IBM Robotic Process Automation 21.0.0 through 21.0.7.1 and 23.0.0 through 23.0.1 is vulnerable to incorrect privilege assignment when importing users from an LDAP directory. IBM X-Force ID: 262481.

IBM Security Verify Governance 10.0 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 225222.

IBM Security Verify Governance Identity Manager 10.0 virtual appliance component performs an operation at a privilege level that is higher than the minimum level required, which creates new weaknesses or amplifies the consequences of other weaknesses. IBM X-Force ID: 224989.

IBM Curam Social Program Management 8.0.0 and 8.0.1 does not invalidate session after logout which could allow an authenticated user to impersonate another user on the system.

IBM DS8900F HMC 89.21.19.0, 89.21.31.0, 89.30.68.0, 89.32.40.0, and 89.33.48.0 could allow a remote attacker to bypass authentication restrictions for authorized user. IBM X-Force ID: 269409.

IBM Administration Runtime Expert for i 7.2, 7.3, 7.4, and 7.5 could allow a local user to obtain sensitive information caused by improper authority checks. IBM X-Force ID: 265266.

IBM Personal Communications 14.05, 14.06, and 15.0.0 could allow a local user to escalate their privileges to the SYSTEM user due to overly permissive access controls. IBM X-Force ID: 260138.

IBM AIX 7.2, 7.3, and VIOS 3.1 could allow a non-privileged local user to exploit a vulnerability in the piodmgrsu command to obtain elevated privileges. IBM X-Force ID: 267964.

A Privilege Escalation Vulnerability exists in IBM Maximo Asset Management 7.5, 7.1, and 6.2, when WebSeal with Basic Authentication is used, due to a failure to invalidate the authentication session, which could let a malicious user obtain unauthorized access.

IBM AIX 7.2, 7.3, and VIOS 3.1 could allow a non-privileged local user to exploit a vulnerability in the piobe command to escalate privileges or cause a denial of service. IBM X-Force ID: 267968.

IBM AIX 7.2, 7.3, and VIOS 3.1 could allow a privileged local user to exploit a vulnerability in the qdaemon command to escalate privileges or cause a denial of service. IBM X-Force ID: 267972.

IBM Tivoli Key Lifecycle Manager 3.0.1 and 4.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 184156.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 174975.

GNU Bash through 4.3 processes trailing strings after function definitions in the values of environment variables, which allows remote attackers to execute arbitrary code via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution, aka "ShellShock." NOTE: the original fix for this issue was incorrect; CVE-2014-7169 has been assigned to cover the vulnerability that is still present after the incorrect fix.

IBM Robotic Process Automation 23.0.9 is vulnerable to privilege escalation that affects ownership of projects. IBM X-Force ID: 247527.

IBM Spectrum Fusion HCI 2.5.2 through 2.7.2 could allow an attacker to perform unauthorized actions in RGW for Ceph due to improper bucket access. IBM X-Force ID: 266807.

The Jakarta Multipart parser in Apache Struts 2 2.3.x before 2.3.32 and 2.5.x before 2.5.10.1 has incorrect exception handling and error-message generation during file-upload attempts, which allows remote attackers to execute arbitrary commands via a crafted Content-Type, Content-Disposition, or Content-Length HTTP header, as exploited in the wild in March 2017 with a Content-Type header containing a #cmd= string.

IBM Planning Analytics Local 2.0 could allow a remote attacker to upload arbitrary files, caused by the improper validation of file extensions. By sending a specially crafted HTTP request, a remote attacker could exploit this vulnerability to upload a malicious script, which could allow the attacker to execute arbitrary code on the vulnerable system. IBM X-Force ID: 265567.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.5, 6.1.0.0 through 6.1.0.4, and 6.1.1.0 through 6.1.1.1 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 215888.

IBM Cognos Analytics 11.2.1, 11.2.0, and 11.1.7 could allow a remote attacker to upload arbitrary files, caused by improper content validation. IBM X-Force ID: 211238.

IBM Spectrum Copy Data Management 2.2.13 and earlier could allow a remote attacker to access the Spring Boot console without authorization. IBM X-Force ID: 214523.

IBM Cognos Controller 10.4.1, 10.4.2, and 11.0.0 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 262183.

IBM Spectrum Copy Data Management 2.2.13 and earlier could allow a remote attacker to execute arbitrary commands on the system, caused by improper validation of user-supplied input by the Spectrum Copy Data Management Admin Console login and uploadcertificate function . A remote attacker could inject arbitrary shell commands which would be executed on the affected system. IBM X-Force ID: 214958.

The IBM i 7.2, 7.3, 7.4, and 7.5 product Facsimile Support for i contains a local privilege escalation vulnerability. A malicious actor could gain access to a command line with elevated privileges allowing root access to the host operating system. IBM X-Force ID: 262173.

IBM Security Verify Access 10.0.0.0, 10.0.1.0 and 10.0.2.0 with the advanced access control authentication service enabled could allow an attacker to authenticate as any user on the system. IBM X-Force ID: 215353.

IBM Observability with Instana 1.0.243 through 1.0.254 could allow an attacker on the network to execute arbitrary code on the host after a successful DNS poisoning attack. IBM X-Force ID: 259789.

IBM HMC (Hardware Management Console) 10.1.1010.0 and 10.2.1030.0 could allow a local user to escalate their privileges to root access on a restricted shell. IBM X-Force ID: 260740.

IBM QRadar SIEM 7.3, 7.4, and 7.5 in some situations may not automatically log users out after they exceede their idle timeout. IBM X-Force ID: 208341.

An authentication bypass vulnerability was discovered in an internal service of the Lenovo Fan Power Controller2 (FPC2) and Lenovo System Management Module (SMM) firmware during an that could allow an unauthenticated attacker to execute commands on the SMM and FPC2. SMM2 is not affected.

IBM Spectrum Virtualize 8.2, 8.3, and 8.4 could allow an attacker to allow unauthorized access due to the reuse of support generated credentials. IBM X-Force ID: 212609.

IBM Spectrum Protect Client and IBM Storage Protect for Virtual Environments 8.1.0.0 through 8.1.19.0 could allow a local user to execute arbitrary code on the system using a specially crafted file, caused by a DLL hijacking flaw. IBM X-Force ID: 259246.

IBM Informix JDBC Driver 4.10 and 4.50 is susceptible to remote code execution attack via JNDI injection when passing an unchecked argument to a certain API. IBM X-Force ID: 259116.

IBM Security Verify Governance 10.0 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 256016.

An authentication bypass vulnerability was discovered in the web interface of the Lenovo Fan Power Controller2 (FPC2) and Lenovo System Management Module (SMM) firmware that could allow an unauthenticated attacker to execute commands on the SMM and FPC2. SMM2 is not affected.

IBM Security Verify Access 10.0.0.0 through 10.0.6.1 uses insecure protocols in some instances that could allow an attacker on the network to take control of the server. IBM X-Force Id: 254957.

IBM Security Verify Access 10.0.0.0 through 10.0.6.1 uses insecure calls that could allow an attacker on the network to take control of the server. IBM X-Force ID: 254977.

IBM i 7.2, 7.3, 7.4, and 7.5 could allow a remote attacker to execute CL commands as QUSER, caused by an exploitation of DDM architecture. IBM X-Force ID: 254036.

IBM Maximo Asset Management 7.6.1.3 could allow a remote attacker to log into the admin panel due to improper access controls. IBM X-Force ID: 255073.

IBM Security Access Manager Container (IBM Security Verify Access Appliance 10.0.0.0 through 10.0.6.1 and IBM Security Verify Access Docker 10.0.6.1) could allow a local user to obtain root access due to improper access controls. IBM X-Force ID: 254658.

IBM Performance Tools for i 7.2, 7.3, 7.4, and 7.5 contains a local privilege escalation vulnerability. A malicious actor with command line access to the host operating system can elevate privileges to gain all object access to the host operating system. IBM X-Force ID: 254017.

The IBM i 7.2, 7.3, 7.4, and 7.5 product Facsimile Support for i contains a local privilege escalation vulnerability. A malicious actor with command line access to the host operating system can elevate privileges to gain root access to the host operating system. IBM X-Force ID: 254016.

IBM InfoSphere Information Server 11.7 is affected by a remote code execution vulnerability due to insecure deserialization in an RMI service. IBM X-Force ID: 255285.

IBM AIX 7.1, 7.2, 7.3, and VIOS 3.1 could allow a non-privileged local user to exploit a vulnerability in the invscout command to execute arbitrary commands. IBM X-Force ID: 251207.

IBM Spectrum Protect Backup-Archive Client 8.1.0.0 through 8.1.17.2 may allow a local user to escalate their privileges due to improper access controls.

IBM Informix JDBC Driver 4.10 and 4.50 is susceptible to remote code execution attack via JNDI injection when driver code or the application using the driver do not verify supplied LDAP URL in Connect String. IBM X-Force ID: 249511.

IBM AIX 7.1, 7.2, 7.3, and VIOS 3.1 could allow a non-privileged local user to exploit a vulnerability in the AIX runtime services library to execute arbitrary commands. IBM X-Force ID: 248421.

IBM Security Guardium Data Encryption (IBM Guardium Cloud Key Manager (GCKM) 1.10.3)) could allow a remote attacker to execute arbitrary code on the system, caused by an angular template injection flaw. By sending specially crafted request, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 248119.

IBM WebSphere Application Server 8.5 and 9.0 traditional could allow a remote attacker to execute arbitrary code on the system with a specially crafted sequence of serialized objects. IBM X-Force ID: 245513.

IBM Informix Dynamic Server 12.10 and 14.10 onsmsync is vulnerable to a heap buffer overflow, caused by improper bounds checking which could allow an attacker to execute arbitrary code. IBM X-Force ID: 250753.

IBM Db2 on Windows 10.5, 11.1, and 11.5 may be vulnerable to a privilege escalation caused by at least one installed service using an unquoted service path. A local attacker could exploit this vulnerability to gain elevated privileges by inserting an executable file in the path of the affected service. IBM X-Force ID: 249194.