TOTOLINK A860R V4.1.2cu.5182_B20201027 is vulnerable to Buffer Overflow via Cstecgi.cgi.
Tenda AX1806 v1.0.0.1 contains a stack overflow via the iptv.city.vlan parameter in the function setIptvInfo.
The ACENet service in Sierra Wireless ALEOS before 4.4.9, 4.5.x through 4.9.x before 4.9.5, and 4.10.x through 4.13.x before 4.14.0 allows remote attackers to execute arbitrary code via a buffer overflow.
IQ Engine before 10.6r2 on Extreme Network AP devices has a Buffer Overflow.
In Tenda G3 US_G3V3.0br_V15.11.0.6(7663)_EN_TDE, in httpd binary, the addDhcpRule function has a buffer overflow caused by sscanf.
There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.
An issue was discovered on Samsung mobile devices with software through 2017-11-03 (S.LSI modem chipsets). The Exynos modem chipset has a baseband buffer overflow. The Samsung ID is SVE-2017-10745 (January 2018).
A buffer overflow in Counter-Strike through 8684 allows a game server to execute arbitrary code on a remote client's machine by modifying the lservercfgfile console variable.
IQ Engine before 10.6r1 on Extreme Network AP devices has a Buffer Overflow in the implementation of the CAPWAP protocol that may be exploited to obtain elevated privileges to conduct remote code execution. Access to the internal management interface/subnet is required to conduct the exploit.
An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) a resource certificate containing a Key Usage extension composed of more than two bytes of data. Fort writes this string into a 2-byte buffer without properly sanitizing its length, leading to a buffer overflow.
Buffer overflow can occur in WLAN firmware while parsing beacon/probe_response frames during roaming in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking in APQ8096, APQ8096AU, IPQ6018, IPQ8074, MDM9607, MDM9640, MDM9650, MSM8996AU, Nicobar, QCA6174A, QCA6574, QCA6574AU, QCA6584, QCA6584AU, QCA8081, QCA9377, QCA9379, QCS404, QCS605, Rennell, SA6155P, SC8180X, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130
In PHP versions 7.1.x below 7.1.33, 7.2.x below 7.2.24 and 7.3.x below 7.3.11 in certain configurations of FPM setup it is possible to cause FPM module to write past allocated buffers into the space reserved for FCGI protocol data, thus opening the possibility of remote code execution.
Incorrect reading of system image resulting in buffer overflow when size of system image is increased in Snapdragon Auto, Snapdragon Mobile, Snapdragon Wearables in MDM9607, MSM8909W, Qualcomm 215, SD 210/SD 212/SD 205, SD 425, SD 439 / SD 429, SD 450, SD 625, SD 632, SDM439
Possible buffer overflow issue due to lack of length check when parsing the extended cap IE header length in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in IPQ8074, MDM9206, MDM9607, MDM9640, MDM9650, MSM8996AU, QCA6174A, QCA6574, QCA6574AU, QCA6584, QCA8081, QCA9379, QCS404, QCS405, QCS605, Qualcomm 215, SD 210/SD 212/SD 205, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 625, SD 632, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820, SD 820A, SD 835, SD 845 / SD 850, SD 855, SD 8CX, SDA660, SDM439, SDM630, SDM660, SDX20, SDX24, SXR1130
Tenda AC6 v2.0 v15.03.06.50 was discovered to contain a buffer overflow in the function 'fromSetSysTime.
Buffer Overflow vulnerability in NETGEAR R6400v2 before version 1.0.4.118, allows remote unauthenticated attackers to execute arbitrary code via crafted URL to httpd.
Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects GS105Ev2 before 1.6.0.4, GS105PE before 1.6.0.4, GS408EPP before 1.0.0.15, GS808E before 1.7.0.7, GS908E before 1.7.0.3, GSS108E before 1.6.0.4, and GSS108EPP before 1.0.0.15.
An issue was discovered on Samsung mobile devices with P(9.0) (with TEEGRIS) software. There is a buffer overflow in the BIOSUB Trustlet. The Samsung ID is SVE-2019-15264 (October 2019).
Buffer Overflow vulnerability in JerryScript version 3.0, allows remote attackers to execute arbitrary code via ecma_stringbuilder_append_raw component at /jerry-core/ecma/base/ecma-helpers-string.c.
An issue was discovered on LG mobile devices with Android OS 7.0, 7.1, 7.2, 8.0, and 8.1 software. LG Advanced Flash (LAF) has a buffer overflow. The LG ID is LVE-SMP-190001 (March 2019).
A buffer overflow vulnerability exist in the web-based GUI of Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow an unauthenticated, remote attacker to execute arbitrary code.
Classic buffer overflow vulnerability while playing the specific video whose Decode picture buffer size is more than 16 in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in MDM9650, MSM8909W, MSM8996AU, QCS605, Qualcomm 215, SD 210/SD 212/SD 205, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 625, SD 632, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 820, SD 820A, SD 835, SD 845 / SD 850, SD 855, SD 8CX, SDA660, SDM439, SDM630, SDM660, Snapdragon_High_Med_2016, SXR1130
TP-Link Archer AX10(EU)_V1.2_230220 was discovered to contain a buffer overflow via the function FUN_131e8 - 0x132B4.
TOTOLINK A3002R v4.0.0-B20230531.1404 contains a buffer overflow vulnerability in /bin/boa via formParentControl.
TOTOLINK A3700R v9.1.2u.5822_B20200513 has a buffer overflow vulnerability in the ssid parameter in setWizardCfg function.
TOTOLINK A3100R V4.1.2cu.5050_B20200504 has a buffer overflow vulnerability in the http_host parameter in the loginauth function.
TOTOLINK A3700R v9.1.2u.5822_B20200513 has a buffer overflow vulnerability in the http_host parameter in the loginauth function.
In D-Link DIR-860L v2.03, there is a buffer overflow vulnerability due to the lack of length verification for the SID field in gena.cgi. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.
TOTOLINK A3100R V4.1.2cu.5050_B20200504 has a buffer overflow vulnerability in the password parameter in the loginauth function.
In TRENDnet TEW-752DRU FW1.03B01, there is a buffer overflow vulnerability due to the lack of length verification for the service field in gena.cgi. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.
An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), M(6.0), and N(7.0) software. There is a buffer overflow in the fps sysfs entry. The Samsung ID is SVE-2016-7510 (January 2017).
PingCAP TiDB v8.1.0 was discovered to contain a buffer overflow via the component expression.ExplainExpressionList. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. NOTE: PingCAP maintains that the actual reproduction of this issue did not cause the security impact of service interruption to other users. They argue that this is a complex query bug and not a DoS vulnerability.
A potential security vulnerability has been identified in certain HP PC products using AMI BIOS, which might allow arbitrary code execution. AMI has released firmware updates to mitigate this vulnerability.
A buffer overflow in the level parsing code of RobTop Games AB Geometry Dash v2.113 allows attackers to execute arbitrary code via entering a Geometry Dash level.
A stack overflow in FAST FW300R v1.3.13 Build 141023 Rel.61347n allows attackers to execute arbitrary code or cause a Denial of Service (DoS) via a crafted file path.
slpd-lite is a unicast SLP UDP server. Any OpenBMC system that includes the slpd-lite package is impacted. Installing this package is the default when building OpenBMC. Nefarious users can send slp packets to the BMC using UDP port 427 to cause memory overflow issues within the slpd-lite daemon on the BMC. Patches will be available in the latest openbmc/slpd-lite repository.
Tenda FH1201 v1.2.0.14 was discovered to contain a stack-based buffer overflow vulnerability via the mitInterface parameter in ip/goform/RouteStatic
An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), M(6.0), and N(7.0) (Exynos54xx, Exynos7420, Exynos8890, or Exynos8895 chipsets) software. There is a buffer overflow in the sensor hub. The Samsung ID is SVE-2016-7484 (January 2017).
An Buffer Overflow vulnerability leading to remote code execution was discovered in MEX01. Remote attackers can use this vulnerability by using the property that the target program copies parameter values to memory through the strcpy() function.
An issue was discovered on Samsung mobile devices with N(7.x) and O(8.0) software. The sem Trustlet has a buffer overflow that leads to arbitrary TEE code execution. The Samsung IDs are SVE-2018-13230, SVE-2018-13231, SVE-2018-13232, SVE-2018-13233 (December 2018).
Buffer Overflow vulnerability in btstack mesh commit before v.864e2f2b6b7878c8fab3cf5ee84ae566e3380c58 allows a remote attacker to execute arbitrary code via the pb_adv_handle_tranaction_cont function in the src/mesh/pb_adv.c component
NGINX before 1.13.6 has a buffer overflow for years that exceed four digits, as demonstrated by a file with a modification date in 1969 that causes an integer overflow (or a false modification date far in the future), when encountered by the autoindex module.
An issue was discovered on Samsung mobile devices with N(7.x) and O(8.x) software. There is an array overflow in a driver's input booster. The Samsung ID is SVE-2017-11816 (August 2018).
open5gs v2.6.4 is vulnerable to Buffer Overflow. via /lib/core/abts.c.
A vulnerability in /goform/SetStaticRouteCfg in the sub_519F4 function in Tenda AX1806 1.0.0.1 firmware leads to stack-based buffer overflow.
Buffer Overflow in coap_msg.c in FreeCoAP allows remote attackers to execute arbitrary code or cause a denial of service (stack buffer overflow) via a crafted packet.
Contiki-NG is an open-source, cross-platform operating system for IoT devices. In the RPL-Classic routing protocol implementation in the Contiki-NG operating system, an incoming DODAG Information Option (DIO) control message can contain a prefix information option with a length parameter. The value of the length parameter is not validated, however, and it is possible to cause a buffer overflow when copying the prefix in the set_ip_from_prefix function. This vulnerability affects anyone running a Contiki-NG version prior to 4.7 that can receive RPL DIO messages from external parties. To obtain a patched version, users should upgrade to Contiki-NG 4.7 or later. There are no workarounds for this issue.
A buffer overflow vulnerability exists in the httpd next_page functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger this vulnerability.This buffer overflow is in the next_page parameter in the gozila_cgi function.
In the Linux kernel, the following vulnerability has been resolved: of: module: add buffer overflow check in of_modalias() In of_modalias(), if the buffer happens to be too small even for the 1st snprintf() call, the len parameter will become negative and str parameter (if not NULL initially) will point beyond the buffer's end. Add the buffer overflow check after the 1st snprintf() call and fix such check after the strlen() call (accounting for the terminating NUL char).
Buffer overflow in pngpread.c in libpng before 1.2.44 and 1.4.x before 1.4.3, as used in progressive applications, might allow remote attackers to execute arbitrary code via a PNG image that triggers an additional data row.