bound to the network stack and the set of possible attackers extends up to and including the entire Internet. An attacker with low privileged access to the application has the potential to execute commands on the operating system under the context of the webserver.

OS command injection vulnerability in WRC-X3000GS2-W v1.05 and earlier, WRC-X3000GS2-B v1.05 and earlier, and WRC-X3000GS2A-B v1.05 and earlier allows a network-adjacent authenticated user to execute an arbitrary OS command by sending a specially crafted request.

OS command injection vulnerability in Buffalo network devices allows an network-adjacent attacker to execute an arbitrary OS command if a specially crafted request is sent to the management page.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR841N TL-WR841N(US)_V14_220121 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the ated_tp service. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-17356.

D-Link DIR_882_FW130B06 and DIR_878 DIR_878_FW130B08 were discovered to contain multiple command injection vulnerabilities via the ExternalPort, InternalPort, ProtocolNumber, and LocalIPAddress parameters in the SetVirtualServerSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted POST request.

An authorized RCE vulnerability exists in the DrayTek Vigor2960 router version 1.4.4, where an attacker can place a malicious command into the table parameter of the doPPPoE function in the cgi-bin/mainfunction.cgi route, and finally the command is executed by the system function.

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `setSWMOption.`

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `download_ovpn.`

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `doOpenVPN.`

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the name parameter in the run_command function.

A Command Injection vulnerability exists in the do_upgrade_post function of the httpd binary in Linksys E1500 v1.0.06.001. As a result, an authenticated attacker can execute OS commands with root privileges.

An OS command injection vulnerability was discovered in D-Link DSL-3782 v1.01 via the inIP, insPort, inePort, exsPort, exePort, and protocol parameters. This vulnerability allows attackers to execute arbitrary operating system (OS) commands via a crafted packet.

D-Link DIR-2150 SetTriggerPPPoEValidate Username Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2150 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the SOAP API interface, which listens on TCP port 80 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20554.

Command Injection vulnerability in TP-Link WA850RE (httpd modules) allows authenticated adjacent attacker to inject arbitrary commands.This issue affects: ≤ WA850RE V2_160527, ≤ WA850RE V3_160922.

A command injection vulnerability in the CGI program of Zyxel VMG3312-T20A firmware version 5.30(ABFX.5)C0 could allow a local authenticated attacker to execute arbitrary OS commands on a vulnerable device via a LAN interface.

A vulnerability was found in WAVLINK WN535K2 and WN535K3 and classified as critical. This issue affects some unknown processing of the file /cgi-bin/touchlist_sync.cgi. The manipulation of the argument IP leads to os command injection. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in WAVLINK WN535K2 and WN535K3 and classified as critical. This vulnerability affects unknown code of the file /cgi-bin/nightled.cgi. The manipulation of the argument start_hour leads to os command injection. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in WAVLINK WN535K2 and WN535K3. This affects an unknown part of the file /cgi-bin/mesh.cgi?page=upgrade. The manipulation of the argument key leads to os command injection. The exploit has been disclosed to the public and may be used.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

An OS command injection vulnerability was discovered in D-Link DSL-3782 v1.01 via the samba_wg and samba_nbn parameters. This vulnerability allows attackers to execute arbitrary operating system (OS) commands via a crafted packet.

D-Link DIR-2150 GetFirmwareStatus Target Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2150 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the SOAP API interface, which listens on TCP port 80 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20561.

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the value parameter in the filter_string function.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the name or email field provided to libreadycloud.so. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15874.