A vulnerability was found in Totolink LR1200GB 9.1.0u.6619_B20230130. It has been rated as critical. This issue affects the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249857 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in SevOne Network Management System up to 5.7.2.22. This affects the file traceroute.php of the Traceroute Handler. The manipulation leads to privilege escalation with a command injection. It is possible to initiate the attack remotely.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with administrative privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input to the web UI. A successful exploit could allow an attacker to execute arbitrary commands with administrative privileges on an affected device.

Nginx-ui is online statistics for Server Indicators​​ Monitor CPU usage, memory usage, load average, and disk usage in real-time. The `Home > Preference` page exposes a small list of nginx settings such as `Nginx Access Log Path` and `Nginx Error Log Path`. However, the API also exposes `test_config_cmd`, `reload_cmd` and `restart_cmd`. While the UI doesn't allow users to modify any of these settings, it is possible to do so by sending a request to the API. This issue may lead to authenticated Remote Code Execution, Privilege Escalation, and Information Disclosure. This issue has been patched in version 2.0.0.beta.9.

Lack of input validation/sanitization in the 'setLanCfg' API endpoint in httpd in the Tenda RX2 Pro 16.03.30.14 allows a remote attacker that is authorized to the web management portal to gain root shell access to the device by sending a crafted web request. This is persistent because the command injection is saved in the configuration of the device.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been rated as critical. Affected by this issue is the function sub_435E04. The manipulation of the argument host leads to command injection. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

The Akuvox E11 web server backend library allows command injection in the device phone-book contacts functionality. This could allow an attacker to upload files with executable command instructions.

A vulnerability classified as critical was found in D-Link DIR-600L up to 2.07B01. This vulnerability affects the function wake_on_lan. The manipulation of the argument host leads to command injection. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in TOTOLINK N150RT 3.4.0-B20190525. It has been rated as critical. This issue affects some unknown processing of the file /boafrm/formWsc. The manipulation of the argument localPin leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

This command injection vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions of QTS and QuTS hero.

A vulnerability in the CronJob scheduler API of Cisco Digital Network Architecture (DNA) Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to incorrect input validation of user-supplied data. An attacker could exploit this vulnerability by sending a malicious packet. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Cisco Bug IDs: CSCvi42263.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user.

An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. cgi-bin/ddns_enc.cgi allows authenticated command injection.

The API endpoints in Ironman PowerShell Universal 3.0.0 through 4.2.0 allow remote attackers to execute arbitrary commands via crafted HTTP requests if a param block is used, due to invalid sanitization of input strings. The fixed versions are 3.10.2, 4.1.10, and 4.2.1.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

Command Injection in Jfinal CMS v4.7.1 and earlier allows remote attackers to execute arbitrary code by uploading a malicious HTML template file via the component 'jfinal_cms/admin/filemanager/list'.

An improper neutralization of special elements used in a command ('Command Injection') vulnerability [CWE-77] in FortiPortal version 7.2.0, version 7.0.6 and below may allow a remote authenticated attacker with at least R/W permission to execute unauthorized commands via specifically crafted arguments in the Schedule System Backup page field.

Mingyu Security Gateway before v3.0-5.3p was discovered to contain a remote command execution (RCE) vulnerability via the log_type parameter at /log/fw_security.mds.

An issue was discovered in Relyum RELY-PCIe 22.2.1 and RELY-REC 23.1.0 devices, allowing authenticated command injection through the web interface.

includes/configure_client.php in RaspAP 2.6.6 allows attackers to execute commands via command injection.

An OS command injection vulnerability has been reported to affect Photo Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Photo Station 6.4.2 ( 2023/12/15 ) and later

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

China Mobile An Lianbao WF-1 V1.0.1 router provides a web interface /api/ZRMesh/set_ZRMesh which receives parameters by POST request, and the parameter mesh_enable and mesh_device have a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.

The Symantec Messaging Gateway before 10.6.3-267 can encounter an issue of remote code execution, which describes a situation whereby an individual may obtain the ability to execute commands remotely on a target machine or in a target process. In this type of occurrence, after gaining access to the system, the attacker may attempt to elevate their privileges.

Atos Unify OpenScape 4000 Platform V10 R1 before Hotfix V10 R1.42.2 4000 and Manager Platform V10 R1 before Hotfix V10 R1.42.2 allow command injection by an authenticated attacker into the platform operating system, leading to administrative access, via dtb pages of the platform portal. This is also known as OSFOURK-23719.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

In IBOS 4.5.4 Open, the database backup has Command Injection Vulnerability.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.1, 4000 Assistant V10 R0, 4000 Manager V10 R1 before V10 R1.42.1, and 4000 Manager V10 R0 allow Authenticated Command Injection via AShbr. This is also known as OSFOURK-24039.

An issue in ZenTao Community Edition v.18.6 and before, ZenTao Biz v.8.6 and before, ZenTao Max v.4.7 and before allows an attacker to execute arbitrary code via a crafted script to the Office Conversion Settings function.

Atos Unify OpenScape 4000 Platform V10 R1 before Hotfix V10 R1.42.2 and 4000 and Manager Platform V10 R1 before Hotfix V10 R1.42.2 allow command injection by an authenticated attacker into the platform operating system, leading to administrative access via the webservice. This is also known as OSFOURK-24120.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds ACL rules after authentication, and the rule name parameter has injection points.

A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution.

The ping_from parameter of ping_tracerte.cgi in the web UI of Telstra Smart Modem Gen 2 (Arcadyan LH1000), firmware versions < 0.18.15r, was not properly sanitized before being used in a system call, which could allow an authenticated attacker to achieve command injection as root on the device. 

ZPE Systems, Inc Nodegrid OS v5.0.0 to v5.0.17, v5.2.0 to v5.2.19, v5.4.0 to v5.4.16, v5.6.0 to v5.6.13, v5.8.0 to v5.8.10, and v5.10.0 to v5.10.3 was discovered to contain a command injection vulnerability via the endpoint /v1/system/toolkit/files/.

A remote code execution vulnerability was identified in GitHub Enterprise Server that could be exploited when building a GitHub Pages site. User-controlled configuration of the underlying parsers used by GitHub Pages were not sufficiently restricted and made it possible to execute commands on the GitHub Enterprise Server instance. To exploit this vulnerability, an attacker would need permission to create and build a GitHub Pages site on the GitHub Enterprise Server instance. This vulnerability affected all versions of GitHub Enterprise Server prior to 2.22 and was fixed in 2.21.6, 2.20.15, and 2.19.21. The underlying issues contributing to this vulnerability were identified both internally and through the GitHub Security Bug Bounty program.

A command injection on the /admin/broadcast.php script of Invigo Automatic Device Management (ADM) through 5.0 allows remote authenticated attackers to execute arbitrary PHP code on the server as the user running the application.

Command injection in homemng.htm in Juplink RX4-1500 versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows remote authenticated attackers to execute commands via specially crafted requests to the vulnerable endpoint.

Mattermost versions 10.4.x <= 10.4.2, 10.3.x <= 10.3.3, 9.11.x <= 9.11.8 fail to restrict command execution in archived channels, which allows authenticated users to run commands in archived channels.

PhoneSystem Terminal in 3CX Phone System (Debian based installation) 16.0.0.1570 allows an authenticated attacker to run arbitrary commands with the phonesystem user privileges because of "<space><space> followed by <shift><enter>" mishandling.

Command injection vulnerability in the homemng.htm endpoint in Juplink RX4-1500 Wifi router firmware versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows authenticated remote attackers to execute commands as root via specially crafted HTTP requests to the vulnerable endpoint.

An issue was discovered in Atos Unify OpenScape Voice Trace Manager V8 before V8 R0.9.11. It allows authenticated command injection via ftp.

In Splunk Enterprise versions below 8.2.12, 9.0.6, and 9.1.1, an attacker can create an external lookup that calls a legacy internal function. The attacker can use this internal function to insert code into the Splunk platform installation directory. From there, a user can execute arbitrary code on the Splunk platform Instance.

A code injection vulnerability exists in the Ambari Alert Definition feature, allowing authenticated users to inject and execute arbitrary shell commands. The vulnerability arises when defining alert scripts, where the script filename field is executed using `sh -c`. An attacker with authenticated access can exploit this vulnerability to inject malicious commands, leading to remote code execution on the server. The issue has been fixed in the latest versions of Ambari.

An issue in NETIS SYSTEMS WF2409E v.3.6.42541 allows a remote attacker to execute arbitrary code via the ping and traceroute functions of the diagnostic tools component in the admin management interface.

A command injection vulnerability in RG-EW series home routers and repeaters v.EW_3.0(1)B11P219, RG-NBS and RG-S1930 series switches v.SWITCH_3.0(1)B11P219, RG-EG series business VPN routers v.EG_3.0(1)B11P219, EAP and RAP series wireless access points v.AP_3.0(1)B11P219, and NBC series wireless controllers v.AC_3.0(1)B11P219 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /cgi-bin/luci/api/cmd via the remoteIp field.

CasaOS is an open-source personal cloud system. Prior to version 0.4.4, if an authenticated user using CasaOS is able to successfully connect to a controlled SMB server, they are able to execute arbitrary commands. Version 0.4.4 contains a patch for the issue.

Azure Identity SDK Remote Code Execution Vulnerability